Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ALD”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Core-shell Si@TiO 2 nanosphere anode by atomic layer deposition for Li-ion batteries

Silicon (Si) is regarded as next-generation anode for high-energy lithium-ion batteries (LIBs) due to its high Li storage capacity (4200 mA h g -1 ). However, the mechanical degradation and resultant capacity fade critically hinder its practical application. In this regard, we demonstrate that nanocoating of Si spheres with a 3 nm titanium dioxide (TiO 2 ) layer via atomic layer deposition (ALD) can utmostly balance the high conductivity and the good structural stability to improve the cycling stability of Si core material. The resultant sample, Si@TiO 2 -3 nm core–shell nanospheres, exhibits the best electrochemical performance of all with a highest initial Coulombic efficiency and specific charge capacity retention after 50 cycles at 0.1C (82.39% and 1580.3 mA h g -1 ). In addition to making full advantage of the ALD technique, we believe that our strategy and comprehension in coating the electrode and the active material could provide a useful pathway towards enhancing Si anode material itself and community of LIBs.

25 ENERGY STORAGE↗

Effect of Al 2 O 3 coating on fretting wear performance of Zr alloy

Fretting wear caused by flow-induced vibration (FIV) is one of the predominant tribological failure modes in nuclear power plants and industry. This paper presents an experimental study of the effect on fretting performance of alumina (Al 2 O 3 ) coatings produced by atomic layer deposition (ALD) on Zirlo (a Zr alloy), a common nuclear fuel cladding alloy. A coating with uniform thickness of about 750 nm was deposited onto a Zirlo flat. Because the typical thickness of fuel cladding is 1 mm, an ultra-thin coating is required. The hardness and elastic modulus of the ALD coating were measured by nano-indentation techniques. With a pin-on-flat contact configuration in low-amplitude reciprocating contact, fretting performance was measured for uncoated Zirlo, Al2O 3 -coated Zirlo, and Al 2 O 3 -coated Zirlo followed by heat treatment. Results showed that the as-deposited Al 2 O 3 coating provided slight improvement in fretting wear performance. However, the heat-treated coating showed two orders of magnitude reduction in fretting wear of the Zr alloy. Wear in the uncoated material involves some local plastic deformation and debris accumulation at the contact interface. In the Al 2 O 3 -coated material, wear occurred by transfer of transparent Al 2 O 3 oxide into the steel pin counterface. Localized removal of coating from the Zirlo alloy flat resulted in a “shark whale” pattern in a scanning electron microscopy image. There was minimal debris accumulation with the heat-treated sample.

36 MATERIALS SCIENCE↗

Nanoscopic Titanium Dioxide Overlayers Improve the Durability of Porphyrin Molecular Electrocatalysts while Maintaining Molecular Structure and Redox Activity

Molecular catalysts, such as metalated porphyrins, are attractive cocatalysts for photocatalytic water splitting owing to their potential to simultaneously catalyze target reactions at their metal center, extend charge-separated-state lifetimes, and accumulate the requisite charge for product formation. However, porphyrin catalysts, like most molecular catalysts, are often limited by poor stability associated with demetalation, inactivation by undesired bonding (e.g., O2 coordination/redox/dimerization), and detachment from electrode supports or semiconducting photoabsorbers. In this study, nanoscopic titanium dioxide (TiO2) overlayers, deposited by atomic layer deposition (ALD), are demonstrated to encapsulate cobalt(III) meso-tetra(4-carboxyphenyl) porphyrin chloride (CoTCPP) molecular catalysts and thereby improve their adhesion to electrode surfaces over a wide range of electrode potentials spanning from -1.0 V vs RHE to +1.8 V vs RHE. Through analysis of Raman and ultraviolet-visible spectroscopy, it was confirmed that the metalloporphyrin structure was maintained when the surface-bound CoTCPP was encapsulated by 10 - 250 ALD cycles (~2 - 18 nm thick) of TiO2. Additional characterization of CoTCPP catalysts before and after electrochemical measurements reveals that up to 97% of the encapsulated CoTCPP remains tethered to the electrode surface after chronoamperometry tests under hydrogen evolution reaction (HER) conditions, compared to <36% for unencapsulated CoTCPP. This study also shows that encapsulated CoTCPP molecules remain partially redox active for overlayers up to 8 nm, which can also attenuate undesired redox mediator back reactions like ferricyanide reduction.

