Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “well casing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1998

Sensitivity of Cirrus Simulations in Idealized Situations: The WG2 Test Cases

GCSS Cirrus Cloud Systems Working Group (WG2) is presently conducting a comparison of cirrus cloud models for idealized initial conditions. The experiments involve binary (off/on) tests of model sensitivity to infrared radiative processes, and thermal stratification, and vertical wind shear for situations of weakly forced (3 cm/s uplift) cold (-60 to -70 C) and warm (-35 to -50 C) cirrus clouds. A range of model types are involved including parcel, SCM, 2-D CRM, 3-D CRM and LES models. The test cases will be described and results from 2-dimensional cirrus cloud models with bulk microphysics (implicit second moment scheme) and explicit bin microphysics will be compared. Vertical ice mass flux (particle fall speed) is a critical model component leading to significant intermodel differences. Efforts are ongoing to better quantify this aspect. Future plans of WG2 will also be briefly described and include model comparisons for a well-observed case of cold (ARM IOP) cirrus and of warm (EUCREX) cirrus, as well as, a joint activity with WG4 to consider the treatment of anvil cirrus in a variety of models.

Starr, David OC.↗
NASA NTRSDate not supplied

A Knowledge Graph Framework for Organizing Heterogeneous Datasets for Utilization in Classical and Quantum Computing: Current Challenges and Future Directions

"The escalating impact of climate change induced extreme weather events in urban, suburban, and rural environments demands a rethink of how we have been using the single event-based or use-case-based knowledge graph models. The lack of representation in interaction within environmental variables found in literature led to the development of a novel framework that reflects the true nature of the interconnectedness in our environment. We propose an Environmental Interaction Knowledge Graph (EIKG) framework. This general EIKG framework works as the basis for interconnected environmental events by knitting interrelated events such as hurricanes leading to storm surges, which lead to flood events that could cause mudslides, landslides, etc., The cascading nature of one event leading to another related event in the environment requires an adequate understanding of each event using contextual information before conducting any data-driven analytics. This vision paper showcases how the EIKG:floods, EIKG:wildfire EIKG:landslides, etc, can be derived from a base case framework of EIKG as those individual events are interconnected with some common denominator variables. As an example, the precipitation variable is used in the flood case study as well as in the wildfire case study, as excessive precipitation levels lead to floods, and lack of precipitation leads to droughts and wildfires. We identify the precipitation variable as a “common-denominator-variable” in extreme weather events that play a key role in modeling the environment leading to different extreme weather events based on the variability of that variable (varying values where low precipitation leads to drought, and high values lead to floods). We use the insights gained from EIKG to conduct classical and Quantum Machine Learning (QML) based data analysis on the research questions developed. Our preliminary study shows how the Variational Quantum Classifier (VQC) and Quantum Support Vector Classifier (QSVC) are used along with the classical machine learning models to compare the model accuracies. Our study elaborates on how a quantitative analysis uses state-of-the-art machine learning techniques that include implementing both classical and quantum machine learning models and developing the knowledge graph. The EIKG is used to organize heterogeneous datasets and integrate the relations to case-specific extreme weather events such as floods. The study uses datasets such as county-to-country residential mobility data, socioeconomic datasets from the US Census Bureau, climate and weather-related Earth Observational data from NASA, and critical infrastructure data from the Homeland Infrastructure datasets."

Knowledge Graphs, Quantum Computing, Heterogenous ↗
NASA NTRSDate not supplied

Wall-modeled LES of Flow Over a Gaussian Bump

We perform wall-modeled large eddy simulations (WMLES) of turbulent flow over a Gaussian-shaped bump geometry, to assess its performance in the acceleration and separation regions of the flow. An unstructured finite-volume solver is used along with an equilibrium wall model. The Mach number of the oncoming flow selected for the simulation is 0.176, and two Reynolds numbers (Re) are simulated that are about 10000 and 36000 based on boundary layer thickness upstream of the bump. Spanwise periodic results for the lower Re case are compared with the available DNS data, while the full three-dimensional simulation results for the higher Re case are compared to available experimental data. Sensitivity of WMLES results are assessed for a number of factors including grid resolution, wall model exchange location, type of wall model, and unstructured grid topology. The WMLES results for the lower Re case agree well with available DNS data in terms of the wall pressure variation, velocity and turbulent stress profile comparisons. The skin-friction predictions show a reduced tendency to separate. This appears to be accentuated for the higher Re case, for the medium resolution grid used in this study, where WMLES does not predict any flow separation in the mean, which is in contrast to the large separation bubble observed in the experiments.

