Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “time-series analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

A laboratory measurement of CCD photometric and dimensional stability

The sun exhibits periodic and quasi-periodic variability in its total luminosity, which provides information about its internal structure and dynamics. Variability ranges from a few minutes to many-year time scales, with amplitudes as small as a few ppm in the milliHz band. Extension of this analysis to a large sample of outer stars would be interesting: a panoramic detector such as a CCD could record many stars at once. To meet this objective, a ppm time-series differential precision is required. Laboratory CCD photometric measurements presented here are promising for such an instrument. Normalizing the response from a portion of the CCD area removes most of the individual-frame variability. When a trend attributed to a thermal transient in the CCD dewar is removed, the individual-frame photometric precision is about 0.0001, limited by photoelectron counting statistics. The time-series power spectrum is flat within the desired frequency domain. Analysis of the dimensional stability of the CCD within the same data set indicates better than ppm performance, when first-order bulk motion and magnification changes are removed.

Buffington, Andrew↗
NASA NTRS1991

Regional climate change predictions from the Goddard Institute for Space Studies high resolution GCM

A new diagnostic tool is developed for examining relationships between the synoptic scale circulation and regional temperature distributions in GCMs. The 4 x 5 deg GISS GCM is shown to produce accurate simulations of the variance in the synoptic scale sea level pressure distribution over the U.S. An analysis of the observational data set from the National Meteorological Center (NMC) also shows a strong relationship between the synoptic circulation and grid point temperatures. This relationship is demonstrated by deriving transfer functions between a time-series of circulation parameters and temperatures at individual grid points. The circulation parameters are derived using rotated principal components analysis, and the temperature transfer functions are based on multivariate polynomial regression models. The application of these transfer functions to the GCM circulation indicates that there is considerable spatial bias present in the GCM temperature distributions. The transfer functions are also used to indicate the possible changes in U.S. regional temperatures that could result from differences in synoptic scale circulation between a 1XCO2 and a 2xCO2 climate, using a doubled CO2 version of the same GISS GCM.

Crane, Robert G.↗
NASA NTRS1997

Satellite Analysis of Ocean Biogeochemistry and Mesoscale Variability in the Sargasso Sea

The objective of this study was to analyze the impact of spatial variability on the time-series of biogeochemical measurements made at the U.S. JGOFS Bermuda Atlantic Time-series Study (BATS) site. Originally the study was planned to use SeaWiFS as well as AVHRR high-resolution data. Despite the SeaWiFS delays we were able to make progress on the following fronts: (1) Operational acquisition, processing, and archive of HRPT data from a ground station located in Bermuda; (2) Validation of AVHRR SST data using BATS time-series and spatial validation cruise CTD data; (3) Use of AVHRR sea surface temperature imagery and ancillary data to assess the impact of mesoscale spatial variability on P(CO2) and carbon flux in the Sargasso Sea; (4) Spatial and temporal extent of tropical cyclone induced surface modifications; and (5) Assessment of eddy variability using TOPEX/Poseidon data.

Siegel, D. A.↗
NASA NTRS1992

Astronomical CCD observing and reduction techniques

CCD instrumentation and techniques in observational astronomy are surveyed. The general topics addressed include: history of large array scientific CCD imagers; noise sources and reduction processes; basic photometry techniques; introduction to differential time-series astronomical photometry using CCDs; 2D imagery; point source spectroscopy; extended object spectrophotometry; introduction to CCD astrometry; solar system applications for CCDs; CCD data; observing with infrared arrays; image processing, data analysis software, and computer systems for CCD data reduction and analysis. (No individual items are abstracted in this volume)

