Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “time integrator”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS2012

Neutrino Analysis of the September 2010 Crab Nebula Flare and Time-integrated Constraints on Neutrino Emission From the Crab Using IceCube

We present the results for a search of high-energy muon neutrinos with the IceCube detector in coincidence with the Crab nebula flare reported on September 2010 by various experiments. Due to the unusual flaring state of the otherwise steady source we performed a prompt analysis of the 79-string configuration data to search for neutrinos that might be emitted along with the observed gamma-rays. We performed two different and complementary data selections of neutrino events in the time window of 10 days around the flare. One event selection is optimized for discovery of E(sub nu)(sup -2) neutrino spectrum typical of 1st order Fermi acceleration. A similar event selection has also been applied to the 40-string data to derive the time-integrated limits to the neutrino emission from the Crab [35]. The other event selection was optimized for discovery of neutrino spectra with softer spectral index and TeV energy cut-offs as observed for various galactic sources in gamma-rays. The 90% CL best upper limits on the Crab flux during the 10 day flare are 4.73 x 10(exp -11) per square centimeter per second TeV (sup -1) for an E(sub nu) (sup -2) neutrino spectrum and 2.50 x 10(exp -10) per square centimeter per second TeV(sup -1) for a softer neutrino spectra of E(sub nu)(sup -2.7), as indicated by Fermi measurements during the flare. IceCube has also set a time-integrated limit on the neutrino emission of the Crab using 375.5 days of livetime of the 40-string configuration data. This limit is compared to existing models of neutrino production from the Crab and its impact on astrophysical parameters is discussed. The most optimistic predictions of some models are already rejected by the IceCube neutrino telescope with more than 90% CL.

Stamatikos, M.↗
NASA NTRS1990

Radar and satellite area-time-integral techniques for estimating convective precipitation

The application of the area-time-integral (ATI) method (Doneaud et al, 1984) to radar and satellite measurements is reviewed. Results are presented from the calculation of ATI values from radar observations based on low-elevation-angle and low-altitude CAPPI data. Also, results from a satellite ATI calculation using IR images from a GEO platform are given. The results suggest that the radar and satellite applications produce good consistency.

Smith, Paul L.↗
DOE OSTI2025

Advancing simulations of coupled electron and phonon nonequilibrium dynamics using adaptive and multirate time integration

Electronic structure calculations in the time domain provide a deeper understanding of nonequilibrium dynamics in materials. The real-time Boltzmann equation (rt-BTE), used in conjunction with accurate interactions computed from first principles, has enabled reliable predictions of coupled electron and lattice dynamics. However, the timescales and system sizes accessible with this approach are still limited, with two main challenges being the different timescales of electron and phonon interactions and the cost of computing collision integrals. As a result, only a few examples of these calculations exist, mainly for two-dimensional (2D) materials. Here we leverage adaptive and multirate time integration methods to achieve a major step forward in solving the coupled rt-BTEs for electrons and phonons. Relative to conventional (non-adaptive) time-stepping, our approach achieves a 10x speedup for a target accuracy, or greater accuracy by 3–6 orders of magnitude for the same computational cost, enabling efficient calculations in both 2D and bulk materials. This efficiency is showcased by computing the coupled electron and lattice dynamics in graphene up to ~100 ps, as well as modeling ultrafast lattice dynamics and thermal diffuse scattering maps in bulk materials (silicon and gallium arsenide). In addition to improved efficiency, our adaptive method can resolve the characteristic rates of different physical processes, thus naturally bridging different timescales. This enables simulations of longer timescales and provides a framework for modeling multiscale dynamics of coupled degrees of freedom in matter. Our work opens new opportunities for quantitative studies of nonequilibrium physics in materials, including driven lattice dynamics with phonons coupled to electrons, spin, and other degrees of freedom.

Yao, Jia [California Institute of Technology (CalT↗
DOE OSTI2025

Moment-based adaptive time integration for thermal radiation transport

Here, in this paper we develop a framework for moment-based adaptive time integration of deterministic multifrequency thermal radiation transpot (TRT). We generalize our recent semi-implicit-explicit (IMEX) integration framework for gray TRT to multifrequency TRT, and also introduce a semi-implicit variation that facilitates higher-order integration of TRT, where each stage is implicit in all components except opacities. To appeal to the broad literature on adaptivity with Runge–Kutta methods, we derive new embedded methods for four asymptotic preserving IMEX Runge–Kutta schemes we have found to be robust in our previous work on TRT and radiation hydrodynamics. We then use a moment-based high-order-low-order representation of the transport equations. Due to the high dimensionality, memory is always a concern in simulating TRT. We form error estimates and adaptivity in time purely based on temperature and radiation energy, for a trivial overhead in computational cost and memory usage compared with the base second order integrators. We then test the adaptivity in time on the tophat and Larsen problem, demonstrating the ability of the adaptive algorithm to naturally vary the timestep across 4–5 orders of magnitude, ranging from the dynamical timescales of the streaming regime to the thick diffusion limit.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS2001

