Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BURN”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Investigation of the burning configuration of a coaxial injector in a combustion chamber

An analytical investigation was made into the stability of the burning configuration of a single coaxial injector surrounded by similar injectors. The stability criteria was based on an average pressure difference along the boundaries of the adjacent stream tubes as calculated using Spaulding's numerical method. The results indicate qualitatively that there is a tendency for the injectors to have different burning configurations. It is believed that the configuration achieved is random, however once the burning configuration is established, it is believed to persist.

Ohara, J.↗

Observations on the burning of droplets in the absence of buoyancy

?The first stages of an experimental study on droplet burning at zero gravity are described. Motivations for the work are to investigate transient burning and effects of finite-rate chemistry, in a geometrical configuration sufficiently simple for theoretical analyses to be performed in detail and checked against experiment. Two possible approaches to the experimental problem are to establish burning in a freely falling chamber in a drop tower and to perform the experiments in a research facility in space, such as spacelab. The work reported here concerns the drop-tower experiments. The design of these experiments is discussed, and preliminary results of the experimental program are given. Critical problems in drop-tower testing of this kind, especially timing problems that arise in this particular experiment, are emphasized.

Knight, B.↗

Isotopic anomalies from neutron reactions during explosive carbon burning

The possibility that the newly discovered correlated isotopic anomalies for heavy elements in the Allende meteorite were synthesized in the secondary neutron capture episode during the explosive carbon burning, the possible source of the O-16 and Al-26 anomalies, is examined. Explosive carbon burning calculations under typical conditions were first performed to generate time profiles of temperature, density, and free particle concentrations. These quantities were inputted into a general neutron capture code which calculates the resulting isotopic pattern from exposing the preexisting heavy seed nuclei to these free particles during the explosive carbon burning conditions. The interpretation avoids the problem of the Sr isotopic data and may resolve the conflict between the time scales inferred from 1-129, Pu-244, and Al-26.

Lee, T.↗

Droplet burning at zero G

Questions of the importance and feasibility of performing experiments on droplet burning at zero gravity in Spacelab were studied. Information on the physics and chemistry of droplet combustion, with attention directed specifically to the chemical kinetics, heat and mass transfer, and fluid mechanics of the phenomena involved, are presented. The work was divided into three phases, the justification, the feasibility, and the conceptual development of a preliminary design. Results from the experiments performed revealed a few new facts concerning droplet burning, notably burning rates in excess of theoretical prediction and a phenomenon of flash extinction, both likely traceable to accumulation of carbon produced by gas-phase pyrolysis in the fuel-rich zone enclosed by the reaction surface. These experiments also showed that they were primarily due to timing difficulties.

Williams, F. A.↗

Diagnosis of cutaneous thermal burn injuries by multispectral imaging analysis

Special photographic or television image analysis is shown to be a potentially useful technique to assist the physician in the early diagnosis of thermal burn injury. A background on the medical and physiological problems of burns is presented. The proposed methodology for burns diagnosis from both the theoretical and clinical points of view is discussed. The television/computer system constructed to accomplish this analysis is described, and the clinical results are discussed.

Anselmo, V. J.↗

Theoretical studies of massive stars. II - Evolution of a 15 solar-mass star from carbon shell burning to iron core collapse

The evolution of a Population I star of 15 solar masses is described from the carbon shell burning stage to the formation and collapse of an iron core. An unusual aspect of the evolution is that neon ignition occurs off-center and neon burning propagates inward by a series of shell flashes. The extent of the core burning is generally smaller than the Chandrasekhar mass, so that most of the nuclear energy generation occurs in shell sources. Because of degeneracy and the influence of rapid convective mixing, these shell sources are unstable and the core goes through large excursions in temperature and density. The small core also causes the shell sources to converge into a narrow mass region slightly above the Chandrasekhar mass. Thus, the final nucleosynthesis yields are generally small, with silicon being most strongly enhanced with respect to solar system abundances.

Sparks, W. M.↗

Observations on the Burning of Droplets in the Absence of Buoyancy

Experimental results are reported on the burning of free droplets of heptane and decane in oxygen-nitrogen atmospheres. The burning occurred in a freely falling chamber providing 2.2 sec of negligible gravity. Enhanced burning rates and a phenomenon of flash extinction were observed and attributed to thermophoretic buildup and ignition of carbon near the droplet surface.

