Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cloud microphysics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Tropical anvil characteristics and water vapor of the tropical tropopause layer: Impact of heterogeneous and homogeneous freezing parameterizations

Abstract Two isolated deep convective clouds (DCCs) that developed in clean-humid and polluted-dry air masses, observed during the TWP-ICE and ACTIVE campaigns, are simulated using a 3-dimensional cloud-resolving model with size-resolved aerosol and cloud microphysics. We examine the impacts of different homogeneous and immersion freezing parameterizations on the anvil characteristics and the water vapor content (WVC) in the Tropical Tropopause Layer (TTL) for the two DCCs that developed in contrasting environments. The modeled cloud properties such as liquid/ice water path and precipitation generally agree with the available radar and satellite retrievals and in situ aircraft measurements. We find that anvil size and anvil microphysical properties such as ice number concentration and ice effective radius (rei) are much more sensitive to the homogeneous freezing parameterization (HomFP) under the polluted-dry condition, while the strength of anvil convection is more sensitive to HomFP under the clean-humid condition. Specifically, the cloud anvil with the Koop et al. (2000) (KOOP) relative humidity dependent scheme has up to 2 and 4 times lower ice number than those with other schemes (temperature dependent) for the clean humid and polluted-dry cases, respectively. Consequently, the rei is increased in both cases, with a larger increase in the polluted-dry case. As a result, extinction coefficient of cloud anvils is reduced by over 25% for the polluted-dry case. Anvil size and evolution are also much affected by HomFPs in the polluted-dry case. Higher immersion-freezing rates leads to a stronger convective cloud, with higher precipitation and ice water path under both humid and dry conditions. As a result, homogeneous freezing rates are enhanced by over 20%. Also, the higher immersion-freezing rate results in stronger convection in cloud anvils, much larger anvil size (up to 3 times) and longer lifetime. The moistening effect of deep convection on the WVC in the TTL is very significant with a increase of more than 2 times. Homogeneous freezing parameterizations do not significantly change the WVC in the TTL, but higher immersion freezing rate leads to an increase in TTL WVC by enhancing convection.

54 ENVIRONMENTAL SCIENCES↗

Tropical Oceanic Precipitation Processes Over Warm Pool: 2D and 3D Cloud Resolving Model Simulations

Rainfall is a key link in the hydrologic cycle as well as the primary heat source for the atmosphere. The vertical distribution of convective latent-heat release modulates the large-scale circulations of the topics. Furthermore, changes in the moisture distribution at middle and upper levels of the troposphere can affect cloud distributions and cloud liquid water and ice contents. How the incoming solar and outgoing longwave radiation respond to these changes in clouds is a major factor in assessing climate change. Present large-scale weather and climate model simulate processes only crudely, reducing confidence in their predictions on both global and regional scales. One of the most promising methods to test physical parameterizations used in General Circulation Models (GCMs) and climate models is to use field observations together with Cloud Resolving Models (CRMs). The CRMs use more sophisticated and physically realistic parameterizations of cloud microphysical processes, and allow for their complex interactions with solar and infrared radiative transfer processes. The CRMs can reasonably well resolve the evolution, structure, and life cycles of individual clouds and clouds systems. The major objective of this paper is to investigate the latent heating, moisture and momentum budgets associated with several convective systems developed during the TOGA COARE IFA - westerly wind burst event (late December, 1992). The tool for this study is the Goddard Cumulus Ensemble (GCE) model which includes a 3-class ice-phase microphysics scheme.