08 HYDROGEN↗

Direct Deposition of Crystalline Ta 3 N 5 Thin Films on FTO for PEC Water Splitting

Tantalum Nitride is a promising photoanode material for solar water splitting, but the further study and practical use is constrained by the harsh conditions of the synthesis from Ta metal. Here we report the direct deposition of crystalline Ta 3 N 5 on FTO substrate via a custom-built ALD system. A combination of TaCl 5 (Ta-precursor) and ammonia (N-source) were sequentially pulsed into the ALD reactor with the substrate heated to 550 °C to deposit compact and thin films of Ta 3 N 5 with controllable thicknesses on FTO substrates. Importantly, it is shown that the FTO is chemically and structurally stable under the reducing conditions of ammonia at 550 °C. These electrodes produced an exceptional photocurrent onset potential of ~ 0.3 V vs. RHE with a maximum photocurrent of ~ 2.4 mA cm -2 at 1.23 V vs RHE. Results of photoelectrochemical investigations as a function of film thickness and illumination direction reveal that the performance of Ta 3 N 5 is controlled by a hole diffusion length of ~50 nm. These results are crucial for the successful integration of Ta 3 N 5 in efficient unassisted water splitting applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis Gas Conversion over Rh/Mo Catalysts Prepared by Atomic Layer Deposition

Conversion of synthesis gas into value-added products, including oxygenates and C 2+ hydrocarbons, was studied at 523 K, 580 psi, and a 1/1 CO/H 2 ratio over Rh catalysts on catalyst supports prepared by atomic layer deposition (ALD) of molybdenum and tungsten species on silica. The reactivity measurements showed that coating the silica support with molybdenum and tungsten species helped to suppress the methane selectivity and promote the overall conversion rate. When the silica support was coated with five cycles of β-Mo 2 C, the methane selectivity decreased from 32% (1% Rh/SiO 2 ) to 13% (1% Rh/5c-Mo 2 C/SiO 2 ), and the overall product rate increased 33 times from 0.4 to 12.7 mmol min –1 (g of Rh) –1 . CO-FTIR results showed that supporting Rh on silica led to the formation of Rh(211) facets, which favored the formation of methane and had a higher CO conversion rate. Rh on a MoO 3 /SiO 2 support prepared by ALD was found to be the most active catalyst while maintaining the suppression of methane selectivity, showing an overall rate ~60 times higher than that of 1% Rh/SiO 2 . A reaction pathway is proposed, in which hydrogenation steps are promoted most significantly by Mo and W species, followed by promotion of CO insertion steps for ethanol synthesis and C–C coupling steps for hydrocarbon formation. CO-FTIR results showed that 1% Rh/MoO 3 /SiO 2 has the highest proportion of gem-dicarbonyl adsorption sites and the lowest proportion of bridge-bonded CO adsorption sites. As a result, the rate of methanol formation shows a positive correlation with the number of sites that form gem-dicarbonyl species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of Rh–titanate (ATiO 3 ) interactions on high-surface-area perovskite thin films prepared by atomic layer deposition

