Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “water table depth”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

48 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Wilson Corners SWMU 001 2015 Annual Long Term Monitoring Report Kennedy Space Center, Florida

This document presents the findings of the 2015 Long Term Monitoring (LTM) that was completed at the Wilson Corners site, located at the National Aeronautics and Space Administration John F. Kennedy Space Center, Florida. The objectives of the 2015 LTM event were to evaluate the groundwater flow direction and gradient, to monitor the vertical and horizontal extent of the volatile organic compounds (VOCs; including the upgradient and sidegradient extents, which are monitored every five years), and to monitor select locations internal to the dissolved groundwater plume. The 2015 LTM event included several upgradient and sidegradient monitoring wells that are not sampled annually to verify the extent of VOCs in this portion of the site. The December 2015 LTM groundwater sampling event included, depth to groundwater measurements, 40 VOC samples collected using passive diffusion bags, and one VOC sample collected using low-flow techniques. Additionally, monitoring well MW0052DD was overdrilled and abandoned using rotasonic drilling techniques. The following conclusions can be made based on the 2015 LTM results: groundwater flow is generally to the west with northwest and southwest flow components from the water table to approximately 55 feet below land surface (ft BLS); peripheral monitoring wells generally delineate VOCs to groundwater cleanup target levels (GCTLs) except for monitoring wells MW0088, MW0090, MW0095, and NPSHMW0039, which had vinyl chloride (VC) concentrations near the GCTL and MW0062, which had trichloroethene (TCE), cis-1,2-dichloroethenen (cDCE), and VC concentrations above natural attenuation default concentrations (NADCs); VOCs in interior downgradient wells generally fluctuate within historic ranges except for monitoring wells in the north-northwest portion of the site, which have increasing VC concentrations indicating potential plume migration and expansion; Historically, the vertical extents of the VOCs were delineated by monitoring wells screened greater than 60 ft BLS (MW0083 through MW0086, and MW0078). The 2015 LTM results indicate that concentrations of daughter product cDCE is greater than the NADC in MW0078 and that cDCE and VC are greater than NADCs in MW0130. TCE was greater than the GCTL in monitoring well MW130 and not detected above method detection limits (9 micrograms per Liter) in monitoring well MW0078. No GCTL exceedances were identified in monitoring wells MW0083 or MW0086; the dissolved plume footprint appears generally stable, though not fully delineated by monitoring well data in the northeast portion of the site; and 2015 LTM results generally support the existing Conceptual Site Model. Geosyntec recommends modifying the LTM program, collecting a verification sample from monitoring well MW0062, and performing a direct push technology instigation in the northnortheastern portion of the site. A cluster of monitoring wells (MW0132 [2 to 12 ft BLS], MW0133 [15 to 25 ft BLS], and MW0134 [29 to 34 ft BLS]) is proposed to delineate impacts in the northnortheast portion of the site. Geosyntec recommends installation of a vertical extent well in the center of the site (Hot Spot 2 area) post-remediation implementation.

groundwater↗
NASA NTRS2012

Use of Fluka to Create Dose Calculations

Monte Carlo codes provide an effective means of modeling three dimensional radiation transport; however, their use is both time- and resource-intensive. The creation of a lookup table or parameterization from Monte Carlo simulation allows users to perform calculations with Monte Carlo results without replicating lengthy calculations. FLUKA Monte Carlo transport code was used to develop lookup tables and parameterizations for data resulting from the penetration of layers of aluminum, polyethylene, and water with areal densities ranging from 0 to 100 g/cm^2. Heavy charged ion radiation including ions from Z=1 to Z=26 and from 0.1 to 10 GeV/nucleon were simulated. Dose, dose equivalent, and fluence as a function of particle identity, energy, and scattering angle were examined at various depths. Calculations were compared against well-known results and against the results of other deterministic and Monte Carlo codes. Results will be presented.