Knight, B.↗

Burning rate for steel-cased, pressed binderless HMX

The burning behavior of pressed binderless HMX laterally confined in 6.4 mm i.d. steel cases was measured over the pressure range 1.45 to 338 MPa in a constant pressure strand burner. The measured regression rates are compared to those reported previously for unconfined samples. It is shown that lateral confinement results in a several-fold decrease in the regression rate for the coarse particle size HMX above the transition to super fast regression. For class E samples, confinement shifts the transition to super fast regression from low pressure to high pressure. These results are interpreted in terms of the previously proposed progressive deconsolidation mechanism. Preliminary holographic photography and closed bomb tests are also described. Theoretical one dimensional modeling calculations were carried out to predict the expected flame height (particle burn out distance) as a function of particle size and pressure for binderless HMX burning by a progressive deconsolidation mechanism.

Fifer, R. A.↗

Burning-to-violent-reaction transitions in explosions

In a program to study fragment initiation of cased propellants and explosives, it was found that one area of extreme importance is that of the cased reactive-material burning reactions triggered by the perforation of the case by an impacting fragment. Once the reaction is started, the importance of the impactor decreases, and the sequence of events is controlled by the burning properties of the reactive material, its physical condition, and the nature of the confinement. A brief history of the results obtained by previous investigators is presented along with a discussion of variations in experimental results caused by geometrical changes in the test configurations. Changes in interpretations of the results are discussed. Results of recent confined-burn tests with Composition B, PBXC-116, PBXC-117, and Destex are presented, including results of metallurgical examination of the confined fragments. These examinations indicate a transition to a violent reaction which is not a detonation, although it produces many effects that resemble a detonation.

Graham, K. J.↗

Selection of burn-resistant materials for oxygen-driven turbopumps

NASA goals for reusable space-based, high-performance orbit transfer vehicle propulsion systems have resulted in a need for oxygen/hydrogen engines which include lightweight, highly reliable, liquid oxygen pumps. The selection of ignition- and burn-resistant materials is a major factor in the design of a compact 75,000-rpm turbopump which can deliver 6 lbM/sec of liquid oxygen at 5,000 psia. The potential operational hazards of rubbing friction and impact of foreign particles at high velocity were investigated experimentally for a wide range of candidate materials, i.e., nickel, copper, monel, 316 Stainless Steel, Hastelloy-X, Invar-36, and silicon carbide. Test parameters included oxygen pressure and temperature up to 5,000 psia and 800 F, respectively. The effect of increasing the O2 pressure from 1000 to 5000 psi is discussed. The applicability of the candidate materials to oxygen pump design was ranked by comparing the experimental results among themselves and with an analytically determined parameter, i.e., the burn factor. Nickel and copper demonstrated superior resistance to ignition and burn in the friction rubbing and particle impact tests relative to monel, stainless steel, and nickel-iron base superalloys.

Schoenman, L.↗

Optimal low-thrust, three-burn orbit transfers with large plane changes

Optimal low-thrust, three-burn solutions have been obtained for orbit transfers between a 28.5-degree inclined low earth orbit and a series of 63.4-degree inclined circular orbits as well as a series of 63.4-degree inclined elliptical orbits with twelve hour periods. Solutions have also been obtained for orbit transfers between 97-degree inclined orbits and a 57-degree inclined low earth orbit. Thrust to weight ratios as low as 0.02 were considered. A hybrid nonlinear programming method was used to obtain the solutions. Analysis of the optimal steering during various burns reveals a natural division of the steering strategies into two categories based on whether a burn results in a change predominantly in semi-major axis or orbit plane. The similarity of these optimal steering strategies to previously obtained simple near-optimal steering strategies is discussed.

Zondervan, K. P.↗

Two-stage earth-to-orbit vehicles with series and parallel burn

Recent studies have indicated that a fully reusable earth-to-orbit vehicle system will be needed near the beginning of the next century. One likely concept is a two-stage, vertical takeoff system with liquid rocket propulsion. Such vehicles have been examined with series burn and parallel burn of the engines of each stage. The results indicate that the preferred concept will have parallel burn with crossfeed, the booster will have hydrocarbon engines, the Orbiter will have both hydrocarbon and hydrogen engines, and the staging velocity will be low enough to allow the booster to glide back to the launch site.