Tao, W.-K.↗

Deep Convection: Onset, Diurnal Cycle, and Role in Climate Variability and Sensitivity (Final Report)

The ASR SGP testbed for continuous modeling offers new opportunities to improve GCM parameterizations. We conducted an ASR investigation of convective and cloud microphysical processes that used existing ARM data as a testing ground for meaningful approaches to model evaluation and set the stage for later strategic use of the testbed to improve cumulus parameterizations and better understand deep convective cloud feedback. Our research consisted of the following tasks: Diurnal cycle of continental convection Deep convection at the SGP occurs in two forms: Organized mesoscale convection that originates upstream and produces peak precipitation at night; and local shallow convection that develops into deep convection that peaks in late afternoon. Local transitions are a logical next step from the shallow convection that will be the early focus of the testbed. This transition constrains entrainment and cold pools, since GCMs produce a continental rain peak near noon. We studied ARSCL-observed transition cases using the WRF, determined the sources of SCM diurnal cycle errors and made parameterization changes as appropriate. Factors controlling convective detrainment and anvil evolution Convective detrainment is a major source of high cloud ice water content and cloud forcing. The GISS GCM diagnoses a convective updraft speed profile, assumes a particle size distribution (PSD), and uses size-fallspeed relations to determine the fraction of condensate carried upward vs. precipitating. We used SCM case studies for TWP-ICE and MC3E for which vertical velocity has been retrieved to test whether entrainment improvements produce realistic updraft speeds and then improved the updraft microphysics parameterization. We compared detrained ice water contents and fall speeds to ARM and other field experiment data to refine the GCM’s fall speed and PSD assumptions. Role of convective cloud radiative processes in the Madden-Julian Oscillation (MJO) Changes in entrainment and rain evaporation and a cold pool parameterization have produced an MJO in the GISS GCM for the first time and allowed us to reproduce the KAZR dependence of convection depth on humidity during AMIE-Gan. We determined whether recent model changes including cold pools improve or degrade the MJO and made adjustments accordingly.

54 ENVIRONMENTAL SCIENCES↗

Collaborative Research: Cloudiness transitions within shallow marine clouds near the Azores

Marine stratocumulus clouds are low, persistent, liquid phase clouds that cover large areas and play a significant role in moderating the climate by reflecting large quantities of incoming solar radiation. The deficiencies in simulating these clouds in global climate models are widely recognized. Much of the uncertainty arises from sub-grid scale variability in the cloud albedo that is not accurately parameterized in climate models. The Clouds, Aerosol and Precipitation in the Marine Boundary Layer (CAP–MBL) observational campaign and the ongoing ARM site measurements on Graciosa Island in the Azores aim to sample the Northeast Atlantic low cloud regime. These data represent, the longest continuous research quality cloud radar/lidar/radiometer/aerosol data set of open-ocean shallow marine clouds in existence. Data coverage from CAP–MBL and the series of cruises to the southeast Pacific culminating in VOCALS will both be of sufficient length to contrast the two low cloud regimes and explore the joint variability of clouds in response to several environmental factors implicated in cloudiness transitions. Our research seeks to better understand cloud system processes in an underexplored but climatologically important maritime region. Our primary goal is an improved physical understanding of low marine clouds on temporal scales of hours to days. It is well understood that aerosols, synoptic-scale forcing, surface fluxes, mesoscale dynamics, and cloud microphysics all play a role in cloudiness transitions. However, the relative importance of each mechanism as a function of different environmental conditions is unknown. To better understand cloud forcing and response, we are documenting the joint variability of observed environmental factors and associated cloud characteristics. In order to narrow the realm of likely parameter ranges, we assess the relative importance of parameter conditions based primarily on two criteria: how often the condition occurs (frequency) and to what degree varying that condition within its typically observed range affects cloud characteristics (magnitude of impact given the condition). In this manner we will be able to address the relative importance of individual factors within a multivariate range of environmental conditions. We will determine the relative roles of the thermodynamic, aerosol, and synoptic environmental factors on low cloud and drizzle formation and lifetime.