Thin, ~1 nm films of CaTiO 3 , SrTiO 3 , and BaTiO 3 were deposited onto MgAl 2 O 4 by Atomic Layer Deposition (ALD) and studied as catalyst supports for Rh. Scanning Transmission Electron Microcopy (STEM) and X-Ray Diffraction (XRD) demonstrated that the films had the perovskite structure and formed uniform coatings stable up to 1073 K. Rh, added by ALD, interacted strongly with CaTiO 3 and somewhat less strongly with SrTiO 3 , while Rh on BaTiO 3 was similar to Rh on unmodified MgAl 2 O 4 . STEM measurements of Rh on CaTiO 3 films showed Rh remained well dispersed after repeated oxidations and reductions at 1073 K; however, the Rh was inactive for CO-oxidation. Rh formed small particles on SrTiO 3 films and was active for CO oxidation after reduction at 1073 K. The reducibility and catalytic activity of Rh/BaTiO 3 /MgAl 2 O 4 were similar to that of Rh/MgAl 2 O 4 . Evidence from CO-TPR, FTIR, and XPS all indicated that the degree of interaction between Rh and the three perovskite films can be ranked in the following order: Rh/CaTiO 3 /MgAl 2 O 4 > Rh/SrTiO 3 /MgAl 2 O 4 > Rh/BaTiO 3 /MgAl 2 O 4 . Here, bulk ex-solution catalysts, synthesized by reduction of ATi 0.98 Rh 0.02 O 3 (A = Ca, Sr, and Ba), were also examined for comparison.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Aluminum Mirror Coatings for UVOIR Telescope Optics Including the Far UV

NASA Cosmic Origins (COR) Program identified the development of high reflectivity mirror coatings for large astronomical telescopes particularly for the far ultra violet (FUV) part of the spectrum as a key technology requiring significant materials research and process development. In this paper we describe the challenges and accomplishments in producing stable high reflectance aluminum mirror coatings with conventional evaporation and advanced Atomic Layer Deposition (ALD) techniques. We present the current status of process development with reflectance of approx. 55 to 80% in the FUV achieved with little or no degradation over a year. Keywords: Large telescope optics, Aluminum mirror, far UV astrophysics, ALD, coating technology development.

large telescope optics↗

Mathematical Modelling of Arctic Polygonal Tundra with Ecosys: 2. Microtopography Determines How CO 2 and CH 4 Exchange Responds to Changes in Temperature and Precipitation

Differences of surface elevation in arctic polygonal landforms cause spatial variation in soil water contents (θ), active layer depths (ALD), and thereby in CO 2 and CH 4 exchange. In this paper, we test hypotheses in ecosys for topographic controls on CO 2 and CH 4 exchange in trough, rim, and center features of low- and flat-centered polygons (LCP and FCP) against chamber and eddy covariance (EC) measurements during 2013 at Barrow, Alaska. Larger CO 2 influxes and CH 4 effluxes were measured with chambers and modeled with ecosys in LCPs than in FCPs and in lower features (troughs) than in higher (rims) within LCPs and FCPs. Spatially aggregated CO 2 and CH 4 fluxes from ecosys were significantly correlated with EC flux measurements. Lower features were modeled as C sinks (52–56 g C m -2 yr -1 ) and CH 4 sources (4–6 g C m -2 yr -1 ), and higher features as near C neutral (-2–15 g C m -2 yr -1 ) and CH 4 neutral (0.0–0.1 g C m -2 yr -1 ). Much of the spatial and temporal variations in CO 2 and CH 4 fluxes were modeled from topographic effects on water and snow movement and thereby on θ, ALD, and soil O 2 concentrations. Model results forced with meteorological data from 1981 to 2015 indicated increasing net primary productivity in higher features and CH 4 emissions in some lower and higher features since 2008, attributed mostly to recent rises in precipitation. Finally, small-scale variation in surface elevation causes large spatial variation of greenhouse gas (GHG) exchanges and therefore should be considered in estimates of GHG exchange in polygonal landscapes.

54 ENVIRONMENTAL SCIENCES↗

Ultrathin Amorphous Silica Membrane Enhances Proton Transfer across Solid-to-Solid Interfaces of Stacked Metal Oxide Nanolayers while Blocking Oxygen

A large jump of proton transfer rates across solid-to-solid interfaces by inserting an ultrathin amorphous silica layer into stacked metal oxide nanolayers is discovered using electrochemical impedance spectroscopy and Fourier-transform infrared reflection absorption spectroscopy (FT-IRRAS). The triple stacked nanolayers of Co 3 O 4 , SiO 2 , and TiO 2 prepared by atomic layer deposition (ALD) enable a proton flux of 2400 ± 60 s -1 nm -2 (pH 4, room temperature), while a single TiO 2 (5 nm) layer exhibits a threefold lower flux of 830 s -1 nm -2 . Based on FT-IRRAS measurements, this remarkable enhancement is proposed to originate from the sandwiched silica layer forming interfacial SiOTi and SiOCo linkages to TiO 2 and Co 3 O 4 nanolayers, respectively, with the O bridges providing fast H + hopping pathways across the solid-to-solid interfaces. Finally, together with the complete O 2 impermeability of a 2 nm ALD-grown SiO 2 layer, the high flux for proton transport across multi-stack metal oxide layers opens up the integration of incompatible catalytic environments to form functional nanoscale assemblies such as artificial photosystems for CO 2 reduction by H 2 O.

