Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ACTIVATION ENERGY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 541 records · Page 30

Smarter Grid Solutions | National Renewable Energy Laboratory: Active Management Integration: June 2015 - November 2016

This report presents the project results for the NREL INTEGRATE demonstration project: Active Network Management (ANM) Integration. Consistent with the INTEGRATE program's objective of increasing the grid's clean energy hosting capacity and providing grid services in a holistic manner, the project demonstrated the use of ANM to enable very high penetrations of solar PV and wind energy systems. Results obtained using a representative North American distribution system showed ANM's autonomous distributed control doubled the interconnected wind and solar systems by managing thermal and voltage constraints in real-time. These generators flexibly interconnected to the grid via ANM's end-to-end control architecture, and were managed and coordinated with other smart distributed energy resources (DER; e.g. EVs, battery ESS, controllable load) to unlock the grid's dynamic hosting capacity. As a smart grid application to standardize grid integration of diverse renewable generation sources, ANM provides the industry with a scalable, cost-effective alternative to traditional transmission and distribution (T&D) reinforcements. This project considered three use cases of the application of ANM: a Smart Home demonstration of ANM control of residential scale devices (PV, EV, and battery ESS); a Smart Campus demonstration of high penetration megawatt-scale DER (PV, EVs, battery ESS, and controllable load) behind a single point-of-common-coupling (PCC), and a Smart Distribution demonstration that combined prior use cases along with additional community/utility-scale DER at very high aggregate penetration levels. The Smart Distribution use case provided an integrated perspective of ANM across all distribution grid DER device scales (incorporating aggregated Smart Homes and the Smart Campus) in order to showcase how these devices can support smart grid services to manage DER related constraints in a safe and reliable manner; and likewise how ANM integrates with grid modernization initiatives. The ANM system was deployed in NREL's Energy Systems Integration Facility (ESIF), and project industry advisors attended an on-site demonstration and a set of workshops in order to review project outcomes and evaluate the relevance of ANM for increasing the grid hosting capacity. The outcomes of this effort include an assessment of opportunities for field deployment of ANM to address existing interconnection challenges, as well as consolidating project advisor suggestions for investment in ANM and potential future pilots for more advanced schemes.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Photoisomerization dynamics of 3,3'-diethyloxadicarbocyanine iodide in ionic liquids: Breakdown of hydrodynamic Kramers model

Photoisomerization dynamics of 3,3{sup '}-diethyloxadicarbocyanine iodide (DODCI) has been examined in a series of 1-alkyl-3-methylimidazolium (alkyl = methyl, ethyl, propyl, butyl, and hexyl) bis(trifluoromethylsulfonyl)imides by measuring its fluorescence lifetimes and quantum yields. This study has essentially been undertaken to find out whether the process of photoisomerization of DODCI in ionic liquids is different compared to that observed in conventional solvents such as alcohols. Activation energy of the reaction has been attained with the aid of isoviscosity plots and was found to be 22 {+-} 3 kJ mol{sup -1}, which is a factor of two higher compared to that obtained in alcohols. The significantly higher activation energy obtained in bis(trifluoromethylsulfonyl)imides compared to alcohols is probably due to the highly ordered nature of the ionic liquids, which hinders the twisting process. Kramers theory has been applied to understand the reduced isomerization rate constants in terms of solvent friction. As in case of alcohols, the isomerization data could not be explained by the Kramers model. However, a power law relation, which is a phenomenological functional form, could mimic the observed trend.

36 MATERIALS SCIENCE↗

Influence of composition and heat treatment in CdCl{sub 2} solution on intrinsic point defects in CdTe films

CdTe films of different compositions were grown by the chemical molecular-beam deposition method. The activation energy and the nature of deep levels in relation with the composition of films based on the temperature dependence of electroconductivity are defined, and the influence on these levels of heat treatment process in CdCl{sub 2} solution has been studied. Deep levels with the following activation energies are defined: E{sub v} +0.31 eV; E{sub v} + 0.42 ± 0.03 eV; E{sub c}–0.44 ± 0.01 eV; E{sub c}–0.28 eV; E{sub v} + 0.24 ± 0.01 eV.

