Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “wave shaping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

A video-aided study of sea spikes in radar backscatter at moderate incidence

Backscatter from a lake was measured at a 37-deg incidence angle using an FM-CW radar operating on X band and C band simultaneously. A limited amount of Ka-band data was also collected at 50 deg incidence. A video camera recorded the activity within the footprint looking upwind and crosswind. The video showed that breaking waves at all look directions and wedge-shaped waves when looking upwind consistently produced spikes in the radar time series. However, 62 percent to 90 percent of the spikes were not attributable to any surface structure visible on the video picture except wave crests. These spikes may be due to specular reflections or micro-scale breaking too small to be seen. Individual contributions to the backscattering coefficient were calculated for unattributed spikes, breaker spikes, and wedge spikes.

Bush, Daniel A.↗

Carbon K-shell photoionization of fixed-in-space C{sub 2}H{sub 4}

Measurements of the photoelectron angular distributions in the body-fixed frame (MFPAD) have been carried out for 290- to 320-eV photons (just above the carbon K-shell ionization threshold) on C{sub 2}H{sub 4} using an approach based on cold-target recoil-ion momentum spectroscopy (COLTRIMS). The results are compared with a theoretical calculation and excellent agreement is found. A direct verification of the 'f-wave shape resonance' is accomplished by obtaining the complex amplitude of the l=3 partial wave, which shows a peak in its absolute value and a relative phase change of {pi} as the energy is scanned across the resonance.

74 ATOMIC AND MOLECULAR PHYSICS↗

Boundary layer transition studies

A small-scale wind tunnel previously used for turbulent boundary layer experiments was modified for two sets of boundary layer transition studies. The first study concerns a laminar separation/turbulent reattachment. The pressure gradient and unit Reynolds number are the same as the fully turbulent flow of Spalart and Watmuff. Without the trip wire, a laminar layer asymptotes to a Falkner & Skan similarity solution in the FPG. Application of the APG causes the layer to separate and a highly turbulent and approximately 2D mean flow reattachment occurs downstream. In an effort to gain some physical insight into the flow processes a small impulsive disturbance was introduced at the C(sub p) minimum. The facility is totally automated and phase-averaged data are measured on a point-by-point basis using unprecedently large grids. The evolution of the disturbance has been tracked all the way into the reattachment region and beyond into the fully turbulent boundary layer. At first, the amplitude decays exponentially with streamwise distance in the APG region, where the layer remains attached, i.e. the layer is viscously stable. After separation, the rate of decay slows, and a point of minimum amplitude is reached where the contours of the wave packet exhibit dispersive characteristics. From this point, exponential growth of the amplitude of the disturbance is observed in the detached shear layer, i.e. the dominant instability mechanism is inviscid. A group of large-scale 3D vortex loops emerges in the vicinity of the reattachment. Remarkably, the second loop retains its identify far downstream in the turbulent boundary layer. The results provide a level of detail usually associated with CFD. Substantial modifications were made to the facility for the second study concerning disturbances generated by Suction Holes for laminar flow Control (LFC). The test section incorporates suction through interchangeable porous test surfaces. Detailed studies have been made using isolated holes in the impervious test plate that used to establish the Blasius base flow. The suction is perturbed harmonically and data are averaged on the basis of the phase of the disturbance, for conditions corresponding to strong suction and without suction. The technique was enhanced by using up to nine multiple probes to reduce the experimental run-time. In both cases, 3D contour surfaces in the vicinity of the hole show highly 3D TS waves which fan out in the spanwise direction forming bow-shaped waves downstream. The case without suction has proved useful for evaluating calculation methods. With suction, the perturbations on the centerline are much stronger and decay less rapidly, while the TS waves in the far field are similar to the case without suction. Downstream, the contour surfaces of the TS waves develop spanwise irregularities which eventually form into clumps. The spanwise clumping is evidence of a secondary instability that could be associated with suction vortices. Designers of porous surfaces use Goldsmith's Criterion to minimize cross-stream interactions. It is shown that partial TS wave cancellation is possible, depending on the hole spacing, disturbance frequency and free-stream velocity. New high-performance Constant Temperature Hot-Wire Anemometers were designed and built, based on a linear system theory analysis that can be extended to arbitrary order. The motivation was to achieve the highest possible frequency reponse while ensuring overall system stability. The performance is equal to or superior to commercially available instruments at about 10% of the cost. Details, such as fabrication drawings and a parts list, have been published to enable the instrument to be construced by others.

