Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “wave prediction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Predictability of planetary waves - Interhemispheric differences and the effects of stationary forcing

An attempt is made to determine the way in which errors appear in the ultralong waves of numerical weather prediction models, as well as the means by which such errors may be alleviated. Such efforts to improve the numerical forecasting of planetary waves derive their importance from the fact that energetic large scale phenomena are the basis for prospective improvements in extended range forecasting. A simple, linear, quasi-geostrophic and barotropic model is presently used in real data forecast simulations to explore, in an idealized context, several effects that may clarify discrepancies betweeen predictability theory and the performance of current numerical weather prediction models. Attention is given to the degree to which discrepancies may be accounted for by linear theory.

Roads, J. O.↗
NASA NTRS1986

Predicted and measured strain response of rectangular panels due to acoustic loading

The objective of the research described in this paper is to assess the accuracy of classical linear acceleration/strain prediction theory for flat, rectangular panels excited by low level, acoustic plane waves. Predictions for both aluminum and laminated composite panels were based on the Ritz method using an orthotropic, multi-mode analysis with rotational springs on the boundaries. The measured natural frequencies and critical damping ratio of the panels were empirial inputs to the model. The comparison between measured and predicted acceleration was very good. Although a factor of three bias error was found between measured and predicted strains, the model was good for predicting the trends in the spatial variation in strain across the panel.

Roussos, L. A.↗
DOE OSTI2024

High-Fidelity Numerical Wave Tank Verification & Validation Study: Wave Generation Through Paddle Motion: Preprint

This paper presents a numerical benchmark study of wave propagation due to a paddle motion using different high-fidelity numerical models, which are capable of replicating the nearly actual physical wave tank testing. A full time series of the measured wave generation paddle motion which was used to generate wave propagation in the physical wave tank will be utilized in each of the models contributed by IEA OES Task 10's participants, which includes both computational fluid dynamics (CFD) and smooth hydrodynamic particle (SPH). The high-fidelity simulations of the physical wave testcase will allow for the evaluation of the initial transient effects from wave ramp-up and its evolution in the wave tank over time for two representative regular waves with varying levels of nonlinearity. A couple of interesting metrics like the predicted wave surface elevation at select wave probes, wave period, and phase-shift in time will be assessed to evaluate the relative accuracy of numerical models versus experimental data within specified time intervals. These models will serve as a guide for modelers in the wave energy community and provide a base case to allow further and more detailed numerical modeling of the fixed Kramer Sphere Cases under wave excitation force wave tank testing.

HYDRO ENERGY,TIDAL AND WAVE POWER↗
NASA NTRS1978

General-relativistic astrophysics

The overall relevance of general relativity to astrophysics is considered, and some of the knowledge about the ways in which general relativity should influence astrophysical systems is reviewed. Attention is focused primarily on finite-sized astrophysical systems, such as stars, globular clusters, galactic nuclei, and primordial black holes. Stages in the evolution of such systems and tools for studying the effects of relativistic gravity in these systems are examined. Gravitational-wave astronomy is discussed in detail, with emphasis placed on estimates of the strongest gravitational waves that bathe earth, present obstacles and future prospects for detection of the predicted waves, the theory of small perturbations of relativistic stars and black holes, and the gravitational waves such objects generate. Characteristics of waves produced by black-hole events in general, pregalactic black-hole events, black-hole events in galactic nuclei and quasars, black-hole events in globular clusters, the collapse of normal stars to form black holes or neutron stars, and corequakes in neutron stars are analyzed. The state of the art in gravitational-wave detection and characteristics of various types of detector are described.

Thorne, K. S.↗
NASA NTRS1981

The effects of tropical wind data on the prediction of ultralong waves

The influence of tropical wind data on the prediction of planetary waves were studied. Two assimilation experiments were performed, one with and one without FGGE tropical winds. The planetary wave error was then analyzed in 72 h forecasts from the initial conditions provided by the two assimilations.

