Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ASSIMILATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Comparing ecosystem and soil respiration: Review and key challenges of tower-based and soil measurements

The net ecosystem exchange (NEE) is the difference between ecosystem CO2 assimilation and CO2 losses to the atmosphere. Ecosystem respiration (Reco), the efflux of CO2 from the ecosystem to the atmosphere, includes the soil-to-atmosphere carbon flux (i.e., soil respiration; Rsoil) and aboveground plant respiration. Therefore, Rsoil is a fraction of Reco and by definition has to be smaller than Reco at annual, seasonal and daily scales. However, several studies estimating Reco with the eddy covariance technique and measuring Rsoil within the footprint of the tower have reported higher Rsoil than Reco at different time scales. Here, we compare four different and contrasting ecosystems (from forest to grasslands, and from boreal to semiarid) to study whether, and under what conditions, measurements of Reco are lower than Rsoil. In general, both fluxes showed similar temporal patterns, but Reco was not consistently higher than Rsoil from daily to annual scales across sites. We identified several issues that apply for measuring NEE and measuring/upscaling Rsoil that could result in an underestimation of Reco and/or an overestimation of Rsoil. These issues are discussed based on (a) nighttime measurements of NEE, (b) Rsoil measurements, and (c) the interpretation of the functional relationships of these fluxes with temperature (i.e., Q10). We highlight that there is still a need for better integration of Rsoil with eddy covariance measurements to address challenges related to spatial and temporal variability of Reco and Rsoil.

Barba, Josep↗

Preparation and characterization of cobalt-substituted anthrax lethal factor

Highlights: Black-Right-Pointing-Pointer Cobalt-substituted anthrax lethal factor (CoLF) is highly active. Black-Right-Pointing-Pointer CoLF can be prepared by bio-assimilation and direct exchange. Black-Right-Pointing-Pointer Lethal factor binds cobalt tightly. Black-Right-Pointing-Pointer The electronic spectrum of CoLF reveals penta-coordination. Black-Right-Pointing-Pointer Interaction of CoLF with thioglycolic acid follows a 2-step mechanism. -- Abstract: Anthrax lethal factor (LF) is a zinc-dependent endopeptidase involved in the cleavage of mitogen-activated protein kinase kinases near their N-termini. The current report concerns the preparation of cobalt-substituted LF (CoLF) and its characterization by electronic spectroscopy. Two strategies to produce CoLF were explored, including (i) a bio-assimilation approach involving the cultivation of LF-expressing Bacillus megaterium cells in the presence of CoCl{sub 2}, and (ii) direct exchange by treatment of zinc-LF with CoCl{sub 2}. Independent of the method employed, the protein was found to contain one Co{sup 2+} per LF molecule, and was shown to be twice as active as its native zinc counterpart. The electronic spectrum of CoLF suggests the Co{sup 2+} ion to be five-coordinate, an observation similar to that reported for other Co{sup 2+}-substituted gluzincins, but distinct from that documented for the crystal structure of native LF. Furthermore, spectroscopic studies following the exposure of CoLF to thioglycolic acid (TGA) revealed a sequential mechanism of metal removal from LF, which likely involves the formation of an enzyme: Co{sup 2+}:TGA ternary complex prior to demetallation of the active site. CoLF reported herein constitutes the first spectroscopic probe of LF's active site, which may be utilized in future studies to gain further insight into the enzyme's mechanism and inhibitor interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Metabolic engineering of Clostridium carboxidivorans for enhanced ethanol and butanol production from syngas and glucose

Clostridium carboxidivorans can convert CO 2 , CO and H 2 to ethanol and n -butanol; however, its industrial application is limited by the lack of tools for metabolic pathway engineering. In this study, C. carboxidivorans was successfully engineered to overexpress aor , adhE2 , and fnr together with adhE2 or aor . In glucose fermentation, all engineered strains showed higher alcohol yields compared to the wild-type. Strains overexpressing aor showed CO 2 re-assimilation during heterotrophic growth. In syngas fermentation, compared to the wild-type, the strain overexpressing adhE2 produced ~50% more ethanol and the strain overexpressing adhE2 and fnr produced ~18% more butanol and ~22% more ethanol. Interestingly, both strains showed obvious acid re-assimilation, with <0.15 g/L total acid remaining at the end of fermentation. Overexpressing fnr with adhE2 enhanced butanol production compared to only adhE2 . Furthermore, this is the first report of overexpressing homologous and heterologous genes in C. carboxidivorans for enhancing alcohols production from syngas and glucose.