Lee, Kerry T.↗
NASA NTRS2018

Observing Ice Sublimation From Water-Doped Lunar Simulant at Cryogenic Temperatures

NASA's Resource Prospector (RP) mission is intended to characterize the three-dimensional nature of volatiles in lunar polar and permanently shadowed regions. The Near-Infrared Volatile Spectrometer System (NIRVSS) observes while a drill penetrates to a maximum depth of 1 m. Any 10 cm increment of soil identified as containing water ice can be delivered to a heating crucible with the evolved gas delivered to a gas chromatograph / mass spectrometer. NIRVSS consists of two components; a spectrometer box (SB) and bracket assembly (BA), connected by two fiber optic cables. The SB contains separate short- and long-wavelength spectrometers, SW and LW respectively, that collectively span the 1600-3400 nm range. The BA contains an IR emitter (lamp), drill observation camera (DOC, 2048 x 2048 CMOS detector), 8 different wavelength LEDs, and a longwave calibration sensor (LCS) measuring the surface emissivity at four IR wavelengths. Tests of various RP sub-systems have been under-taken in a large cryo-vacuum chamber at Glenn Re-search Center. The chamber accommodates a tube (1.2 m high x 25.4 cm diameter) filled with lunar simulant, NU-LHT-3M, prepared with known abundances of water. Thermocouples are embedded at different depths, and also across the surface of the soil tube. In the chamber the tube is cooled with LN2 as the pressure is reduced to approx. 5-6x10(exp -6) Torr. For the May 2016 tests two soil tubes were prepared with initially 2.5 Wt.% water. The shroud surrounding the soil tube was held at different temperatures for each tube to simulate a warm and cold lunar environment. Table 1 provides a summary of experimental conditions and Figure 1 shows the nominal view of the NIRVSS components, the drill foot, and the top of the soil tube. Once the average soil temperature reached approx. 178 K, drilling commenced. During drilling activities NIRVSS was alternating between obtaining spectra and obtaining images. Here we discuss NIRVSS spectral data obtained during controlled drill percussions.

Roush, T. L.↗
NASA NTRS2003

Small Scale Polygons and the History of Ground Ice on Mars

Recent progress on polygon modeling has focused on the diameter and surface relief that we expect of thermal-contraction polygons in martian permafrost. With this in mind, we developed a finite-element model of thermal-contraction-crack behavior in permafrost in a martian climate. This model was generated from a finite element code by Jay Melosh (called TECTON) originally developed for terrestrial and planetary crustal-deformation studies. We adapted this model to martian permafrost by including time (and temperature) dependent rheologies, boundary conditions, and isotropic thermal-contraction, as well as several small adaptations to a martian environment. We tested our model extensively, including comparison to an analytic solution of pre-fracture stress. We recently published an analysis of two potential sources of water for forming the recent gullies. In this work we first evaluated the potential for near-surface ground ice (in the top meter or so of soil) to melt under conditions of solar heating on sloped surfaces at high obliquity, utilizing both thermal and diffusion-based ground-ice-stability models; our results suggested that the ground ice will sublimate, and the ice table will recede to greater depths before the melting temperature can be reached. An exception can occur only for extremely salt-rich ice, depressing the freezing point.

Mellon, Michael T.↗
NASA NTRS2020

Improved Groundwater Table and L-Band Brightness Temperature Estimates for Northern Hemisphere Peatlands Using New Model Physics and SMOS Observations in a Global Data Assimilation Framework

There is an urgent need to include northern peatland hydrology in global Earth system models to better understand land-atmosphere interactions and sensitivities of peatland functions to climate change, and, ultimately, to improve climate change predictions. In this study, we introduced for the first time peatland-specific model physics into an assimilation scheme for L-band brightness temperature (Tb) data from the Soil Moisture Ocean Salinity (SMOS) mission to improve groundwater table estimates. We conducted two sets of model-only and data assimilation experiments using the Catchment Land Surface Model (CLSM), applying (over peatlands only) in one of them a peatland-specific adaptation (PEATCLSM). The evaluation against in-situ measurements of peatland groundwater table depth indicates the superiority of PEATCLSM model physics and additionally improved performance after assimilating SMOS Tb observations. The better performance of PEATCLSM over nearly all Northern Hemisphere peatlands is further supported by the better agreement between SMOS Tb observations and Tb estimates from the model-only and data assimilation runs. Within the data assimilation scheme, PEATCLSM reduces Tb observation-minus-forecast residuals and leads to reduced data assimilation updates of water storage components and, thus, reduced water budget imbalances in the assimilation system.