Watmuff, Jonathan H.↗

DENSITY WAVES EXCITED BY LOW-MASS PLANETS IN PROTOPLANETARY DISKS. II. HIGH-RESOLUTION SIMULATIONS OF THE NONLINEAR REGIME

We investigate numerically the propagation of density waves excited by a low-mass planet in a protoplanetary disk in the nonlinear regime, using two-dimensional local shearing box simulations with the grid-based code Athena at high spatial resolution (256 grid points per scale height h). The nonlinear evolution results in the wave steepening into a shock, causing damping and angular momentum transfer to the disk. On long timescales this leads to spatial redistribution of the disk density, causing migration feedback and potentially resulting in gap opening. Previous numerical studies concentrated on exploring these secondary phenomena as probes of the nonlinear wave evolution. Here we focus on exploring the evolution of the basic wave properties, such as its density profile evolution, shock formation, and post-shock wave behavior, and provide comparison with analytical theory. The generation of potential vorticity at the shock is computed analytically and is subsequently verified by simulations and used to pinpoint the shock location. We confirm the theoretical relation between the shocking length and the planet mass (including the effect of the equation of state), and the post-shock decay of the angular momentum flux carried by the wave. The post-shock evolution of the wave profile is explored, and we quantitatively confirm its convergence to the theoretically expected N-wave shape. The accuracy of various numerical algorithms used to compute the nonlinear wave evolution is also investigated: we find that higher order spatial reconstruction and high resolution are crucial for capturing the shock formation correctly.

79 ASTRONOMY AND ASTROPHYSICS↗

Resonant d-wave scattering in harmonic waveguides

We observe and analyze d-wave resonant scattering of bosons in tightly confining harmonic waveguides. It is shown that the d-wave resonance emerges in the quasi-1D regime as an imprint of a 3D d-wave shape resonance. A scaling relation for the position of the d-wave resonance is provided. By changing the trap frequency, ultracold scattering can be continuously tuned from s-wave to d-wave resonant behavior. The effect can be utilized for the realization of ultracold atomic gases interacting via higher partial waves and opens a possibility for studying strongly correlated atomic systems beyond s-wave physics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Currents in Florida lightning return strokes.

The transmission line return stroke model is used to derive individual current versus time wave forms from measured electric fields. A total of 98 strokes in 21 flashes at distances less than or equal to 10 km and 63 strokes in 18 flashes at distances between 10 and 32 km are analyzed for current wave shape and magnitude. For the closer strokes, return stroke velocity is also determined from the electric field wave forms. Eighteen detailed current and field wave forms and a statistical distribution of peak currents are presented. Return stroke channel currents are found to exhibit a sharp initial peak which currents measured in tall structures at the base of the lightning channel apparently do not exhibit. A complete discussion of errors is given.

Uman, M. A.↗

CFD Predictions of Sonic-Boom Characteristics for Unmodified and Modified SR-71 Configurations

