Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Al2O3”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Improved ceramic heat exchanger materials

The development and evaluation of materials for potential application as heat exchanger structures in automotive gas turbine engines is discussed. Test specimens in the form of small monolithic bars were evaluated for thermal expansion and dimensional stability before and after exposure to sea salt and sulfuric acid, followed by short and long term cycling at temperatures up to 1200 C. The material finally selected, GE-7808, consists of the oxides, ZrO2-MgO-Al2O3-S1O2, and is described generically as ZrMAS. The original version was based on a commercially available cordierite (MAS) frit. However, a clay/talc mixture was demonstrated to be a satisfactory very low cost source of the cordierite (MAS) phase. Several full size honeycomb regenerator cores, about 10.2 cm thick and 55 cm diameter were fabricated from both the frit and mineral versions of GE-7808. The honeycomb cells in these cores had rectangular dimensions of about 0.5 mm x 2.5 mm and a wall thickness of approximately 0.2 mm. The test data show that GE-7808 is significantly more stable at 1100 C in the presence of sodium than the aluminosilicate reference materials. In addition, thermal exposure up to 1100 C, with and without sodium present, results in essentially no change in thermal expansion of GE-7808.

Rauch, H. W.↗
NASA NTRS1980

Development of simplified process for environmentally resistant cells

This report describes a program to develop a simple, foolproof, all vacuum solar cell manufacturing process which can be completely automated and which results in medium efficiency cells which are inherently environmentally resistant. All components of the completed cells are integrated into a monolithic structure with no material interfaces. The exposed materials (SI, Al2O3, Al, Ni) are all resistant to atmospheric attack and the junction, per se, is passivated to prevent long term degradation. Such cells are intended to be incorporated into a simple module consisting basically of a press formed metallic superstructure with a separated glass cover for missile, etc., protection.

King, W. J.↗
NASA NTRS1981

Sandblasting nozzle

A nozzle for use with abrasive and/or corrosive materials is formed of sintered ceramic compositions having high temperature oxidation resistance, high hardness and high abrasion and corrosion resistance. The ceramic may be a binary solid solution of a ceramic oxide and silicon nitride, and preferably a ternary solid solution of a ceramic oxide, silicon nitride and aluminum nitride. The ceramic oxide is selected from a group consisting of Al2O3, Y2O3 and Cr2O3, or mixtures of those compounds. Titanium carbide particles are dispersed in the ceramic mixture before sintering. The nozzles are encased for protection from external forces while in use by a metal or plastic casing.

Perkins, G. S.↗
NASA NTRS1981

Study of the effects of gaseous environmental on the hot corrosion of superalloy materials

Studies have been conducted to examine the effect of low concentrations of NaCl(g) on the high temperature oxidation behavior of complex superalloys and potential coating formulations modified by silicon and reactive element (i.e., yttrium and hafnium) additions. Depending on alloy composition, a variety of effects were thermogravimetrically produced. Aluminum free alloys such as MAR-M509 and Hastelloy X with molybdenum and tungsten in solid solution showed accelerated (or breakaway) kinetics similar to that observed for Ni-Cr alloys. For IN-792, an alloy high in chromium and low in aluminum, molybdenum and tungsten present in solid solution does not adversely affect oxidation kinetics in the presence of NaCl(g). On the other hand, nickel-base alloys high in aluminum and molybdenum are catastrophically attacked by NaCl-bearing atmospheres. Silicon additions were, in general, observed to slightly improve the oxidation resistance of Ni, Ni-40Cr and CoCrAlY compositions in NaCl(g)-bearing atmospheres. To the degree that processes responsible for Al2O3 whisker formation deleteriously affect protective scale adherence, the addition of yttrium or hafnium can inhibit such whisker growth.

