Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “AMINES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30
All sourcesNASA NTRSDOE OSTI
DOE OSTI2012

Controlled drug release on amine functionalized spherical MCM-41

MCM-41 silica with spherical morphology and small particle sizes (100 nm) was synthesized and modified by post-synthesis method with different amounts of 3-aminopropyltriethoxysilane (APTES). A comparative study of the adsorption and release of a model drug, ibuprofen, was carried out. The modified and drug loaded mesoporous materials were characterized by XRD, TEM, N{sub 2} physisorption, elemental analysis, thermal analysis and FT-IR spectroscopy. A new method was developed for the quantitative determination of amino groups in surface modified mesoporous materials by the ninhydrin reaction. Good correlation was found between the amino content of the MCM-41 materials determined by the ninhydrin method and their ibuprofen adsorption capacity. Amino modification resulted in high degree of ibuprofen loading and slow release rate in comparison to the parent non-modified MCM-41. - Graphical abstract: Determination of surface amino groups by ninhidrin method. Highlights: Black-Right-Pointing-Pointer Spherical MCM-41 modified by different amounts of APTES was studied. Black-Right-Pointing-Pointer Ibuprofen (IBU) adsorption and release characteristics was tested. Black-Right-Pointing-Pointer The ninhydrin reaction was used for the quantitative determination of amino groups. Black-Right-Pointing-Pointer Stoichiometric amount of APTES is enough for totally covering the surface with amino groups. Black-Right-Pointing-Pointer Good correlation was found between the amino content and IBU adsorption capacity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2013

Syntheses and characterizations of two new energetic copper–amine-DNANT complexes and their effects on thermal decomposition of RDX

Two novel copper complexes of dinitroacetonitrile (DNANT), Cu(NH{sub 3}){sub 4}(DNANT){sub 2} (1) and Cu(en){sub 2}(DNATN){sub 2} (2), have been synthesized for the first time through an unique reaction, and structurally characterized. The single-crystal X-ray structural analysis shows that the Cu{sup 2+} cations in the two complexes share a similar four-coordinated structure, which however does not directly involve the main energetic DNANT{sup −} anion. The differential scanning calorimetry (DSC) study reveals that the two complexes have higher thermal stability and lower sensitivity than the analogous FOX-7 complexes, and exhibit good catalytic action to the decomposition of RDX. - Graphical abstract: Cu(NH{sub 3}){sub 4}(DNANT){sub 2} (1) and Cu(en){sub 2}(DNATN){sub 2} (2) have been first synthesized through an unique reaction. Cu{sup 2+} ion shares a similar four-coordinated structure in the two complexes. Display Omitted - Highlights: • A new reaction is unexpectedly found, and reaction process was discussed in this work. • Cu(NH{sub 3}){sub 4} (DNANT){sub 2}and Cu(en){sub 2}(DNATN){sub 2} were first synthesized through an unique reaction. • The structures and properties of the two complexes were discussed in detail, and they all present good application performances. • The adjacent amino-hydrazino group in AHDNE exhibits high reactivity. The work is another typical example for the reactivity.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Efficient alkene epoxidation catalyzed by molybdenyl acetylacetonate supported on aminated UiO-66 metal−organic framework

Metal–organic frameworks (MOFs) containing Mo Schiff base complexes were prepared by post-synthesis method and applied as efficient catalysts in the epoxidation of alkenes with tert-BuOOH. In this manner, UiO-66-NH{sub 2} (UiO=University of Oslo) MOF was reacted with salicylaldehyde and thiophene-2-carbaldehyde to produce bidentate Schiff bases. Then, the Schiff base ligands were used for immobilization of molybdenyl acetylacetonate. These new catalysts were characterized by FT-IR, UV–vis spectroscopic techniques, X-ray diffraction (XRD), BET, inductively coupled plasma atomic emission spectroscopy (ICP-AES) and field emission scanning electron microscopy (FE-SEM). These catalytic systems showed excellent activity in the epoxidation of alkenes such as cyclic and linear ones with tert-butyl hydroperoxide (TBHP) in 1,2-dichloroethane, and reused several times without any appreciable loss of their activity. - Graphical abstract: Efficient alkene epoxidation with TBHP catalyzed by heterogeneous and reusable molybdenum base catalysts is reported. - Highlights: • UiO-66-NH{sub 2} was modified with salicylaldehyde and thiophene-2-carbaldehyde. • The Schiff base groups were used for immobilization of MoO{sub 2}(acac){sub 2}. • The heterogeneous catalysts were prepared. • The prepared catalysts were used for epoxidation of alkenes. • Compared to other catalyst, our catalysts were more efficient and forceful.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Fractionation of critical metals from authentic acid mine drainage using a multi-bed immobilized amine sorbent setup: A field site study