turbulence↗
NASA NTRS2024

NASA Engineering and Safety Center Technical Bulletin No. 24-04: 6DOF Check Cases

In 2015, the NESC released benchmark Earth-based check-cases for well specified, rigid-body, six-degree-of-freedom (6DOF) aero/spacecraft models to promote consistent and accurate flight simulations across multiple Agency tools and facilities. Recently, the NESC expanded upon that effort to add Lunar-based check-cases to support new lunar exploration initiatives. This study produced a smaller, focused set of cases that exercise new and unique features of missions in the lunar environment in comparison with 8 high-fidelity NASA simulation tools and provides a measure of validation for simulations supporting Human Landing Systems.

Flight Mechanics↗
NASA NTRS1999

Update of the Development of a Low Cost Data Acquisition System for the Space Shuttle Solid Rocket Booster Program

The space shuttle solid rocket boosters (SRBs) experience a severe environment during their brief flight. During the last few years several SRB's have sustained noticeable structural damage. The environmental characteristics (vibration, structure, and thermal) encountered by the SRB's during ascent, descent and water impact are in most cases unknown. A developmental flight instrumentation (DFI) system collected data from the SRBs' first four flights in the early 1980's, and after the first three flights during the shuttle return-to-flight phase after the Challenger accident. However, the DFI data collected are of low fidelity and do not correlate well with cases of observed structural damage. The DFI system was evaluated for reuse, but the cost to fly it was prohibitive. The space shuttle is presently scheduled to fly until 2030. To support the shuttle flight schedule, avionics on the SRB's will be upgraded. The environments on the different sections of the SRB will need to be defined more completely to properly qualify the avionics for multiple flights. The DFI data previously gathered do not provide enough information to properly qualify the avionics. Marshall Space Flight Center's (MSFC) SRB Project Office requested the Science and Engineering (S&E) Directorate to develop a stand-alone data acquisition system that could collect data from any area of the booster. In answer to this requirement, S&E developed the Enhanced Data Acquisition System (EDAS). To minimize development time and cost, the development team used state-of-the-art commercial off the shelf (COTS) equipment. The first two flights of this system occurred on shuttle mission STS-91 in June 1998 and STS-95 in October 1998. Twenty-one measurements were successfully recorded on the STS-91 right hand booster, providing new accelerometer, strain, temperature, and heating rate data to analysts. Twenty-four measurements were successfully recorded on the STS-95 left hand booster, providing data from the booster and the external tank. This paper summarizes the effort to develop, test, qualify and fly the EDAS to meet SRB flight and data collection requirements.

Crawford, Kevin↗
NASA NTRS1999

Using a Commerical off the Shelf Data Acquisition System for the Space Shuttle Solid Rocket Booster Program