Martin, J. A.↗

The scaling of the threshold conditions for solid propellant erosive burning

The effects of the parameters that are considered to influence most strongly the scaling to larger rocket motor sizes of the transition or threshold conditions for erosive burning rate augmentation are measured and a scaling criterion for the threshold conditions for erosive burning is developed. The results are presented for a series of motor firings that were performed to measure the transition length threshold conditions (axial position at which deviation from nonerosive burning rate begins) while attempting to systematically vary the parameters that are considered to control the phenomena. The results of attempts to correlate the threshold conditions with several flow parameters are presented.

Strand, L. D.↗

Radiative surface temperatures of the burned and unburned areas in a tallgrass prairie

This study was conducted in a natural tallgrass prairie area in the Flint Hills of Kansas. The objective was to evaluate the surface radiative temperatures of burned and unburned treatments of the grassland as a means of delineating the areas covered by each treatment. Burning is used to remove the senescent vegetation resulting from the previous year's growth. Surface temperatures were obtained in situ and by an airborne scanner. Burned and unburned grass canopies had distinctly different diurnal surface radiative temperatures. Measurements of surface energy balance components revealed a difference in partitioning of the available energy between the two canopies, which resulted in the difference in their measured surface temperatures. The magnitude of this difference is dependent on the time of measurements and topographic conditions.

Asrar, G.↗

The scaling of the threshold conditions for solid propellant erosive burning

Rocket test firings were performed to measure the transition length threshold conditions while systematically varying various rocket motor parameters. These include the crossflow velocity, the chamber pressure, the propellant nonerosive burning rate, the propellant surface roughness, and the motor port diameter. The erosive burning trends with varying propellant burning rate, motor chamber pressure, and mass flow rate are consistent with published results.

Strand, L. D.↗

The hydrogen shell game - Pulsational instabilities in hydrogen shell-burning planetary nebula nuclei

Fully nonadiabatic g-mode pulsation calculations have been obtained for evolutionary models of planetary nebula nuclei (PNN) with active hydrogen-burning shells. Expressions have been developed for the phase delays which can develop between the temperature variations and the abundance variations of agents in the CN cycle. G-mode instabilities are noted that are driven by the epsilon mechanism at the position of the nuclear burning shells in standard PNN models. The results indicate that the central stars do not retain sufficient hydrogen to support nuclear burning following ejection of the planetary nebula.

Kawaler, Steven D.↗

Erosive burning threshold conditions in solid rocket motors

Erosive burning has been predicted to be enhanced by factors that increase the level of turbulence close to the propellant surface, such a high cross flow velocity, low surface blowing rate, propellant surface roughness, and adverse pressure gradient. A study is reported which was carried out with the objective of measuring the effects of these parameters on the scaling to larger rocket motor sizes of the transition to, or threshold conditions for, erosive burning rate augmentation. The results are used to develop a scaling criterion for the threshold conditions for erosive burning.

Strand, L. D.↗

An ultrasonic technique to measure the depth of burn wounds in humans

Whenever ultrasound encounters discontinuity in its medium of propagation, some energy is reflected from the interface. Such reflections or echoes occur when incident energy encounters the front skin, viable/necrotic, and dermis/fat skin tissue interfaces. It was shown that the most probable cause of the viable/necrotic interface is the uncoiling of collagen in the necrotic tissue, which can cause a reflection at the viable/necrotic interface of approximately 10 percent of the wave amplitude, and is approximately the same as that from the other two interfaces noted. The instrument, still in the prototype stage, was designed to detect the various reflections from within the skin layer. It is shown that, by studying the timing between the various echoes, one can use ultrasound as an aid in diagnosing the depth of burned skin tissue in humans. The instrument is a 60-MHz A-scan unit, modified to more easily identify the echoes occurring within the short time interval during which the reflections are received from the skin layers. A high frequency unit was selected so that various transducers could be utilized to optimize the system. Signal conditioning circuits were modified and added to provide an adequate display of the principle reflections expected. The unit was successful in studying burned tissue in pigs and was recently used to study burn wounds in humans. Measurement techniques and preliminary results are presented.

Yost, William T.↗