Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “COLLIDER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Search for the Standard Model Higgs boson produced in association with a W Boson in the isolated-track charged-lepton channel using the Collider Detector at Fermilab

The Higgs boson is the only elementary particle predicted by the Standard Model (SM) that has not yet been observed experimentally. If it exists, it explains the spontaneous electroweak symmetry breaking and the origin of mass for gauge bosons and fermions. We test the validity of the SM by performing a search for the associated production of a Higgs boson and a W boson in the channel where the Higgs boson decays to a bottom-antibottom quark pair and the W boson decays to a charged lepton and a neutrino (the WH channel). We study a dataset of proton-antiproton collisions at a centre-of-mass energy √s = 1.96 TeV provided by the Tevatron accelerator, corresponding to an integrated luminosity of 5.7 fb -1 , and recorded using the Collider Detector at Fermilab (CDF).We select events consistent with the signature of exactly one charged lepton (electron or muon), missing transverse energy due to the undetected neutrino (MET) and two collimated streams of particles (jets), at least one of which is required to be identified as originating from a bottom quark. We improve the discrimination of Higgs signal from backgrounds through the use of an artificial neural network. Using a Bayesian statistical inference approach, we set for each hypothetical Higgs boson mass in the range 100-150 GeV/c 2 with 5 GeV/c 2 increments a 95% credibility level (CL) upper limit on the ratio between the Higgs production cross section times branching fraction and the SM prediction. Our main original contributions are the addition of a novel charged lepton reconstruction algorithm with looser requirements (ISOTRK) with respect the electron or muon tight criteria (TIGHT), as well as the introduction of a novel trigger-combination method that allows to maximize the event yield while avoiding trigger correlations and that is used for the ISOTRK category. The ISOTRK candidate is a high-transverse-momentum good-quality track isolated from other activity in the tracking system and not required to match a calorimeter cluster, as for a tight electron candidate, or an energy deposit in the muon detector, as for a tight muon candidate. The ISOTRK category recovers real charged leptons that otherwise would be lost in the non-instrumented regions of the detector. This allows the reconstruction of more W boson candidates, which in turn increases the number of reconstructed WH signal candidate events, and therefore improves the sensitivity of the WH search. For the TIGHT charged lepton categories, we employ charged-lepton-dedicated triggers to improve the rate of WH signal acceptance during data taking. Since there is no ISOTRK-dedicated trigger at CDF, for the ISOTRK charged lepton category we employ three MET-plus-jets-based triggers. For each trigger we first identify the jet selection where the trigger efficiency is flat with respect to jet information (transverse energy and direction of motion in the transverse plane for the two jets in the event) and then we parametrize the trigger efficiency as a function of trigger MET. On an event-by-event basis, for each trigger we compute a trigger efficiency as a function of trigger parametrization, trigger MET, jet information, trigger prescale and information about whether the trigger is defined or not. For the ISOTRK category we combine the three triggers using a novel method, which allows the combination of any number of triggers in order to maximize the event yield while avoiding trigger correlations. On an event-by-event basis, only the trigger with the largest efficiency is used. By avoiding a logical 'OR' between triggers, the loss in the yield of events accepted by the trigger combination is compensated by a smaller and easier-to-compute corresponding systematic uncertainty. The addition of the ISOTRK charged lepton category to the TIGHT category produces an increase of 33% in the WH signal yield and a decrease of 15.5% to 19.0% in the median expected 95% CL cross-section upper limits across the entire studied Higgs mass interval. The improvement in analysis sensitivity is smaller than the improvement in signal yield because the ISOTRK category has a smaller signal over background ratio than the TIGHT category, due to the looser ISOTRK reconstruction criteria. The observed (median expected) 95% CL SM Higgs upper limits on cross section times branching ratio vary between 2.39 x SM (2.73 x SM) for a Higgs mass of 100 GeV/c 2 to 31.1 x SM (31.2 x SM) for a Higgs mass of 150 GeV/c 2 , while the value for a 115 GeV/c 2 Higgs boson is that of 5.08 x SM (3.79 x SM). The novel trigger combination method is already in use by several CDF analyses. It is applicable to any analysis that uses triggers based on MET and jets, such as supersymmetry searches at the ATLAS and CMS experiments at the Large Hadron Collider. In its most general form, the method can be used by any analysis that combines any number of different triggers.