The space shuttle solid rocket boosters (SRBs) experience a severe environment during their brief flight. During the last few years several SRB's have sustained noticeable structural damage. The environmental characteristics (vibration, structure, and thermal) encountered by the SRB's during ascent, descent and water impact are in most cases unknown. A developmental flight instrumentation (DFI) system collected data from the SRBs' first four flights in the early 1980's, and after the first three flights during the shuttle return-to-flight phase after the Challenger accident. However, the DFI data collected are of low fidelity and do not correlate well with cases of observed structural damage. The DFI system was evaluated for reuse, but the cost to fly it was prohibitive. The space shuttle is presently scheduled to fly until 2030. To support the shuttle flight schedule, avionics on the SRB's will be upgraded. The environments on the different sections of the SRB will need to be defined more completely to properly qualify the avionics for multiple flights. The DFI data previously gathered do not provide enough information to properly qualify the avionics. Marshall Space Flight Center's (MSFC) SRB Project Office requested the Science and Engineering (S&E) Directorate to develop a stand-alone data acquisition system that could collect data from any area of the booster. In answer to this requirement, S&E developed the Enhanced Data Acquisition System (EDAS). To minimize development time and cost, the development team used state-of-the-art commercial off the shelf (COTS) equipment. The first two flights of this system occurred on shuttle mission STS-91 in June 1998 and STS-95 in October 1998. Twenty-one measurements were successfully recorded on the STS-91 right hand booster, providing new accelerometer, strain, temperature, and heating rate data to analysts. Twenty-four measurements were successfully recorded on the STS-95 left hand booster, providing data from the booster and the external tank. This paper summarizes the effort to develop, test, qualify and fly the EDAS to meet SRB flight and data collection requirements.

Crawford, Kevin↗
NASA NTRS1999

Multidisciplinary Optimization Branch Experience Using iSIGHT Software

The Multidisciplinary Optimization (MDO) Branch at NASA Langley Research Center is investigating frameworks for supporting multidisciplinary analysis and optimization research. An optimization framework call improve the design process while reducing time and costs. A framework provides software and system services to integrate computational tasks and allows the researcher to concentrate more on the application and less on the programming details. A framework also provides a common working environment and a full range of optimization tools, and so increases the productivity of multidisciplinary research teams. Finally, a framework enables staff members to develop applications for use by disciplinary experts in other organizations. Since the release of version 4.0, the MDO Branch has gained experience with the iSIGHT framework developed by Engineous Software, Inc. This paper describes experiences with four aerospace applications: (1) reusable launch vehicle sizing, (2) aerospike nozzle design, (3) low-noise rotorcraft trajectories, and (4) acoustic liner design. All applications have been successfully tested using the iSIGHT framework, except for the aerospike nozzle problem, which is in progress. Brief overviews of each problem are provided. The problem descriptions include the number and type of disciplinary codes, as well as all estimate of the multidisciplinary analysis execution time. In addition, the optimization methods, objective functions, design variables, and design constraints are described for each problem. Discussions on the experience gained and lessons learned are provided for each problem. These discussions include the advantages and disadvantages of using the iSIGHT framework for each case as well as the ease of use of various advanced features. Potential areas of improvement are identified.

Padula, S. L.↗
NASA NTRS2015

Deriving Earth Science Data Analytics Requirements

Data Analytics applications have made successful strides in the business world where co-analyzing extremely large sets of independent variables have proven profitable. Today, most data analytics tools and techniques, sometimes applicable to Earth science, have targeted the business industry. In fact, the literature is nearly absent of discussion about Earth science data analytics. Earth science data analytics (ESDA) is the process of examining large amounts of data from a variety of sources to uncover hidden patterns, unknown correlations, and other useful information. ESDA is most often applied to data preparation, data reduction, and data analysis. Co-analysis of increasing number and volume of Earth science data has become more prevalent ushered by the plethora of Earth science data sources generated by US programs, international programs, field experiments, ground stations, and citizen scientists.Through work associated with the Earth Science Information Partners (ESIP) Federation, ESDA types have been defined in terms of data analytics end goals. Goals of which are very different than those in business, requiring different tools and techniques. A sampling of use cases have been collected and analyzed in terms of data analytics end goal types, volume, specialized processing, and other attributes. The goal of collecting these use cases is to be able to better understand and specify requirements for data analytics tools and techniques yet to be implemented. This presentation will describe the attributes and preliminary findings of ESDA use cases, as well as provide early analysis of data analytics toolstechniques requirements that would support specific ESDA type goals. Representative existing data analytics toolstechniques relevant to ESDA will also be addressed.