Smeggil, J. G.↗
NASA NTRS1981

Effect of Yttria additives on properties of pressureless-sintered silicon nitride

Si3N4-base ceramics were made from milled Si3N4 containing 11.1 wt% SiO2 and oxide additives by pressureless sintering at 1760 C. The four-point-average moduli of rupture were 460, 515, and 515 MPa at room temperature and 270, 256, and 227 MPa at 1400 C for compositions with 3.67, 7.22, and 14.0 wt% Y2O3, respectively. The oxidation resistance of these compositions decreased with increasing Y2O3 in the 600 to 1400 C range, and no surface oxide cracking or spalling was noted. Partial substitution of Al2O3 for Y2O3 reduced both strength and oxidation resistance.

Arias, A.↗
NASA NTRS1981

Chondrules in H3 chondrites - Textures, compositions and origins

Compositional and textural variations among chondrules in unequilibrated (type 3) H-group chondrites are examined in order to determine possible relations between chondrule compositions and textures. Bulk compositions of polished thin sections of 90 individual chondrules and 16 compound chondrule sets from the Sharps, Tieschitz and Bremervorde chondrites were measured by broad-beam electron probe analyses; the chondrules were also classified petrographically as barred olivine, porphyritic olivine, porphyritic pyroxene, barred pyroxene, radiating pyroxene or fine-grained. The mean compositions of each type are found to be distinct as verified by discriminant analysis, despite a large scatter, with the olivine-rich chondrules characterized by low SiO2 and high FeO and MgO contents, greater concentrations of TiO2, Al2O3, Na2O and K2O, and lower Cr2O3 and MnO relative to pyroxene-rich chondrules. Data suggest that composition, together with cooling rate, has played a conspicuous role in producing observed chrondrule textures, and are consistent with chondrule formation from mixtures of differing fractions of high-, intermediate- and low-temperature nebular condensates that underwent melting in space.

Lux, G.↗
NASA NTRS1981

Degradation Mechanisms in Aluminum Matrix Composites: Alumina/Aluminum and Boron/Aluminum

The effects of fabrication and long term thermal exposure (up to 10,000 hours at 590 K) on two types of aluminum matrix composites were examined. An alumina/aluminum composite, was made of continuous alpha Al2O3 fibers in a matrix of commercially pure aluminum alloyed with 2.8% lithium. The mechanical properties of the material, the effect of isothermal exposure, cyclic thermal exposure, and fatigue are presented. Two degradation mechanisms are identified. One was caused by formation of a nonstoichiometric alumina during fabrication, the other by a loss of lithium to a surface reaction during long term thermal exposure. The other composite, boron/aluminum, made of boron fibers in an aluminum matrix, was investigated using five different aluminum alloys for the matrices. The mechanical properties of each material and the effect of isothermal and cyclic thermal exposure are presented. The effects of each alloy constituent on the degradation mechanisms are discussed. The effects of several reactions between alloy constituents and boron fibers on the composite properties are discussed.

Olsen, G. C.↗
NASA NTRS1981

Reeds computer code

The REEDS (rocket exhaust effluent diffusion single layer) computer code is used for the estimation of certain rocket exhaust effluent concentrations and dosages and their distributions near the Earth's surface following a rocket launch event. Output from REEDS is used in producing near real time air quality and environmental assessments of the effects of certain potentially harmful effluents, namely HCl, Al2O3, CO, and NO.

Bjork, C.↗
NASA NTRS1982

A preliminary study of the particulate fallout from the space shuttle (STS-1)

Prediction of acid fallout and the dry deposition of Al2O2 was the objective of this investigation. Sampling was done at the Kennedy Space Center in Florida. The models available were not appropriate and the data available was negligible. Thus, a bimodal particle distribution was assumed normalized to the few existing data points and used as a foundation for a crude zeroth order approximation for the acid fallout. In addition, a settling spectrum for the Al2O3 particles was devised as a table look-up since the graphs in the literature at first pass could not be fitted with reasonable analytic functions. Consulting services were rendered to researchers. Special emphasis was placed on improving current techniques and adding LIDAR (Light Radar). Suggestions for future studies are made.