43 PARTICLE ACCELERATORS↗

Interim report on the Global Design Effort Global International Linear Collider (ILC) R&D

The International Linear Collider: A Technical Progress Report marks the halfway point towards the Global Design Effort fulfilling its mandate to follow up the ILC Reference Design Report with a more optimised Technical Design Report (TDR) by the end of 2012. The TDR will be based on much of the work reported here and will contain all the elements needed to propose the ILC to collaborating governments, including a technical design and implementation plan that are realistic and have been better optimised for performance, cost and risk. We are on track to develop detailed plans for the ILC, such that once results from the Large Hadron Collider (LHC) at CERN establish the main science goals and parameters of the next machine, we will be in good position to make a strong proposal for this new major global project in particle physics. The two overriding issues for the ILC R&D programme are to demonstrate that the technical requirements for the accelerator are achievable with practical technologies, and that the ambitious physics goals can be addressed by realistic ILC detectors. This GDE interim report documents the impressive progress on the accelerator technologies that can make the ILC a reality. It highlights results of the technological demonstrations that are giving the community increased confidence that we will be ready to proceed with an ILC project following the TDR. The companion detector and physics report document likewise demonstrates how detector designs can meet the ambitious and detailed physics goals set out by the ILC Steering Committee. LHC results will likely affect the requirements for the machine design and the detectors, and we are monitoring that very closely, intending to adapt our design as those results become available.

43 PARTICLE ACCELERATORS↗

International Linear Collider-A Technical Progress Report

The International Linear Collider: A Technical Progress Report marks the halfway point towards the Global Design Effort fulfilling its mandate to follow up the ILC Reference Design Report with a more optimised Technical Design Report (TDR) by the end of 2012. The TDR will be based on much of the work reported here and will contain all the elements needed to propose the ILC to collaborating governments, including a technical design and implementation plan that are realistic and have been better optimised for performance, cost and risk. We are on track to develop detailed plans for the ILC, such that once results from the Large Hadron Collider (LHC) at CERN establish the main science goals and parameters of the next machine, we will be in good position to make a strong proposal for this new major global project in particle physics. The two overriding issues for the ILC R&D programme are to demonstrate that the technical requirements for the accelerator are achievable with practical technologies, and that the ambitious physics goals can be addressed by realistic ILC detectors. This GDE interim report documents the impressive progress on the accelerator technologies that can make the ILC a reality. It highlights results of the technological demonstrations that are giving the community increased confidence that we will be ready to proceed with an ILC project following the TDR. The companion detector and physics report document likewise demonstrates how detector designs can meet the ambitious and detailed physics goals set out by the ILC Steering Committee. LHC results will likely affect the requirements for the machine design and the detectors, and we are monitoring that very closely, intending to adapt our design as those results become available.

43 PARTICLE ACCELERATORS↗

FFAG Designs for Muon Collider Acceleration

I estimate FFAG parameters for a muon collider with a 70mm longitudinal emittance. I do not discuss the lower emittance beam for a Higgs factory. I produce some example designs, giving only parameters relevant to estimating cost and performance. The designs would not track well, but the parameters of a good design will be close to those described. I compare these cost estimates to those for a fast-ramping synchrotron and a recirculating linear accelerator. I conclude that FFAGs do not appear to be cost-effective for the large longitudinal emittance in a high-energy muon collider.

43 PARTICLE ACCELERATORS↗

Optics measurement and correction during beam acceleration in the Relativistic Heavy Ion Collider

To minimize operational complexities, setup of collisions in high energy circular colliders typically involves acceleration with near constant β-functions followed by application of strong focusing quadrupoles at the interaction points (IPs) for the final beta-squeeze. At the Relativistic Heavy Ion Collider (RHIC) beam acceleration and optics squeeze are performed simultaneously. In the past, beam optics correction at RHIC has taken place at injection and at final energy with some interpolation of corrections into the acceleration cycle. Recent measurements of the beam optics during acceleration and squeeze have evidenced significant beta-beats which if corrected could minimize undesirable emittance dilutions and maximize the spin polarization of polarized proton beams by avoidance of higher-order multipole fields sampled by particles within the bunch. In this report the methodology now operational at RHIC for beam optics corrections during acceleration with simultaneous beta-squeeze will be presented together with measurements which conclusively demonstrate the superior beam control. As a valuable by-product, the corrections have minimized the beta-beat at the profile monitors so reducing the dominant error in and providing more precise measurements of the evolution of the beam emittances during acceleration.