data analytics↗
NASA NTRS2004

Structural Integrity of a Wind Tunnel Balance

The National Aeronautics and Space Administration (NASA) Langley Research Center (LaRC) has been designing strain-gage balances for utilization in wind tunnels since its inception. The utilization of balances span over a wide variety of aerodynamic tests. A force balance is an inherently critically stressed component due to the requirements of measurement sensitivity. Research and analyses are done in order to investigate the structural integrity of the balances as well as developing an understanding of their performance in order to enhance their capability. Maximum loading occurs when all 6 components of the loads are applied simultaneously with their maximum value allowed (limit load). This circumstance normally does not occur in the wind tunnel. However, if it occurs, is the balance capable of handling the loads with an acceptable factor of safety? LaRC Balance 1621 was modeled and meshed in PATRAN for analysis in NASTRAN. For a complete analysis, it is necessary to consider all the load cases as well as use dense mesh near all the edges. Because of computer limitations, it is not possible to have one model with the dense mesh near all edges. In the present study, a dense mesh is limited to the surface corners where the cage and axial sections meet. Four different load combinations are used for the current analysis. Linear analysis is performed for each load case. In the case where the stress value is above linear elastic region, it is necessary to perform nonlinear analysis. It is also important to investigate the variables limiting the structural integrity of the balances. In order to investigate the possibility of modifying the existing balances to enhance the structural integrity, some modifications are done on this balance. The structural integrity of the balance after modification is investigated.

Karkehabadi, R.↗
NASA NTRS2012

The Keck Aperture Masking Experiment: Dust Enshrouded Red Giants

While the importance of dusty asymptotic giant branch (AGB) stars to galactic chemical enrichment is widely recognised, a sophisticated understanding of the dust formation and wind-driving mechanisms has proven elusive due in part to the difficulty in spatially-resolving the dust formation regions themselves. We have observed twenty dust-enshrouded AGB stars as part of the Keck Aperture Masking Experiment, resolving all of them in multiple near-infrared bands between 1.5 m and 3.1 m. We find 45% of the targets to show measurable elongations that, when correcting for the greater distances of the targets, would correspond to significantly asymmetric dust shells on par with the well-known cases of IRC +10216 or CIT 6. Using radiative transfer models, we find the sublimation temperature of Tsub(silicates) = 1130 90K and Tsub(amorphous carbon) = 1170 60 K, both somewhat lower than expected from laboratory measurements and vastly below temperatures inferred from the inner edge of YSO disks. The fact that O-rich and C-rich dust types showed the same sublimation temperature was surprising as well. For the most optically-thick shells ( 2.2 m > 2), the temperature profile of the inner dust shell is observed to change substantially, an effect we suggest could arise when individual dust clumps become optically-thick at the highest mass-loss rates.

Blasius, T. D.↗
NASA NTRS2017

High Ice Water Concentrations in the 19 August 2015 Coastal Mesoconvective System

During August 2015, NASA's DC-8 research aircraft was flown into High Ice Water Content (HIWC) events as part of a three-week campaign to collect airborne radar data and to obtain measurements from microphysical probes. Goals for this flight campaign included improved characterization of HIWC events, especially from an airborne radar perspective. This paper focuses on one of the flight days, in which a coastal mesoscale convective system (MCS) was investigated for HIWC conditions. The system appears to have been maintained by bands of convection flowing in from the Gulf of Mexico. These convective bands were capped by a large cloud canopy, which masks the underlying structure if viewed from an infrared sensing satellite. The DC-8 was equipped with an IsoKinetic Probe that measured ice concentrations of up to 2.3 g m(exp -3) within the cloud canopy of this system. Sustained measurements of ice crystals with concentrations exceeding 1 g m(exp -3) were encountered for up to ten minutes of flight time. Airborne Radar reflectivity factors were found to be weak within these regions of high ice water concentrations, suggesting that Radar detection of HIWC would be a challenging endeavor. This case is then investigated using a three-dimensional numerical cloud model. Profiles of ice water concentrations and radar reflectivity factor demonstrate similar magnitudes and scales between the flight measurements and model simulation. Also discussed are recent modifications to the numerical model's ice-microphysics that are based on measurements during the flight campaign. The numerical model and its updated ice-microphysics are further validated with a simulation of a well-known case of a supercell hailstorm measured during the Cooperative Convective Precipitation Experiment. Differences in HIWC between the continental supercell and the coastal MCS are discussed.