SMOS↗
NASA NTRS1973

Identification of soil associations in western South Dakota on ERTS-1 imagery

Soil association maps show the spatial relationships of land units having characteristic soil depths and textures, available water capacities, permeabilities, pH characteristics, plasticity indices, liquid limits, and the like, from which broad interpretations can be made such as how the soil is suited as a source for top soil, and as a source for sand and gravel, and how corrosive the soil is for steel and concrete, and what crop and grass yields can be expected. Film color composites of bands 4, 5 and 7 viewed over a light table with magnification show the soil associations of western South Dakota that are now recognized, and, in addition, several new soil association areas have been brought to light.

Westin, F. C.↗
NASA NTRS2008

The Impact of Aerosols on Cloud and Precipitation Processes: Cloud-Resolving Model Simulations

Aerosols and especially their effect on clouds are one of the key components of the climate system and the hydrological cycle [Ramanathan et al., 2001]. Yet, the aerosol effect on clouds remains largely unknown and the processes involved not well understood. A recent report published by the National Academy of Science states "The greatest uncertainty about the aerosol climate forcing - indeed, the largest of all the uncertainties about global climate forcing - is probably the indirect effect of aerosols on clouds [NRC, 2001]." The aerosol effect on clouds is often categorized into the traditional "first indirect (i.e., Twomey)" effect on the cloud droplet sizes for a constant liquid water path [Twomey, 1977] and the "semi-direct" effect on cloud coverage [e.g., Ackerman et al ., 2001]." Enhanced aerosol concentrations can also suppress warm rain processes by producing a narrow droplet spectrum that inhibits collision and coalescence processes [e.g., Squires and Twomey, 1961; Warner and Twomey, 1967; Warner, 1968; Rosenfeld, 19991. The aerosol effect on precipitation processes, also known as the second type of aerosol indirect effect [Albrecht, 1989], is even more complex, especially for mixed-phase convective clouds. Table 1 summarizes the key observational studies identifying the microphysical properties, cloud characteristics, thermodynamics and dynamics associated with cloud systems from high-aerosol continental environments. For example, atmospheric aerosol concentrations can influence cloud droplet size distributions, warm-rain process, cold-rain process, cloud-top height, the depth of the mixed phase region, and occurrence of lightning. In addition, high aerosol concentrations in urban environments could affect precipitation variability by providing an enhanced source of cloud condensation nuclei (CCN). Hypotheses have been developed to explain the effect of urban regions on convection and precipitation [van den Heever and Cotton, 2007 and Shepherd, 2005]. Please see Tao et al. (2007) for more detailed description on aerosol impact on precipitation. Recently, a detailed spectral-bin microphysical scheme was implemented into the Goddard Cumulus Ensemble (GCE) model. Atmospheric aerosols are also described using number density size-distribution functions. A spectral-bin microphysical model is very expensive from a computational point of view and has only been implemented into the 2D version of the GCE at the present time. The model is tested by studying the evolution of deep tropical clouds in the west Pacific warm pool region and summertime convection over a mid-latitude continent with different concentrations of CCN: a low "clean" concentration and a high "dirty" concentration. The impact of atmospheric aerosol concentration on cloud and precipitation will be investigated.

