Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Chalcogenides”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

537 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

The intrinsic electrochemical behavior of layered Cu 2 WSe 4 nanoparticles

Nanoplates of Cu 2 WSe 4 (~50 nm) were synthesized via a hot-injection method by one-pot selenation of WCl 6 and Cu(acac) 2 . This synthetic route provided another perspective towards the intrinsic electrochemical properties of Cu 2 MSe 4 (M = Mo or W), where their nanoparticles were previously synthesized via a metathesis route. In conclusion, cations-dependent cathodic events and surface activation anodic events were identified by cyclic voltammetry in acetonitrile.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

P-type conductivity in Sn-doped Sb 2 Se 3

Abstract Antimony selenide (Sb 2 Se 3 ) is a promising absorber material for thin-film photovoltaics. However, certain areas of fundamental understanding of this material remain incomplete and this presents a barrier to further efficiency gains. In particular, recent studies have highlighted the role of majority carrier type and extrinsic doping in drastically changing the performance of high efficiency devices (Hobson et al 2020 Chem. Mater. 32 2621–30). Herein, Sn-doped Sb 2 Se 3 bulk crystals are shown to exhibit p-type conductivity using Hall effect and hot-probe measurements. The measured conductivities are higher than those achieved through native defects alone, but with a carrier density (up to 7.4 × 10 14 cm −3 ) several orders of magnitude smaller than the quantity of Sn included in the source material. Additionally, a combination of ultraviolet, x-ray and hard x-ray photoemission spectroscopies are employed to obtain a non-destructive depth profile of the valence band maximum, confirming p-type conductivity and indicating a majority carrier type inversion layer at the surface. Finally, these results are supported by density functional theory calculations of the defect formation energies in Sn-doped Sb 2 Se 3 , showing a possible limit on the carrier concentration achievable with Sn as a dopant. This study sheds light on the effectiveness of Sn as a p-type dopant in Sb 2 Se 3 and highlights avenues for further optimisation of doped Sb 2 Se 3 for solar energy devices.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Majorana zero modes in a heterogeneous structure of topological and trivial domains in FeSe 1−𝑥 ⁢Te 𝑥

Here, we propose that the existence of vortices in FeSe 1−𝑥 ⁢Te 𝑥 with and without Majorana zero modes (MZMs) can be explained by a heterogeneous mixture of strong topological and trivial superconducting domains, with only vortices in the former exhibiting MZMs. We identify the spectroscopic signatures of topological and trivial vortices and show that they are necessarily separated by a domain wall harboring Majorana edge modes. We demonstrate that when a vortex is moved from a trivial to a topological domain in real time, a domain wall Majorana edge mode is transferred to the vortex as an MZM.

Majorana bound states↗
DOE OSTI2021

Metastable piezoelectric group-IV monochalcogenide monolayers with a buckled honeycomb structure

Multiple two-dimensional materials are being naïvely termed stable on the grounds of displaying phonon dispersions with no negative frequencies and of not collapsing on molecular dynamics calculations at fixed volume. But, if these phases do not possess the smallest possible structural energy, how does one understand and establish their actual meta stability? To answer this question, twelve two-dimensional group-IV monochalcogenide monolayers (SiS, SiSe, SiTe, GeS, GeSe, GeTe, SnS, SnSe, SnTe, PbS, PbSe, and PbTe) with a buckled honeycomb atomistic structure—belonging to symmetry group P3m1—displaying an out-of-plane intrinsic electric polarization are shown to be metastable by three independent methods. First, we uncover a coordination-preserving structural transformation from the low-buckled honeycomb structure onto the lower-energy Pnm2 1 (or Pmmn for PbS, PbSe, and PbTe) phase to estimate energy barriers E B that must be overcome during such structural transformation. Using the curvature of the local minima and E B as inputs to Kramers escape formula, large escape times are found, implying the structural metastability of the buckled honeycomb phase (with the exception of PbS and PbSe, these phases display escape times ranging from 700 years to multiple times the age of the universe and can be considered “stable” for practical purposes in that relative sense). The second demonstration is provided by phonon dispersion relations that include the effect of long-range Coulomb forces and display no negative vibrational modes. The third and final demonstration of structural metastability is furnished by room-temperature ab initio molecular dynamics for selected compounds. Here, the magnitude of the electronic band gap evolves with chemical composition. Different from other binary two-dimensional compounds such as transition metal dichalcogenide monolayers and hexagonal boron nitride monolayers which only develop an in-plane piezoelectric response, the twelve group-IV monochalcogenide monolayers with a buckled honeycomb structure also display out-of-plane piezoelectric properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Enhanced superconductivity and electron correlations in intercalated ZrTe 3

