Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Apertures”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

System architecture of MMIC-based large aperture arrays for space applications

The persistent trend to use millimeter-wave frequencies for satellite communications presents the challenge to design large-aperture phased arrays for space applications. These arrays, which comprise 100 to 10,000 elements, are now possible due to the advent of lightwave technology and the availability of monolithic microwave integrated circuits. In this paper, system aspects of optically controlled array design are studied. In particular, two architectures for a 40 GHz array are outlined, and the main system-related issues are examined: power budget, synchronization in frequency and phase, and stochastic effects.

Herczfeld, P. R.↗
NASA NTRS1988

Preliminary results from the NASA/JPL multifrequency, multipolarization synthetic aperture radar

A brief description is given of the three-frequency polarimetric synthetic-aperture radar built and tested at the Jet Propulsion Laboratory. The radar has the capability to simultaneously acquire fully polarimetric data at P-, L-, and C-bands from a DC-8 airborne platform. The radar has an instantaneous data rate of approximately 2.1 Gb/s and has selectable record rates between 80-240 Mb/s. The system has a wide dynamic range featuring 8-b analog-to-digital converters and full digital floating-point processing. The processing is accomplished offline on a minicomputer system assisted by an array processor. Sample images are presented.

Held, Daniel N.↗
NASA NTRS1988

Intercomparison of synthetic- and real-aperture radar observations of Arctic sea ice during winter MIZEX '87

Active microwave measurements were made of various sea ice forms in March and April 1987 during the Marginal Ice Zone Experiment, at 1, 5, 10, 18, and 35 GHz using a synthetic aperture radar (SAR) and helicopter and ship-based scatterometers. The X-band (9.8 GHz) SAR data were compared to the scatterometer data and it was determined that for 5 GHz and higher frequencies both the SAR and scatterometers can differentiate open water, new ice (5 to 30 cm), first-year ice with rubble (0.60 -1.5 m), and multiyear ice. The analysis further confirmed that the C-band (5 GHz) SAR's flying on ESA ERS-1 and Radarsat will differentiate the mentioned ice types.

Schuchmann, R. A.↗
NASA NTRS1988

Ice sheet studies using synthetic aperture radar

The objective was to demonstrate the utility of synthetic aperture radar in ice sheet studies. The major advantage of SAR imagery over visible imagery is the all-weather capability of radar and the ability to specify look angle. Available digital SAR imagery over ice sheets was collected and examined both qualitatively and quantitatively using corroborative data, such as LANDSAT imagery, to confirm feature identification and interpretations. A simple scattering model will be developed to assess the relative importance of surface topography, composition, and subsurface layering to the intensity of radar backscatter. Recommendations of system parameters will be made for optimal SAR operation over ice sheets.

Bindschadler, R.↗
NASA NTRS1988

A digital calibration method for synthetic aperture radar systems

A basic method to calibrate imagery from synthetic aperture radar (SAR) systems is presented. SAR images are calibrated by monitoring all the terms of the radar equation. This procedure includes the use of both external (calibrated reference reflectors) and internal (system-generated calibration signals) sources to monitor the total SAR system transfer function. To illustrate the implementation of the procedure, two calibrated SAR images (X-band, 3.2-cm wavelength) are presented, along with the radar cross-section measurements of specific scenes within each image. The sources of error within the SAR image calibration procedure are identified.

Larson, Richard W.↗
NASA NTRS1988

Realizable feed-element patterns and optimum aperture efficiency in multibeam antenna systems

The results of an earlier paper by Rahmat-Samii et al. (1981), regarding realizable patterns from feed elements that are part of an array that feeds a reflector antenna, are extended. The earlier paper used a cos exp q theta model for the element radiation pattern, whereas here a parametric study is performed, using a model that assumes a central beam of cos exp q theta shape, with a constant sidelobe level outside the central beam. Realizable q-values are constrained by the maximum directivity based on feed element area. The optimum aperture efficiency (excluding array feed network losses) in an array-reflector system is evaluated as a function of element spacing using this model as well as the model of the earlier paper. Experimental data for tapered slot antenna (TSA) arrays are in agreement with the conclusions based on the model.

Yngvesson, K. S.↗
NASA NTRS1988

Ocean wave directional spectra and wave-current interaction in the Agulhas from the Shuttle Imaging Radar-B synthetic aperture radar

SIR-B synthetic aperture radar ocean-wave spectra for a 200-km pass crossing the Agulhas current off the coast of Africa are analyzed. A significant enhancement of one spectral peak along the northern edge of the current is attributed both to amplification of the waves by refraction-dominated wave-current interaction and to transient specular backscatter contributions spatially correlated to the waves.

Irvine, D. E.↗
NASA NTRS1989

A sub-millimetre aperture synthesis array for nonsolar planet detection

The possibility of using aperture synthesis to image other planetary systems at submillimeter wavelengths is considered. The approach requires only a small increase in dynamic range over that already demonstrated by the VLA at longer wavelengths. The values of the relevant parameters are calculated and presented.

Jones, Dayton L.↗
NASA NTRS1989

Gamma-ray observations of Cygnus X-1 and Cygnus X-3 using a coded-aperture telescope

A balloon-borne coded-aperture telescope, measuring gamma-ray photons in the 160 keV to 9.3 MeV range, was used to observe the Cygnus region of the sky on October 1 and 2, 1984. In the 2-9.3-MeV band, evidence is found for a hard spectral component with a mean flux level at the top of the atmosphere of 7.4 + or - 2.5 x 10 to the -7th photons/sq cm per s per keV, inconsistent with the predictions of the inverse Compton models normally used to describe the X-ray emission. Both Cyg X-1 and Cyg X-3 could be observed simultaneously with the telescope. The results are used to establish 1-sigma upper flux limits on the spectral emission from Cyg X-3.

