Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CONFIGURABLE APPLICATIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Ps and Qs: Quantization-Aware Pruning for Efficient Low Latency Neural Network Inference

Efficient machine learning implementations optimized for inference in hardware have wide-ranging benefits, depending on the application, from lower inference latency to higher data throughput and reduced energy consumption. Two popular techniques for reducing computation in neural networks are pruning, removing insignificant synapses, and quantization, reducing the precision of the calculations. In this work, we explore the interplay between pruning and quantization during the training of neural networks for ultra low latency applications targeting high energy physics use cases. Techniques developed for this study have potential applications across many other domains. We study various configurations of pruning during quantization-aware training, which we term quantization-aware pruning, and the effect of techniques like regularization, batch normalization, and different pruning schemes on performance, computational complexity, and information content metrics. We find that quantization-aware pruning yields more computationally efficient models than either pruning or quantization alone for our task. Further, quantization-aware pruning typically performs similar to or better in terms of computational efficiency compared to other neural architecture search techniques like Bayesian optimization. Surprisingly, while networks with different training configurations can have similar performance for the benchmark application, the information content in the network can vary significantly, affecting its generalizability.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Improved VHF direction finding system

Direction finding device operating at very high frequencies requires a loop antenna, mechanical rotation, and large structures. The system is applicable to an unmanned configuration. Direction information is extracted in the form of a direction cosine analog.

Graf, E. R.↗

Development of a core sheath process for production of oxide fibers

Improvements were sought in an oxide fiber of a core sheath configuration intended for structural applications at 2000 F (1093 C). Discontinuities in the core were eliminated by using core materials other than pure alumina, and continuous core sheath fibers were produced. In the case of some core materials, the continuous sections were sufficiently long for applications in short fiber composites. Creep at 2000 F (1093 C) was found to be due, in most cases, to breaks in the core, allowing the glass sheath to creep. Evidence was obtained indicating that a closer match between the thermal expansion coefficient of the sheath and the core would greatly improve the strength.

Freske, S.↗

LOXT mirror design study

The final report for the large orbiting X-ray telescope (LOXT) high resolution mirror design study is presented. The following tasks were performed: (1) Generation of a reference and alternate preliminary design for the LOXT high resolution mirror assembly, which will meet the LOXT scientific requirements, and are within the present state of the art of materials and fabrication techniques. (2) Measurement, in X-rays, of the scattering properties of a variety of optical flats, embodying materials, coatings, and polishing techniques which might be applicable to the flight configuration LOXT high resolution mirror. (3) Preparation of a procurement specification for a paraboloid test mirror of the size of the innermost paraboloid of the high resolution mirror assembly, including the design requirements for the reference design evolved from this preliminary design study. The results of the engineering and scientific analysis and the conclusions drawn are presented. The procurement specification for the test mirror is included.

Vanspeybroeck, L.↗

Solar absorptance of second surface mirrors for high angles of incidence

Recent measurements have indicated an increase rather than a decrease in the solar absorptivity of second surface mirrors at angles of incidence greater than 80 deg. These observations stimulated an analytical effort which revealed that the increase does occur. Using electromagnetic wave theory, the solar absorptance equations for the mirror configurations commonly encountered in application are developed. An increase in mirror solar absorptance has also been deduced from the temperatures of a second surface mirrored radiator being monitored on the Nimbus E microwave spectrometer experiment. Test and calculated results substantiating the solar absorptance increase are presented.

Stultz, J. W.↗

Theoretical and experimental study on the ejector augmented jet flap

The analytical concept used in determining the characteristics of jet flap or related propulsive systems suitable for VTOL and STOL applications was examined. The configuration chosen was a two dimensional wing with a biplane flap, having a jet injected on the upper surface of the wing at the flap hinge axis and discharging into the channel between the two elements of the flap. The experimental work was conducted in a two dimensional test installation in a subsonic wind tunnel. The model description, the test conditions, and a summary of the experimental results are presented.

Stewart, H. J.↗

STS users study (study 2.2). Volume 3: Ancillary equipment study

The multi-mission support equipment (MMSE) applicable to six payloads is studied. Tables indicate individual satellite projects to which each MMSE is applicable, and which equipments are applicable to multiple payload configurations when more than one project's payload would be flown on the STS. An estimate of the first date on which interface definition information needed by a payload project are also shown.

Pritchard, E. I.↗

Design, building and test of one prototype and four final position sensor assemblies: Hall effect position sensors

This report covers the development of a three channel Hall effect position sensing system for the commutation of a three phase dc torquer motor. The effort consisted of the evaluation, modification and re-packaging of a commercial position sensor and the design of a target configuration unique to this application. The resulting design meets the contract requirements and, furthermore, the test results indicate not only the practicality and versatility of the design, but also that there may be higher limits of resolution and accuracy achievable.

Source record↗

Lift/cruise fan V/STOL technology aircraft design definition study. Volume 2: Propulsion transmission system design

Two types of lift/cruise fan technology aircraft were conceptually designed. One aircraft used turbotip fans pneumatically interconnected to three gas generators, and the other aircraft used variable pitch fans mechanically interconnected to three turboshaft engines. The components of each propulsion transmission system were analyzed and designed to the depth necessary to determine areas of risk, development methods, performance, weights and costs. The types of materials and manufacturing processes were identified to show that the designs followed a low cost approach. The lift/cruise fan thrust vectoring hoods, which are applicable to either aircraft configuration, were also evaluated to assure a low cost/low risk approach.

