SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Cesium propellant systems utilizing surface tension to position and transfer liquid propellant in zero-g environment studied with high voltage electrical isolation methods
Breadboard model design and construction of test equipment for studying silver zinc battery behavior in zero-g environment of earth orbit
Battery powered electron beam welding under zero-g conditions in orbiting satellite workshop, discussing design concepts
Teflon-packed flexible joint separates the movement of the shaker from the liquid nitrogen hose during the ground testing of cryogenic zero-g equipment. The joint allows the hose to lie on the floor in a stationary position as the shaker moves back and forth, thus, the hose is not subject to violent motion.
Potable water reclamation from human wastes in zero-G environment
Orbital cargo transfer simulation techniques involving zero-g aircraft and water immersion
Liquid He containment in space zero-g environment, proposing use of high thermal conductivity porous plug operating in superfluid regime
Compact, lightweight camera which advances film frames without use of conventional sprockets and slip clutches obtains time lapse photomicrographs of human cell growth in a zero-G environment over a period of about a month.
All astronaut maneuvering unit systems used during the Gemini 9 mission were in an acceptable condition for flight when the evaluation was terminated. Some difficulty was experienced with reception of the voice signal by the command pilot. All of the donning provisions are apparently practical in the orbital environment; however, the donning activities were more difficult to perform than had been experienced in the one-g and zero-g training exercises. Lighting was marginal because of the failure of one adapter floodlight and one penlight. The crewmembers reported a tendency for the extravehicular activity pilot and any loose equipment to move outward from the earth relative to the spacecraft. This tendency affected activities at a work station and maneuvering in an extravehicular environment.
The prototype slide staining system capable of performing both one-component Wright's staining of blood smears and eight-step Gram staining of heat fixed slides of microorganisms is described. Attention was given to liquid containment, waste handling, absence of contamination from previous staining, and stability of the staining reagents. The unit is self-contained, capable of independent operation under one- or zero-g conditions, and compatible with Skylab A.
During the initial stages of the NASA Skylab orbit, the Apollo telescope mount (ATM) is deployed by the deployment assembly (DA) which clears the multiple docking adapter axial docking port. This is an essential prerequisite to docking the command service module with the orbital workshop and subsequent occupancy of the workshop by the Apollo three-man crew. The objectives of the full-scale NASA Skylab ATM deployment test program were (1) to evaluate the design concept of the DA and deployment mechanisms while functioning in a zero-g environment with simulated ATM mass properties and (2) to evaluate the effects of handling, transporting, and deployment with respect to the structural geometry and stability of the DA.
Maintainability must be designed into long-duration spacecraft and equipment to provide the required high probability of mission success with the least cost and weight. The ability to perform repairs quickly and easily in a space environment can be achieved by imposing specific maintainability design criteria on spacecraft equipment design and installation. A study was funded to investigate and define design criteria for electronic equipment that would permit rapid removal and replacement in a space environment. The results of the study are discussed together with subsequent simulated zero-g demonstration tests of a mockup with new concepts for packaging.
Space, in contrast to earth, offers total gravity control and unequaled vacuum, temperature, pressure, and radiation characteristics. In zero-g molecular forces such as cohesion and adhesion become controlling factors even in the largest bulk processes. The absence of relative mass accelerations eliminates the need for support of solid matter. Stability in liquid-solid, liquid-liquid, or liquid-gas mixtures, and the absence of thermal convection is obtained because there is no relative motion in fluids due to differences in density. Applications of these characteristics include liquid-matrix preparation of composites, fine-grain castings, supersaturated alloys, combinations which exhibit liquid-phase immiscibility, the containerless free suspension of materials, surface-tension casting, surface-tension drawing, adhesion casting, and controlled density casting.
The existing work on gravitational effects on electrochemical batteries is summarized, certain conclusions are drawn, and recommendations are made for future activities in this field. The effects of sustained high-G environments on cycle silver-zinc and nickel-cadmium cells have been evaluated over four complete cycles in the region of 10 to 75 G. Although no effects on high current discharge performances or on ampere-hour capacity were noted, severe zinc migration and sloughing of active material from the zinc electrode were observed. This latter effect constitutes real damage, and over a long period of time would result in loss of capacity. It is recommended that a zero-G battery experiment be implemented. Both an orbiting satellite and a sounding rocket approach are being considered.
Parameters that require consideration by the planners and designers when planning for man to perform functions outside the vehicle are presented in terms of the impact the extravehicular crewmen and major EV equipment items have on the mission, vehicle, and payload. Summary data on man's performance capabilities in the weightless space environment are also provided. The performance data are based on orbital and transearth EVA from previous space flight programs and earthbound simulations, such as water immersion and zero-g aircraft.
The candidate definition studies on the zero-g cloud physics laboratory are covered. This laboratory will be an independent self-contained shuttle sortie payload. Several critical technology areas have been identified and studied to assure proper consideration in terms of engineering requirements for the final design. Areas include chambers, gas and particle generators, environmental controls, motion controls, change controls, observational techniques, and composition controls. This unique laboratory will allow studies to be performed without mechanical, aerodynamics, electrical, or other type techniques to support the object under study. This report also covers the candidate experiment definitions, chambers and experiment classes, laboratory concepts and plans, special supporting studies, early flight opportunities and payload planning data for overall shuttle payload requirements assessments.
The design, fabrication, and testing of an automatic bacteria detection system with a zero-g capability and based on the filter-capsule approach is described. This system is intended for monitoring the sterility of regenerated water in a spacecraft. The principle of detection is based on measuring the increase in chemiluminescence produced by the action of bacterial porphyrins (i.e., catalase, cytochromes, etc.) on a luminol-hydrogen peroxide mixture. Since viable as well as nonviable organisms initiate this luminescence, viable organisms are detected by comparing the signal of an incubated water sample with an unincubated control. Higher signals for the former indicate the presence of viable organisms. System features include disposable sealed sterile capsules, each containing a filter membrane, for processing discrete water samples and a tape transport for moving these capsules through a processing sequence which involves sample concentration, nutrient addition, incubation, a 4 Molar Urea wash and reaction with luminol-hydrogen peroxide in front of a photomultiplier tube. Liquids are introduced by means of a syringe needle which pierces a rubber septum contained in the wall of the capsule. Detection thresholds obtained with this unit towards E. coli and S. marcescens assuming a 400 ml water sample are indicated.
Flight tests conducted in December 1973 demonstrated the ability of an unisexual urine collection subsystem to function in a zero-g environment. The urinal, which could be adjusted with three degrees of freedom, accommodated 16 female test subjects with a wide range of stature, as well as five male test subjects. The urinal was in intimate contact with the female and was contoured to form an effective air seal at the periphery. When positioned 2-4 inches forward, the urinal could be used for male collection and contact was not required.