Here for the first time reported, a flow-through multi-fixed bed immobilized amine/silica sorbent strategy was employed to fractionate purified critical metals from authentic acid mine drainage (AMD). The U.S. Department of Energy’s (DOE) National Energy Technology Laboratory’s (NETL) patent-pending Multi-functional Sorbent Technology (MUST) sorbents were used to recover critical metals from AMD at the Pittsburgh Botanic Garden (Pittsburgh, PA USA). By adjusting the AMD/sorbent ratio, we recovered > 80% of pure adsorbed Mn (by adsorbed metal weight) and >90% pure adsorbed Al at lab-scale. Further optimizing the weight hourly space velocity (WHSV) enhanced the rate of adsorbed Al recovery by over five times, justifying a field site test. After treating >100 L of AMD at the field site, the optimized polyamine/epoxysilane/aminosilane sorbent recovered approximately 0.7 wt% adsorbed Al at > 90% purity. A tangible amount of purified aluminum hydroxide [Al(OH) 3 ] and aluminum sulfate [Al 2 (SO 4 ) 3 ] solids were then recovered after eluting and precipitating the previously adsorbed metals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Design of a bifunctional TEMPO-tertiary amine mesoporous silica catalyst for the three-step cascade synthesis of a chromene derivative

A key challenge is design of materials and processes whereby competing reagents or conditions do not harm the multi-step sequence, thus allowing for more efficient chemical synthesis with elimination of work-up and separation steps. In this work, a three-step reaction cascade is performed using a porous bifunctional dimethylpropylamine-TEMPO-MCM41 catalyst, converting the commodity chemicals benzyl alcohol, sodium hypochlorite, and malononitrile to a biologically active anti-cancer, and anti-malarial 2-amino-chromene derivative. The cascade first utilizes a TEMPO-catalyzed oxidation of benzyl alcohol to benzaldehyde with NaOCl as the terminal oxidant. This is followed by a two-step, dual base catalyzed Knoevenagel condensation with malononitrile followed by a Michael addition with lawsone. Optimal conditions converting benzyl alcohol to 2-amino-5,10-dioxo-4-phenyl-5,10-dihydro-4H-benzo[g]chromene-3-carbonitrile include the delayed addition of malononitrile and lawsone during the three-step reaction sequence, which results in a 2-amino-chromene yield of over 80%. The importance of stepwise reagent addition is rationalized due to the unfavorable adsorption of acidic lawsone on the surface-grafted base catalyst. Tertiary Brønsted base sites of dimethylpropylamine outperform the more Lewis basic primary propylamine functionalized catalyst. This work outlines a simple and effective method for generating mesoporous materials with two types of active sites via co-condensation and thiol-ene coupling procedures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Amine-functionalized (Al) MIL-53/VTEC™ mixed-matrix membranes for H 2 /CO 2 mixture separations at high pressure and high temperature

In this report VTEC™ PI-1388 and 20 wt% (Al) NH 2 -MIL-53/VTEC™ PI-1388 mixed-matrix membranes (MMMs) with different thicknesses were tested for gas permeation of H2 and CO 2 from 5 to 30 bar and from 35 to 300 °C. 50/50 H 2 /CO 2 mixtures were also tested at 30 bar and 250 °C with stage cuts that ranged from 0.05 to 1. Gas permeation data show that the affinity of (Al) NH 2 -MIL-53 for VTEC™ PI-1388 is strong enough to perform gas separations under these conditions. At 30 bar and at temperatures above 200 °C, the performance of the MMMs for H 2 /CO 2 separation improved significantly with increasing temperature. Specifically, the H 2 permeability of the MMM at 300 °C increased by 70% with respect to that of VTEC™ PI-1388 (VTEC™ PI-1388: H 2 = 85 Barrer, H 2 /CO 2 = 4.0; MMM: H 2 = 144 Barrer, H 2 /CO 2 = 5.8). Gas mixture separations using VTEC™ PI-1388 and the MMM depended on the stage cut and reached a maximum H 2 /CO 2 separation of 7.2 for VTEC™ PI-1388 and 7.5 for the MMM at a stage cut of 0.05.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Impact of DMP-30 catalyst concentration on the degradation and kinetics of bisphenol A epoxy thermosets cured with linear amine hardener

Epoxy thermosets are a crucial component in carbon-fiber composites, serving as the organic binding matrix. Catalysts are commonly used in prepolymer formulations to accelerate curing of the thermosets. However, the impact of catalysts on the thermal stability, degradation pathways, and kinetics of the final thermoset is poorly understood. Here, in this work, Product-Specific Kinetics (PSK) analysis was utilized with isoconversional kinetics to provide a first look into the degradation kinetics of major pyrolysis pathways in bisphenol A (BPA) epoxy resins and determine the impact of altering catalysis concentrations on these kinetic pathways. Results revealed new insights into previously identified degradation pathways, provided evidence of multiple degradation pathways for some products, and showed that use of excess catalyst results in polymer network alterations and reduced thermal stability of the thermosets.

Bisphenol A↗