36 MATERIALS SCIENCE↗

Impact of Conformality and Crystallinity for Ultrathin 4 nm Compact TiO 2 Layers in Perovskite Solar Cells

The rapid rise in power conversion efficiencies of lead-based perovskite solar cells (PSCs) has established their promise, motivating scale-up and commercialization. As a thin film solar cell, interfacial properties are key to the performance of PSCs; there is a need to further understand which properties are important to control. Here, the impact of the compact TiO 2 (com-TiO 2 ) film properties on the performance of mesoporous PSCs is studied. Com-TiO 2 layers are fabricated by spray pyrolysis as well as by atomic layer deposition (ALD), using ALD as a proof-of-concept method to achieve highly conformal films of precisely controlled thickness. The com-TiO 2 layers’ conformality and surface roughness are examined by microscopy techniques; their relative crystallinity is studied by grazing-incidence X-ray diffraction with a synchrotron source and an in situ annealing chamber; and completed devices are analyzed by J–V and impedance spectroscopy techniques. The results show that an ultraconformal comTiO 2 layer can be thinned to 4 nm and match the performance of a ≈50 nm spray-pyrolysis TiO 2 layer. This work concludes that film conformality is the primary consideration for creating a high-performing com-TiO 2 layer, overriding any effects of flm crystallinity—a fnding that can guide fabrication choices for the scale-up of PSCs.

36 MATERIALS SCIENCE↗

Large-Area Lasing in Nanoscale Complex Media: The Critical Role of Local Dielectric Environment

Controlling how electromagnetic waves interact with complex media is critical for applications in imaging and focusing. Such lightwave interactions with complex media can lead to dramatic optical effects like lasing. While much work in random lasing focus on understanding how gain and scattering co-operatively generate lasing, little work has focused on how to manipulate the lasing threshold without modifying the structural disorder. Here, a simple, mostly unexplored, strategy is demonstrated that employs atomic layer deposition (ALD) to tune the local near-field environment while preserving the underpinning disorder—controlling lasing in a nanoscale complex medium on a large scale (>cm 2 ). The nanoscale complex medium is a quasi-2D system of coupled zinc oxide nanospheres with overall thickness deep in the sub-wavelength regime (≈λ/4). Near-ultraviolet femtosecond spectroscopy probes the broadband response of the gain nanomaterial, details how ALD process fundamentally modifies the fast-picosecond and slow-nanosecond carrier dynamics, and informs on the relevant timescales critical for lasing. Full-field electromagnetic simulations provide critical insights about how near-field dielectric environment modifies the nanostructure's scattering cross-section, which ultimately results in enhanced lasing. Importantly, these results highlight a simple path to control how electromagnetic waves interact in a complex medium, a key step toward large-scale implementation of complex lasers.

36 MATERIALS SCIENCE↗

Pareto Optimal Spectrally Selective Emitters for Thermophotovoltaics via Weak Absorber Critical Coupling

Tailoring the emission spectra of a thermophotovoltaic (TPV) emitter away from that of a blackbody has the potential to minimize transmission and thermalization loss in a photovoltaic receiver. Selective TPV emitters can lead to solar energy conversion with efficiency greater than the Shockley-Queisser limit and can facilitate the generation of useful energy from waste heat. A new design is introduced to radically tune thermal emission that leverages the interplay between two resonant phenomena in simple planar nanostructures-absorption in weakly absorbing nanofilms and reflection in multilayer dielectric stacks. A virtual screening approach is employed to identify promising structures for a selective thermal emitter from a search space of millions, several of which approach the ideal values of a step-function selective thermal emitter. One of these structures is experimentally fabricated and evaluated, which includes a weakly absorbing alloy with tailored optical properties fabricated by atomic layer deposition (ALD). The versatility of the design and fabrication approach result in an emitter with excellent spectral density (0.8 W cm(-2) sr(-1)) and spectral efficiency (46.8%) at 1373 K. Future experimental challenges to a more accurate realization of the optimal structures calculated are also considered.