Mcconnell, M. L.↗
NASA NTRS1990

Synthetic aperture radar imagery of airports and surrounding areas: Philadelphia Airport

The statistical description of ground clutter at an airport and in the surrounding area is addressed. These data are being utilized in a program to detect microbursts. Synthetic Aperture Radar (SAR) data were collected at the Philadelphia Airport. These data and the results of the clutter study are described. This 13 km x 10 km scene was imaged at 9.38 GHz and HH-polarization and contained airport grounds and facilities (6 percent), industrial (14 percent), residential (14 percent), fields (10 percent), forest (8 percent), and water (33 percent). Incidence angles ranged from 40 to 84 deg. Even at the smallest incidence angles, the distributed targets such as forest, fields, water, and residential rarely had mean scattering coefficients greater than -10 dB. Eighty-seven percent of the image had scattering coefficients less than -17.5 dB. About 1 percent of the scattering coefficients exceeded 0 dB, with about 0.1 percent above 10 dB. Sources which produced the largest cross sections were largely confined to the airport grounds and areas highly industrialized. The largest cross sections were produced by observing broadside large buildings surrounded by smooth surfaces.

Onstott, Robert G.↗
NASA NTRS1990

Aperture taper determination for the half-scale accurate antenna reflector

A simulation is described of a proposed microwave reflectance measurement in which the half scale reflector is used in a compact range type of application. The simulation is used to determine an acceptable aperture taper for the reflector which will allow for accurate measurements. Information on the taper is used in the design of a feed for the reflector.

Lambert, Kevin M.↗
NASA NTRS1990

Development of the CLAES instrument aperture door system

The design, assembly, and test processes followed in developing a space-qualified aperture door system are described. A blackbody calibration source is mounted inside the door, requiring the assembly to open and close a minimum of 150 cycles for instrument recalibration. Within the door system are four separate mechanisms, three of which are redundant; a pyro launch latch, a hinge bearing assembly, and a pair of pivot mechanisms. Decoupling devices within the pivot mechanisms allow an active drive unit to automatically overdrive a failed drive unit. The door is also stowable for possible Shuttle retrieval and re-entry. Illustrations and photographs of the flight hardware help acquaint the reader with the design. The aim is to pass on lessons learned in all phases of developing this spaceflight mechanism.

Stubbs, D. M.↗
NASA NTRS1990

Synthetic Aperture Radar Imagery of Airports and Surrounding Areas: Denver Stapleton International Airport

This is the third in a series of three reports which address the statistical description of ground clutter at an airport and in the surrounding area. These data are being utilized in a program to detect microbursts. Synthetic aperture radar (SAR) data were collected at the Denver Stapleton Airport using a set of parameters which closely match those which are anticipated to be utilized by an aircraft on approach to an airport. These data and the results of the clutter study are described. Scenes of 13 x 10 km were imaged at 9.38 GHz and HH-, VV-, and HV-polarizations, and contain airport grounds and facilities (up to 14 percent), cultural areas (more than 50 percent), and rural areas (up to 6 percent). Incidence angles range from 40 to 84 deg. At the largest depression angles the distributed targets, such as forest, fields, water, and residential, rarely had mean scattering coefficients greater than -10 dB. From 30 to 80 percent of an image had scattering coefficients less than -20 dB. About 1 to 10 percent of the scattering coefficients exceeded 0 dB, and from 0 to 1 percent above 10 dB. In examining the average backscatter coefficients at large angles, the clutter types cluster according to the following groups: (1) terminals (-3 dB), (2) city and industrial (-7 dB), (3) warehouse (-10 dB), (4) urban and residential (-14 dB), and (5) grass (-24 dB).

Onstott, Robert G.↗
NASA NTRS1989

A signal processing view of strip-mapping synthetic aperture radar

The authors derive the fundamental strip-mapping SAR (synthetic aperture radar) imaging equations from first principles. They show that the resolution mechanism relies on the geometry of the imaging situation rather than on the Doppler effect. Both the airborne and spaceborne cases are considered. Range processing is discussed by presenting an analysis of pulse compression and formulating a mathematical model of the radar return signal. This formulation is used to obtain the airborne SAR model. The authors study the resolution mechanism and derive the signal processing relations needed to produce a high-resolution image. They introduce spotlight-mode SAR and briefly indicate how polar-format spotlight processing can be used in strip-mapping SAR. They discuss a number of current and future research directions in SAR imaging.

Munson, David C., Jr.↗
NASA NTRS1990

Global digital topography mapping with a synthetic aperture scanning radar altimeter

Global digital topography data of the land surface is of importance in a variety of geoscientific and application disciplines. Such a database, with a spatial resolution of 150 to 500 m and height accuracy of 5 m or better can be acquired from an orbiting platform using a synthetic aperture scanning radar altimeter. Near-global coverage can be achieved within 14 days from an orbiting platform in a polar or near-polar orbit.

Elachi, C.↗
NASA NTRS1990

Comparison of CNES spherical and NASA hemispherical large aperture integrating sources. I - Using a laboratory transfer spectroradiometer. II - Using the SPOT-2 satellite instruments

CNES spherical and NASA hemispherical large aperture calibration sources are examined using a laboratory transfer spectroradiometer and SPOT-2 instruments. The sources, collected at Matra in France during October 1987, are compared in terms of absolute calibration, linearity, and uniformity. The laboratory transfer spectroradiometer data reveal that the calibration results correspond to within about 7 percent absolute accuracy level and the linearity of the CNES source with lamp level is good. It is observed using the satellite data that both sources have an excellent uniformity over a 4 deg field of view.

Guenther, B.↗