Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “trajectory specification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS2002

Trajectories for High Specific Impulse High Specific Power Deep Space Exploration

Flight times and deliverable masses for electric and fusion propulsion systems are difficult to approximate. Numerical integration is required for these continuous thrust systems. Many scientists are not equipped with the tools and expertise to conduct interplanetary and interstellar trajectory analysis for their concepts. Several charts plotting the results of well-known trajectory simulation codes were developed and are contained in this paper. These charts illustrate the dependence of time of flight and payload ratio on jet power, initial mass, specific impulse and specific power. These charts are intended to be a tool by which people in the propulsion community can explore the possibilities of their propulsion system concepts. Trajectories were simulated using the tools VARITOP and IPOST. VARITOP is a well known trajectory optimization code that involves numerical integration based on calculus of variations. IPOST has several methods of trajectory simulation; the one used in this paper is Cowell's method for full integration of the equations of motion. An analytical method derived in the companion paper was also evaluated. The accuracy of this method is discussed in the paper.

Polsgrove, Tara↗
NASA NTRS2002

Simulation of Trajectories for High Specific Impulse Deep Space Exploration

Difficulties in approximating flight times and deliverable masses for continuous thrust propulsion systems have complicated comparison and evaluation of proposed propulsion concepts. These continuous thrust propulsion systems are of interest to many groups, not the least of which are the electric propulsion and fusion communities. Several charts plotting the results of well-known trajectory simulation codes were developed and are contained in this paper. These charts illustrate the dependence of time of flight and payload ratio on jet power, initial mass, specific impulse and specific power. These charts are intended to be a tool by which people in the propulsion community can explore the possibilities of their propulsion system concepts. Trajectories were simulated using the tools VARITOP and IPOST. VARITOP is a well known trajectory optimization code that involves numerical integration based on calculus of variations. IPOST has several methods of trajectory simulation; the one used in this paper is Cowell's method for full integration of the equations of motion. The analytical method derived in the companion paper was also used to simulate the trajectory. The accuracy of this method is discussed in the paper.

Polsgrove, Tara↗
NASA NTRS2002

Trajectories for High Specific Impulse High Specific Power Deep Space Exploration

Preliminary results are presented for two methods to approximate the mission performance of high specific impulse high specific power vehicles. The first method is based on an analytical approximation derived by Williams and Shepherd and can be used to approximate mission performance to outer planets and interstellar space. The second method is based on a parametric analysis of trajectories created using the well known trajectory optimization code, VARITOP. This parametric analysis allows the reader to approximate payload ratios and optimal power requirements for both one-way and round-trip missions. While this second method only addresses missions to and from Jupiter, future work will encompass all of the outer planet destinations and some interstellar precursor missions.

Polsgrove, T.↗
NASA NTRS1962

Rendezvous Guidance Technology

The literature on rendezvous guidance technology is reviewed and a bibliography of about 160 documents is presented. The importance of the proper selection of the ascent trajectory and of the orbit for a manned space station or an orbiting launch complex is emphasized. The way the launch delay problem affects the selection of the ascent trajectory and the target orbit is discussed. A specific ascent trajectory and an orbit for a manned space station or an orbiting launch complex is recommended on the premise that launch delay problems will continue to outweigh most of the other orbit selection criteria. A new method for determining the velocity corrections required for mid-course guidance is proposed . The proposed methods consist of an "exact-numerical" solution of the relative equations of motion in the "Shell-coordinate system." The proposed "exact-numerical" method extends the applicability of the mid- course equations to a much greater range than that of the currently available linear methods .

Trajectory↗
NASA NTRS2008

A New Maneuver for Escape Trajectories

This presentation put forth a new maneuver for escape trajectories and specifically sought to find an analytical approximation for medium thrust trajectories. In most low thrust derivations the idea is that escape velocity is best achieved by accelerating along the velocity vector. The reason for this is that change in specific orbital energy is a function of velocity and acceleration. However, Levin (1952) suggested that while this is a locally optimal solution it might not be a globally optimal one. Turning acceleration inward would drop periapse giving a higher velocity later in the trajectory. Acceleration at that point would be dotted against a higher magnitude V giving a greater rate of change of mechanical energy. The author then hypothesized that decelerating from the initial orbit and then accelerating at periapse would not lead to a gain in greater specific orbital energy--however, the hypothesis was incorrect. After considerable derivation it was determined that this new maneuver outperforms a direct burn when the overall DeltaV budget exceeds the initial orbital velocity (the author has termed this the Heinlein maneuver). The author provides a physical explanation for this maneuver and presents optimization analyses.