43 PARTICLE ACCELERATORS↗

Measurement of the Λ 0 b lifetime in Λ 0 b → Λ + c π - decays at the Collider Detector at Fermilab

The lifetime of the Λ 0 b baryon (consisting of u, d and b quarks) is the theoretically most interesting of all b-hadron lifetimes. The lifetime of Λ 0 b probes our understanding of how baryons with one heavy quark are put together and how they decay. Experimentally however, measurements of the Λ 0 b lifetime have either lacked precision or have been inconsistent with one another. This thesis describes the measurement of Λ 0 b lifetime in proton-antiproton collisions with center of mass energy of 1.96 TeV at Fermilab's Tevatron collider. Using 1070 ± 60pb -1 of data collected by the Collider Detector at Fermilab (CDF), a clean sample of about 3,000 fully-reconstructed Λ 0 b →Λ c + π - decays (with Λ + c subsequently decaying via Λ + c → p + K - π + ) is used to extract the lifetime of the Λ 0 b baryon, which is found to be cτ(Λ 0 b ) = 422.8 ± 13.8(stat) ± 8.8(syst)μm. This is the most precise measurement of its kind, and is even better than the current world average. It also settles the recent controversy regarding the apparent inconsistency between CDF's other measurement and the rest of the world.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for the Production of Gluinos and Squarks with the CDF II Experiment at the Tevatron Collider

This thesis reports on two searches for the production of squarks and gluinos, supersymmetric partners of the Standard Model (SM) quarks and gluons, using the CDF detector at the Tevatron √s = 1.96 TeV p$\bar{p}$ collider. An inclusive search for squarks and gluinos pair production is performed in events with large E T and multiple jets in the final state, based on 2 fb -1 of CDF Run II data. The analysis is performed within the framework of minimal supergravity (mSUGRA) and assumes R-parity conservation where sparticles are produced in pairs. The expected signal is characterized by the production of multiple jets of hadrons from the cascade decays of squarks and gluinos and large missing transverse energy E T from the lightest supersymmetric particles (LSP). The measurements are in good agreement with SM predictions for backgrounds. The results are translated into 95% confidence level (CL) upper limits on production cross sections and squark and gluino masses in a given mSUGRA scenario. An upper limit on the production cross section is placed in the range between 1 pb and 0.1 pb, depending on the gluino and squark masses considered. The result of the search is negative for gluino and squark masses up to 392 GeV/c 2 in the region where gluino and squark masses are close to each other, gluino masses up to 280 GeV/c 2 regardless of the squark mass, and gluino masses up to 423 GeV=c 2 for squark masses below 378 GeV/c 2 . These results are compatible with the latest limits on squark/gluino production obtained by the D0 Collaboration and considerably improve the previous exclusion limits from direct and indirect searches at LEP and the Tevatron. The inclusive search is then extended to a scenario where the pair production of sbottom squarks is dominant. The new search is performed in a generic MSSM scenario with R-parity conservation. A specific SUSY particle mass hierarchy is assumed such that the sbottom decays exclusively as $\tilde{b}$ 1 → b $\tilde{x}$ 1 0 . The expected signal for direct sbottom pair production is characterized by the presence of two jets of hadrons from the hadronization of the bottom quarks and E=T from the two LSPs in the final state. The events are selected with large E T and two energetic jets in the final state, and at least one jet is required to be associated with a b quark. The measurements are in good agreement with SM predictions for backgrounds. The results are translated into 95% CL exclusion limits on production cross sections and sbottom and neutralino masses in the given MSSM scenario. Cross sections down to 0.1 pb are excluded for the sbottom mass range considered. Sbottom masses up to 230 GeV/c 2 are excluded at 95% CL for neutralino masses below 70 GeV/c 2 . This analysis increases the previous CDF limit by more than 40 GeV/c 2 . The sensitivity of both the inclusive and the exclusive search is dominated by systematic effects and the results of the two analyses can be considered as conclusive for CDF Run II. With the new energy frontier of the newly commissioned Large Hadron Collider in Geneva, the experience from Tevatron will be of crucial importance in the developing of effective strategies to search for SUSY in the next era of particle physics experiments.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Challenging the Standard Model at the Tevatron Collider