09 BIOMASS FUELS↗

Conversion of depolymerized sugars and aromatics from engineered feedstocks by two oleaginous red yeasts

One of the requirements for efficient biological conversion of lignocellulose to bioproducts is the compatibility of biological catalysts with the processes employed to solubilize and depolymerize the lignocellulosic components. The red yeasts Rhodosporidium toruloides and Rhodotorula mucilaginosa were evaluated for their ability to assimilate sugars and aromatic compounds extracted from two engineered lines of Arabidopsis thaliana with modified lignin or the wild-type using ionic liquid, acid or alkaline pretreatments. Differential amounts of monomeric sugars, organic acids and, in the case of the engineered lines, either 4-hydroxybenzoic or protocatechuic acid were additionally released from the biomass and found to be tolerated and consumed by both microorganisms. Genetically-engineered strains of the two red yeasts successfully converted the depolymerized products into the biofuel precursor bisabolene when cultivated on hydrolysates or synthetic media containing specific sugars, acids and aromatics found in the hydrolysates.

Rodriguez, Alberto↗

Engineering and evolution of Yarrowia lipolytica for producing lipids from lignocellulosic hydrolysates

Yarrowia lipolytica, an oleaginous yeast, shows promise for industrial fermentation due to its robust acetyl-CoA flux and well-developed genetic engineering tools. However, its lack of an active xylose metabolism restricts the conversion of cellulosic sugars to valuable products. To address this, metabolic engineering, and adaptive laboratory evolution (ALE) were applied to the Y. lipolytica PO1f strain, resulting in an efficient xylose-assimilating strain (XEV). Whole-genome sequencing (WGS) of the XEV followed by reverse engineering revealed that the amplification of the heterologous oxidoreductase pathway and a mutation in the GTPase-activating protein gene (YALI0B12100g) might be the primary reasons for improved xylose assimilation in the XEV strain. When a sorghum hydrolysate was used, the XEV strain showed superior xylose consumption and lipid production compared to its parental strain (X123). This study advances our understanding of xylose metabolism in Y. lipolytica and proposes effective metabolic engineering strategies for optimizing lignocellulosic hydrolysates.

60 APPLIED LIFE SCIENCES↗

Effects of red imported fire ant ( Solenopsis invicta ) control on carrion use by vertebrate scavengers

Carrion is an important resource, and competition for carrion by microbial, invertebrate, and vertebrate scavenging communities is great. In particular, carrion is important to facultative and obligate vertebrate scavengers globally, and these species provide an irreplaceable ecological service by efficiently removing carcasses, which potentially harbor pathogens, from the environment. Although vertebrates efficiently acquire carcasses, they compete intensively with invertebrate and microbial communities, especially during warmer months when invertebrate and microbial activity peaks. The presence of invasive invertebrates may further exacerbate competition among scavenging groups; however, little is known about how invasive invertebrates can influence invertebrate scavenger dynamics and ultimately competition with vertebrate scavengers. The red imported fire ant (Solenopsis invicta; RIFA) is an invasive species of particular interest in North America, as it is a dominant predator and decomposer throughout much their range. We hypothesized that in areas where abundant, RIFA can outcompete vertebrates for carrion resources, altering nutrient cycling and food web dynamics. We tested this hypothesis by experimentally excluding RIFA from rabbit carcasses and found strong seasonal effects in our data; however, surprisingly, we found no effect of RIFA control on vertebrate scavenging efficiency, rates of carcass detection, carcass persistence, or the richness of local scavengers. Rather, we observed a highly efficient vertebrate scavenging community that assimilated 87.4% of carcasses during our study. Furthermore, this high rate of vertebrate scavenging efficiency was maintained in both control (93.0%) and RIFA treatment (81.8%) sites, suggesting presence of abundant RIFA populations did not limit vertebrate acquisition of carrion. Future research should focus on the interactions of RIFA with the remaining invertebrate scavenging community to further investigate whether RIFA impact the assimilation of carrion resources within invertebrate communities.

