Advanced electronic tongue concept
This effort is directed at developing a sensor for evaluating water quality.
water quality monitors, electronic tongues, electr↗
SEARCH · Engineering Papers
Results for “water evaluation”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Interface Electronic Circuitry for an Electronic Tongue
Electronic circuitry has been developed to serve as an interface between an electronic tongue and digital input/output boards in a laptop computer that is used to control the tongue and process its readings. Electronic tongues can be used for a variety of purposes, including evaluating water quality, analyzing biochemicals, analyzing biofilms, and measuring electrical conductivities of soils.
Keymeulen, Didier↗
Ares I Scale Model Acoustic Test Instrumentation for Acoustic and Pressure Measurements
Ares I Scale Model Acoustic Test (ASMAT) is a 5% scale model test of the Ares I vehicle, launch pad and support structures conducted at MSFC to verify acoustic and ignition environments and evaluate water suppression systems Test design considerations 5% measurements must be scaled to full scale requiring high frequency measurements Users had different frequencies of interest Acoustics: 200 - 2,000 Hz full scale equals 4,000 - 40,000 Hz model scale Ignition Transient: 0 - 100 Hz full scale equals 0 - 2,000 Hz model scale Environment exposure Weather exposure: heat, humidity, thunderstorms, rain, cold and snow Test environments: Plume impingement heat and pressure, and water deluge impingement Several types of sensors were used to measure the environments Different instrument mounts were used according to the location and exposure to the environment This presentation addresses the observed effects of the selected sensors and mount design on the acoustic and pressure measurements
Vargas, Magda B.↗
Using Earth Observations to Analyze Shoreline Changes and Understand the Effects of Sea Level Rise in Southern Puerto Rico
This summer, the Jobos Bay National Estuarine Research Reserve (JBNERR) partnered with NASA DEVELOP to evaluate water quality, mangrove forest extent, sea level rise, and land cover changes in Jobos Bay. DEVELOP is a national capacity building program that connects satellite data with early career scientists and decision makers. Through ten-week feasibility studies, DEVELOP partners with organizations that have the power to enact policy within their communities. Jobos Bay, in the southeast coast of Puerto Rico, has experienced intense hurricane seasons with increased seasonal storm surge, near-shore land use changes, and strong variations in precipitation and runoff. Through proposals, bi-weekly meetings, and frequent email communication, this cross-sector initiative provided valuable results for management decisions within the reserve. Using satellite observations to measure land use change, the team found that 17% of the reserve has shifted from land to water along the coast since 1997. Using Sentinel-2 the team was able to visualize turbidity, chlorophyll-a, and colored dissolved organic matter (CDOM) for Jobos Bay. While some large events such as Hurricane Maria were reflected in the turbidity analysis, chlorophyll-a and CDOM visualizations were limited by the influence of shallow-water bottom reflectance, particularly around reefs and within the Bay. The team also found that Jobos Bay lost 4.9 square kilometers of mangrove habitat over the past decade, calculated using Landsat 7 and 8 within Google Earth Engine. The results from this study will inform JBNERR and its community members on the regional impacts of sea level rise as well as serve as a baseline for future conservation efforts and research in the estuary.
Olivia Spencer↗
Evaluation of pressurized water cleaning systems for hardware refurbishment
Historically, refurbishment processes for RSRM motor cases and components have employed environmentally harmful materials. Specifically, vapor degreasing processes consume and emit large amounts of ozone depleting compounds. This program evaluates the use of pressurized water cleaning systems as a replacement for the vapor degreasing process. Tests have been conducted to determine if high pressure water washing, without any form of additive cleaner, is a viable candidate for replacing vapor degreasing processes. This paper discusses the findings thus far of Engineering Test Plan - 1168 (ETP-1168), 'Evaluation of Pressurized Water Cleaning Systems for Hardware Refurbishment.'
Dillard, Terry W.↗
Adhesive evaluation of water-soluble LARC-TPI
The water-soluble polyimide, identified as TPI(MTC)/H2O, was evaluated as a high temperature thermoplastic adhesive for bonding Ti-6Al-4V and comparing those results primarily with results reported in earlier work with the polyamic-acid/diglyme material. The lap shear strength test was the primary test performed to evaluate the adhesive before (controls) and after thermal exposure in air at 204 C for up to 5000 hours and after a 72 hour water-boil exposure. Lap shear strengths were determined at RT, 177, 204, and 232 C. The adhesive was also characterized after fracture by determining the glass transition temperature as well as defining the mode of failure by visual observation. In general, the results indicate that the TPI(MTC)/H2O retains high lap shear strengths after thermal exposure but had reduced strengths after the water-boil exposure. All failures were cohesive. The TPI(MTC)/H2O compared very well with previous data reported for the standard polyamic-acid/diglyme LARC-TPI results, and therefore, shows promise as a water-soluble adhesive for use in various applications.