36 MATERIALS SCIENCE↗

DLTS Investigation of the Energy Spectrum of Si:Mg Crystals

Electrically active centers in n-type magnesium-doped silicon crystals are studied by deep-level transient spectroscopy (DLTS). Magnesium is introduced by diffusion from a metal film on the surface at 1100°C. It is found that two levels with a similar concentration of ~6 × 10{sup 14} cm{sup –3} dominate in the DLTS spectrum; the value approximately corresponds to the interstitial magnesium (Mg{sub i}) concentration expected from diffusion conditions and published data on the Hall effect. The dependence of the electron emission rate from these levels on the electric-field strength agrees qualitatively with the Poole–Frenkel effect, which indicates the donor nature of both levels, although the absolute value of the effect differs from theoretical value. The activation energies of these levels found by the extrapolation of emission rates measured at various temperatures to zero field are 112 and 252 meV, which coincides within the accuracy with energies of ground states of the first and second donor levels of Mg determined previously from optical absorption. Thus, it is shown that when using high-quality initial material and the selected diffusion mode, interstitial magnesium atoms are the dominant centers with levels in the upper half of the band gap.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Constitutive Behavior and Hot Workability of a Hot Isostatic Pressed Ti-22Al-25Nb Alloy during Hot Compression

A Ti-22Al-25Nb alloy was fabricated from prealloyed powders by hot isostatic pressing for 2 h at a temperature of 1050 °C and pressure of 100 MPa. The hot deformation behavior of the Ti-22Al-25Nb alloy was characterized by isothermal compression testing at deformation temperatures between 900 and 1060 °C and strain rates between 0.001 and 1 s{sup −1}. Based on the true stress–strain curves, a constitutive equation was constructed to describe the flow stress as a function of the strain rate and deformation temperature. Three-dimensional (3D) processing maps were developed based on dynamic material model theory using the stress flow data to identify the instability and optimization regions of the hot processing parameters. The results show that the flow stress decreases with increasing deformation temperature and decreasing strain rate, and the softening mechanisms are different under different deformation conditions. The apparent activation energies in the (α{sub 2} + β/B2 + O) and (α{sub 2} + B2) phase regions are calculated to be 865.177 and 590.661 kJ/mol, respectively, which suggests that the hot isostatic pressed (HIPed) Ti-22Al-25Nb alloy requires a high hot deformation activation energy. Combined with microstructural observations, the optimal processing domains are determined to be a temperature range of 1030-1060 °C and strain rate range of 0.01-0.1 s{sup −1} in the α{sub 2} + B2 phase region. Moreover, the results indicate that adiabatic shear bands and severe inhomogeneous deformation cause flow instability at lower temperatures (900-1005 °C) and higher strain rates (> 0.1 s{sup −1}).

36 MATERIALS SCIENCE↗

Effect of Ca Doping on the Electrical Conductivity of the High-Temperature Proton Conductor LaNbO4

The sintering properties, crystal structure and electrical conductivity of La1-xCaxNbO4- (x=0, 0.005, 0.01, 0.015, 0.02 and 0.025), prepared by a conventional solid-state method, have been investigated using powder X-ray diffraction (XRD), scanning electron microscopy (SEM) and electrochemical impedance spectroscopy (EIS). In 2.5% Ca doped samples, a small amount of impurities Ca2Nb2O7 were observed from the XRD patterns. Impedance spectra show that the grain boundary resistance increases with increasing Ca content, while the bulk resistance remains essentially constant below 550 C. Despite the higher degree of grain growth was observed for higher Ca-doping levels, the total conductivity of the La1-xCaxNbO4- series decreases with increasing Ca content from 0.5 to 2.0 mol%. The activation energy for the total conductivity decreases with increasing Ca content from 0.71 eV (x=0) to 0.54 eV (x=0.01) for the high temperature tetragonal phase, then it increases to 0.60 eV for x=0.02. For the monoclinic phase, La0.995Ca0.005NbO4- shows the lowest activation energy of 1.26 eV. These results imply that the solubility of CaO in LaNbO4 is in the range from 0.5 to 1.0 mol%. By increasing the sintering temperature from 1500 C to 1550 C, the proton conductivity of the Ca-doped LaNbO4 was improved with enlarged grain size due to a reduction in the resistive grain boundary contribution.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Self-Diffusivity Measurement of Eutectic F 7 LiNaK with and without Additives Using Quasi-Elastic Neutron Scattering