Tao, Wei-Kuo↗
NASA NTRS1989

The fragmentation of 670A MeV neon-20 as a function of depth in water. I. Experiment

We present the final analysis of an experiment to study the interaction of a beam of 670A MeV neon ions incident on a water column set to different thicknesses. The atomic number Z (and, in some cases, the isotopic mass A) of primary beam particles and of the products of nuclear interactions emerging from the water column close to the central axis of the beam was obtained for nuclei between Be (Z = 4) and Ne (Z = 10) using a time-of-flight telescope to measure the velocity and a set of silicon detectors to measure the energy loss of each particle. The fluence of particles of a given charge was obtained and normalized to the incident beam intensity. Corrections were made for accidental coincidences between multiple particles triggering the TOF telescope and for interactions in the detector. The background due to beam particles interacting in beam line elements upstream of the detector was calculated. Sources of experimental artifacts and background in particle identification experiments designed to characterize heavy ion beams for radiobiological research are summarized, and some of the difficulties inherent in this work are discussed. Complete tables of absolutely normalized fluence spectra as a function of LET are included for reference purposes.

NASA Discipline Radiation Health↗
NASA NTRSDate not supplied

Validation of Remotely Sensed and Modeled Soil Moisture at Forested and Unforested Sites

Soil moisture is an important driver for forest ecosystems, influencing fire occurrence and extent, insect and pathogen impacts, and tree growth, which creates a need for regular, globally extensive soil moisture information that only satellite-based sensors or models can achieve. However, the reliability of soil moisture measurements in forests is not well understood due to a lack of suitable validation sites (especially relative to unforested ecosystems) and interference caused by high vegetation water content on remotely sensed measurements; although recent studies have started to address this gap [1], [2], [3], [4]. Here we validate the performance of multiyear remotely sensed (SMAP/Sentinel), remotely sensed data assimilation modelled (SMAP-L4), and modelled (NLDAS) surface and root zone (0-1 m) soil moisture datasets with data from in-situ sensors at 39 National Ecological Observatory Network (NEON) sites throughout the contiguous US. Due to differences in spatial resolution, NEON soil moisture (~0.2 km measurement zone) correlations were expected to be stronger with the SMAP/Sentinel product (3 km resolution) than with coarser resolution SMAP-L4 (9 km resolution) or NLDAS products (13 km resolution). However, given the sensitivity of satellite measurements to vegetation water content we expected a deterioration in the correlations based on remotely sensed measurements (SMAP/Sentinel and SMAP-L4) as aboveground biomass increased, whereas the model-based data (NLDAS) was expected to be largely insensitive to vegetation type. We recognize that the SMAP/Sentinel product was developed for unforested regions, therefore our application is outside its primary use case. Soil moisture is measured at up to 8 depths in five soil plots spaced up to 40 m apart at each NEON terrestrial site. Correlation parameters were calculated for the three remotely sensed and modelled data products relative to in-situ measurement following Entekhabi et al. [5]. The datasets comprised 94 (SMAP-L4), 28 (SMAP/Sentinel), and 106 (NLDAS) sites-years for surface soils and 13 (SMAP-L4) and 14 (NLDAS) site-years for the root zone. At unforested sites, the performance of the three remotely sensed and modelled data products was similar for surface soils (Table 1). For example, unbiased RMSD (ubRMSD), which SMAP uses as its primary performance metric [6], ranged from 0.05 to 0.06 m3 m-3 (Table 1), indicating the ability of all three products to track changes in soil moisture over time. The performance of the three products deteriorated at forested sites, however, while the difference in performance was modest for SMAP-L4 and NLDAS, the deterioration in SMAP/Sentinel performance was substantial. For instance, SMAP/Sentinel ubRMSD increased from 0.06 to 0.11 m3 m-3 and absolute mean difference (Abs MD; which includes measurement bias and spatial representativeness errors) increased from 0.06 to 0.16 m3 m-3, indicating both a reduction in ability to track temporal changes and absolute amounts of soil moisture in forest ecosystems. SMAP-L4 and NLDAS had lower unbiased RMSD for root zone (0-1 m) than surface soils at both forested and unforested sites (Tables 1 and 2; SMAP/Sentinel does not produce a root zone measurement). However, in most cases the correlation coefficient (r) was lower for the root zone than surface soils, suggesting the lower unbiased RMSD may be attributed to greater temporal stability of soil moisture in the root zone rather than improved data product performance. Mean difference and absolute mean difference, which encompass measurement bias and spatial representativeness errors, were greater for root zone than surface soils at unforested sites for both data products, but the opposite was generally true at forested sites. As with surface soils, there was relatively little change in the performance of SMAP-L4 and NLDAS between the unforested and forested sites. In summary, all three data products were able to adequately represent soil moisture at unforested sites, at least when aggregating across sites. However, while the performance of all three products deteriorated at forested sites, SMAP-L4 and NLDAS maintained sufficient performance to remain suitable for some use cases (ubRMSD <0.06 m3 m-3 and RMSD <0.13 m3 m-3). In contrast, the relatively poorer performance of the SMAP/Sentinel product at forested sites seems insufficient for most use cases (ubRMSD >0.1 m3 m-3 and RMSD >0.2 m3 m-3). We attribute the large reduction in the performance of the SMAP/Sentinel product in forests to its use of C-band wavelengths, which are particularly sensitive to vegetation interference, and apparently outweighed any gains provided by its higher spatial resolution. A combined SMAP/NISAR soil moisture product may provide improved performance relative to SMAP/Sentinel due to NISAR’s use of L-band wavelengths, which are less sensitive to vegetation (NISAR is scheduled for launch in early 2024).