Hudson, G. M.↗
NASA NTRS1982

Thermal degradation of the tensile properties of undirectionally reinforced FP-AI203/EZ 33 magnesium composites

The effects of isothermal and cyclic exposure on the room temperature axial and transverse tensile strength and dynamic flexural modulus of 35 volume percent and 55 volume percent FP-Al2O3/EZ 33 magnesium composites were studied. The composite specimens were continuously heated in a sand bath maintained at 350 C for up to 150 hours or thermally cycled between 50 and 250 C or 50 and 350 C for up to 3000 cycles. Each thermal cycle lasted for a total of six minutes with a hold time of two minutes at the maximum temperature. Results indicate to significant loss in the room temperature axial tensile strength and dynamic flexural modulus of composites thermally cycled between 50 and 250 C or of composites isothermally heated at 350 C for up to 150 hours from the strength and modulus data for the untreated, as fabricated composites. In contrast, thermal cycling between 50 and 350 C caused considerable loss in both room temperature strength and modulus. Fractographic analysis and measurement of composite transverse strength and matrix hardness of thermally cycled and isothermally heated composites indicated matrix softening and fiber/matrix debonding due to void growth at the interface and matrix cracking as the likely causes of the strength and modulus loss behavior.

Bhatt, R. T.↗
NASA NTRS1982

Fundamental studies of the solid-particle erosion of silicon

The predictions of the theories of solid-particle erosion of brittle materials are compared to experimental results of studies in which angular Al2O3 particles with mean diameters D of 23 to 270 microns are used to erode (111) surfaces of silicon single crystals at impact angles alpha from 20 to 90 deg and velocities v from 30 to 150 m/s. The description of the steady state erosion rate by a power law, delta W varies directly as (v sin alpha)(n)D(m) must be modified to include threshold and plasticity effects. Furthermore the velocity exponent n depends on D. Results using abrasives of different sizes mixed together can be explained using a logarithmic-normal distribution. The results of transient experiments can be used to explain the synergistic effects which are observed using a biomodal distribution of abrasives.

Routbort, J. L.↗
NASA NTRS1974

High modulus invert analog glass compositions containing beryllia

Glass compositions having a Young's modulus of at least 15 million psi and a specific modulus of at least 110 million inches consisting essentially of, in mols, 10-45% SiO2, 2-15% Li2O, 3-34% BeO, 12-36% of at least one bivalent oxide selected from the group consisting of CaO, ZnO, MgO and CuO, 10-39% of at least one trivalent oxide selected from the group consisting of Al2O3, B2O3, La2O3, Y2O3 and the mixed rare earth oxides, the total number of said bivalent and trivalent oxides being at least three, and up to 10% of a tetravalent oxide selected from the group consisting of ZrO2, TiO2 and CeO2.

Bacon, J. F.↗
NASA NTRS1974

Non-toxic invert analog glass compositions of high modulus

Glass compositions having a Young's modulus of at least 15 million psi are described. They and a specific modulus of at least 110 million inches consist essentially of, in mols, 15 to 40% SiO2, 6 to 15% Li2O, 24 to 45% of at least two bivalent oxides selected from the group consisting of Ca, NzO, MgO and CuO; 13 to 39% of at least two trivalent oxides selected from the group consisting of Al2O3, Fe2O3, B2O3, La2O3, and Y2O3 and up to 15% of one or more tetravelent oxides selected from the group consisting of ZrO2, TiO2 and CeO2. The high modulus, low density glass compositions contain no toxic elements. The composition, glass density, Young's modulus, and specific modulus for 28 representative glasses are presented. The fiber modulus of five glasses are given.

Bacon, J. F.↗
NASA NTRS1976

High modulus rare earth and beryllium containing silicate glass compositions

Glass compositions having a Young's modulus of at least 16 million psi and a specific modulus of at least 110 million inches consisting essentially of approximately, by weight, 20 to 43% SiO2, 8 to 21% Al2O3, 4 to 10% BeO, 27 to 58% of at least one oxide selected from a first group consisting of Y2O3, La2O3, Nd2O3, Ce2O3, Ce2O3, and the mixed rare earth oxides, and 3 to 12% of at least one oxide selected from a second group consisting of MgO, ZrO2, ZnO and CaO are described. The molar ratio of BeO to the total content of the first group oxides is from 1.0 to 3.0.