Even at a time where the world's eyes are focused on the Large Hadron Collider at CERN, which has reached the energy frontier in 2010, many important results are still being obtained from data analyses performed at the Tevatron collider at Fermilab. This contribution discusses recent highlights in the areas of B hadron, electroweak, top quark, and Higgs boson physics.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Testing SUSY GUTs at the Dark Matter and Collider Experiments

We discuss low scale implications of a class of SUSY GUTs with non-universal SSB masses and confront them with the current experimental results from the direct detection of dark matter experiments, as well as the collider experiments of different center of mass energies. This class of SUSY GUTs are expected to be tested soon in direct detection dark matter experiments through the scatterings of Higgsino and Wino-like dark matters at nuclei. Besides, the stop and gluino will be able to be probed and tested up to about 5-6 TeV in the current and future collider experiments. Furthermore, these probe scales are expected to be further when high luminosities are achieved.

Collider↗

Siberian Snakes, Figure-8 and Spin Transparency Techniques for High Precision Experiments with Polarized Hadron Beams in Colliders

We present a review of the possibilities to conduct experiments of high efficiency in the nuclear and high energy physics with spin-polarized beams in a collider complex, configuration of which includes Siberian snakes or figure-8 collider ring. Special attention is given to the recently elicited advantageous possibility to conduct high precision experiments in a regime of the spin transparency (ST) when the design global spin tune is close to zero. In this regime, the polarization control is realized by use of spin navigators (SN), which are compact special insertions of magnets dedicated to a high flexibility spin manipulation including frequent spin flips.

43 PARTICLE ACCELERATORS↗

The Muon Collider

We describe the scientific motivation for a new type of accelerator, the muon collider. This accelerator would permit an energy-frontier scientific program and yet would fit on the site of an existing laboratory. Such a device is quite challenging, and requires a substantial R&D program. After describing the ingredients of the facility, the ongoing R&D activities of the Muon Accelerator Program are discussed. A possible U.S. scenario that could lead to a muon collider at Fermilab is briefly mentioned.

43 PARTICLE ACCELERATORS↗

R&D Toward a Neutrino Factory and Muon Collider

Significant progress has been made in recent years in R&D towards a neutrino factory and muon collider. The U.S. Muon Accelerator Program (MAP) has been formed recently to expedite the R&D efforts. This paper will review the U.S. MAP R&D programs for a neutrino factory and muon collider. Muon ionization cooling research is the key element of the program. The first muon ionization cooling demonstration experiment, MICE (Muon Ionization Cooling Experiment), is under construction now at RAL (Rutherford Appleton Laboratory) in the UK. The current status of MICE will be described.

43 PARTICLE ACCELERATORS↗

A Laser-Driven Linear Collider: Sample Machine Parameters and Configuration

We present a design concept for an e{sup +}e{sup -} linear collider based on laser-driven dielectric accelerator structures, and discuss technical issues that must be addressed to realize such a concept. With a pulse structure that is quasi-CW, dielectric laser accelerators potentially offer reduced beamstrahlung and pair production, reduced event pileup, and much cleaner environment for high energy physics and. For multi-TeV colliders, these advantages become significant.