Howell, Steve B.↗
NASA NTRSDate not supplied

BEAST: Expanding Sustainable Data Infrastructure for High-Enthalpy Facilities

Reproducible, data-driven thermal protection system (TPS) research requires that experimental records from high-enthalpy testing be consistently structured, traceable, and accessible across campaigns and institutions. In practice, however, arcjet and plasma facilities data remain largely fragmented: raw diagnostics are stored in ad hoc formats, material sample histories are disconnected from test conditions, and metadata standards are absent, precluding systematic cross-campaign analysis and long-term reuse. BEAST (Backend for Experiment Analysis, Storage, and Traceability) is an open-source, web-based platform that addresses these limitations by providing a unified, queryable infrastructure for high-enthalpy ground-test data [1]. First presented at the 15th Ablation Workshop [2], BEAST has since undergone significant development. The platform ingests and structures multi-channel time-series diagnostics, facility configurations, and material property records within a common provenance model, ensuring end-to-end traceability from raw sensor acquisition to reduced experimental quantities. A versioned material library links specimen identity and processing history to the specific runs in which each sample was tested. An integrated modeling workbench enables training and evaluation of regression models directly on archived experimental data, supporting condition interpolation and the construction of empirical material response databases. Beyond its original deployment at NASA Ames Research Center, BEAST has been designed to be facility-agnostic, with ongoing efforts to extend its adoption to other facilities. Its modular architecture accommodates heterogeneous diagnostic setups and facility types, and its future open-source distribution allows institutions to build on a common data standard rather than maintaining isolated, bespoke solutions. BEAST is further integrated within a broader ecosystem of companion tools: arcjetCV [3] extracts recession rates and shock standoff distances from high-speed video using computer vision, and miniSTARscan [4] provides sub-minute, portable photogrammetric surface reconstruction of test articles before and after exposure. All tools share a common data schema, enabling seamless ingestion of surface geometry, imagery, and time-series data into a single, coherent experimental record.

Database↗
NASA NTRSDate not supplied

BEAST: Expanding Sustainable Data Infrastructure for High-Enthalpy Facilities

Reproducible, data-driven thermal protection system (TPS) research requires that experimental records from high-enthalpy testing be consistently structured, traceable, and accessible across campaigns and institutions. In practice, however, arcjet and plasma facilities data remain largely fragmented: raw diagnostics are stored in ad hoc formats, material sample histories are disconnected from test conditions, and metadata standards are absent, precluding systematic cross-campaign analysis and long-term reuse. BEAST (Backend for Experiment Analysis, Storage, and Traceability) is an open-source, web-based platform that addresses these limitations by providing a unified, queryable infrastructure for high-enthalpy ground-test data [1]. First presented at the 15th Ablation Workshop [2], BEAST has since undergone significant development. The platform ingests and structures multi-channel time-series diagnostics, facility configurations, and material property records within a common provenance model, ensuring end-to-end traceability from raw sensor acquisition to reduced experimental quantities. A versioned material library links specimen identity and processing history to the specific runs in which each sample was tested. An integrated modeling workbench enables training and evaluation of regression models directly on archived experimental data, supporting condition interpolation and the construction of empirical material response databases. Beyond its original deployment at NASA Ames Research Center, BEAST has been designed to be facility-agnostic, with ongoing efforts to extend its adoption to other facilities. Its modular architecture accommodates heterogeneous diagnostic setups and facility types, and its future open-source distribution allows institutions to build on a common data standard rather than maintaining isolated, bespoke solutions. BEAST is further integrated within a broader ecosystem of companion tools: arcjetCV [3] extracts recession rates and shock standoff distances from high-speed video using computer vision, and miniSTARscan [4] provides sub-minute, portable photogrammetric surface reconstruction of test articles before and after exposure. All tools share a common data schema, enabling seamless ingestion of surface geometry, imagery, and time-series data into a single, coherent experimental record.

Database↗
NASA NTRS1984

Time series modeling of human operator dynamics in manual control tasks

A time-series technique is presented for identifying the dynamic characteristics of the human operator in manual control tasks from relatively short records of experimental data. Control of system excitation signals used in the identification is not required. The approach is a multi-channel identification technique for modeling multi-input/multi-output situations. The method presented includes statistical tests for validity, is designed for digital computation, and yields estimates for the frequency responses of the human operator. A comprehensive relative power analysis may also be performed for validated models. This method is applied to several sets of experimental data; the results are discussed and shown to compare favorably with previous research findings. New results are also presented for a multi-input task that has not been previously modeled to demonstrate the strengths of the method.

Biezad, D. J.↗
NASA NTRS1984

Time Series Modeling of Human Operator Dynamics in Manual Control Tasks

A time-series technique is presented for identifying the dynamic characteristics of the human operator in manual control tasks from relatively short records of experimental data. Control of system excitation signals used in the identification is not required. The approach is a multi-channel identification technique for modeling multi-input/multi-output situations. The method presented includes statistical tests for validity, is designed for digital computation, and yields estimates for the frequency response of the human operator. A comprehensive relative power analysis may also be performed for validated models. This method is applied to several sets of experimental data; the results are discussed and shown to compare favorably with previous research findings. New results are also presented for a multi-input task that was previously modeled to demonstrate the strengths of the method.