59 BASIC BIOLOGICAL SCIENCES↗

CO 2 storage site characterization using ensemble-based approaches with deep generative models

Estimating spatially distributed properties such as permeability from available sparse measurements is a great challenge in efficient subsurface CO 2 storage operations. In this paper, a deep generative model that can accurately capture complex subsurface structure is tested with an ensemble-based inversion method for accurate and accelerated characterization of CO 2 storage sites. We chose Wasserstein Generative Adversarial Network with Gradient Penalty (WGAN-GP) for its realistic reservoir property representation and Ensemble Smoother with Multiple Data Assimilation (ES-MDA) for its robust data fitting and uncertainty quantification capability. WGAN-GP are trained to generate high-dimensional permeability fields from a low-dimensional latent space and ES-MDA then updates the latent variables by assimilating available measurements. Several subsurface site characterization examples including Gaussian, channelized, and fractured reservoirs are used to evaluate the accuracy and computational efficiency of the proposed method and the main features of the unknown permeability fields are characterized accurately with reliable uncertainty quantification. Furthermore, the estimation performance is compared with a widely-used variational, i.e., optimization-based, inversion approach, and the proposed approach outperforms the variational inversion method in several benchmark cases. We explain such superior performance by visualizing the objective function in the latent space: because of nonlinear and aggressive dimension reduction via generative modeling, the objective function surface becomes extremely complex while the ensemble approximation can smooth out the multi-modal surface during the minimization. This suggests that the ensemble-based approach works well over the variational approach when combined with deep generative models at the cost of forward model runs unless convergence-ensuring modifications are implemented in the variational inversion.

42 ENGINEERING↗

Development of a GPU-based high-performance radiative transfer model for the Infrared Atmospheric Sounding Interferometer (IASI)

Satellite-observed radiance is a nonlinear functional of surface properties and atmospheric temperature and absorbing gas profiles as described by the radiative transfer equation (RTE). In the era of hyperspectral sounders with thousands of high-resolution channels, the computation of the radiative transfer model becomes more time-consuming. The radiative transfer model performance in operational numerical weather prediction systems still limits the number of channels we can use in hyperspectral sounders to only a few hundreds. To take the full advantage of such high-resolution infrared observations, a computationally efficient radiative transfer model is needed to facilitate satellite data assimilation. In recent years the programmable commodity graphics processing unit (GPU) has evolved into a highly parallel, multi-threaded, many-core processor with tremendous computational speed and very high memory bandwidth. The radiative transfer model is very suitable for the GPU implementation to take advantage of the hardware's efficiency and parallelism where radiances of many channels can be calculated in parallel in GPUs. In this paper, we develop a GPU-based high-performance radiative transfer model for the Infrared Atmospheric Sounding Interferometer (IASI) launched in 2006 onboard the first European meteorological polar-orbiting satellites, METOP-A. Each IASI spectrum has 8461 spectral channels. The IASI radiative transfer model consists of three modules. The first module for computing the regression predictors takes less than 0.004% of CPU time, while the second module for transmittance computation and the third module for radiance computation take approximately 92.5% and 7.5%, respectively. Our GPU-based IASI radiative transfer model is developed to run on a low-cost personal supercomputer with four GPUs with total 960 compute cores, delivering near 4 TFlops theoretical peak performance. By massively parallelizing the second and third modules, we reached 364x speedup for 1 GPU and 1455x speedup for all 4 GPUs, both with respect to the original CPU-based single-threaded Fortran code with the -O{sub 2} compiling optimization. The significant 1455x speedup using a computer with four GPUs means that the proposed GPU-based high-performance forward model is able to compute one day's amount of 1,296,000 IASI spectra within nearly 10 min, whereas the original single CPU-based version will impractically take more than 10 days. This model runs over 80% of the theoretical memory bandwidth with asynchronous data transfer. A novel CPU-GPU pipeline implementation of the IASI radiative transfer model is proposed. The GPU-based high-performance IASI radiative transfer model is suitable for the assimilation of the IASI radiance observations into the operational numerical weather forecast model.

97 MATHEMATICS AND COMPUTING↗

Neural operator prediction of linear instability waves in high-speed boundary layers

Here, we investigate if neural operators can predict the linear evolution of instability waves in high-speed boundary layers. To this end, we extend the design of the DeepOnet to ensure accurate and robust predictions, and also to perform data assimilation. In particular, we train DeepONet to take as inputs an upstream disturbance and a downstream location of interest, and to provide as output the perturbation field downstream in the boundary layer. DeepONet thus approximates the linearized and parabolized Navier-Stokes operator for this flow. For successful application to the high-speed boundary layer problem, we add sample weighting and Fourier input features to the regular DeepONet formulation. Once trained, the DeepOnet can perform fast and accurate predictions of the downstream disturbances within the range of training frequencies (inside the distribution). In addition, we show that DeepONet can solve the inverse problem, where downstream wall measurements are adopted as input, and a trained network can predict the upstream disturbances that led to these observations. This capability, along with the forward predictions, allows us to perform a full data assimilation cycle efficiently: starting from wall-pressure data, we predict the upstream disturbance using the inverse DeepONet and its evolution using the forward DeepONet. Finally, we introduce three new metrics to benchmark the training, evaluation and break-even cost of neural operators.