We report charge density waves (CDWs) with superconductivity, competing Fermi surface instabilities, and collective orders have captured much interest in two-dimensional van der Waals (vdW) materials. Understanding the CDW suppression mechanism, its connection to the emerging superconducting state, and electronic correlations provides opportunities for engineering the electronic properties of vdW heterostructures and thin-film devices. Using a combination of the thermal transport, x-ray photoemission spectroscopy, Raman measurements, and first-principles calculations, we observe an increase in electronic correlations of the conducting states as the CDW is suppressed in ZrT e3 with 5% Cu and Ni intercalation in the vdW gap. As superconductivity emerges, intercalation brings not only decoupling of quasi-one-dimensional conduction electrons with phonons as a consequence of intercalation-induced lattice expansion but also a drastic increase in Zr 2+ at the expense of Zr 4+ metal atoms. These observations not only demonstrate the potential of atomic intercalates in the vdW gap for ground-state tuning but also illustrate the crucial role of the Zr metal valence in the formation of collective electronic orders.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Layer-dependent optically induced spin polarization in InSe

Optical control of spin in semiconductors has been pioneered using nanostructures of III-V and II-VI semi-conductors, but the emergence of two-dimensional van der Waals materials offers an alternative low-dimensional platform for spintronic phenomena. Indium selenide (InSe), a group-III monochalcogenide van der Waals material, has shown promise for optoelectronics due to its high electron mobility, tunable direct band gap, and quantum transport. In addition to these confirmed properties, there are predictions of spin-dependent optical selection rules, suggesting the potential for all-optical excitation and control of spin in a two-dimensional layered material. Despite these predictions, layer-dependent optical spin phenomena in InSe have yet to be explored. Here, we present measurements of layer-dependent optical spin dynamics in few-layer and bulk InSe. Polarized photoluminescence reveals layer-dependent optical orientation of spin, thereby demonstrating the optical selection rules in few-layer InSe. Spin dynamics are also studied in many-layer InSe using time-resolved Kerr rotation spectroscopy. By applying out-of-plane and in-plane static magnetic fields for polarized emission measurements and Kerr measurements, respectively, the g factor for InSe was extracted. Further investigations are done by calculating precession values using a k · p model, which is supported by ab initio density functional theory. Comparison of predicted precession rates with experimental measurements highlights the importance of excitonic effects in InSe for understanding spin dynamics. In conclusion, optical orientation of spin is an important prerequisite for optospintronic phenomena and devices, and these first demonstrations of layer-dependent optical excitation of spins in InSe lay the foundation for combining layer-dependent spin properties with advantageous electronic properties found in this material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