Baker, W. E.↗
NASA NTRS1987

Measuring ocean waves from space; Proceedings of the Symposium, Johns Hopkins University, Laurel, MD, Apr. 15-17, 1986

Papers are presented on ocean-wave prediction; the quasi-universal form of the spectra of wind-generated gravity waves at different stages of their development; the limitations of the spectral measurements and observations of the group structure of surface waves; the effect of swell on the growth of wind wave; operational wave forecasting; ocean-wave models, and seakeeping using directional wave spectra. Consideration is given to microwave measurements of the ocean-wave directional spectra; SIR research; estimating wave energy spectra from SAR imagery, with the radar ocean-wave spectrometer, and SIR-B; the wave-measurement capabilities of the surface contour radar and the airborne oceanographic lidar; and SIR-B ocean-wave enhancement with fast-Fourier transform techniques. Topics discussed include wave-current interaction; the design and applicability of Spectrasat; the need for a global wave monitoring system; the age and source of ocean swell observed in Hurricane Josephine; and the use of satellite technology for insulin treatment.

Beal, Robert C.↗
DOE OSTI2020

Wave Tank Testing Report for Controls Validation of a Heaving Point Absorber

The core objectives of this project is to improve the power capture of three different wave energy conversion (WEC) devices by more than 50% using an advanced control system and validate the attained improvements using wave tank and full scale testing. In parallel, we will bring along the development of a wave prediction system that is required to enable effective control and test it at full scale. The purposes of this report are to: 1. Plan and document the 1/25th scale device testing at the wave-tank facility; 2. Document the test article, setup and methodology, sensor and instrumentation, mooring, electronics, wiring, and data flow and quality assurance; 3. Communicate the testing results between the associated members; 4. Facilitate reviews that will help to ensure all aspects (risk, safety, testing procedures, etc.); 5. Provide a systematic guide to setting up, executing and decommissioning the experiment.

16 TIDAL AND WAVE POWER↗
NASA NTRS1983

Potential impact of remote sensing data on sea-state analysis and prediction

The severe North Atlantic storm which damaged the ocean liner Queen Elizabeth 2 (QE2) was studied to assess the impact of remotely sensed marine surface wind data obtained by SEASAT-A, on sea state specifications and forecasts. Alternate representations of the surface wind field in the QE2 storm were produced from the SEASAT enhanced data base, and from operational analyses based upon conventional data. The wind fields were used to drive a high resolution spectral ocean surface wave prediction model. Results show that sea state analyses would have been vastly improved during the period of storm formation and explosive development had remote sensing wind data been available in real time. A modest improvement in operational 12 to 24 hour wave forecasts would have followed automatically from the improved initial state specification made possible by the remote sensing data in both numerical and sea state prediction models. Significantly improved 24 to 48 hour wave forecasts require in addition to remote sensing data, refinement in the numerical and physical aspects of weather prediction models.

Cardone, V. J.↗
NASA NTRS2003

Simultaneous Ocean Wave Measurements by the Jason and Topex Satellites, With Buoy and Model Comparisons

The verification phase of the Jason-1 satellite altimeter mission presents a unique opportunity for comparing near-simultaneous, independent satellite measurements. We here examine simultaneous significant wave height measurements by the Jason-1 and Topex/Poseidon altimeters. These data are also compared with in-situ measurements from deep-ocean buoys and with predicted wave heights from the Wave Watch 111 operational model. The rms difference between Jason and Topex wave heights is 21 cm, and this can be further lowered by application of median filters to reduce high-frequency noise. This noise is slightly larger in the Jason dataset, amounting to about 7 cm rms for frequencies above 0.05 Hz, which is the frequency at which the coherence between Topex and Jason measurements drops to zero. The probability density function for Jason shows a dearth of small waves relative to Topex. Buoy comparisons confirm that this problem lies with the Jason measurements. The buoy comparisons confirm previous reports that Topex wave heights are roughly 5% smaller than buoy measurements for waves between 2 and 5m; Jason heights in general are 2.7% smaller than Topex. Spurious dips in the Topex density function for 3- and 6-meter waves, a problem that has existed since the beginning of the mission, can be solved by waveform retracking..

Ray, Richard D.↗
NASA NTRS2003

Simultaneous Ocean Wave Measurements by the JASON and TOPEX Satellites, With Buoy and Model Comparisons

The verification phase of the Jason-1 satellite altimeter mission presents a unique opportunity for comparing near-simultaneous, independent satellite measurements. We here examine simultaneous significant wave height measurements by the Jason-1 and Topex/Poseidon altimeters. These data are also compared with in-situ measurements from deep-ocean buoys and with predicted wave heights from the WaveWatch 111 operational model. The rms difference between Jason and Topex wave heights is 28 cm, and this can be lowered by half through improved outlier editing and filtering of high-frequency noise. Noise is slightly larger in the Jason dataset, exceeding Topex by about 7 cm rms at frequencies above 0.05 Hz, which is the frequency at which the coherence between Topex and Jason measurements drops to zero. Jason wave heights are more prone to outliers, especially during periods of moderate to high backscatter. Buoy comparisons confirm previous reports that Topex wave heights are roughly 5% smaller than buoy measurements for waves between 2 and 5m; Jason heights in general are 3% smaller than Topex. Spurious dips in the Topex density function for 3- and 6-meter waves, a problem that has existed since the beginning of the mission, can be solved by waveform retracking.