54 ENVIRONMENTAL SCIENCES↗

Assessing the climate impact of an improved volcanic sulfate aerosol representation in E3SM

Accurately simulating historical surface temperature variations is essential for evaluating climate models, yet many struggle to reproduce the mid-20th-century temperature trends associated with significant volcanic eruptions. This study examines the impact of volcanic sulfate aerosol representation on these biases using the Energy Exascale Earth System Model (E3SM). The standard CMIP6 protocol prescribes volcanic forcing through radiative perturbations, omitting volcanic aerosol–cloud interactions (VACIs). Here, we implement an emission-based approach with an updated volcanic eruption inventory that directly incorporates volcanic sulfur dioxide (SO 2 ) emissions, enabling a more process-based representation of volcanic forcing. This approach leads to improved surface temperature variability and a modest reduction in cold biases between 1940 and 1980 compared to the CMIP6 setup. Additionally, we assess cloud property responses to a more realistic volcanic sulfate aerosol representation, which weakens cloud-induced cooling during periods of lower volcanic activity. However, despite these refinements, a significant temperature cold bias remains, indicating that further improvements in atmospheric chemistry, aerosol microphysics, cloud processes, and model parameterizations are needed to fully resolve this issue in E3SM.

54 ENVIRONMENTAL SCIENCES↗

View-Angle Dependent AIRS Cloud Radiances: Implication for Tropical Gravity Waves and Anvil Structures

Tropical anvil clouds play important roles in redistributing energy, water in the troposphere. Interacting with dynamics at a wide range of spatial and temporal scales, they can become organized internally and form structured cells, transporting momentum vertically and laterally. To quantify small-scale structures inside cirrus and anvils, we study view-dependence of the cloud-induced radiance from Atmospheric Infrared Sounder (AIRS) using channels near CO2 absorption line. The analysis of tropical eight-year (30degS-30degN, 2003-2010) data suggests that AIRS east-views observe 10% more anvil clouds than westviews during day (13:30 LST), whereas east-views and westviews observe equally amount of clouds at midnight (1 :30 LST). For entire tropical averages, AIRS oblique views observe more anvils than the nadir views, while the opposite is true for deep convective clouds. The dominance of cloudiness in the east-view cannot be explained by AIRS sampling and cloud microphysical differences. Tilted and banded anvil structures from convective scale to mesoscale are likely the cause of the observed view-dependent cloudiness, and gravity wave-cloud interaction is a plausible explanation for the observed structures. Effects of the tilted and banded cloud features need to be further evaluated and taken into account potentially in large-scale model parameterizations because of the vertical momentum transport through cloud wave breaking.

Wu, Dong L.↗

High sensitivity of simulated fog properties to parameterized aerosol activation in case studies from ParisFog

Aerosols influence fog properties such as visibility and lifetime by affecting fog droplet number concentrations (N d ). Numerical weather prediction (NWP) models often represent aerosol–fog interactions using highly simplified approaches. Incorporating prognostic size-resolved aerosol microphysics from climate models could allow them to simulate N d and aerosol–fog interactions without incurring excessive computational expense. However, microphysics code designed for coarse spatial resolution may struggle with sub-kilometer-scale grid spacings. Here, we test the ability of the UK Met Office Unified Model to simulate aerosol and fog properties during case studies from the ParisFog field campaign in 2011. We examine the sensitivity of fog properties to variations in N d caused by modifications to simulated aerosol activation. Our model, with a 500 m horizontal resolution and interactive aerosol and cloud microphysics, significantly underpredicts N d , although it only slightly underestimates the cloud condensation nuclei concentration. With an updated version of the Abdul-Razzak and Ghan (2000) activation scheme, we produce N d that are more consistent with those predicted by a cloud parcel model under fog-like conditions. We activate droplets only by adiabatic cooling. We incorporate more realistic hygroscopicities for sulfate and organic aerosols and explore the sensitivity of simulated N d to unresolved updrafts. We find that both N d and simulated fog liquid water content are very sensitive to the updated activation scheme but remain less affected by the update to hygroscopicities. Our improvements offer insights into the physical processes regulating N d in stable conditions, potentially laying foundations for improved operational fog forecasts that incorporate interactive aerosol simulations or aerosol climatologies.