Proctor, Fred H.↗
NASA NTRS1992

Antecedent precipitation index determined from CST estimates of rainfall

This paper deals with an experimental calculation of a satellite-based antecedent precipitation index (API). The index is also derived from daily rain images produced from infrared images using an improved version of GSFC's Convective/Stratiform Technique (CST). API is a measure of soil moisture, and is based on the notion that the amount of moisture in the soil at a given time is related to precipitation at earlier times. Four different CST programs as well as the Geostationary Operational Enviroment Satellite (GOES) Precipitation Index developed by Arkin in 1979 are compared to experimental results, for the Mississippi Valley during the month of July. Rain images are shown for the best CST code and the ARK program. Comparisons are made as to the accuracy and detail of the results for the two codes. This project demonstrates the feasibility of running the CST on a synoptic scale. The Mississippi Valley case is well suited for testing the feasibility of monitoring soil moisture by means of CST. Preliminary comparisons of CST and ARK indicate significant differences in estimates of rain amount and distribution.

Martin, David W.↗
NASA NTRS1991

A two-equation turbulence model for compressible reacting flows

A two-equation turbulence model (k-epsilon) has been modified to model compressible reacting flows. A compressibility correction model based on modeling the dilatational terms in the Reynolds stress equations has been used. Computations are carried out using the Navier-Stokes solver SPARK which includes a finite rate chemistry model for hydrogen-air combustion. Initially, planar compressible mixing layers are simulated. Comparisons of the predictions with available experimental data and the predictions of a compressible Reynolds stress closure indicate that the model is well suited for the study of such flows. The decrease in the growth rate of the mixing layer with increasing convective Mach number is well predicted. The model is then tested on a three-dimensional supersonic flow problem where solid boundaries are present. An axisymmetric nonreacting mixing layer flow involving dissimilar gases is evaluated next using the model and the predictions are compared with available experimental data. Finally, two reacting turbulent flow configurations have been studied and comparison of predictions and experimental data has been done. The comparisons indicate that the model predicts the overall features of the test cases very well.

Narayan, J. R.↗
NASA NTRS2006

Fan Performance From Duct Rake Instrumentation on a 1.294 Pressure Ratio, 725 ft/sec Tip Speed Turbofan Simulator Using Vaned Passage Casing Treatment

A 1.294 pressure ratio, 725 ft/sec tip speed, variable pitch low noise fan was designed and tested in the NASA Glenn 9- by 15-foot Wind Tunnel. The design included a casing treatment that used recirculation to extend the fan stall line and provide an acceptable operating range. Overall aerodynamic experimental results are presented for this low tip speed, low noise fan without casing treatment as well as using several variants of the casing treatment that moved the air extraction and insertion axial locations. Measurements were made to assess effects on performance, operability, and noise. An unusual instability was discovered near the design operating line and is documented in the fan operating range. Measurements were made to compare stall margin improvements as well as measure the performance impact of the casing treatments. Experimental results in the presence of simulated inlet distortion, via screens, are presented for the baseline and recirculation casing treatment configurations. Estimates are made for the quantity of recirculation weight flow based on limited instrumentation in the recirculation system along with discussion of results and conclusions

Fite, E. Brian↗
NASA NTRS1999

The First Year of TRMM and its Connection to a Global Precipitation Measuring System

This presentation will focus primarily on the advances in our understanding of tropical rain systems needed to interpret the TRMM data. Global averages, as well as case studies from TRMM radar (PR), the TRMM Microwave Imager (TMI) and Visible and Infrared Sensor (VIRS) will be presented. Comparisons and contrasts among the different sensors will be drawn. The relationship between excessive cold clouds and lightning will be illustrated. Comparisons between rainfall products show fairly good agreement outside the deep tropics. The deep tropics will be examined in greater detail to highlight differences and possible sources of discrepancies. Results will also be compared to previous rainfall climatologies generated from the SSM/I instrument. Finally, the paper will focus upon the relationship between the estimates made from the TRMM sensor and those made from ground based radars and preliminary conclusions as well as steps being taken to continue improving our understanding will be presented.