Bacon, J. F.↗
NASA NTRS1981

Long term behavior of silicon germanium thermoelectric generators

Results of tests of the long term performance of SiGe radioisotope thermoelectric generators (RTG) are presented. Three modules were monitored for 17,000-32,300 hr at hot junction temperatures of 1,085, 1,055, and 1,000 C; coating the unicouples with a 12,000 A thick layer of Si3N4 protected the modules from Si sublimation. Output degraded less than 0.3-0.4%/1,000 hr over the testing period. Life tests on a multihundredwatt (MHW) SiGe generator with 312 couples at a hot shoe temperature of 1,040 C dealt with power of 150 W at 30 V, with 0.5%/1,000 hr performance degradation. Si deposition on the insulation was found to enhance electrical conductance until a saturation point was reached. Disassembly of a test module after 16,750 hr revealed a Mo build-up, SiN4 coating deterioration, and Ti diffustion from the hot shoe to cooler regions of the junction. The presence of an Al2O3 insulator was recognized as preventing coating loss. Performance records from the Voyager and Les-8 satellites' RTG's are compared and show similar, 0.25%/1,000 hr degradation rates; RTG storage is judged to be feasible and the tests lead to projections of a 600,000 hr lifetime for a SiGe RTG.

Shields, V.↗
NASA NTRS1982

Limits on the lunar temperature profile

Limits on the selenotherm are estimated using (1) a preferred set of bounds on the lunar electrical conductivity profile; (2) published laboratory conductivity vs. temperature data for an olivine and several aluminous orthopyroxenes; and (3) estimates for the Al2O3 content of the deep interior suggested by bulk composition models. The inferred limits are narrowest in the depth range 450 to 1350 km and are in accord with independent geophysical constraints. Thermal history models which yield present-day selenotherms that are in best agreement with these limits are those which permit subsolidus convection at depths greater than 800 km in the moon.

Hood, L. L.↗
NASA NTRS1980

Predictions of mineral assemblages in planetary interiors

It is shown that mineral compatibilities in the model system CaO-MgO-Al2O3-SiO2 can be applied to deduce the mineral assemblages expected in planetary interiors and their variation with depth. In general, the available estimates of bulk composition of the terrestrial planets suggest that the terrestrial planets can be divided into two groups based on their predicted mineral assemblages. The terrestrial, Venusian, and lunar bulk compositions are expected to display the following sequence of mineral assemblages with increasing pressure: plagioclase lherzolite, spinel lherzolite, and garnet lherzolite. The sequences expected in Martian and Mercurian are different: spinel-plagioclase wehrlite, spinel lherzolite, and spinel-garnet wehrlite. These assemblages have a major influence on the compositions of liquids produced by melting of these planetary interiors, on the solidus temperatures, and thus on the nature of planetary differentiation and the types of magmas extruded at planetary surfaces.

Stolper, E.↗
NASA NTRS1982

Compositional variation in the Hadley Apennine region

Orbital geochemical data in the Hadley Apennine region are related to typical rock compositions and used in determining the distribution of soils derived from the rock types found in this region. Orbital XRF Mg/Si and Al/Si intensities are the orbital data that are used primarily. These data are corrected for spurious interorbit variation using a modification of a previously developed method. The corrected values are than converted to % MgO and % Al2O3, respectively, from theoretical considerations, and as such are compared with similar concentrations for typical lunar rocks and soils of the Apollo 15 landing site. The relationship of the XRF values to Fe, Ti, and Th concentrations, derived from gamma-ray observations, is also considered. It is established that the orbital geochemistry data for this region are consistent with the presence of a mixture of ANT suite and Fra Mauro basalt components frequently dominated by a KREEP basalt component toward the west and by a mafic pyroclastic component toward the east.

Clark, P. E.↗