MoS 2 -supported Au 31 for CO hydrogenation: A first-principle study

While the basal plane of single-layer molybdenum disulphide (MoS 2 ) is inert, attempts have been made to functionalize it chemically through the creation of defects and/or addition of dopants. With nanoparticles as dopants, the authors present density functional theory-based calculations of the hydrogenation of CO on a 31-atom, bilayer Au cluster supported on single-layer MoS 2 (Au31/MoS 2 ). Not surprisingly, the adsorption and reaction of all species involved in the hydrogenation occur at the edges of the cluster—the regions at which the interaction between MoS 2 and the Au cluster is tracked to be the strongest. The authors find two possible mechanisms that lead to the formation of methanol: (1) CO* → CHO* → CH 2 O* → CH 3 O* → CH 3 OH* and (2) CO* → CHO* → HCOH* → CH2OH* → CH3OH*, where * indicates the adsorbed species. Detailed analysis of the reaction pathways, however, does not result in favoring one mechanism over the other. Rather, both mechanisms are facile. In addition, the rate-limiting step in each mechanism is found to be the formation of the formyl radical group (CO* + H* → CHO*).

2D materials↗
DOE OSTI2022

Nucleation and growth of molybdenum disulfide grown by thermal atomic layer deposition on metal oxides

To enable greater control over thermal atomic layer deposition (ALD) of molybdenum disulfide (MoS 2 ), here we report studies of the reactions of molybdenum hexafluoride (MoF 6 ) and hydrogen sulfide (H 2 S) with metal oxide substrates from nucleation to few-layer films. In situ quartz crystal microbalance experiments performed at 150, 200, and 250 °C revealed temperature-dependent nucleation behavior of the MoF 6 precursor, which is attributed to variations in surface hydroxyl concentration with temperature. In situ Fourier transform infrared spectroscopy coupled with ex situ x-ray photoelectron spectroscopy (XPS) indicated the presence of molybdenum oxide and molybdenum oxyfluoride species during nucleation. Density functional theory calculations additionally support the formation of these species as well as predicted metal oxide to fluoride conversion. Residual gas analysis revealed reaction by-products, and the combined experimental and computational results provided insights into proposed nucleation surface reactions. With additional ALD cycles, Fourier transform infrared spectroscopy indicated steady film growth after ~13 cycles at 200 °C. XPS revealed that higher deposition temperatures resulted in a higher fraction of MoS 2 within the films. Deposition temperature was found to play an important role in film morphology with amorphous films obtained at 200 °C and below, while layered films with vertical platelets were observed at 250 °C. Finally, these results provide an improved understanding of MoS 2 nucleation, which can guide surface preparation for the deposition of few-layer films and advance MoS 2 toward integration into device manufacturing.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Artificial-Intelligence Aided Design and Synthesis of Novel Layered 2D Multi-Principal Element Materials for Energy Storage (Final Report)

This DOE-EPSCoR project aimed to predict, synthesize, and characterize novel layered two-dimensional (2D) high-entropy materials (HEMs). These 2D-HEMs, composed of multiple principal elements in nearly equal concentrations, are distinct from traditional 2D materials (typically containing two or three elements) and conventional alloys (dominated by a single primary element with minor secondary additions). Their unique structural and compositional features enable significant lattice strain accommodation, resulting in enhanced electrode performance and potential applications in catalysis, hydrogen storage, sensing, quantum information technologies, and flexible electronics. The research focused on addressing four fundamental questions: (i) What combinations of elements can form stable and synthesizable 2D-HEMs? (ii) What mechanisms drive the stability and synthesizability of crystalline single-phase 2D-HEMs? (iii) How do local chemical disorder and defects influence the macroscopic electronic and mechanical properties? and (iv) What charge storage mechanisms are active in selectively synthesized 2D-HEMs for battery and supercapacitor electrode applications? To achieve these goals, the project employed an integrated theory-experiment approach, incorporating high-throughput first-principles calculations, theoretical modeling, data mining, experimental synthesis, and advanced characterization techniques. The advanced computing resources and state-of-the-art experimental characterization facilities at Oak Ridge National Laboratory (ORNL) were leveraged through collaboration. Beyond scientific advancements, the project contributed to workforce development. Two postdoctoral researchers and three graduate students at the University of Maine were trained through co-advising by ORNL scientists and collaborative interactions, strengthening their expertise in cutting-edge materials science.