Ray, R. D.↗
NASA NTRS2018

Implementation of the University of Miami Wave Model (UMWM) into the NASA/GMAO Goddard Earth Observing System Model (GEOS)

Wind generated waves are integral element in air-sea interactions and affect exchange of momentum, heat, water, gases and production of marine aerosol. Motivated by the need to resolve the air-sea interface we have implemented the University of Miami Wave model (UMWM) into the NASA/GMAO Goddard Earth Observing System Model (GEOS). The implementation of the wave model in GEOS aimed to facilitate coupling with the atmosphere and ocean model components with minimal changes to the existing system, while at the same time ensure correctness of the predicted wave energy spectrum and wave diagnostics. Here we describe the implementation of the GEOS/UMWM system and show results from model experiments and verifications. This work is a step toward development of a coupled atmosphere-wave-ocean GEOS system.

Darmenov, Anton↗
NASA NTRS2022

Interaction of a Tunnel-like Acoustic Disturbance Field with a Blunt Cone Boundary Layer at Mach 8

The existing measurements of laminar-to-turbulent transition over circular cones in conventional (i.e., “noisy”) hypersonic wind tunnels have established that the transition location moves downstream when the nose radius is increased from zero. However, this initially downstream movement slows down and ultimately reverses beyond a critical value of the nose radius, and may be related to external forcing in the form of freestream disturbances and/or surface roughness. To understand the effects of freestream acoustic disturbances on transition reversal over a blunt body, hypersonic boundary-layer receptivity to broadband freestream acoustic disturbances from the nozzle wall of a digital conventional wind tunnel is investigated by both direct numerical simulations (DNS) and modal and nonmodal stability analysis. A Mach 8 flow over a 7 deg half-angle cone with a nose radius of 𝑅 𝑛 = 5.2mm and freestream Reynolds number of 12.2 × 10 6 m -1 is considered. The results show that the broadband tunnel noise in the free stream of a convectional hypersonic wind tunnel (i.e., outside of the nozzle-wall turbulent boundary layer) can be well represented by an acoustic model with an ansatz of slow acoustic waves. With successful calibration of the model parameters against the precursor tunnel DNS, such an acoustic ansatz can successfully reproduce both the frequency-wavenumber spectra and the temporal evolution of the broadband tunnel noise radiated from the nozzle wall. Additionally, the DNS of the Mach 8 blunt cone with tunnel-like acoustic input above the bow shock showed that the spectra of wall-pressure and heat-transfer fluctuations recovers the signature of the axisymmetric waves predicted by the nonmodal analysis. Furthermore, the azimuthal wavenumber and frequency spectrum of the temperature fluctuations as a function of the wall-normal distance show higher amplitudes for three-dimensional waves above the boundary-layer edge. The numerical schlieren contours show the inclined structures commonly observed in blunt cone experiments, demonstrating that they correspond to three-dimensional structures due to freestream disturbances in the presence of an entropy layer.

Boundary-layer transition↗
NASA NTRS2022

Interaction of a Tunnel-like Acoustic Disturbance Field with a Blunt Cone Boundary Layer at Mach 8