Edward Ayres↗
NASA NTRS1999

Is It Possible to Distinguish Between Dust and Salt Aerosol Over Waters with Unknown Chlorophyll Concentrations Using Spectral Remote Sensing?

Atmospheric aerosol has uncertain impacts on the global climate system, as well as on atmospheric and bio-geo-chemical processes of regional and local scales. EOS-MODIS is one example of a satellite sensor designed to improve understanding of the aerosols' type, size and distribution at all temporal and spatial scales. Ocean scientists also plan to use data from EOS-MODIS to assess the temporal and spatial coverage of in-water chlorophyll. MODIS is the first sensor planned to observe the combined ocean-atmosphere system with a wide spectral range (from 410 to 2200 nm). Dust aerosol and salt aerosol have similar spectral signals for wavelengths longer than 550 nm, but because dust selectively absorbs blue light, they have divergent signals in the blue wavelength regions (412 to 490 nm). Chlorophyll also selectively absorbs blue radiation, so that varying chlorophyll concentrations produces a highly varying signal in the blue regions, but less variability in the green, and almost no signal in the red to mid-infrared regions. Thus, theoretically, it may be difficult to differentiate dust and salt in the presence of unknown chlorophyll in the ocean. This study attempts to address the cases in which aerosol and chlorophyll signals can and cannot be separated. For the aerosol spectra, we use the aerosol lookup table from the operational MODIS aerosol-over-ocean algorithm, and for chlorophyll spectra, we use the SeaBAM data set (created for SeaWiFS). We compare the signals using Principal Component Analysis and attempt to retrieve both chlorophyll and aerosol properties using a variant of the operational MODIS aerosol-over-ocean algorithm. Results show that for small optical depths, less than 0.5, it is not possible to differentiate between dust and salt and to determine the chlorophyll concentration at the same time. For larger aerosol optical depths, the chlorophyll signals are comparatively insignificant, and we can hope to distinguish between dust and salt.

Levy, R. C.↗
NASA NTRS1994

Topography of Valles Marineris: Implications for erosional and structural history