Biezad, D. J.↗
NASA NTRS1991

Nonlinear stability and control study of highly maneuverable high performance aircraft

The purpose was to develop and apply new nonlinear system methodologies to the stability analysis and adaptive control of high angle of attack (alpha) aircraft such as the F-18. Considerable progress is documented on nonlinear adaptive control and associated model development, identification, and simulation. The analysis considered linear and nonlinear, longitudinal, high alpha aircraft dynamics with varying degrees of approximation dependent on the purpose. In all cases, angle of attack or pitch rate was controlled primarily by a horizontal stabilizer. In most cases studied, a linear adaptive controller provided sufficient stability. However, it has been demonstrated by simulation of a simplified nonlinear model that certain large rapid maneuvers were not readily stabilized by the investigated linear adaptive control, but were controlled instead by means of a nonlinear time-series based adaptive control.

Mohler, R. R.↗
NASA NTRS1975

Stepwise Iterative Fourier Transform: The SIFT

A program, designed specifically to study the respective effects of some common data problems on results obtained through stepwise iterative Fourier transformation of synthetic data with known waveform composition, was outlined. Included in this group were the problems of gaps in the data, different time-series lengths, periodic but nonsinusoidal waveforms, and noisy (low signal-to-noise) data. Results on sinusoidal data were also compared with results obtained on narrow band noise with similar characteristics. The findings showed that the analytic procedure under study can reliably reduce data in the nature of (1) sinusoids in noise, (2) asymmetric but periodic waves in noise, and (3) sinusoids in noise with substantial gaps in the data. The program was also able to analyze narrow-band noise well, but with increased interpretational problems. The procedure was shown to be a powerful technique for analysis of periodicities, in comparison with classical spectrum analysis techniques. However, informed use of the stepwise procedure nevertheless requires some background of knowledge concerning characteristics of the biological processes under study.

Benignus, V. A.↗
NASA NTRS1998

Tropical Tropospheric Ozone (TTO) Maps from Nimbus 7 and Earth-Probe TOMS by the Modified-Residual Method: Validation, Evaluation and Trends based on Atlantic Regional Time Series - 1

The well-known wave-one pattern seen in tropical total ozone [Shiotani, 1992; Ziemke et al., 1996, 1998] has been used to develop a modified-residual (MR) method for retrieving time-averaged stratospheric ozone and tropospheric ozone column amount from TOMS (Total Ozone Mapping Spectrometer) over the 14 complete calendar years of Nimbus 7 observations (1979-1992) and from TOMS on the Earth-Probe (1996-present) and ADEOS platforms (1996- 1997). Nine- to sixteen-day averaged tropical tropospheric ozone (TTO) maps, validated with ozonesondes, show a seasonality expected from dynamical and chemical influences. The maps may be viewed on a homepage: http://metosrv2.umd.edu/~tropo. Stratospheric column ozone, which is also derived by the modified-residual method, compares well with sondes (to within 6-7 DU) and with stratospheric ozone column derived from other satellites (within 8-10 DU). Validation of the TTO time-series is presently limited to ozonesonde comparisons with Atlantic stations and sites on the adjacent continents (Ascension Island, Natal, Brazil; Brazzaville); for the sounding periods, TTO at all locations agrees with the sonde record to +/-7 DU. TTO time-series and the magnitude of the wave-one pattern show ENSO signals in the strongest El Nifio periods from 1979-1998. From 12degN and 12degS, zonally averaged tropospheric ozone shows no significant trend from 1980-1990. Trends are also not significant during this period in localized regions, e.g. from just west of South America across to southern Africa. This is consistent with the ozonesonde record at Natal, Brazil (the only tropical ozone data publicly available for the 1980's), which shows a not statistically significant increase. The lack of trend in tropospheric ozone agrees with a statistical analysis based on another method for deriving TTO from TOMS, the so-called Convective-Cloud-Differential approach of Ziemke et al. [1998].

Thompson, Anne M.↗
NASA NTRS1999

Psychological changes in hundred-day remote Antarctic field groups

Psychological adaptation to extreme environments has been examined from several perspectives. In this study, two Australian teams, each consisting of six male crew members, completed computer-administered questionnaires twice weekly during 100-day traverses around the Lambert Glacier Basin, Antarctica. Only small trends were noted when data were aggregated at the group level, which is consistent with the findings of others. Data were then analyzed using pooled time-series regression. These analyses incorporated personality characteristics, environmental factors, and interpersonal factors as predictors of Group Tensions, Personal Morale, Emotional State, Cognitive Readiness, and the Team's Work Life. Most of the psychological discomfort and problems that occurred appeared to be within the individual or between individuals. They did not affect all members of the group equally.