36 MATERIALS SCIENCE↗
DOE OSTI2022

High Seebeck Coefficient from Screen-Printed Colloidal PbSe Nanocrystals Thin Film

Thin-film thermoelectrics (TEs) with a thickness of a few microns present an attractive opportunity to power the internet of things (IoT). Here, we propose screen printing as an industry-relevant technology to fabricate TE thin films from colloidal PbSe quantum dots (QDs). Monodisperse 13 nm-sized PbSe QDs with spherical morphology were synthesized through a straightforward heating-up method. The cubic-phase PbSe QDs with homogeneous chemical composition allowed the formulation of a novel ink to fabricate 2 μm-thick thin films through robust screen printing followed by rapid annealing. A maximum Seebeck coefficient of 561 μV K -1 was obtained at 143 °C and the highest electrical conductivity of 123 S m -1 was reached at 197 °C. Power factor calculations resulted in a maximum value of 2.47 × 10 -5 W m -1 K -2 at 143 °C. To the best of our knowledge, the observed Seebeck coefficient value is the highest reported for TE thin films fabricated by screen printing. Thus, this study highlights that increased Seebeck coefficients can be obtained by using QD building blocks owing to quantum confinement.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Close-Space Sublimation-Deposited Ultra-Thin CdSeTe/CdTe Solar Cells for Enhanced Short-Circuit Current Density and Photoluminescence

This work describes the complete fabrication process of thin-absorber cadmium selenium telluride/cadmium telluride photovoltaic devices for enhanced efficiency. Here, the process utilizes an automated in-line vacuum system for close-space sublimation deposition which is scalable from fabrication of small area research devices to large-scale modules.

14 SOLAR ENERGY↗
DOE OSTI2023

2023 American Society for Mass Spectrometry (ASMS) 71st Annual Conference on Mass Spectrometry and Allied Topics

Title (20 words): The investigation of the mechanism for the water splitting by holmium oxide nitrate complex in gas-phase Introduction (120 words): The studies for hydrogen from water splitting is important for clean energy economy as molecular hydrogen is a potential energy carrier. Therefore, understanding the fundamental chemistry of water splitting is essential. The water splitting activated by [Ho(NO3)4]- was previously studied. The suggested mechanism was to first eliminate •NO2 from [Ho(NO3)4]- to make [HoO(NO3)3]-. Then, water was added to form [HoO(NO3)3(H2O)]-, followed by eliminating the •OH to form [HoOH(NO3)3]-. However, we proposed a new mechanism with the formation of [Ho(NO3)3]- prior to the water addition. Once water is added to this intermediate to make [Ho(NO3)3(H2O)]-, the •H is eliminated to form [HoOH(NO3)3]-. Here we have used a labeled experiments with 18-O nitrates. The results to support the new mechanism are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Preparation and Characterization of YBa 2 Cu 4 O 8 Superconductor

Solid-state reaction of appropriate amounts of Y 2 O 3 , BaCOs, and CuO for 2 h at 800°C in flowing oxygen with a total pressure of 2.7 x 10 2 Pa (2 mm Hg), followed by cooling and annealing at 750°C for 10 h in oxygen at ambient pressure, has produced orthorhombic YBa 2 Cu 4 O 8 (124) as the main phase with YBa 2 Cu 3 O x (123) as an impurity phase. After the as-calcined powder was annealed in oxygen at 800°C for 24 h under ambient pressure, the phase purity improved considerably. Calcined 124 powder was pressed into pellets and rapidly annealed at temperatures from 870°C to 935°C. At these temperatures, the 124 decomposed into 123. The superconducting transition temperature, T c , of the annealed samples depended upon the annealing temperature and atmosphere. The decomposed samples have been characterized by low field RF SQUID magnetometer and high resolution transmission electron microscopy.

36 MATERIALS SCIENCE↗