Compilation of a simplified geologic/geomorphic map onto digital terrain models of the Valles Marineris permitted an evaluation of elevations in the vicinity of the troughs and the calculation of depth of troughs below surrounding plateaus, thickness of deposits inside the troughs, volumes of void spaces above geologic/geomorphic units, and volumes of deposits. The central troughs north Ophir, north and central Candor, and north Melas Chasmata lie as much as 11 km below the adjacent plateaus. In Ophir and Candor chasmata, interior layered deposits reach 8 km in elevation. If the deposits are lacustrine and if all troughs were interconnected, lake waters standing 8 km high would have spilled out of Coprates Chasma onto the surrounding plateaus having surface elevations of only 4-5 km. On the other hand, the troughs may not have been interconnected at the time of interior-deposit emplacement; they may have formed isolated ancestral basins. The existence of such basins is supported by independent structural and stratigraphic evidence. The ancestral basins may have eventually merged, perhaps through renewed faulting, to form northern subsidiary troughs in Ophir and Candor Chasmata and the Coprates/north Melas/Ius graben system. The peripheral troughs are only 2-5 km deep, shallower than the central troughs. Chaotic terrain is seen in the peripheral troughs near a common contour level of about 4 km on the adjacent plateaus, which supports the idea of release of water under artesian pressure from confined aquifers. The layered deposits in the peripheral troughs may have formed in isolated depressions that harbored lakes and predated the formation of the deep outflow channels. (If these layered deposits are of volcanic origin, they may have been emplaced beneath ice in the manner of table mountains.) Areal and volumetric computations show that erosion widened the troughs by about one-third and that deposits occupy one-sixth of the interior space. Even though the volume eroded is larger than the volume deposited, topographic and geologic considerations imply that material eroded from trough walls was probably part of the interior layered deposits but not their sole source. Additional material may have come from subterranean piping, from reworking of local disintegration products on the floors, such as chaotic materials, or from eolian influx. But overall it is likely that the additional material is volcanic and that it forms mostly the upper, more diversely bedded layers of the interior deposits.