The atomic scale relaxation dynamics of eutectic F 7 LiNaK (46.5 LiF–11.5 NaF–42 KF mol %, Li-7 enriched) were measured using quasi-elastic neutron scattering (QENS) over a temperature range of 500–750 °C. Here, the effect of adding 0.988 mol % cerium, 0.499 mol % cesium, and 1.21 mol % zirconium individually to the dynamics of F 7 LiNaK was also investigated. The relaxation process in both pure and doped F 7 LiNaK molten salts was fit with a stretched exponential function and the temperature dependence follows an Arrhenius behavior over a wavevector transfer range of 0.4 Å –1 < Q < 0.9 Å –1 . The measured activation energy for self-diffusion is E a = 0.77 ± 0.02 eV/atom for pure molten F 7 LiNaK. The QENS response with additives added to F 7 LiNaK was also fit with a stretched exponential and the associated Arrhenius behavior was characterized with activation energies of E a = 0.88 ± 0.01 eV/atom for zirconium (1.21 mol %), E a = 1.02 ± 0.02 eV/atom for cerium (0.988 mol %), and E a = 0.71 ± 0.03 eV/atom for cesium (0.499 mol %). The measured diffusivities are compared to those simulated with a neural network force field model by Lee et al. [Lee, S.-C. Comparative Studies of the Structural and Transport Properties of Molten Salt FLiNaK Using the Machine-Learned Neural Network and Reparametrized Classical Forcefields. J. Phys. Chem. B 2021, 125(37), 10562–10570].

FLiNaK↗

Material Discovery and High Throughput Exploration of Ru Based Catalysts for Low Temperature Ammonia Decomposition

High throughput experimentation has the capability to generate massive, multidimensional datasets, allowing for the discovery of novel catalytic materials. Here, we show the synthesis and catalytic screening of over 100 unique Ru-Metal-K based bimetallic catalysts for low temperature ammonia decomposition, with a Ru loading between 1–3 wt% Ru and a fixed K loading of 12 wt% K, supported on γ-Al2O3. Bimetallic catalysts containing Sc, Sr, Hf, Y, Mg, Zr, Ta, or Ca in addition to Ru were found to have excellent ammonia decomposition activity when compared to state-of-the-art catalysts in literature. Furthermore, the Ru content could be reduced to 1 wt% Ru, a factor of four decrease, with the addition of Sr, Y, Zr, or Hf, where these secondary metals have not been previously explored for ammonia decomposition. The bimetallic interactions between Ru and the secondary metal, specifically RuSrK and RuFeK, were investigated in detail to elucidate the reaction kinetics and surface properties of both high and low performing catalysts. The RuSrK catalyst had a turnover frequency of 1.78 s−1, while RuFeK had a turnover frequency of only 0.28 s−1 under identical operating conditions. Based on their apparent activation energies and number of surface sites, the RuSrK had a factor of two lower activation energy than the RuFeK, while also possessing an equivalent number of surface sites, which suggests that the Sr promotes ammonia decomposition in the presence of Ru by modifying the active sites of Ru.