36 MATERIALS SCIENCE↗

Bottom Production from Fixed-Target to Large Hadron Collider Energies

We present a state-of-the-art compilation of the existing bottom production cross sections in elementary collisions, from fixed-target to collider experiments. We then discuss the theoretical uncertainties on the total and differential bottom cross sections in the FONLL approach. In particular, we show total cross sections and kinematical distributions of the bottom hadrons and their decays: B {yields} e/{mu}X, B {yields} D {yields} e/{mu}, and B {yields} J/{psi}X. After seeing that the calculations give a good description of the existing measurements, we present detailed predictions for the LHC experiments in their specific phase space windows. Recent improvements in heavy quark production theory and experimental measurements at colliders, especially for bottom production, have shown that the perturbative QCD framework seems to work rather well, see Refs. [1, 2]. It is important to continue to validate this theoretical framework and its phenomenological inputs, extracted from other measurements, with new data such as that obtained by the CMS collaboration in pp collisions at {radical}s = 7 TeV. We validate the FONLL approach with lower energy data and also compare the results with preliminary LHC data. By showing good agreement between the calculations and the data, we demonstrate we can confidently extrapolate our results to energies appropriate for heavy-ion measurements. Total cross section calculations using the FONLL approach for pp {yields} B{bar B} show excellent agreement across a wide range of {radical}s at both full phase space and CDF phase space. This provides confidence that extrapolating to LHC energies will also show good agreement. Differential cross section FONLL calculations (d{sigma}/dp{sub T} and d{sigma}/d{eta}) at 7 TeV have been compared to preliminary CMS results. The agreement is quite striking. In addition, B fraction calculations have been made that also compare well to the CMS data. This should allow us to expect good agreement between further FONLL calculations and other observables.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

High luminosity electron-hadron collider eRHIC

We present the design of a future high-energy high-luminosity electron-hadron collider at RHIC called eRHIC. We plan on adding 20 (potentially 30) GeV energy recovery linacs to accelerate and to collide polarized and unpolarized electrons with hadrons in RHIC. The center-of-mass energy of eRHIC will range from 30 to 200 GeV. The luminosity exceeding 10{sup 34} cm{sup -2} s{sup -1} can be achieved in eRHIC using the low-beta interaction region with a 10 mrad crab crossing. We report on the progress of important eRHIC R&D such as the high-current polarized electron source, the coherent electron cooling, ERL test facility and the compact magnets for recirculation passes. A natural staging scenario of step-by-step increases of the electron beam energy by building-up of eRHIC's SRF linacs is presented.

43 PARTICLE ACCELERATORS↗

Light Squarks and Gluinos at TeV-scale $e^+e^-$ Colliders

In the general MSSM, first and second generation squarks and gluinos may be sufficiently light to be produced and studied at e{sup +}e{sup -} colliders operating in the 0.5-1 TeV energy range. After a reminder that the MSSM is not the same as mSUGRA, we provide a brief overview of these possibilities within this more general framework. Squarks and gluinos may be light enough to be produced at an e{sup +}e{sup -} collider operating in the 0.5-1 TeV energy range in non-mSUGRA SUSY breaking scenarios. The decays of such particles, though always leading to jets, may or may not produce ME depending on the nature of the SUSY spectrum. The electroweak properties of the squarks can be determined using polarized beams and production cross section measurements. The simultaneous production of essentially degenerate 1st and 2nd generation squarks can be problematic although efficient charm tagging would be helpful. If (some) squarks are heavier than gluinos then gluinos may be best studied as squark decay products. If gluinos are heavier than squarks, associated production can lead to an unambiguous, although small, production cross section somewhat below {approx} 1 fb. Gluino pair production is perhaps more interesting as the cross section for this process involves the entire strongly interacting sector of the MSSM. The rate is expected to be rather small for this process in the case of mSUGRA but has not been well-studied in the more general MSSM.

43 PARTICLE ACCELERATORS↗

Detectors for Linear Colliders: Physics Requirements and Experimental Conditions (1/4)

How is the anticipated physics program of a future e+e- collider shaping the R&D; for new detectors in collider particle physics ? This presentation will review the main physics requirements and experimental conditions comparing to LHC and LEP. In particular, I shall discuss how e+e- experimentation is expected to change moving from LEP-2 up to multi-TeV energies.

43 PARTICLE ACCELERATORS↗

Higgs Boson Searches at Hadron Colliders (1/4)

In these Academic Training lectures, the phenomenology of Higgs bosons and search strategies at hadron colliders are discussed. After a brief introduction on Higgs bosons in the Standard Model and a discussion of present direct and indirect constraints on its mass the status of the theoretical cross section calculations for Higgs boson production at hadron colliders is reviewed. In the following lectures important experimental issues relevant for Higgs boson searches (trigger, measurements of leptons, jets and missing transverse energy) are presented. This is followed by a detailed discussion of the discovery potential for the Standard Model Higgs boson for both the Tevatron and the LHC experiments. In addition, various scenarios beyond the Standard Model, primarily the MSSM, are considered. Finally, the potential and strategies to measured Higgs boson parameters and the investigation of alternative symmetry breaking scenarios are addressed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