Adams, Robert B.↗
NASA NTRS1981

Experiences in Delta mission planning

The Delta launch vehicle has experienced 153 successful launches since 1960 and 40 more are scheduled. Relying on up-to-date technology and proven flight hardware, the Delta vehicle has been used for low to high circular and geosynchronous transfer orbits, high elliptic probes, and lunar and planetary missions. A history of Delta launches and configuration modifications is presented, noting a 92-95% success rate and its cost effective role in reimbursable missions. Elements of mission planning such as feasibility studies (1-3 yrs), spacecraft restraints manuals, reference trajectories, preliminary mission analysis, detailed test objectives, range/safety studies, guided nominal trajectory, and mission specific studies are discussed. Trajectory shaping determines vehicle and spacecraft restraints, optimizes the trajectory, and maximizes the payload capabilities. Improvements in the Delta vehicle have boosted payloads from 100 to 2890 lbs., improving the price per pound ratio, as costs have risen, only by a factor of three. Current launch schedules extend well into 1985.

Kork, J.↗
NASA NTRS1971

Space Trajectories Error Analysis (STEAP) Programs. Volume 1: Analytic manual, update

Manual revisions are presented for the modified and expanded STEAP series. The STEAP 2 is composed of three independent but related programs: NOMAL for the generation of n-body nominal trajectories performing a number of deterministic guidance events; ERRAN for the linear error analysis and generalized covariance analysis along specific targeted trajectories; and SIMUL for testing the mathematical models used in the navigation and guidance process. The analytic manual provides general problem description, formulation, and solution and the detailed analysis of subroutines. The programmers' manual gives descriptions of the overall structure of the programs as well as the computational flow and analysis of the individual subroutines. The user's manual provides information on the input and output quantities of the programs. These are updates to N69-36472 and N69-36473.

Source record↗
NASA NTRS1980

Mass reduction for advanced winged entry vehicles through integrated thermostructural-trajectory design

This study examines the impact of aerothermo-structure design integration on thermal protection system (TPS) mass for advanced winged entry vehicles. Four basic categories of TPS are considered: external insulation, metallic hot structures, metallic standoff, and hybrid systems. A variety of concepts that fit in these basic categories are examined. Entry trajectories tailored specifically to the characteristics of each TPS concept are generated. An aerodynamic heating program is used with the appropriately tailored trajectories to determine the centerline TPS requirements for each concept. Included in the investigation is the impact on the combined TPS-structure mass of structural materials which maintain their integrity to higher temperatures. Results indicate that significant mass reduction can be realized through appropriate aerothermo-structure design integration. An assessment is made of the relative merits of the TPS/structure/trajectory combinations considered in the study.

Wurster, K. E.↗
NASA NTRS1973

Failure management of multiple gimbal inertial systems for space shuttle

A failure detection and isolation technique for use with four gimbaled inertial measurement units (IMU) is presented. By using simulated boost and entry shuttle trajectories with specific gimbaled IMU models, failure detection thresholds are developed based on red-line life dependent requirements and warning thresholds within the red-line thresholds based on expected worst case IMU performance. Using these trajectories, established trajectory threshold, and multiple IMU models, various failure detection and isolation techniques are evaluated for application in both powered and unpowered flight phases. The adequacy of the systems for both attitude and velocity detection methods is evaluated and recommendations for space shuttle applications are made.

Dove, D. W.↗
NASA NTRS1972

Redundancy management of multiple inertial systems for Space Shuttle.

Failure detection and isolation techniques are developed for application to off-the-shelf type four-gimbaled inertial measurement units such as the KT-70 or Carousel IV. By using simulated boost and entry shuttle trajectories with specific gimbaled IMU models, failure detection thresholds are developed based upon red-line life dependent requirements and warning thresholds are given within the red-line thresholds based upon expected worst case IMU performance. Using these trajectories, established trajectory thresholds, and multiple IMU models, various failure detection and isolation techniques are evaluated for application in both powered and unpowered flight phases. The adequacy of off-the-shelf systems for both attitude and velocity detection methods is evaluated and recommendations for shuttle application are made.

Dove, D. W.↗
NASA NTRSDate not supplied

Flight Dynamics Analysis of Lunar Fly-By Altitudes and Near Rectilinear Halo Orbit (NRHO) Resonances With Applications to NASA's Artemis Program

As the interest in lunar exploration grows exponentially, many companies and government agencies around the world are looking to establish presence on the lunar surface. With NASA’s Artemis program and Lunar Gateway, NASA seeks to return to the moon and for exploration. To achieve such goals, many orbit regimes and patterns were explored. Due to its minimal station keeping requirements and communications access, a specific set of Halo Orbits known as Near Rectilinear Halo Orbits (NRHO) was selected for use cases in both NASA’s Artemis Program as well as Lunar Gateway. The primary objective of this effort is to perform a flight dynamics analysis, which analyzes trajectories targeting specific lunar fly-by altitudes and NRHO Resonances in the L2 Southern Family.