Progar, Donald J.↗
Adhesive evaluation of water-soluble LARC-TPI
The water-soluble polyimide, identified as TPI(MTC)/H2O, was evaluated as a high temperature thermoplastic adhesive for bonding Ti-6Al-4V and comparing those results primarily with results reported in earlier work with the polyamic-acid/diglyme material. The lap shear strength test was the primary test performed to evaluate the adhesive before (controls) and after thermal exposure in air at 204 C for up to 5000 hours and after a 72 hour water-boil exposure. Lap shear strengths were determined at RT, 177, 204, and 232 C. The adhesive was also characterized after fracture by determining the glass transition temperature as well as defining the mode of failure by visual observation. In general, the results indicate that the TPI(MTC)/H2O retains high lap shear strengths after thermal exposure but had reduced strengths after the water-boil exposure. All failures were cohesive. The TPI(MTC)/H2O compared very well with previous data reported for the standard polyamic-acid/diglyme LARC-TPI results, and therefore, shows promise as a water-soluble adhesive for use in various applications.
Progar, D. J.↗
Validation of Modis Cloud Liquid Water Path to Prepare for Pace Evaluation Efforts
The Plankton, Aerosol, Cloud, ocean Ecosystem (PACE) mission will launch in January 2024, extending and improving NASA’s global satellite observations in its eponymous domains. PACE’s hyperspectral Ocean Color Instrument (OCI) will offer daily near-global spatial coverage with a 1.2 km horizontal pixel size at the subsatellite point. PACE will also have two multi-angle polarimeters (HARP2 and SPEXone) capable of advanced atmospheric characterization. Validation of cloud retrievals is challenging. Here we evaluate liquid water path (LWP) from MODIS from the standard (MOD06) product. The same cloud optical properties retrieval algorithm will be applied to OCI data. This will allow us to understand the expected performance of this algorithm and to develop the processing and analysis code needed to evaluate PACE data. Please tell us what you think and if we should be doing something differently!
MODIS↗
Experimental Evaluation of a Water Shield for a Surface Power Reactor
A water based shielding system is being investigated for use on initial lunar surface power systems. The use of water may lower overall cost (as compared to development cost for other materials) and simplify operations in the setup and handling. The thermal hydraulic performance of the shield is of significant interest. The mechanism for transferring heat through the shield is natural convection. A representative lunar surface reactor design is evaluated at various power levels in the Water Shield Testbed (WST) at the NASA Marshall Space Flight Center. The evaluation compares the experimental data from the WST to CFD models. Performance of a water shield on the lunar surface is predicted by CFD models anchored to test data, and by matching relevant dimensionless parameters.
Pearson, J. B.↗
Evaluation of the Water Film Weber Number in Glaze Icing Scaling
Icing scaling tests were performed in the NASA Glenn Icing Research Tunnel to evaluate a new scaling method, developed and proposed by Feo for glaze icing, in which the scale liquid water content and velocity were found by matching reference and scale values of the nondimensional water-film thickness expression and the film Weber number. For comparison purpose, tests were also conducted using the constant We(sub L) method for velocity scaling. The reference tests used a full-span, fiberglass, 91.4-cm-chord NACA 0012 model with velocities of 76 and 100 knot and MVD sizes of 150 and 195 microns. Scale-to-reference model size ratio was 1:2.6. All tests were made at 0deg AOA. Results will be presented for stagnation point freezing fractions of 0.3 and 0.5.