The existing measurements of laminar-to-turbulent transition over circular cones in conventional (i.e., “noisy”) hypersonic wind tunnels have established that the transition location moves downstream when the nose radius is increased from zero. However, this initially downstream movement slows down and ultimately reverses beyond a critical value of the nose radius, and may be related to external forcing in the form of freestream disturbances and/or surface roughness. To understand the effects of freestream acoustic disturbances on transition reversal over a blunt body, hypersonic boundary-layer receptivity to broadband freestream acoustic disturbances from the nozzle wall of a digital conventional wind tunnel is investigated by both direct numerical simulations (DNS) and modal and nonmodal stability analysis. A Mach 8 flow over a 7 deg half-angle cone with a nose radius of 𝑅 𝑛 = 5.2mm and freestream Reynolds number of 12.2 × 10 6 m -1 is considered. The results show that the broadband tunnel noise in the free stream of a convectional hypersonic wind tunnel (i.e., outside of the nozzle-wall turbulent boundary layer) can be well represented by an acoustic model with an ansatz of slow acoustic waves. With successful calibration of the model parameters against the precursor tunnel DNS, such an acoustic ansatz can successfully reproduce both the frequency-wavenumber spectra and the temporal evolution of the broadband tunnel noise radiated from the nozzle wall. Additionally, the DNS of the Mach 8 blunt cone with tunnel-like acoustic input above the bow shock showed that the spectra of wall-pressure and heat-transfer fluctuations recovers the signature of the axisymmetric waves predicted by the nonmodal analysis. Furthermore, the azimuthal wavenumber and frequency spectrum of the temperature fluctuations as a function of the wall-normal distance show higher amplitudes for three-dimensional waves above the boundary-layer edge. The numerical schlieren contours show the inclined structures commonly observed in blunt cone experiments, demonstrating that they correspond to three-dimensional structures due to freestream disturbances in the presence of an entropy layer.

Boundary layer transition↗
NASA NTRS1986

Electric and magnetic observations of the structure of standing waves in the magnetosphere

Electric and magnetic field instruments on the DE 1 spacecraft provided observations of toroidal standing wave oscillations of magnetic shells in 1981 and 1982. The amplitude and nodal structure of these waves, as a function of increasing magnetic latitude, was studied and compared with model calculations of these waves. Eight pulsation events were selected for study. The pulsations in these events ranged in period from 20 to 300 s. They were observed at L values between 2.8 and 9.7 and at magnetic latitudes from the equator to 48 deg. The duration of these pulsation events was 20 to 30 min, and they usually consisted of a 5- to 10-min growth in amplitude, a 5- to 10-min interval of fluctuating amplitude, and a 5- to 20-min interval of decreasing amplitude. The relative E and B amplitudes and the phase relations between the E and B waves could be qualitatively explained by the nodal structure of the waves predicted by model calculations. Detailed quantitative comparisons of E and B amplitudes were in agreement with more recent model calculations. In a few cases, electron densities were also available as derived from plasma frequency observations; in these cases the standing wave periods calculated were reasonably close to, but somewhat less than, the observed periods.

Cahill, L. J., Jr.↗
NASA NTRS1994

More Consequences of the Collision of a Comet and Jupiter

The impending collision of P/Shoemaker-Levy 9 with Jupiter has excited a wide spectrum of large amplitude predictions. Although the prediction waves themselves have been easily detected propagating through diverse media here on Earth, their future manifestation at Jupiter may prove mostly undetectable. In this talk we may or may not attempt to explain what may or may not have been observed. We will doubtless emphasize our most successful predictions, if any.

Zahnle, Kevin↗
DOE OSTI2021

A statistical study of three-second foreshock ULF waves observed by the Magnetospheric Multiscale mission

We perform a statistical study of 3-s ultra-low frequency (ULF) waves using Magnetospheric Multiscale observations in the Earth's foreshock region. The average phase velocity in the plasma rest frame is determined to be anti-sunward, and the intrinsic polarization is right-handed. We further examine the linear instability conditions based on the drift-bi-Maxwellian distribution functions according to the observed plasma conditions. The resulting instability is a solution to the common dispersion equation of the ion/ion right-hand non-resonant and left-hand resonant instabilities. The predicted wave propagation is also predominantly anti-sunward. The cyclotron resonant conditions of the solar wind and backstreaming beam ions are evaluated, and we find that, in some cases, the anti-sunward propagating waves can be resonant with beam ions, which was overlooked in previous studies. The study suggests that the dispersion equation provides the 3-s ULF waves a fundamental explanation that unifies a rich variety of resonant conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1980

Fluid dynamics of the unsteady two phase processes leading to DDT in granular solid propellants

Deflagration to Detonation (DDT) was predicted to occur in porous beds of high-energy solid propellants by solving the unsteady fluid mechanical convective heat transfer from hot gas products, obtained from the rapid burning at high pressures, provides the impetus to develop a narrow combustion zone and a resulting strong shock. A parametric study clearly indicates that DDT occurs only when a combination of the solids loading fraction, the burning rate constants, the propellant chemical energy, and the particle size provide for critical energy and gas release to support a detonation wave. Predictions for the run-up length to detonation as a function of these parameters are presented.

Krier, H.↗