Shaped sonic-boom signatures refer to signatures that look something other than the typical N-waves. Shaped sonic-boom signatures such as "flat-top," "ramp-type," or "hybrid-type" waveforms have been shown to reduce the subjective loudness without requiring reductions in overpressure peaks. The shaping of sonic-boom signatures requires increasing the shock rise time and changes in frequency spectra. So far, a flat-top waveform was shown to be achievable in wind tunnels; however, the influence of long propagation distance and real atmosphere on shaped signatures should be addressed using flight tests. Two different approaches have been proposed for sonic-boom minimization flight tests. The first approach, proposed by Eagle Aerospace, is for a flight test using a modified BQM-34 "FIREBEE" remotely piloted vehicle. The 30-foot long FIREBEE has a steady state flight condition at the Mach number and altitude of interest, and it can be recovered by helicopter from the water. As an alternative approach, a modified SR-71 vehicle has been proposed by the McDonnell Douglas Corporation. Benefits of the SR-71 include its variable geometry supersonic inlets, small cockpit bulge, higher Mach number capabilities, slender design, and longer length (105 foot). The present investigation addresses the sonic-boom analysis for the second vehicle.The objective of the current investigation is to assess the feasibility of a modified SR-71 configuration, with McDonnell Douglas-designed fuselage modifications, intended to produce shaped sonic-boom signatures on the ground. The present study describes the use of a higher-order computational fluid dynamics (CFD) method to predict the sonic-boom characteristics for both unmodified and modified SR-71 configurations. An Euler unstructured grid methodology is used to predict the near-field, three-dimensional pressure patterns generated by both SR-71 models. The computed near-field pressure signatures are extrapolated to specified distances below the aircraft down to impingement on the ground using the code MDBOOM. Comparisons of the near-field pressure signatures with available flight-test data are presented in the current paper.

Fouladi, Kamran↗

Microstructural evolution during dynamic deformation of cubic metals: copper

Shockwave shape can influence dynamic damage evolution. Features such as rise time, pulse duration, peak shock pressure, pull back, and release rate are influenced as wave shape changes. However, their individual influence on dynamic damage evolution is not well understood. Specifically, changing from a square to triangular or Taylor wave loading profile can alter the release kinetics from peak shock pressure and the volume of material sampled during release. This creates a spatial influence. In high purity metals, because damage is often linked to boundaries within the microstructure (grain or twin), changing the volume of material sampled during release, can have a drastic influence on dynamic damage evolution as the number of boundaries or defects sampled is altered. In this study, model-driven dynamic experiments have been conducted on eu with four different grain sizes to examine, for a given shockwave shape, how the spatial effect of boundary distribution influences dynamic damage evolution. Both two and three dimensional damage characterization techniques have been utilized. This study shows the critical influence of spatial effects, in this case boundary density, on dynamic damage evolution. As the boundary density decreases, the damage evolution transitions from nucleation controlled to growth controlled. It also shows that specific boundaries, those with high Schmid factor orientations on either side, maybe a necessary condition for void formation.

36 MATERIALS SCIENCE↗

Identification of Cyclically Symmetric Resonance in Experimental Data for Engine Failure Analysis

Many structural components are rotationally symmetric. For a perfectly manufactured structure, the modal wave shapes are exactly sinusoidal. These structures can be excited by similarly-shaped forcing functions such as those found frequently in or near turbomachinery. Due to orthogonality, resonance occurs only when the integer wave number of the structure equals the integer wave number of the excitation as well as when the excitation frequency is close to the natural frequency of the mode. This resonance can lead to high-cycle fatigue (HCF) cracking of the structure. To help understand this phenomenon, it is desirable to determine the modal composition of the response and excitation. Once the modal composition is known, either the excitation or the structure can be modified to reduce the response and therefore prevent HCF cracking.

Medley, Steve↗

Analysis of sonic boom data to quantify distortions of shock profiles

Researchers at Penn State have been examining some sonic boom waveforms recorded during overflights by the Air Force which have become available to NASA and its contractors. The quality of the digitized data and the supporting meteorological data was such that one could test the applicability of molecular relaxation theories. In the late sixties, it had been supposed that the finite rise times in the absence of turbulence had neglected the vibrational relaxation of nitrogen molecules. Bass et al. have demonstrated that molecular relaxation definitely gives the correct order of magnitude of the observed rise times. However, the Air Force data in conjunction with the recent steady-state shock profile model theory of Kang and Pierce give the first opportunity to make a detailed quantitative assessment of the molecular relaxation hypothesis. Currently an investigation is ongoing to establish a method of quantifying the distortion of a sonic boom wave from a classic N-wave shape using the Air Force data taken at Edwards AFB in 1987. Using the premise that energy will be conserved approximately for a sonic boom wave both before and after the boom passes through the Earth's turbulent boundary layer, a classic undistorted waveform is constructed from the distorted signature received at the ground. A correlation between the mean-squared deviation of the distorted and undistorted waveforms and the distance the boom travels through the turbulence is sought.