McCullough, Katherine (ORCID:0000000197525740)↗

Synthesis and structure of novel lithium-ion conductor Li{sub 7}Ge{sub 3}PS{sub 12}

The novel lithium-ion conductor Li{sub 7}Ge{sub 3}PS{sub 12} was synthesized by slow cooling from the ternary Li{sub 2}S–GeS{sub 2}–P{sub 2}S{sub 5} system, and was shown to exhibit a cubic argyrodite-type structure. The phase composition was determined by varying the ratio of starting materials; the observed monophasic properties were close to those for the Li{sub 7}Ge{sub 3}PS{sub 12} composition. The lattice parameter (a =9.80192(3) Å) of Li{sub 7}Ge{sub 3}PS{sub 12} was slightly smaller than that of Li{sub 7}PS{sub 6} (a =9.993 Å), indicating that substitution of a Li cation by the smaller Ge cation contracted the cubic lattice. In addition, the novel structure consisted of a framework composed of four isolated (Ge/P)S{sub 4} tetrahedra. Li{sup +} ions occupied tetrahedral sites within the framework, forming a three-dimensional conduction pathway. Finally, Li{sub 7}Ge{sub 3}PS{sub 12} exhibited a high ionic conductivity of 1.1×10{sup −4} S cm{sup −1} at 25 °C and an activation energy of 25 kJ mol{sup −1}. - Graphical abstract: A novel Li{sub 7}Ge{sub 3}PS{sub 12} solid lithium ion conductor, with cubic argyrodite strucuture, shows high ion conductivity of 1.1×10{sup –4} S cm{sup –1} with an activation energy of 25 kJ mol{sup –1}. The argyrodite structure consists of (Ge/P)S{sub 4} tetrahedra units along with partial occupation of lithium and germanium at 48 h site. - Highlights: • A novel lithium-ion conductor Li{sub 7}Ge{sub 3}PS{sub 12} was detected. • This was achieved through slow cooling of the ternary Li{sub 2}S–GeS{sub 2}–P{sub 2}S{sub 5} system. • This novel conductor revealed a cubic argyrodite-type structure. • Li{sub 7}Ge{sub 3}PS{sub 12} exhibited a high ionic conductivity of 1.1×10{sup −4} S cm{sup −1} at 25 °C. • These properties will aid in the design of superior lithium-ion conductors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of interfaces in AlSb/InAs/Ga₀.₇₁In₀.₂₉Sb quantum wells by photoluminescence

We have investigated excitation power and temperature dependent PL spectra to systematically study the influences of the interfaces in the both InAs/Ga₀.₇₁In₀.₂₉Sb and InAs/AlSb on the optical properties of AlSb/Ga₀.₇₁In₀.₂₉Sb/InAs quantum wells (QWs). The localized states as well as the activation energy were analyzed to discuss the possible thermal quenching and non-radiative recombination mechanisms. We found two non-radiative recombination processes were involved in the thermal quenching of radiative emission for the QW structures. The GaAs-like interface in InAs/Ga₀.₇₁In₀.₂₉Sb with higher activation energy (62.7 meV) in high temperature region (70 K–300 K) supplies a deeper hole confinement and less roughness than the InSb-like one, which suppress non-radiative recombination process and promote the optical qualities of the quantum wells. The peak energy of the InSb-like sample exhibited “step-curve” behavior with increase temperature. Neither InSb-like nor AlAs-like interface in InAs/AlSb favored the radiative emission efficiency.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Order and phase nucleation in non-equilibrium nanocomposite Fe-Pt thin films with perpendicular magnetic anisotropy.