NASA Discipline Space Human Factors↗
NASA NTRS1998

Ice Surface Elevation Changes in East Antarctica from Satellite Altimetry

Estimates of the overall mass balance and seasonal and inter-annual variations in the surface mass balance are obtainable from time-series of ice surface elevations measured by satellite altimetry. Beginning in 2001, NASA's ICESat laser altimeter and lidar mission will significantly improve the range accuracy, the orbit accuracy, and the spatial coverage for measurement of ice sheet elevations (to 86 S) , as compared to previous radar altimeters designed for ocean measurements The radar altimeters on Seasat and Geosat provided ice sheet measurements to 72 S, and on ERS-1 and ERS-2 to 81 S. Although radar altimetry has significant limitations in coverage (due to loss of tracking) and accuracy over sloping surfaces, information on ice-sheet surface-elevation changes has been derived for parts of Antarctica. Recently, the accuracy of the ice measurements by Seasat (3 months of 1978) and Geosat (1985 to 1989) have been improved by new calculations of the satellite orbit heights and other altimeter corrections. Residual orbit errors and inter-satellite biases are evaluated by crossover analysis and by global adjustments to an ocean surface derived from altimeter data. The standard deviation of the orbit error is less than 9 cm, and the long-term trend in the error appears to be less than 1 cm/yr. Orbit errors can be further reduced by adjustment to the ocean surface, but false signals of several cm/yr may be also introduced by the adjustments. These false signals are caused mainly by residual errors in the altimeter corrections over the ocean, and secondary by real changes in the ocean surface elevation. Maps of ice sheet elevation changes north of 72 S are derived from Seasat-Geosat crossovers and from 4.5 years of Geosat crossovers. A notable ice thinning rate of about 50 cm/yr is found at elevations below 2200 meters between 70 and 72 S to the East of the Amery ice shelf, in both the Seasat-Geosat and Geosat-Geosat time intervals Above 2200 meters, to the ridge around 95 E, the thinning is about 10 to 20 cm/yr. For the Seasat/Geosat interval, a thickening is noted on the area East of the ridge between about 95 E and 115 E. Preliminary results from analysis of ERS-1 and ERS-2 radar altimeter data are also described.

Zwally, H. Jay↗
NASA NTRS1971

A real-time statistical time-series analyzer

Device extracts average frequency of human speech and produces second, third, and fourth moments of instantaneous frequency about this average. It operates on electrical time representation of input signal, performs statistical analysis on zero-crossing of almost any signal, and does not require specialized personnel to operate it.

Stewart, C. H.↗
NASA NTRS1989

An introduction to chaotic and random time series analysis

The origin of chaotic behavior and the relation of chaos to randomness are explained. Two mathematical results are described: (1) a representation theorem guarantees the existence of a specific time-domain model for chaos and addresses the relation between chaotic, random, and strictly deterministic processes; (2) a theorem assures that information on the behavior of a physical system in its complete state space can be extracted from time-series data on a single observable. Focus is placed on an important connection between the dynamical state space and an observable time series. These two results lead to a practical deconvolution technique combining standard random process modeling methods with new embedded techniques.

Scargle, Jeffrey D.↗
NASA NTRS1989

Wavelet analysis introduction and application to radar scattering from water waves

Double-parameter expansions, leading to an instantaneous multiscale analysis, are used to obtain time-frequency graphs from time-series data for interpretation of scatterometer response to sea surface geometry. This method is used to define, as well as possible, one-dimensional signal input (elevation and slope). However, some important fundamental parameters, such as the asymmetric development of short scales in crests and troughs, the long-wave amplitude modulation, the different zero-crossings, and so forth, are easily extracted from the wavelet images.

Chapron, B.↗
NASA NTRS1994

Time-series photometric spot modeling. 2: Fifteen years of photometry of the bright RS CVn binary HR 7275

We present a time-dependent spot modeling analysis of 15 consecutive years of V-band photometry of the long-period (P(sub orb) = 28.6 days) RS CVn binary HR 7275. This baseline in time is one of the longest, uninterrupted intervals a spotted star has been observed. The spot modeling analysis yields a total of 20 different spots throughout the time span of our observations. The distribution of the observed spot migration rates is consistent with solar-type differential rotation and suggests a lower limit of the differential-rotation coefficient of 0.022 +/-0.004. The observed, maximum lifetime of a single spot (or spot group) is 4.5 years, the minimum lifetime is approximately one year, but an average spot lives for 2.2 years. If we assume that the mechanical shear by differential rotation sets the upper limit to the spot lifetime, the observed maximum lifetime in turn sets an upper limit to the differential-rotation coefficient, namely 0.04 +/- 0.01. This would be differential rotation just 5 to 8 times less than the solar value and one of the strongest among active binaries. We found no conclusive evidence for the existence of a periodic phenomenon that could be attributed to a stellar magnetic cycle.

Strassmeier, K. G.↗