Kummerow, Christian↗
NASA NTRS2000

GCSS Idealized Cirrus Model Comparison Project

The GCSS Working Group on Cirrus Cloud Systems (WG2) is conducting a systematic comparison and evaluation of cirrus cloud models. This fundamental activity seeks to support the improvement of models used for climate simulation and numerical weather prediction through assessment and improvement of the "process" models underlying parametric treatments of cirrus cloud processes in large-scale models. The WG2 Idealized Cirrus Model Comparison Project is an initial comparison of cirrus cloud simulations by a variety of cloud models for a series of idealized situations with relatively simple initial conditions and forcing. The models (16) represent the state-of-the-art and include 3-dimensional large eddy simulation (LES) models, two-dimensional cloud resolving models (CRMs), and single column model (SCM) versions of GCMs. The model microphysical components are similarly varied, ranging from single-moment bulk (relative humidity) schemes to fully size-resolved (bin) treatments where ice crystal growth is explicitly calculated. Radiative processes are included in the physics package of each model. The baseline simulations include "warm" and "cold" cirrus cases where cloud top initially occurs at about -47C and -66C, respectively. All simulations are for nighttime conditions (no solar radiation) where the cloud is generated in an ice supersaturated layer, about 1 km in depth, with an ice pseudoadiabatic thermal stratification (neutral). Continuing cloud formation is forced via an imposed diabatic cooling representing a 3 cm/s uplift over a 4-hour time span followed by a 2-hour dissipation stage with no cooling. Variations of these baseline cases include no-radiation and stable-thermal-stratification cases. Preliminary results indicated the great importance of ice crystal fallout in determining even the gross cloud characteristics, such as average vertically-integrated ice water path (IWP). Significant inter-model differences were found. Ice water fall speed is directly related to the shape of the particle size distribution and the habits of the ice crystal population, whether assumed or explicitly calculated. In order to isolate the fall speed effect from that of the associated ice crystal population, simulations were also performed where ice water fall speed was set to the same constant value everywhere in each model. Values of 20 and 60 cm/s were assumed. Current results of the project will be described and implications will be drawn. In particular, this exercise is found to strongly focus the definition of issues resulting in observed inter-model differences and to suggest possible strategies for observational validation of the models. The next step in this project is to perform similar comparisons for well observed case studies with sufficient high quality data to adequately define model initiation and forcing specifications and to support quantitative validation of the results.

Starr, David OC.↗
NASA NTRS1993

Direct simulation of compressible wall-bounded turbulence

When analyzing many turbulent flows, the effects of compressibility can be neglected. Even some relatively high-speed flows, such as boundary layers generated by a supersonic aircraft, produce turbulent statistics that are similar to those found for the incompressible case. There are other situations, however, in which the non-zero divergence of the turbulence leads to behavior that is fundamentally different from that found at constant density. Examples include flows created by internal combustion engines, hypersonic flight, and supersonic combustion. It is with instances such as these that this project is concerned. In particular, we are interested in the effects of compressibility on turbulence near a smooth solid constant temperature surface; our primary objective is an increased physical understanding that can be used to improve turbulence models of wall-bounded compressible flows. With this in mind, we have begun a direct numerical simulation (DNS) study of turbulence in a plane channel. Because all of the relevant spatial and temporal scales are to be resolved, the simulations require no subgrid scale parameterization. The DNS code developed by Buell to study compressible plane Couette flow was modified to solve the compressible Navier-Stokes equations in the plane channel. The channel was chosen over the Couette flow for two reasons: (1) to avoid using the very large streamwise domains needed to adequately capture the large Couette vortical structures; and (2) to make use of previous experience by considering the compressible version of a well established case and isolate finite Mach number effects by comparing to the incompressible channel.

Coleman, Gary N.↗