Obrien, W. J.↗

Modeling and parameter uncertainties for aircraft flight control system design

As aircraft designs trend toward further applications of control-configured vehicle concepts, aircraft control systems increasingly rely on stability augmentation to obtain normal flying qualities and reasonable structural margins. Although the control system designer would choose to have a perfect dynamic description of the vehicle, he knows that a level of uncertainty of plant dynamics will exist. This paper gives typical values of plant uncertainties for some recent aircraft design and development programs. Histories of pertinent aerodynamic, inertial, and structural parameters from program initiation to aircraft certification are given. These data can be used as typical of future vehicles so that control system design concepts can be evaluated with due consideration to their sensitivity to uncertainties in plant dynamics.

Rickard, W. W.↗

Advanced panel-type influence coefficient methods applied to unsteady three dimensional potential flows

A panel method for solving unsteady, subsonic wind-body-tail flow problems is formulated and partially verified. The method is applicable to general aircraft configurations consisting of arbitrary arrangements of wings, bodies, tails, and nacelles. The wake may be located arbitrarily and the unsteady, transverse component of vorticity in the wake may be assigned any covection velocity. The wake in the unsteady flow problem, therefore, can be given the location and convection velocity of the wake produced by a steady flow which is the mean flow of the unsteady flow problem. The panel method has been used as a basis for expanding the unsteady kernel function in a power series to obtain panel influence coefficients which can be integrated in closed form.

Dusto, A. R.↗

Discrete-time pilot model

Pilot behavior is considered as a discrete-time process where the decision making has a sequential nature. This model differs from both the quasilinear model which follows from classical control theory and from the optimal control model which considers the human operator as a Kalman estimator-predictor. An additional factor considered is that the pilot's objective may not be adequately formulated as a quadratic cost functional to be minimized, but rather as a more fuzzy measure of the closeness with which the aircraft follows a reference trajectory. All model parameters, in the digital program simulating the pilot's behavior, were successfully compared in terms of standard-deviation and performance with those of professional pilots in IFR configuration. The first practical application of the model was in the study of its performance degradation when the aircraft model static margin decreases.

Cavalli, D.↗

Prediction of the acoustic environment in the Space Shuttle payload bay

An analytical model has been developed to predict space-averaged sound levels in the payload bay of the Space Shuttle when the bay is empty or when a payload is present. The model utilizes the power flow concept and takes into account net power flow from the exterior, flow between subvolumes surrounding a payload, and power dissipation in the subvolumes. The characteristics of the model are described and its application to the Spacelab Configuration 1 payload is presented to illustrate the type of results obtained.

Wilby, J. F.↗

Procedure M - An advanced procedure for stratified area estimation using Landsat

Procedure M is a systematic approach to processing multispectral scanner data for classification and acreage estimation. The procedure incorporates a statistically robust mechanism for estimation while utilizing component technologies that are based on the physically expected or measured responses of the canopy, atmosphere and sensor. This paper describes Procedure M in the context of large-area agricultural applications, emphasizing three specific configurations: for winter wheat, spring small grains, and corn and soybeans.

Holmes, Q. A.↗

An advanced programmable/reconfigurable color graphics display system for crew station technology research

The hardware configuration, software organization, and applications software for the NASA IKONAS color graphics display system are described. The systems were created at the Langley Research Center Display Device Laboratory to develop, evaluate, and demonstrate advanced generic concepts, technology, and systems integration techniques for electronic crew station systems of future civil aircraft. A minicomputer with 64K core memory acts as a host for a raster scan graphics display generator. The architectures of the hardware system and the graphics display system are provided. The applications software features a FORTRAN-based model of an aircraft, a display system, and the utility program for real-time communications. The model accepts inputs from a two-dimensional joystick and outputs a set of aircraft states. Ongoing and planned work for image segmentation/generation, specialized graphics procedures, and higher level language user interface are discussed.

Montoya, R. J.↗

Generation of three-dimensional boundary-fitted curvilinear coordinate systems for wing/wing-tip geometries using the elliptic solver method

A three-dimensional elliptic solver technique is utilized to generate surface-fitted coordinates about wing/wing-tip configurations. The method is applicable to wings of arbitrary section profile and camber, leading-edge sweep, taper ratio, and spanwise thickness variation. The basic theory of three-dimensional elliptic mappings is developed along with a method to compute interior coordinate control functions. Examples of grids generated about several wing/wing-tip geometries are given. A 49 x 33 x 17 grid requires about 3 minutes of CPU time on a CYBER 203 computer.

Thames, F. C.↗

Automatic weld torch guidance control system

A highly reliable, fully digital, closed circuit television optical, type automatic weld seam tracking control system was developed. This automatic tracking equipment is used to reduce weld tooling costs and increase overall automatic welding reliability. The system utilizes a charge injection device digital camera which as 60,512 inidividual pixels as the light sensing elements. Through conventional scanning means, each pixel in the focal plane is sequentially scanned, the light level signal digitized, and an 8-bit word transmitted to scratch pad memory. From memory, the microprocessor performs an analysis of the digital signal and computes the tracking error. Lastly, the corrective signal is transmitted to a cross seam actuator digital drive motor controller to complete the closed loop, feedback, tracking system. This weld seam tracking control system is capable of a tracking accuracy of + or - 0.2 mm, or better. As configured, the system is applicable to square butt, V-groove, and lap joint weldments.

Smaith, H. E.↗