Lucchitta, B. K.↗
NASA NTRS1998

The Athena Mars Rover Science Payload

The Mars Surveyor missions that will be launched in April of 2001 will include a highly capable rover that is a successor to the Mars Pathfinder mission's Sojourner rover. The design goals for this rover are a total traverse distance of at least 10 km and a total lifetime of at least one Earth year. The rover's job will be to explore a site in Mars' ancient terrain, searching for materials likely to preserve a record of ancient martian water, climate, and possibly biology. The rover will collect rock and soil samples, and will store them for return to Earth by a subsequent Mars Surveyor mission in 2005. The Athena Mars rover science payload is the suite of scientific instruments and sample collection tools that will be used to perform this job. The specific science objectives that NASA has identified for the '01 rover payload are to: (1) Provide color stereo imaging of martian surface environments, and remotely-sensed point discrimination of mineralogical composition. (2) Determine the elemental and mineralogical composition of martian surface materials. (3) Determine the fine-scale textural properties of these materials. (4) Collect and store samples. The Athena payload has been designed to meet these objectives. The focus of the design is on field operations: making sure the rover can locate, characterize, and collect scientifically important samples in a dusty, dirty, real-world environment. The topography, morphology, and mineralogy of the scene around the rover will be revealed by Pancam/Mini-TES, an integrated imager and IR spectrometer. Pancam views the surface around the rover in stereo and color. It uses two high-resolution cameras that are identical in most respects to the rover's navigation cameras. The detectors are low-power, low-mass active pixel sensors with on-chip 12-bit analog-to-digital conversion. Filters provide 8-12 color spectral bandpasses over the spectral region from 0.4 to 1.1 micron Narrow-angle optics provide an angular resolution of 0.28 mrad/pixel, nearly a factor of four higher than that of the Mars Pathfinder and Mars Surveyor '98 cameras. Image compression will be performed using a wavelet compression algorithm. The Mini-Thermal Emission Spectrometer (Mini-TES) is a point spectrometer operating in -the thermal IR. It produces high spectral resolution (5 /cm) image cubes with a wavelength range of 5-40 gm, a nominal signal/noise ratio of 500:1, and a maximum angular resolution of 7 mrad (7 cm at a distance of 10 in). The wavelength region over which it operates samples the diagnostic fundamental absorption features of rockforming minerals, and also provides some capability to see through dust coatings that could tend to obscure spectral features. The mineralogical information that Mini-TES provides will be used to select from a distance the rocks and soils that will be investigated in more detail and ultimately sampled. Mini-TES is derived from the MO/MGS TES instrument, but is significantly smaller and simpler. The instrument uses an 8-cm Cassegrain telescope, a Michelson interferometer, and uncooled pyroelectric detectors. Along with its mineralogical capabilities, Mini-TES can provide information on the thermophysical properties of rocks and soils. Viewing upward, it can also provide temperature profiles through the martian atmospheric boundary layer. Elemental and Mineralogical Composition: Once promising samples have been identified from a distance using Pancam/Mini-TES, they will be studied in detail using up to three compositional sensors that can be placed directly against them by an Instrument Arm. The two compositional sensors, presently on the payload are an Alpha-Proton-X-Ray Spectrometer (APXS), and a Mossbauer Spectrometer. The APXS is derived closely from the instrument that flew on Mars Pathfinder. Radioactive alpha sources and three detection modes (alpha, proton, and x-ray) provide elemental abundances of rocks and soils to complement and constrain mineralogical data. The Athena APXS will have a revised mechanical design that will cut down significantly on backscattering of alpha particles from martian atmospheric carbon. It will also include a target of known elemental composition that will be used for calibration purposes. The Athena Mossbauer Spectrometer is a diagnostic instrument for the mineralogy and oxidation state of Fe-bearing phases, which are particularly important on Mars. The instrument measures the resonant absorption of gamma rays produced by a Co-57 source to determine splitting of nuclear energy levels in Fe atoms that is related to the electronic environment surrounding them. It has been under development for space flight for many years at the Technical University of Darmstadt. The Mossbauer Spectrometer (and the other arm instruments) will be able to view a small permanent magnet array that will attract magnetic particles in the martian soil. The payload may also include a Raman Spectrometer. If included, the Raman Spectrometer will provide precise identification of major and minor mineral phases. It requires no sample preparation, and is also sensitive to organics. Fine-Scale Texture: The Instrument Arm a also carries a Microscopic Imager that will obtain high-resolution monochromatic images of the same materials for which compositional data will be obtained. Its spatial resolution is 20 micron/pixel over a 1 cm depth of field, and 40 micron/pixel over a 1-cm depth of field. Like Pancam, it uses the same active pixel sensor detectors and electronics as the rover's navigation cameras. The Instrument Arm is a three degree-of-freedom arm that uses designs and components from the Mars Pathfinder and Mars Surveyor '98 projects. Its primary function is instrument positioning. Along with the instruments noted above, it also carries a brush that can be used to remove dust and other loose coatings from rocks. Sample Collection and Storage: Martian rock and soil samples will be collected using a low-power rotary coring drill called the Mini-Corer. An important characteristic of this device is that it can obtain intact samples of rock from up to 5 cm within strong boulders and bedrock, Nominal core dimensions are 8xl7 mm. The Mini-Corer drills a core to the commanded depth in a rock, shears it off, retains it, and extracts it. It can also acquire samples of loose soil, using soil sample cups that are pressed downward into loose material. The Mini-Corer can drill at angles from vertical to 45' off vertical. It has six interchangeable bits for long life. Mechanical damage to the sample during drilling is minimal, and heating is negligible. After acquisition, the sample may be viewed by the arm instruments, and/or placed in one of 104 compartments in the Sample Container. A subset of the acquired samples may be replaced with other samples obtained later if desired. The Sample Container has no moving parts, and is mounted external to the rover for easy removal by the Mars Surveyor 2005 flight system. Operation of the rover will make extensive use of automated onboard navigation and hazard avoidance capabilities. Otherwise, use of onboard autonomy is minimal. Data downlink capability is about 40 Mbit/sol, and the use of the Mars Surveyor '01 orbiter for data relay imposes a limit of at most two command cycles per sol. Because of the significant amount of time available between command cycles, all payload elements will be operated sequentially, rather than in parallel.; this approach also significantly simplifies operations and minimizes peak power usage. The landing site for the '01 rover has not been selected yet. Site selection will make as full use as possible of Mars Global Surveyor data, and will involve substantial input from the broad Mars science community. Summary: The following table describes the mass, power, providers, and key scientific objectives of all the major elements of the Athena payload. Additional Athena payload information may be found at: http://astrosun.tn.cornell.edu/athena/index.html. Additional information contained in the original.

Squyes, S. W.↗