Ghosh, Pratapaditya [Carnegie Mellon University, P↗

Mind-the-Gap - Part 3: Doppler Velocity Measurements From Space

Convective motions and hydrometeors microphysical properties are highly sought-after parameters for evaluating atmospheric numerical models. With most of the Earth’s surface covered by water, space-borne Doppler radars are ideal for acquiring such measurements at a global scale. While these systems have proven to be useful tools for retrieving cloud microphysical and dynamical properties from the ground, their adequacy, and specific requirements for spaceborne operation still need to be evaluated. Comprehensive forward simulations enable us to assess the advantages and drawbacks of six different Doppler radar architectures currently planned or under consideration by space agencies for the study of cloud dynamics. Radar performance is examined against state-of-the-art numerical model simulations of well-characterized shallow and deep, continental, and oceanic convective cases. Mean Doppler velocity (MDV) measurements collected at multiple frequencies (13, 35 and 94 GHz) provide complementary information in deep convective cloud systems. The high penetration capability of the 13-GHz radar enables to obtain a complete, albeit horizontally under-sampled, view of deep convective storms. The smaller instantaneous field of view (IFOV) of the 35-GHz radar captures more precise information about the location and size of convective updrafts above 5-8 km height of most systems which was determined is the portion of storms where the mass flux peak is typically located. Finally, the lower mean Doppler velocity uncertainty of displaced phase center antenna (DPCA) radars makes them an ideal system for studying microphysics in shallow convection and frontal systems, as well as ice and mixed-phase clouds. It is demonstrated that a 94-GHz DCPA system can achieve retrieval errors as low as 0.05-0.15 mm for raindrop volume-weighted mean diameter and 25% for rime fraction (for a -10 dBZ echo).

Pavlos Kollias↗

Persistent Supercooled Drizzle at Temperatures Below -25 °C Observed at McMurdo Station, Antarctica

The rarity of reports in the literature of brief and spatially limited observations of drizzle at temperatures below -20 degrees C suggest that riming and other temperature-dependent cloud microphysical processes such as heterogeneous ice nucleation and ice crystal depositional growth prevent drizzle persistence in cold environments. In this study, we report on a persistent drizzle event observed by ground-based remote sensing measurements at McMurdo Station, Antarctica. The temperatures in the drizzle-producing cloud were below -25 degrees C and the drizzle persisted for a period exceeding 7.5 hr. Using ground-based, satellite, and reanalysis data, we conclude that drizzle was likely present in parts of a widespread cloud field, which stretched more than similar to 1,000 km along the Ross Ice Shelf coast. Parameter space sensitivity tests using two-moment bulk microphysics in large eddy simulations constrained by the observations suggest that activated ice freezing nuclei and accumulation-mode aerosol number concentrations aloft during this persistent drizzle period were likely on the order of 0.2 L-1 and 20 cm -3 , respectively. In such constrained simulations, the drizzle moisture flux through cloud base exceeds that of ice. The simulations also indicate that drizzle can lead to the formation of multiple peaks in cloud water content profiles. This study suggests that persistent drizzle at these low temperatures may be common at the low aerosol concentrations typical of the Antarctic and Southern Ocean atmospheres.

54 ENVIRONMENTAL SCIENCES↗

Continuous Baseline Microphysical Retrieval (MICROBASE) Value-Added Product Report

This technical report describes the Continuous Baseline Microphysical Retrieval (MICROBASE) Value-Added Product (VAP) produced operationally by the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) User Facility. MICROBASE provides a continuous estimate of cloud microphysical properties at ARM fixed observatories and ARM Mobile Facility (AMF) sites. It is designed to run operationally and provide data to the ARM Data Center for scientific distribution. This technical report presents an overview of the VAP as a resource for data users and ongoing records for major updates to these products.