NASA↗
NASA NTRS1981

An assessment of the impact of transition on advanced winged entry vehicle thermal protection system mass

This study examines the impact of turbulent heating on thermal protection system (TPS) mass for advanced winged entry vehicles. Four basic systems are considered: insulative, metallic hot structures, metallic standoff, and hybrid systems. TPS sizings are performed using entry trajectories tailored specifically to the characteristics of each TPS concept under consideration. Comparisons are made between systems previously sized under the assumption of all laminar heating and those sized using a baseline estimate of transition and turbulent heating. The relative effect of different transition criteria on TPS mass requirements is also examined. Also investigated are entry trajectories tailored to alleviate turbulent heating. Results indicate the significant impact of turbulent heating on TPS mass and demonstrate the importance of both accurate transition criteria and entry trajectory tailoring.

Wurster, K. E.↗
NASA NTRS1971

Support requirements for remote sensor systems on unmanned planetary missions, phase 3

The results of a study to determine the support requirements for remote sensor systems on unmanned planetary flyby and orbiter missions are presented. Sensors and experiment groupings for selected missions are also established. Computer programs were developed to relate measurement requirements to support requirements. Support requirements were determined for sensors capable of performing required measurements at various points along the trajectories of specific selected missions.

Source record↗
NASA NTRS1992

Radiation safety in aircraft operations

Data from a 7-yr flight experiment program to measure the significant biological components (tissue ionization rates, neutron flux, and nuclear reaction star rates) as a function of solar cycle, altitude, latitude and longitude from which biological risk from radiation is estimated are used to evaluate radiation dose and dose equivalents along specific flight trajectories. The data base used and the corresponding time-dependent global model are described. Ionization rates in air measured by argon filled chambers at solar minimum and maximum, and radiation measurements of the Brookhaven National Laboratory instrument compared to the present model are illustrated in tabular form. The global pressure distribution for solstice conditions at 14 km is shown.

Wilson, J. W.↗
NASA NTRS1998

Geospace Magnetospheric Dynamics Mission

The Geospace Magnetospheric Dynamics (GMD) mission is designed to provide very closely spaced, multipoint measurements in the thin current sheets of the magnetosphere to determine the relation between small scale processes and the global dynamics of the magnetosphere. Its trajectory is specifically designed to optimize the time spent in the current layers and to minimize radiation damage to the spacecraft. Observations are concentrated in the region 8 to 40 R(sub E) The mission consists of three phases. After a launch into geostationary transfer orbit the orbits are circularized to probe the region between geostationary orbit and the magnetopause; next the orbit is elongated keeping perigee at the magnetopause while keeping the line of apsides down the tail. Finally, once apogee reaches 40 R(sub E) the inclination is changed so that the orbit will match the profile of the noon-midnight meridian of the magnetosphere. This mission consists of 4 solar electrically propelled vehicles, each with a single NSTAR thruster utilizing 100 kg of Xe to tour the magnetosphere in the course of a 4.4 year mission, the same thrusters that have been successfully tested on the Deep Space-1 mission.

Russell, C. T.↗
NASA NTRS2015

Initial Analysis of and Predictive Model Development for Weather Reroute Advisory Use

In response to severe weather conditions, traffic management coordinators (TMCs) reroute air traffic around regions of airspace affected by the severe weather. Presently, acceptable reroutes are specified by issuing reroute advisories. Advisories, based on reroutes published in the National Severe Weather Playbook, consist of several routes describing routing options. These reroutes are selected by TMCs based on their understanding of weather conditions and their previous experience dealing with similar weather conditions. Providing recommendations and analysis of available reroute options could assist the TMCs in making rerouting decisions. While reroute advisories have historically been based on Playbook plays, plays are frequently modified or combined to generate an advisory. Thus, it is natural to present rerouting suggestions to TMCs as modified Playbook plays. The challenge here is to compare advisory subroutes and play subroutes in a meaningful way in order to map advisories back to the Playbook plays upon which they may have been based. In this work, several subroute comparison metrics are presented and discussed. One of these metrics is then used to match advisories to Playbook plays. With the development and implementation of NextGen technologies, there is currently a trend of moving away from the pre-defined Playbook plays (and related advisories) in favor of a more precise specification of trajectories using GPS based navigation tools, such as area navigation (RNAV). Moving towards ubiquitous use of RNAV routes, the objective of rerouting flights will be met with more precisely specified and accurately flown RNAV routes. In the final version of this paper, significant RNAV routes will be identified by finding RNAV routes that are flown frequently. This will require a trajectory comparison technique to compare actually flown flight tracks to specified RNAV routes. The metrics developed here will be used or modified for this task.

weather required reroutes↗