atomic layer deposition↗

Tuning Intermediate Bands of Protective Coatings to Reach the Bulk-Recombination Limit of Stable Water-Oxidation GaP Photoanodes

Stable photoelectrochemical solar fuel production requires protective coatings to achieve effective charge separation, transport, and injection at the semiconductor–liquid interfaces, implying that the coating should energetically align its intermediate band (IB) with both the photoabsorber's band edge and co-catalyst's potentials. Yet approaches to adjust coating IB positions to accommodate various semiconductor light absorbers for constructing efficient and stable photoelectrodes have not been developed. In this report, three types of transition metal (M = Mn 2+ , Mn 3+ , and Cr 3+ ions) alloyed TiO2 coatings are discovered using atomic layer deposition (ALD). The IB energetics of these coatings are characterized by X-ray photoelectron spectroscopy and are found to be tunable inside the TiO 2 bandgap, through varying ALD growth conditions. By applying these coatings to n-type GaP and integrating with IrO x co-catalysts, the water-oxidation J–E performance is comparable to an uncoated corroding GaP photoanode. It reaches the bulk recombination limit of the GaP and achieves ≈28% absorbed photon to current efficiency under 475-nm light excitation (6.48 mW cm -2 ) and 100-h stable water oxidation. The outstanding performance and stability are attributed to the efficient charge separation and hole transport, as allowed by the energy alignment of the coating IB and the GaP valence band edge.

36 MATERIALS SCIENCE↗

Monitoring Structural and Electronic Changes of Supported Metal Catalysts Using Combined X‐Ray Techniques

Supported metal nanoparticle catalysts have become increasingly crucial for many catalytic applications. However, long-term catalyst stability remains a problem due to catalyst deactivation caused by coke formation and sintering. The deposition of a thin overcoating via atomic layer deposition (ALD) onto metal-supported nanoparticles has shown to greatly inhibit catalyst deactivation. This work utilizes a model catalyst system comprised of Pt nanoparticles supported on Al 2 O 3 to demonstrate the effect of an atomically thin overcoating on supported metal nanoparticles. Continuous operando small-angle X-ray scattering (SAXS) and X-ray absorption near edge spectroscopy (XANES) monitor structural and electronic changes to the catalyst and overcoating during calcination. SAXS data fitting reveals the formation of nanopores in the overcoating at high temperatures, while XANES monitors the oxidation state of the Pt catalyst. Herein, the usefulness of combined X-ray techniques is demonstrated to characterize supported metal catalysts to further understanding of the synergistic effects of the ALD overcoating to aid in the design of new catalyst materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Effect of Surface Terminations on the Initial Stages of TiO 2 Deposition on Functionalized Silicon

As atomic layer deposition (ALD) emerges as a method to fabricate architectures with atomic precision, emphasis is placed on understanding surface reactions and nucleation mechanisms. ALD of titanium dioxide with TiCl 4 and water has been used to investigate deposition processes in general, but the effect of surface termination on the initial TiO 2 nucleation lacks needed mechanistic insights. Here, this work examines the adsorption of TiCl 4 on Cl–, H–, and HO– terminated Si(100) and Si(111) surfaces to elucidate the general role of different surface structures and defect types in manipulating surface reactivity of growth and non-growth substrates. The surface sites and their role in the initial stages of deposition are examined by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). Density functional theory (DFT) computations of the local functionalized silicon surfaces suggest oxygen-containing defects are primary drivers of selectivity loss on these surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Macrophage-derived MLKL in alcohol-associated liver disease: Regulation of phagocytosis