54 ENVIRONMENTAL SCIENCES↗

A robust aerosol impact on clouds along the subtropical to tropical transition

Marine clouds undergo a transition from subtropical stratocumulus (Sc) to shallow cumulus (Cu) and eventually to deep convective (DC) systems as air masses advect from the subtropics towards the deep tropics. How aerosols modulate this Lagrangian cloud evolution remains largely uncertain. Here we use both 5 years of satellite observations mapped along 8 d Lagrangian trajectories and complementary large-eddy simulations from 9 initiation locations across the Northeast Pacific, Southeast Pacific, and Southeast Atlantic. This Lagrangian framework allows us to quantify the aerosol effect and its co-variability with meteorological conditions on cloud microphysics, macrophysics, and top-of-atmosphere radiation through the full Sc-Cu-DC transition. We show that increasing aerosol concentrations leads to deeper and more reflective clouds throughout this cloud transition. Examining the thermodynamic evolution along the trajectory indicates a well-known trend: enhanced moistening near the boundary-layer top and lower free troposphere under polluted conditions, suggesting that part of the co-variability between aerosol and meteorological conditions may be internally driven. The agreement between model simulations and satellite data alongside the multi-basin coherence of the results indicates that aerosols systematically amplify cloud depth and reflectivity during the subtropical–to–tropical cloud transition.

54 ENVIRONMENTAL SCIENCES↗

Mind-the-gap - Part III: Doppler velocity measurements from space

Convective motions and hydrometeors microphysical properties are highly sought-after parameters for evaluating atmospheric numerical models. With most of the Earth's surface covered by water, space-borne Doppler radars are ideal for acquiring such measurements at a global scale. While these systems have proven to be useful tools for retrieving cloud microphysical and dynamical properties from the ground, their adequacy, and specific requirements for spaceborne operation still need to be evaluated. Comprehensive forward simulations enable us to assess the advantages and drawbacks of six different Doppler radar architectures currently planned or under consideration by space agencies for the study of cloud dynamics. Radar performance is examined against state-of-the-art numerical model simulations of well-characterized shallow and deep, continental, and oceanic convective cases. Mean Doppler velocity (MDV) measurements collected at multiple frequencies (13, 35 and 94 GHz) provide complementary information in deep convective cloud systems. The high penetration capability of the 13-GHz radar enables to obtain a complete, albeit horizontally under-sampled, view of deep convective storms. The smaller instantaneous field of view (IFOV) of the 35-GHz radar captures more precise information about the location and size of convective updrafts above 5-8 km height of most systems which was determined is the portion of storms where the mass flux peak is typically located. Finally, the lower mean Doppler velocity uncertainty of displaced phase center antenna (DPCA) radars makes them an ideal system for studying microphysics in shallow convection and frontal systems, as well as ice and mixed-phase clouds. It is demonstrated that a 94-GHz DCPA system can achieve retrieval errors as low as 0.05-0.15 mm for raindrop volume-weighted mean diameter and 25% for rime fraction (for a -10 dBZ echo).

54 ENVIRONMENTAL SCIENCES↗

Parameterization of Vertical Profiles of Governing Microphysical Parameters of Shallow Cumulus Cloud Ensembles Using LES with Bin Microphysics

Shallow convection is a subgrid process in cloud-resolving models for which their grid box is larger than the size of small cumulus clouds (Cu). At the same time such Cu substantially affect radiation properties and thermodynamic parameters of the low atmosphere. The main microphysical parameters used for calculation of radiative properties of Cu in cloud-resolving models are liquid water content (LWC), effective droplet radius, and cloud fraction (CF). In this study, these parameters of fields of small, warm Cu are calculated using large-eddy simulations (LESs) performed using the System for Atmospheric Modeling (SAM) with spectral bin microphysics. Despite the complexity of microphysical processes, several fundamental properties of Cu were found. First, despite the high variability of LWC and droplet concentration within clouds and between different clouds, the volume mean and effective radii per specific level vary only slightly. Second, the values of effective radius are close to those forming during adiabatic ascent of air parcels from cloud base. These findings allow for characterization of a cloud field by specific vertical profiles of effective radius and of mean liquid water content, which can be calculated using the theoretical profile of adiabatic liquid water content and the droplet concentration at cloud base. Using the results of these LESs, a simple parameterization of cloud-field-averaged vertical profiles of effective radius and of liquid water content is proposed for different aerosol and thermodynamic conditions. These profiles can be used for calculation of radiation properties of Cu fields in large-scale models. The role of adiabatic processes in the formation of microstructure of Cu is discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Vertical motions of the tropical convective cloud spectrum over Darwin, Australia