Tsao, Jen-Ching↗
Colorimetric-Solid Phase Extraction Technology for Water Quality Monitoring: Evaluation of C-SPE and Debubbling Methods in Microgravity
Colorimetric-solid phase extraction (C-SPE) is being developed as a method for in-flight monitoring of spacecraft water quality. C-SPE is based on measuring the change in the diffuse reflectance spectrum of indicator disks following exposure to a water sample. Previous microgravity testing has shown that air bubbles suspended in water samples can cause uncertainty in the volume of liquid passed through the disks, leading to errors in the determination of water quality parameter concentrations. We report here the results of a recent series of C-9 microgravity experiments designed to evaluate manual manipulation as a means to collect bubble-free water samples of specified volumes from water sample bags containing up to 47% air. The effectiveness of manual manipulation was verified by comparing the results from C-SPE analyses of silver(I) and iodine performed in-flight using samples collected and debubbled in microgravity to those performed on-ground using bubble-free samples. The ground and flight results showed excellent agreement, demonstrating that manual manipulation is an effective means for collecting bubble-free water samples in microgravity.
Hazen-Bosveld, April↗
Endurance Test and Evaluation of Alkaline Water Electrolysis Cells
The overall objective of this program is to assess the state of alkaline water electrolysis cell technology and its potential as part of a Regenerative Fuel Cell System (RFCS) of a multikilowatt orbiting powerplant. The program evaluates the endurance capabilities of alkaline electrolyte water electrolysis cells under various operating conditions, including constant condition testing, cyclic testing and high pressure testing. The RFCS demanded the scale-up of existing cell hardware from 0.1 sq ft active electrode area to 1.0 sq ft active electrode area. A single water electrolysis cell and two six-cell modules of 1.0 sq ft active electrode area were designed and fabricated. The two six-cell 1.0 sq ft modules incorporate 1.0 sq ft utilized cores, which allow for minimization of module assembly complexity and increased tolerance to pressure differential. A water electrolysis subsystem was designed and fabricated to allow testing of the six-cell modules. After completing checkout, shakedown, design verification and parametric testing, a module was incorporated into the Regenerative Fuel Cell System Breadboard (RFCSB) for testing at Life Systems, Inc., and at NASA JSC.
Kovach, Andrew J.↗
Experimental Evaluation of a Water Shield for a Surface Power Reactor
As part of the Vision for Space Exploration the end of the next decade will bring man back to the surface of the moon. One of the most critical issues for the establishment of human presence on the moon will be the availability of compact power sources. The establishment of man on the moon will require power from greater than 10's of kWt's in follow on years. Nuclear reactors are extremely we11 suited to meet the needs for power generation on the lunar or Martian surface. reactor system. Several competing concepts exist for lightweight, safe, robust shielding systems such as a water shield, lithium hydride (LiH), Boron Carbide, and others. Water offers several potential advantages, including reduced cost, reduced technical risk, and reduced mass. Water has not typically been considered for space reactor applications because of the need for gravity to remove the potential for radiation streaming paths. The water shield concept relies on predictions of passive circulation of the shield water by natural convection to adequately cool the shield. This prediction needs to be experimentally evaluated, especially for shields with complex geometries. MSFC has developed the experience and fac necessary to do this evaluation in the Early Flight Fission - Test Facility (EFF-TF).
Pearson, J. Boise↗
Evaluation of Regional Water and Energy Balance in Contemporary Reanalyses
Regional to continental water and energy balance in reanalyses provide crucial information on the climate and climate variations in that region and can contrast other regions. Reanalyses are a valuable tool in piecing together the complete balance owing to the incorporation of the budgets in the background model and the assimilation of observation. On the other hand, the background model has its own biases and observational assimilation can lead to non-negligible tendencies within the budgets, and these can vary over space and time. Here, we will compare the balance within several reanalyses and how they have evolved over recent decades. Several observational data products will provide reference points in the comparison. In addition, a recent project has integrated observations of the water and energy budgets in an optimization that aims to reduce the imbalance of regional budgets in using observational terms from disparate sources. In evaluating the regional balances, we will incorporate, when available, the water and energy convergence terms as well as their analysis increments (which may be diagnosed as residuals). The reanalyses considered here include: Japanese Reanalyses for Three Quarters Century (JRA3Q), ECMWF Reanalysis version 5 (ERA5), Modern Era Retrospective-analysis for Research and Applications version 2 (MERRA-2) and the NCEP Reanalysis II (NCEPR2). NCEPR2 is representative of the late 90s technology, while the others represent the contemporary climate reanalyses presently available. We will discuss the regional balances over key river basins (e.g. Mississippi and Amazon), and a range of continents including those well observed (North America and Europe) and those with fewer consistent observations (e.g. Africa). These contrasting regions show the degree of advancement in reanalyses and expose areas in need of improvement. The results also demonstrate the usefulness of producing complete atmospheric water and energy budgets as part of the diagnostic output.