42 ENGINEERING↗

Evaluation of Cross Section Uncertainties Using Physical Constraints: Focus on Integral Experiments

Evaluation of neutron-induced reactions between 0 eV and 20 MeV is mainly based on nuclear reaction models with parameters estimated from data assimilation on experiments. Several inconsistencies may appear such as mismatches for the cross sections, larger uncertainties on boundary and no cross-correlations between high energy domain and resonance range. In addition, different evaluations could give good overall behaviour of integral experiments with large compensating effects among them. After a summary of several methods which take into account physical constraints on overlapping energy domains where two nuclear reaction models are needed, we focus on a review of the use of integral experiments as additional physical constraints in the evaluation of parameters and cross section covariances. In particular, we present comparison of traditional multigroup adjustment with data assimilation based on nuclear model parameters by the analysis of JEZEBEL. A general consistency is obtained between these adjustments as well as important reduction of fission cross section uncertainties.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Wildfire-Power Grid Interactions: Feedback, Impacts, Monitoring, Modeling, and Mitigation Strategies

Wildfires are increasingly interacting with electric power systems through a two-way hazard chain: fires damage grid assets and trigger cascading outages, while grid faults can ignite new fires under hot, dry, and windy conditions. This review synthesizes the state of knowledge across five domains: (i) physical impacts of flames, heat, and smoke on lines, towers, insulators, and substations; (ii) power-infrastructure-initiated ignitions via conductor clash, high-impedance faults, and corona discharge; (iii) widespread blackouts and disproportionate societal impacts; (iv) multi-scale monitoring spanning laboratory tests, in-situ and grid-integrated sensors, and Earth observation; (v) coupled modeling that links fire behavior with grid operations; and (vi) technological and strategic mitigation pathways spanning prevention, response, and recovery. We integrate these domains into a novel 'feedback-aware' socio-technical framework. Through a longitudinal analysis (2005-2025) of global incidents, we identify that while vegetation contact remains the most frequent ignition source, aging infrastructure failure has emerged as a critical driver of catastrophic 'mega-fires'. We further identify persistent gaps, including limited interoperability of high-frequency grid and environmental data, scarce real-time data assimilation, and under-developed equity metrics for outage management. We conclude by outlining a research agenda to (1) deploy interoperable sensing architectures, (2) advance feedback-coupled fire-grid simulations, and (3) evaluate mitigation portfolios through techno-economic and fairness lenses. Recognizing wildfire-grid interactions as coupled socio-technical systems is essential for protecting infrastructure and communities and for ensuring reliable, sustainable electricity in a changing world.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Assessing fungal contributions to cellulose degradation in soil by using high-throughput stable isotope probing

Soils represent one of the largest and most active pools of C in the biosphere, and soil respiration represents a major component of global C flux. Fungi are essential to soil carbon cycling due to their propensity for decomposing organic polymers such as cellulose. We performed high throughput sequencing enabled stable isotope probing (HTS-SIP) with 13 C-cellulose to characterize the dynamics of fungi and bacteria during cellulose degradation in an agricultural soil. Here, a total of 1900 fungal taxa were observed and 190 of these assimilated 13 C-cellulose during a 30-day incubation. A majority of 13 C-labeled fungi belonged to Ascomycota, Basidiomycota, and Mucoromycota. However, most 13 C-labeled fungi could not be annotated at the species (71%, n = 134), or genus (49%, n = 93) level. Mucoromycota were 13 C-labeled early, and by day 3 the most abundant 13 C-labeled organism belonged to Mortierella. In contrast, 13 C-labeled Ascomycota increased in diversity through day 14 and their relative abundance comprised more than 40% of fungal ITS sequences by day 30. These results show that: i) the majority of fungal taxa that assimilated 13 C from 13 C-cellulose are uncultivated and poorly characterized, ii) the beta-diversity of 13 C-labeled fungi changed significantly over time during cellulose degradation, iii) a relatively small number of the 13 C-labeled taxa dominated the community response to cellulose, and iv) fungi incorporated cellulose into DNA more rapidly and in greater numbers than did bacteria. Furthermore, these results show that fungi in a tilled agricultural field respond rapidly to new cellulose inputs, exhibiting complex temporal dynamics that likely drive carbon flow into diverse taxa within the soil community.