Three months of profiler observations from Darwin, Australia are separated into seven cloud types (shallow, mid‐level, and deep convective; weak and robust stratiform rain; and transitional and ice‐only anvil) to provide vertical velocity statistics on the full spectrum of tropical convective clouds over the course of a monsoon season. Consistent with past studies, convective updraughts increase in height and magnitude as the convective cloud height increases. Shallow/mid‐level/deep convection has a mean maximum value of 0.3 m s −1 at 3 km/0.6 m s −1 at 5 km/2.5 m s −1 at 8 km. Deep convective extremes approach 18 m s −1 above 8 km while downdraughts in all convective cloud types are maximum below 4 km. Stratiform vertical velocities are weaker and less varied than in active convection, with maximum mean values <0.25 m s −1 . However, stratiform rain regions associated with larger near‐surface reflectivities (and thus rain rates) have stronger mesoscale up‐ and downdraughts than weaker stratiform rain regions. Anvil cloud with little or no rain near the surface also exhibits mesoscale up‐ and downdraughts, but the vertical velocity profile is shifted up in height by at least 2 km. In addition, anvil updraughts were only 20–50% of the magnitudes in the stratiform rain region. Overall, the vertical motion statistics were similar across the pre‐, active and suppressed monsoon periods. The vertical velocity distributions for each cloud type were also generally consistent with the reflectivity distributions (i.e. the strongest updraughts were often linked to the largest reflectivities), allowing for some linkages between the dynamical and microphysical cloud properties. For example, strong updraughts above the 0 °C level in deep convection are associated with strongly sloping reflectivity profiles supporting the importance of cold rain growth processes, and stronger vertical motions are associated with stratiform rain that has a robust bright band.

Schumacher, Courtney↗

Precipitation Efficiency and Water Budget of Typhoon Fitow (2013): A Particle Trajectory Study

Here, the WRF Model is used to simulate the torrential rainfall of Typhoon Fitow (2013) over coastal areas of east China during its landfall. Data from the innermost model domain are used to trace trajectories of particles in three major 24-h accumulated rainfall centers using the Lagrangian flexible particle dispersion model (FLEXPART). Surface rainfall budgets and cloud microphysical budgets as well as precipitation efficiency are analyzed along the particles’ trajectories. The rainfall centers with high precipitation efficiency are associated with water vapor convergence, condensation, accretion of cloud water by raindrops, and raindrop loss/convergence. The raindrop loss/convergence over rainfall centers is supported by the raindrop gain/divergence over the areas adjacent to rainfall centers. Precipitation efficiency is mainly confirmed by hydrometeor loss/convergence. Hydrometeor loss/convergence corresponds to the hydrometeor flux convergence, which may be related to the increased vertical advection of hydrometeors in response to the upward motions and upward decrease of hydrometeors, whereas hydrometeor gain/divergence corresponds to the reduction in hydrometeor flux convergence, which may be associated with the decreased horizontal advection of hydrometeors in response to the zonal decrease in hydrometeors and easterly winds and the meridional increase in hydrometeors and southerly winds. The water vapor convergence and associated condensation do not show consistent relationships with orographic lifting all the time.

54 ENVIRONMENTAL SCIENCES↗

Improving the Representation of Snow Crystal Properties with a Single-Moment Mircophysics Scheme