We report on the time evolution of mass transport upon annealing nonequilibrium Fe-Pt nanocomposite films, leading to nucleation of L1{sub 0} chemically ordered phase. The nonequilibrium nanocomposite films were fabricated by applying Fe{sup +} ion implantation to epitaxial Pt films grown on (001) MgO substrates, yielding Fe nanoclusters embedded in a Pt matrix at a tailored penetration depth. Time-resolved x-ray diffraction studies were carried out using synchrotron radiation, allowing determination of the activation energy for nucleation of the FePt L1{sub 0} phase within the segregated nanoclusters during annealing. The growth of the segregated L1{sub 0} ordered phase was modeled using ideal grain-size law and found to be dominated by strain-driven surface nucleation. The activation energies were found to correlate with the nanocluster size. Magnetic characterization of selected annealed samples indicates perpendicular magnetic anisotropy with high coercive field coincident with high value of the chemical order parameter of the ordered phase within the magnetic nanoclusters.

36 MATERIALS SCIENCE↗

Kinetics of Reduction of Fe(III) Complexes by Outer Membrane Cytochromes MtrC and OmcA of Shewanella oneidensis MR-1

Shewanella Oneidensis MR-1 possesses up to 42 c-type cytochromes with heme content varying between 1 to as many as 37. Among them, the outer-membrane cytochromes, particularly MtrC and OmcA, are suspected to function as terminal reductases and are responsible for its enzymatic catalysis capability. So far, the mechanisms of metal reduction by these outer-membrane cytochromes are unknown. In this work, we report the study of reduction kinetics of a series of Fe(III) complexes with citrate, NTA and EDTA by abiotically reduced MtrC and OmcA using a stopped-flow technique in combination with theoretical computation methods within the framework of the electron transfer theory of Marcus and speciation calculations based on the current thermodynamic database. Stopped-flow kinetic data showed that the reaction was very fast and appeared to proceed in two stages, a fast stage that completes in much less than a second and a slower stage afterwards. For a given complex, the reaction is faster by reduction with MtrC than OmcA, while for a given protein, the reaction completes in the decreasing order of Fe-EDTA > Fe-NTA > Fe-citrate. All the stopped-flow kinetic curves could be modeled by two parallel second-order bimolecular redox reactions with second-order rate constants ranging from 0.872 µM -1 s -1 for the fast reaction between MtrC with Fe-EDTA complex to 0.012 µM -1 s -1 for the slow reaction between OmcA and Fe-citrate complex. Speciation calculations indicated that at both metal:ligand ratios, 1:1.5 and 1:10, a single dominant ferric complex was responsible for the observed reaction for each ligand and, therefore, the observed dual-reaction pathways was attributed to the differences in the reduction behavior among various heme groups within each protein. The results of redox potential calculations with known thermodynamic data show only small differences on the scale of a few millivolts among the three complexes, suggested that the observed differences in reaction rate cannot be explained by the overall redox reaction free energy. In contrast, reorganization energies calculated based on DFT-COSMO model are substantially different between the complexes, with a larger reorganization energy and therefore a larger activation energy associated with the citrate complex, and progressively smaller ones for the NTA and EDTA complexes. In combination with approximate electronic coupling terms, the theoretical results show good agreement with the observed trend and implicate the reorganization energy as the key factor in the kinetic reaction.

59 BASIC BIOLOGICAL SCIENCES↗

Kinetics of soot oxidation by NO2

Modern technologies use NO2 to promote low temperature soot oxidation for diesel particulate filter regeneration. Most previous methods studied soot oxidation with NO2 using offline methods such as thermo-gravimetric analysis (TGA). In this study, the online aerosol-technique of high-temperature oxidation tandem differential mobility analysis (HTO-TDMA) is used to study kinetics of soot oxidation with NO2 under N2 environment. This method has significant advantages over previous offline methods in reducing heat and mass transfer diffusion limitations to the soot surface. Soot particles are exposed to varying temperature and NO2 concentration inside the furnace resulting from thermal decomposition of NO2 to NO. This causes soot oxidation rates to vary throughout the furnace. In this study, variations in temperatures, NO2 concentrations and particle residence times are thoroughly accounted for the first time, and soot oxidation rates are derived. Soot oxidation rate is calculated as a function of Arrhenius rate constant Asoot, activation energy Esoot, and partial pressure of NO2 PNO2 within the furnace at temperatures ranging 500- 950 C. Results suggest Asoot and Esoot values for soot oxidation with NO2 of 1.68 nm K-0.5 s-1 (Nm-2)-n and 46.5 kJ mol-1 respectively. The activation energy for soot oxidation with NO2 is significantly lower than oxidation with air. However, ppm levels of NO2 cause soot oxidation at low temperatures suggesting NO2 is a stronger oxidant than O2. This study also shows that a semi-empirical approach with just a few kinetic parameters could represent varying soot oxidation rates in a diesel engine cylinder or on a diesel particulate filter. Further studies should be directed towards understanding synergistic effects of other oxidants as O2 and H2O in addition to NO2 using the HTO-TDMA method.