59 BASIC BIOLOGICAL SCIENCES↗

Carbon-conserving bioproduction of malate in an E. coli -based cell-free system

Formate, a biologically accessible form of CO 2 , has attracted interest as a renewable feedstock for bioproduction. However, approaches are needed to investigate efficient routes for biological formate assimilation due to its toxicity and limited utilization by microorganisms. Cell-free systems hold promise due to their potential for efficient use of carbon and energy sources and compatibility with diverse feedstocks. However, bioproduction using purified cell-free systems is limited by costly enzyme purification, whereas lysate-based systems must overcome loss of flux to background reactions in the cell extract. Here, we engineer an E. coli-based system for an eight-enzyme pathway from DNA and incorporate strategies to regenerate cofactors and minimize loss of flux through background reactions. We produce the industrial di-acid malate from glycine, bicarbonate, and formate by engineering the carbon-conserving reductive TCA and formate assimilation pathways. We show that in situ regeneration of NADH drives metabolic flux towards malate, improving titer by 15-fold. Background reactions can also be reduced 6-fold by diluting the lysate following expression and introducing chemical inhibitors of competing reactions. Together, these results establish a carbon-conserving, lysate-based cell-free platform for malate production, producing 64 μM malate after 8 h. This system conserves 43 % of carbon otherwise lost as CO 2 through the TCA cycle and incorporates 0.13 mol CO 2 equivalents/mol glycine fed. Finally, techno-economic analysis of cell-free malate production from formate revealed that the high cost of lysate is a key challenge to the economic feasibility of the process, even assuming efficient cofactor recycling. This work demonstrates the capabilities of cell-free expression systems for both the prototyping of carbon-conserving pathways and the sustainable bioproduction of platform chemicals.

60 APPLIED LIFE SCIENCES↗

Radiocarbon analysis of soil microbial biomass via direct chloroform extraction

Microbial processing of soil organic matter is a significant driver of C cycling, yet we lack an understanding of what shapes the turnover of this large terrestrial pool. In part, this is due to limited options for accurately identifying the source of C assimilated by microbial communities. Laboratory incubations are the most common method for this; however, they can introduce artifacts due to sample disruption and processing and can take months to produce sufficient CO 2 for analysis. We present a biomass extraction method which allows for the direct 14 C analysis of microbial biomolecules and compare the results to laboratory incubations. In the upper 50 cm soil depths, the Δ 14 C from incubations was indistinguishable from that of extracted microbial biomass. Below 50 cm, the Δ 14 C of the biomass was more depleted than that of the incubations, either due to the stimulation of labile C decomposition in the incubations, the inclusion of biomolecules from non-living cells in the biomass extractions, or differences in C used for assimilation versus respiration. Our results suggest that measurement of Δ 14 C of microbial biomass extracts can be a useful alternative to soil incubations.

54 ENVIRONMENTAL SCIENCES↗

Detecting inhomogeneities in the Twentieth Century Reanalysis over the central United States

The Twentieth Century Reanalysis (20CR), which spans the 138 year period from 1871 to 2008, was intended for a variety of climate applications, including long–term trend assessment. Because over land 20CR only assimilates surface pressure observations and their count increases by an order of magnitude over the course of the record, a key question is whether the 20CR is homogenous and hence suitable for detecting climate–related changes. We use three statistical methods (Pettitt and Bai–Perron tests and segmented regression) to detect abrupt shifts in multiple hydrometeorological variable mean and uncertainty fields over the central United States. For surface air temperature and precipitation, we use the Climate Research Unit (CRU) time series data set for comparison. We find that for warm–season months, there is a consensus change point among all variables between 1940 and 1950, which is not substantiated by the CRU record. While we cannot say with certainty that these shifts in the 20CR analysis fields are artificial, our statistical analyses, coupled with a visual inspection of the underlying assimilated observational count time series, strongly point to this conclusion. Furthermore, our recommendation is therefore for users to restrict climate trend applications over the central United States to the second half century of the 20CR record, after observational density has stabilized.