Single-moment microphysics schemes are utilized in an increasing number of applications and are widely available within numerical modeling packages, often executed in near real-time to aid in the issuance of weather forecasts and advisories. In order to simulate cloud microphysical and precipitation processes, a number of assumptions are made within these schemes. Snow crystals are often assumed to be spherical and of uniform density, and their size distribution intercept may be fixed to simplify calculation of the remaining parameters. Recently, the Canadian CloudSat/CALIPSO Validation Project (C3VP) provided aircraft observations of snow crystal size distributions and environmental state variables, sampling widespread snowfall associated with a passing extratropical cyclone on 22 January 2007. Aircraft instrumentation was supplemented by comparable surface estimations and sampling by two radars: the C-band, dual-polarimetric radar in King City, Ontario and the NASA CloudSat 94 GHz Cloud Profiling Radar. As radar systems respond to both hydrometeor mass and size distribution, they provide value when assessing the accuracy of cloud characteristics as simulated by a forecast model. However, simulation of the 94 GHz radar signal requires special attention, as radar backscatter is sensitive to the assumed crystal shape. Observations obtained during the 22 January 2007 event are used to validate assumptions of density and size distribution within the NASA Goddard six-class single-moment microphysics scheme. Two high resolution forecasts are performed on a 9-3-1 km grid, with C3VP-based alternative parameterizations incorporated and examined for improvement. In order to apply the CloudSat 94 GHz radar to model validation, the single scattering characteristics of various crystal types are used and demonstrate that the assumption of Mie spheres is insufficient for representing CloudSat reflectivity derived from winter precipitation. Furthermore, snow density and size distribution characteristics are allowed to vary with height, based upon direct aircraft estimates obtained from C3VP data. These combinations improve the representation of modeled clouds versus their radar-observed counterparts, based on profiles and vertical distributions of reflectivity. These meteorological events are commonplace within the mid-latitude cold season and present a challenge to operational forecasters. This study focuses on one event, likely representative of others during the winter season, and aims to improve the representation of snow for use in future operational forecasts.

Molthan, Andrew L.↗

Geostationary Satellite Retrievals with Irradiances and Cloud Properties / Processed Data

The Geostationary Operational Environmental Satellite (GOES) records sky brightness temperatures and irradiances at several wavelengths. From these the cloud microphysical and optical properties can be routinely retrieved. These properties are derived using the technique proposed by Minnis et al. 2020, and is similar to the technique used for deriving cloud properties from Moderate Resolution Imaging Spectroradiometer (MODIS) data. The derived GOES properties for the duration of the second Wind Forecasting Improvement Project (WFIP2) within the domain are reported here. Nominally the retrieved dataset has a 30- minute temporal and a 9 km spatial resolution.

17 WIND ENERGY↗

An overview of the ORACLES (ObseRvations of Aerosols above CLouds and their intEractionS) project: aerosol–cloud–radiation interactions in the southeast Atlantic basin

Southern Africa produces almost a third of the Earth's biomass burning (BB) aerosol particles, yet the fate of these particles and their influence on regional and global climate is poorly understood. ORACLES (ObseRvations of Aerosols above CLouds and their intEractionS) is a 5-year NASA EVS-2 (Earth Venture Suborbital-2) investigation with three intensive observation periods designed to study key atmospheric processes that determine the climate impacts of these aerosols. During the Southern Hemisphere winter and spring (June-October), aerosol particles reaching 3-5 km in altitude are transported westward over the southeast Atlantic, where they interact with one of the largest subtropical stratocumulus (Sc) cloud decks in the world. The representation of these interactions in climate models remains highly uncertain in part due to a scarcity of observational constraints on aerosol and cloud properties, as well as due to the parameterized treatment of physical processes. Three ORACLES deployments by the NASA P-3 aircraft in September 2016, August 2017, and October 2018 (totaling ~350 science flight hours), augmented by the deployment of the NASA ER-2 aircraft for remote sensing in September 2016 (totaling ~100 science flight hours), were intended to help fill this observational gap. ORACLES focuses on three fundamental science themes centered on the climate effects of African BB aerosols: (a) direct aerosol radiative effects, (b) effects of aerosol absorption on atmospheric circulation and clouds, and (c) aerosol–cloud microphysical interactions. This paper summarizes the ORACLES science objectives, describes the project implementation, provides an overview of the flights and measurements in each deployment, and highlights the integrative modeling efforts from cloud to global scales to address science objectives. Significant new findings on the vertical structure of BB aerosol physical and chemical properties, chemical aging, cloud condensation nuclei, rain and precipitation statistics, and aerosol indirect effects are emphasized, but their detailed descriptions are the subject of separate publications. The main purpose of this paper is to familiarize the broader scientific community with the ORACLES project and the dataset it produced.

54 ENVIRONMENTAL SCIENCES↗