33 ADVANCED PROPULSION SYSTEMS↗

A chemical kinetically based ignition delay correlation for iso-octane covering a wide range of conditions including the NTC region

An ignition delay correlation has been developed for iso-octane based on the functional behavior exhibited by a detailed chemical kinetic mechanism. The correlation employs a traditional Arrhenius-based, power law formulation, {tau}=A{phi}{sup {alpha}}p{sup {beta}}{chi}{sub O{sub 2}}{sup {gamma}} x exp ({lambda}), including dependencies for equivalence ratio ({phi}), pressure (p) and oxygen percentage ({chi}{sub O2}). However the exponents for these parameters, {alpha}, {beta}, and {gamma}, respectively, are expressed as third-order polynomials with respect to temperature in order to capture changes in functionality seen across different regimes. At very low temperatures {alpha}, {beta}, and {gamma} are forced to a constant value, as seen within the mechanism. The activation energy term, {lambda}, is written as a combination of two quadratic expressions so that the behavior in the negative temperature coefficient (NTC) region can be captured. A pressure-dependent term is also included in the expression for {lambda} in order to reduce the activation energy at higher pressures in the NTC region due to increased low temperature reactivity, and the appearance of cool flame, or low temperature heat release (LTHR). The resulting expression contains 37 constants. The new correlation is applicable over a wide range of conditions and can be used for data comparisons and mechanism evaluation, as well as systems-level engineering simulations. In this work experimental data from rapid compression machines (RCM) and shock tubes (ST) are compared through normalizing features of the correlation, and the performance of a detailed kinetic mechanism is evaluated based on the functional behavior of the {alpha}, {beta}, {gamma} and {lambda} parameters. Six hundred and sixty-one (661) data points have been used to fit the 37 constants of the expression where the experimental conditions cover {phi}=0.2-2.0, p=1-60atm, {chi}{sub O{sub 2}} and T=650-2000 K. Data normalized through the correlation indicate a standard deviation of {+-}4%. Departures from the correlation can be attributed to an incomplete description of the functional dependencies, some inconsistencies with regard to diluent composition, experimental uncertainties, and facility-influenced phenomena. The experimental points have also been simulated using the LLNL detailed iso-octane mechanism, where the computed ignition delay times have been fit to the new correlation. Agreement and differences between the correlated experimental and simulation {alpha}, {beta}, {gamma} and {lambda} functions are highlighted, where it is noted that there is a substantial discrepancy concerning the increased low temperature chemistry at high pressure. Implications for future engine design are discussed. (author)

33 ADVANCED PROPULSION SYSTEMS↗

Oxygen vacancy defect engineering using atomic layer deposited HfAlO{sub x} in multi-layered gate stack