Gionfriddo, Thomas A.↗

Unraveling the Stereodynamics of Cold Controlled HD - H 2 Collisions

Measuring inelastic rates with partial-wave resolution requires temperatures close to a Kelvin or below, even for the lightest molecule. In a recent experiment, Perreault, Mukherjee, and Zare [Nat. Chem. 10, 561 (2018).] studied collisional relaxation of excited HD molecules in the v=1, j=2 state by para- and ortho-H2 at a temperature of about 1 K, extracting the angular distribution of scattered HD in the v=1, j=0 state. By state preparation of the HD molecules, control of the angular distribution of scattered HD was demonstrated. Here, we report a first-principles simulation of that experiment which enables us to attribute the main features of the observed angular distribution to a single L=2 partial-wave shape resonance. Finallly, our results demonstrate important stereodynamical insights that can be gained when numerically exact quantum scattering calculations are combined with experimental results in the few-partial-wave regime.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Numerical simulations of wave propagation in long bars with application to Kolsky bar testing

Material testing using the Kolsky bar, or split Hopkinson bar, technique has proven instrumental to conduct measurements of material behavior at strain rates in the order of 10 3 s -1 . Test design and data reduction, however, remain empirical endeavors based on the experimentalist's experience. Issues such as wave propagation across discontinuities, the effect of the deformation of the bar surfaces in contact with the specimen, the effect of geometric features in tensile specimens (dog-bone shape), wave dispersion in the bars and other particulars are generally treated using simplified models. The work presented here was conducted in Q3 and Q4 of FY14. The objective was to demonstrate the feasibility of numerical simulations of Kolsky bar tests, which was done successfully.

36 MATERIALS SCIENCE↗

Transition from an incommensurate spin density wave to a commensurate magnetic order in a triangular lattice compound Ho 2 PdAl 6 Ge 4

Rare-earth (RE) intermetallics on a triangular lattice are promising candidates for generating interesting magnetic phases due to the complex interplay between Ruderman-Kittel-Kasuya-Yoshida (RKKY) interaction and geometrical frustration. Here, in this work, we report the exotic magnetic structure of a layered compound Ho 2 PdAl 6 Ge 4 with triangular lanthanide nets. Magnetization and heat capacity measurements in zero magnetic field reveal two magnetic phase transitions at T N1 = 10.8 K and T N2 = 6.0 K. Neutron powder diffraction demonstrates a commensurate antiferromagnetic phase with k 1 = (0, 0, 1.5) below T N2 . With increasing temperature, another incommensurate vector appears and therefore, the magnetic structure of the intermediate state is identified as an unusual incommensurate spin density wave with two propagation vectors k 1 = (0, 0, 1.5) and k 2 = (0.0492, 0.0492, 1.5). The magnetic moments in the intermediate state rotate continuously and form an unusual S-shaped wave arrangement in the ab plane, sharing similarities with typical cycloid and helix magnetic orders. These results identify Ho 2 PdAl 6 Ge 4 as a candidate for exploring field-induced topological magnetic phases such as skyrmions, opening the way for further investigations on the family of RE 2 PdAl 6 Ge 4 materials.

36 MATERIALS SCIENCE↗

DIRECT IMAGING OF QUASI-PERIODIC FAST PROPAGATING WAVES OF {approx}2000 km s{sup -1} IN THE LOW SOLAR CORONA BY THE SOLAR DYNAMICS OBSERVATORY ATMOSPHERIC IMAGING ASSEMBLY