54 ENVIRONMENTAL SCIENCES↗

Parameterizing Perennial Bioenergy Crops in Version 5 of the Community Land Model Based on Site‐Level Observations in the Central Midwestern United States

Abstract With projected expansion of biofuel production at a global scale, there is a pressing need to develop adequate representation of bioenergy crops in land surface models to help effectively quantify the biogeophysical and biogeochemical effects of its associated land use changes. This study implements two new perennial bioenergy crops, Miscanthus and switchgrass, into the Community Land Model Version 5 based on site‐level observations from the midwestern United States by modifying parameters associated with photosynthesis, phenology, allocation, decomposition, and carbon cost of nitrogen uptake and integrating concomitantly land management practices. Sensitivity analyses indicate that carbon and energy fluxes of the perennial crops are most sensitive to photosynthesis and phenology parameters. Validation of simulated fluxes against site‐level measurements demonstrates that the model is capable of capturing the overall patterns of energy and carbon fluxes, as well as physiological transitions from leaf emergence to senescence. Compared to annual crops, perennial crops feature longer growing season, greater leaf areas, and higher productivity, leading to increased transpiration, lower annual runoff, and larger carbon uptake. The model simulations suggest that with higher CO 2 assimilation rates and lower demands for nutrients and water, high‐yielding perennial crops are promising alternatives of bioenergy feedstocks compared to traditional annual crops not only for mitigating climate change but also for environmental conservation purposes by reducing fertilizer application and therefore alleviating surface‐ and ground‐water contaminations. Although the local‐scale simulations shed light on potential benefits of using perennial grasses as bioenergy feedstocks, quantifying consequences of their plantations at larger scales warrants additional investigation.

Cheng, Yanyan↗

Projecting Permafrost Thaw of Sub-Arctic Tundra With a Thermodynamic Model Calibrated to Site Measurements

Northern circumpolar permafrost thaw affects global carbon cycling, as large amounts of stored soil carbon becomes accessible to microbial breakdown under a warming climate. The magnitude of carbon release is linked to the extent of permafrost thaw, which is locally variable and controlled by soil thermodynamics. Soil thermodynamic properties, such as thermal diffusivity, govern the reactivity of the soil-atmosphere thermal gradient, and are controlled by soil composition and drainage. In order to project permafrost thaw for an Alaskan tundra experimental site, we used seven years of site data to calibrate a soil thermodynamic model using a data assimilation technique. The model reproduced seasonal and interannual temperature dynamics for shallow (5–40 cm) and deep soil layers (2–4 m), and simulations of seasonal thaw depth closely matched observed data. The model was then used to project permafrost thaw at the site to the year 2100 using climate forcing data for three future climate scenarios (RCP 4.5, 6.0, and 8.5). Minimal permafrost thawing occurred until mean annual air temperatures rose above the freezing point, after which we measured over a 1 m increase in thaw depth for every 1 °C rise in mean annual air temperature. Under no projected warming scenario was permafrost remaining in the upper 3 m of soil by 2100. We demonstrated an effective data assimilation method that optimizes parameterization of a soil thermodynamic model. The sensitivity of local permafrost to climate warming illustrates the vulnerability of sub-Arctic tundra ecosystems to significant and rapid soil thawing.

54 ENVIRONMENTAL SCIENCES↗

Volatile Element Evidence of Local MORB Mantle Heterogeneity Beneath the Southwest Indian Ridge, 48°–51°E

Abstract The mantle source beneath the Southwest Indian Ridge (SWIR) reflects a complex history of contamination. Magmatic volatile contents are vital tracers of these kinds of heterogeneities, which may fractionate otherwise constant volatile/non‐volatile elemental ratios, such as the H 2 O/Ce ratio. Although several studies have recently used trace element and isotopic data to address mantle source heterogeneity and magmatic processes at SWIR 48°–51°E region, volatile element constraints provide a valuable test of models for the origins of mantle heterogeneities in this region. Here, we present new data for nine rare basaltic glass samples from the 48°–51°E region, which enable careful assessment of the effects of primary versus secondary processes on the glass volatile contents. These samples are strongly affected by variable extents of carbon degassing, and shallow assimilation of Cl‐rich fluid, but also reveal consistently high H 2 O/Ce ratios (458.8 ± 14.9), among the highest in MORBs, that cannot be explained by late‐stage secondary processes, crustal assimilation, or simple melting of peridotite mantle at variable depths. Instead, the high H 2 O/Ce ratios are features of the mantle source composition. The 48°–51°E region is notably more depleted in highly incompatible trace elements relative to other regions of the SWIR, although this depletion is not apparent in H 2 O, which is similarly abundant throughout the SWIR. We link the high H 2 O/Ce ratios in these glasses with other trace element characteristics diagnostic of subduction and fluid addition, suggesting that the mantle source reflects signatures of a refractory mantle residue that previously melted within a subduction zone.

Wang, Wei↗