This work evaluates the defects in high quality atomic layer deposited (ALD) HfAlO{sub x} with extremely low Al (<3% Al/(Al + Hf)) incorporation in the Hf based high-k dielectrics. The defect activation energy estimated by the high temperature current voltage measurement shows that the charged oxygen vacancies, V{sup +}/V{sup 2+}, are the primary source of defects in these dielectrics. When Al is added in HfO{sub 2}, the V{sup +} type defects with a defect activation energy of E{sub a} ∼ 0.2 eV modify to V{sup 2+} type to E{sub a} ∼ 0.1 eV with reference to the Si conduction band. When devices were stressed in the gate injection mode for 1000 s, more V{sup +} type defects are generated and E{sub a} reverts back to ∼0.2 eV. Since Al has a less number of valence electrons than do Hf, the change in the co-ordination number due to Al incorporation seems to contribute to the defect level modifications. Additionally, the stress induced leakage current behavior observed at 20 °C and at 125 °C demonstrates that the addition of Al in HfO{sub 2} contributed to suppressed trap generation process. This further supports the defect engineering model as reduced flat-band voltage shifts were observed at 20 °C and at 125 °C.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ferroelectric properties and polarization dynamics in Ba{sub 4}Sm{sub 2}Ti{sub 4}Ta{sub 6}O{sub 30} tungsten bronze ceramics

Ferroelectricity and polarization reversal dynamics in Ba{sub 4}Sm{sub 2}Ti{sub 4}Ta{sub 6}O{sub 30} tungsten bronze ceramics were investigated by measuring dielectric spectra and the evolution of hysteresis loops over a wide temperature range. With decreasing temperature, the dielectric properties and differential scanning calorimetry results showed diffuse peaks at ∼280 K with large thermal hysteresis, suggesting a first order ferroelectric transition. A dielectric relaxation was observed at low temperature that followed the Vogel–Fulcher relationship. The saturation and remanent polarizations of the Ba{sub 4}Sm{sub 2}Ti{sub 4}Ta{sub 6}O{sub 30} ceramics showed remarkable dependence on the applied field and temperature. The temperature dependence of the coercive field was divided into three linear regions and fitted to the Vopsaroiu model. Activation energies for polarization reversal of 0.73, 0.79, and 0.65 eV were determined for the following three regions: (I) the diffuse ferroelectric transition region (323.15–293.15 K), (II) the region just below the ferroelectric transition temperature (293.15–233.15 K), and (III) the low temperature relaxation region (233.15–173.15 K), respectively. The decrease of the activation energy in region III was attributed to the low temperature relaxation of Ba{sub 4}Sm{sub 2}Ti{sub 4}Ta{sub 6}O{sub 30}.

36 MATERIALS SCIENCE↗

Determination of Arrhenius and Thermodynamic Parameters for the Aqueous Reaction of the Hydroxyl Radical with Lactic Acid

Lactic acid is a major component of the TALSPEAK process planned for use in the separation of trivalent lanthanide and actinide elements. This acid acts both as a buffer, and also to protect the actinide complexant from radiolytic damage. However, there is little kinetic information on the reaction of water radiolysis species with lactic acid, particularly under the anticipated process conditions of aerated aqueous solution at pH~3, where oxidizing reactions are expected to dominate. Here we have determined temperature-dependent reaction rate constants for the reactions of the hydroxyl radical with lactic acid and the lactate ion. For lactic acid this rate constant is given by the equation: ln k1 = (23.85 ± 0.19) – (1120 ± 54) / T, corresponding to an activation energy of 9.31 ± 0.45 kJ mol-1 and a room temperature reaction rate constant of (5.24 ± 0.09) x 108 M-1 s-1 (24.0oC). For the lactate ion, the temperature-dependent rate constant is given by: ln k2 = (24.83 ± 0.14) – (1295 ± 42) / T, for an activation energy of 10.76 ± 0.35 kJ mol-1 and a room temperature value of (7.77 ± 0.11) x 108 M-1 s-1 (22.2oC). These kinetic data have been combined with autotitration measurements to determine the temperature-dependent behavior of the lactic acid pKa value, allowing thermodynamic parameters for the acid dissociation to be calculated as ?Hº = -10.75 ± 1.77 kJ mol-1, ?Sº = -103.9 ± 6.0 J K-1 mol-1 and ?Gº = 20.24 ± 2.52 kJ mol-1 at low ionic strength.

99 GENERAL AND MISCELLANEOUS↗