Mixed lineage kinase domain-like pseudokinase (MLKL), a key terminal effector of necroptosis, also plays a role in intracellular vesicle trafficking that is critical for regulating liver inflammation and injury in alcohol-associated liver disease (ALD). Although receptor interacting protein kinase 3 (Rip3) -/- mice are completely protected from ethanol-induced liver injury, Mlkl -/- mice are only partially protected. Therefore, we hypothesized that cell-specific functions of MLKL may contribute to ethanol-induced injury. Bone marrow transplants between Mlkl -/- mice and littermates were conducted to distinguish the role of myeloid versus nonmyeloid Mlkl in the Gao-binge model of ALD. Ethanol-induced hepatic injury, steatosis, and inflammation were exacerbated in Mlkl -/- →wild-type (WT) mice, whereas Mlkl deficiency in nonmyeloid cells (WT→Mlkl -/- ) had no effect on Gao-binge ethanol-induced injury. Importantly, Mlkl deficiency in myeloid cells exacerbated ethanol-mediated bacterial burden and accumulation of immune cells in livers. Mechanistically, challenging macrophages with lipopolysaccharide (LPS) induced signal transducer and activator of transcription 1–mediated expression and phosphorylation of MLKL, as well as translocation and oligomerization of MLKL to intracellular compartments, including phagosomes and lysosomes but not plasma membrane. Importantly, pharmacological or genetic inhibition of MLKL suppressed the phagocytic capability of primary mouse Kupffer cells (KCs) at baseline and in response to LPS with/without ethanol as well as peripheral monocytes isolated from both healthy controls and patients with alcohol-associated hepatitis. Further, in vivo studies revealed that KCs of Mlkl -/- mice phagocytosed fewer bioparticles than KCs of WT mice. Together, these data indicate that myeloid MLKL restricts ethanol-induced liver inflammation and injury by regulating hepatic immune cell homeostasis and macrophage phagocytosis.

60 APPLIED LIFE SCIENCES↗

Amorphous alumina thin films deposited on titanium: Interfacial chemistry and thermal oxidation barrier properties

Ti/Al 2 O 3 bilayer stacks are used as model systems to investigate the role of atomic layer deposition (ALD) and chemical vapor deposition (CVD) to prepare 30-180 nm thick amorphous alumina films as protective barriers for the medium temperature oxidation (500-600⁰C) of titanium, which is employed in aeronautic applications. X-ray diffraction (XRD), transmission electron microscopy (TEM) with selected area electron diffraction (SAED), and X-ray photoelectron spectroscopy (XPS) results show that the films produced from the direct liquid injection (DLI) CVD of aluminum tri-isopropoxide (ATI) are poor oxygen barriers. The films processed using the ALD of trimethylaluminum (TMA) show good barrier properties but an extensive intermixing with Ti which subsequently oxidizes. In contrast, the films prepared from dimethyl aluminum isopropoxide (DMAI) by CVD are excellent oxygen barriers and show little intermixing with Ti. Overall, these measurements correlate the effect of the alumina coating thickness, morphology, and stoichiometry resulting from the preparation method to the oxidation barrier properties, and show that compact and stoichiometric amorphous alumina films offer superior barrier properties.

36 MATERIALS SCIENCE↗

Spatial Atomic Layer Deposition of Aluminum Oxide as a Passivating Hole Contact for Silicon Solar Cells

In this work, tunneling aluminum oxide (Al 2 O 3 ) passivation layers are demonstrated to be a candidate for hole collecting, passivating contacts when coupled with a boron-doped surface. Here, these very thin Al 2 O 3 films (1.5-3 nm) are deposited using spatial atomic layer deposition (ALD) on boron diffused (110-115 Ω –1 ) hydrophilic surfaces operating as metal-insulator-semiconductor (MIS) contacts. Emitter saturation current density values of approximately ≈57 fA cm 2 are achieved for Al 2 O 3 film thicknesses of 2 nm before metallization. At this same thickness, contact resistivity values of 33 mΩ cm 2 are obtained after metallization. Most importantly, the boron diffusion, wet chemical surface preparation, and spatial ALD of Al 2 O 3 used to create these MIS structures were all performed with industrially relevant equipment on Cz wafers.

14 SOLAR ENERGY↗