Michael G Bosilovich↗
Evaluation of Regional Water and Energy Balance in Contemporary Reanalyses
Regional to continental water and energy balance in reanalyses provide crucial information on the climate and climate variations in that region and can contrast other regions. Reanalyses are a valuable tool in piecing together the complete balance owing to the incorporation of the budgets in the background model and the assimilation of observation. On the other hand, the background model has its own biases and observational assimilation can lead to non-negligible tendencies within the budgets, and these can vary over space and time. Here, we will compare the balance within several reanalyses and how they have evolved over recent decades. Several observational data products will provide reference points in the comparison. In addition, a recent project has integrated observations of the water and energy budgets in an optimization that aims to reduce the imbalance of regional budgets in using observational terms from disparate sources. In evaluating the regional balances, we will incorporate, when available, the water and energy convergence terms as well as their analysis increments (which may be diagnosed as residuals). The reanalyses considered here include: Japanese Reanalyses for Three Quarters Century (JRA3Q), ECMWF Reanalysis version 5 (ERA5), Modern Era Retrospective-analysis for Research and Applications version 2 (MERRA-2) and the NCEP Reanalysis II (NCEPR2). NCEPR2 is representative of the late 90s technology, while the others represent the contemporary climate reanalyses presently available. We will discuss the regional balances over key river basins (e.g. Mississippi and Amazon), and a range of continents including those well observed (North America and Europe) and those with fewer consistent observations (e.g. Africa). These contrasting regions show the degree of advancement in reanalyses and expose areas in need of improvement. The results also demonstrate the usefulness of producing complete atmospheric water and energy budgets as part of the diagnostic output.
Michael Bosilovich↗
Subscale, hydrogen-burning, airframe-integrated-scramjet: Experimental and theoretical evaluation of a water cooled strut airframe-integrated-scramjet: Experimental leading edge
A water-cooled leading-edge design for an engine/airframe integrated scramjet model strut leading edge was evaluated. The cooling design employs a copper cooling tube brazed just downstream of the leading edge of a wedge-shaped strut which is constructed of oxygen-free copper. The survival of the strut leading edge during a series of tests at stagnation point heating rates confirms the practicality of the cooling design. A finite difference thermal model of the strut was also proven valid by the reasonable agreement of calculated and measured values of surface temperature and cooling-water heat transfer.
Pinckney, S. Z.↗
Evaluating the Global Water and Energy Cycles in Reanalyses Using Ensemble Spread
Reanalyses provide continuous observation based global data over weather and climate time scales through observational assimilation. Ensemble forecasts are a component of modern data assimilation systems, providing information to the analysis process. Storing this spread over the duration of a climate reanalysis will provide insight to the variations of the model that underlies the reanalysis data. Global water and energy cycles (WECs) are a critical aspect of both weather and climate, yet there are some large gaps in the observation of key components as well as their representation in models and reanalyses. NASA’s Water and Energy cycle Studies (NEWS) program is developing a corrected and balanced budget data set that is closed at monthly and regional scales during the 21st century, so far. In this paper, we will evaluate reanalysis WEC components against the initial NEWS collection of observation, but integrate the analysis spread from the reanalysis data assimilation as a new perspective on the evaluation. The initial evaluation will cover a few more recent years using ERA5 10 member spread. As the GMAO’s production of the Modern-Era Retrospective analysis for Research and Applications 21st Century (MERRA-21C) progresses, the effort will include the MERRA-21C 32 member spread. Ultimately, we will explore the potential of the ensemble spread as a measure of uncertainty in the reanalysis.
Michael Bosilovich↗
Evaluation of surface water resources from machine-processing of ERTS multispectral data
The surface water resources of a large metropolitan area, Marion County (Indianapolis), Indiana, are studied in order to assess the potential value of ERTS spectral analysis to water resources problems. The results of the research indicate that all surface water bodies over 0.5 ha were identified accurately from ERTS multispectral analysis. Five distinct classes of water were identified and correlated with parameters which included: degree of water siltiness; depth of water; presence of macro and micro biotic forms in the water; and presence of various chemical concentrations in the water. The machine processing of ERTS spectral data used alone or in conjunction with conventional sources of hydrological information can lead to the monitoring of area of surface water bodies; estimated volume of selected surface water bodies; differences in degree of silt and clay suspended in water and degree of water eutrophication related to chemical concentrations.
Mausel, P. W.↗