Quasi-periodic propagating fast mode magnetosonic waves in the solar corona were difficult to observe in the past due to relatively low instrument cadences. We report here evidence of such waves directly imaged in EUV by the new Atmospheric Imaging Assembly instrument on board the Solar Dynamics Observatory. In the 2010 August 1 C3.2 flare/coronal mass ejection event, we find arc-shaped wave trains of 1%-5% intensity variations (lifetime {approx}200 s) that emanate near the flare kernel and propagate outward up to {approx}400 Mm along a funnel of coronal loops. Sinusoidal fits to a typical wave train indicate a phase velocity of 2200 {+-} 130 km s{sup -1}. Similar waves propagating in opposite directions are observed in closed loops between two flare ribbons. In the k-{omega} diagram of the Fourier wave power, we find a bright ridge that represents the dispersion relation and can be well fitted with a straight line passing through the origin. This k-{omega} ridge shows a broad frequency distribution with power peaks at 5.5, 14.5, and 25.1 mHz. The strongest signal at 5.5 mHz (period 181 s) temporally coincides with quasi-periodic pulsations of the flare, suggesting a common origin. The instantaneous wave energy flux of (0.1-2.6) x 10{sup 7} erg cm{sup -2} s{sup -1} estimated at the coronal base is comparable to the steady-state heating requirement of active region loops.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Simultaneous Observations of p-mode Light Walls and Magnetic Reconnection Ejections above Sunspot Light Bridges

Recent high-resolution observations from the Interface Region Imaging Spectrograph reveal bright wall-shaped structures in active regions (ARs), especially above sunspot light bridges. Their most prominent feature is the bright oscillating front in the 1400/1330 Å channel. These structures are named light walls and are often interpreted to be driven by p-mode waves. Above the light bridge of AR 12222 on 2014 December 06, we observed intermittent ejections superimposed on an oscillating light wall in the 1400 Å passband. At the base location of each ejection, the emission enhancement was detected in the Solar Dynamics Observatory 1600 Å channel. Thus, we suggest that in wall bases (light bridges), in addition to the leaked p-mode waves consistently driving the oscillating light wall, magnetic reconnection could happen intermittently at some locations and eject the heated plasma upward. Similarly, in the second event occurring in AR 12371 on 2015 June 16, a jet was simultaneously detected in addition to the light wall with a wave-shaped bright front above the light bridge. At the footpoint of this jet, lasting brightening was observed, implying magnetic reconnection at the base. We propose that in these events, two mechanisms, p-mode waves and magnetic reconnection, simultaneously play roles in the light bridge, and lead to the distinct kinetic features of the light walls and the ejection-like activities, respectively. To illustrate the two mechanisms and their resulting activities above light bridges, in this study we present a cartoon model.

79 ASTRONOMY AND ASTROPHYSICS↗

Steady state risetimes of shock waves in the atmosphere

A square wave shape is used in the Pestorius algorithm to calculate the risetime of a step shock in the atmosphere. These results agree closely with steady shock calculations. The healing distance of perturbed shocks due to finite wave effects is then investigated for quasi-steady shocks. Perturbed 100 Pa shocks require on the order of 1.0 km travel distance to return to within 10 percent of their steady shock risetime. For 30 Pa shocks, the minimum recovery distance increases to 3.0 km. It is unlikely that finite wave effects can remove the longer risetimes and irregular features introduced into the sonic boom by turbulent scattering in the planetary boundary layer.

Raspet, Richard↗

Persistence Characteristics of Wind-Tunnel Pressure Signatures From Two Similar Models

Pressure signatures generated by two sonic-boom wind-tunnel models and measured at Mach 2 are presented, analyzed, and discussed. The two wind-tunnel models differed in length and span by a factor of fourteen, but were similar in wing-body planform shape. The geometry of the larger model had been low-boom tailored to generate a flat top ground pressure signature, and the nacelles-off pressure signatures from this model became more flattop in shape as the model-probe separation distances increased from 0.94 to 4.4 span lengths. The geometry of the smaller model had not been low-boom tailored, yet its measured pressure signatures had non-N-wave shapes that persisted as model-probe separation distances increased from 26.0 to 104.2 span lengths. Since the overall planforms of the two wind-tunnel models were so similar, it was concluded that the shape-persistence trends in the pressure signatures of the smaller, non-low-boom tailored model would also be present at very large distances in the pressure signatures of the larger, low-boom-tailored model.

Mack, Robert J.↗