Time Integration Schemes for the Unsteady Navier-stokes Equations

The efficiency and accuracy of several time integration schemes are investigated for the unsteady Navier-Stokes equations. This study focuses on the efficiency of higher-order Runge-Kutta schemes in comparison with the popular Backward Differencing Formulations. For this comparison an unsteady two-dimensional laminar flow problem is chosen, i.e., flow around a circular cylinder at Re = 1200. It is concluded that for realistic error tolerances (smaller than 10(exp -1)) fourth-and fifth-order Runge-Kutta schemes are the most efficient. For reasons of robustness and computer storage, the fourth-order Runge-Kutta method is recommended. The efficiency of the fourth-order Runge-Kutta scheme exceeds that of second-order Backward Difference Formula by a factor of 2.5 at engineering error tolerance levels (10(exp -1) to 10(exp -2)). Efficiency gains are more dramatic at smaller tolerances.

Bijl, Hester↗
NASA NTRS1990

Estimation of convective rain volumes utilizing the are-time-integral technique

Interest in the possibility of developing useful estimates of convective rainfall with Area-Time Integral (ATI) methods is increasing. The basis of the ATI technique is the observed strong correlation between rainfall volumes and ATI values. This means that rainfall can be estimated by just determining the ATI values, if previous knowledge of the relationship to rain volume is available to calibrate the technique. Examples are provided of the application of the ATI approach to gage, radar, and satellite measurements. For radar data, the degree of transferability in time and among geographical areas is examined. Recent results on transferability of the satellite ATI calculations are presented.

Johnson, L. Ronald↗
DOE OSTI2021

Flow-driven spectral chaos (FSC) method for long-time integration of second-order stochastic dynamical systems

For decades, uncertainty quantification techniques based on the spectral approach have been demonstrated to be computationally more efficient than the Monte Carlo method for a wide variety of problems, particularly when the dimensionality of the probability space is relatively low. The time-dependent generalized polynomial chaos (TD-gPC) is one such technique that uses an evolving orthogonal basis to better represent the stochastic part of the solution space in time. Here in this paper, we present a new numerical method that uses the concept of enriched stochastic flow maps to track the evolution of the stochastic part of the solution space in time. The computational cost of this proposed flow-driven stochastic chaos (FSC) method is an order of magnitude lower than TD-gPC for comparable solution accuracy. This gain in computational cost is realized because, unlike most existing methods, the number of basis vectors required to track the stochastic part of the solution space does not depend upon the dimensionality of the probability space. Four representative numerical examples are presented to demonstrate the performance of the FSC method for long-time integration of second-order stochastic dynamical systems in the context of stochastic dynamics of structures.

FSC↗
DOE OSTI2025

Measurement of the time-integrated 𝐶⁢𝑃 asymmetry in 𝐷 0 → 𝜋 0 ⁢𝜋 0 decays at Belle II

We measure the time-integrated 𝐶⁢𝑃 asymmetry, 𝐴 𝐶⁢𝑃 , in 𝐷 0 → 𝜋 0 ⁢𝜋 0 decays reconstructed in 𝑒 + ⁢𝑒 − → $𝑐⁢\bar{𝑐}$ events collected by Belle II during 2019–2022. The data corresponds to an integrated luminosity of 428 fb −1 . The 𝐷 0 decays are required to originate from the flavor-conserving 𝐷 *+ → 𝐷 0 ⁢𝜋 + decay to determine the charm flavor at production time. Control samples of 𝐷 0 → 𝐾 − ⁢𝜋 + decays, with or without an associated pion from a 𝐷 *+ decay, are used to correct for detection asymmetries. The result, 𝐴 𝐶⁢𝑃 ⁡(𝐷 0 → 𝜋 0 ⁢𝜋 0 ) = (0.30 ± 0.72 ± 0.20)%, where the first uncertainty is statistical and the second systematic, is consistent with 𝐶⁢𝑃 symmetry.

CP violation↗
DOE OSTI2023

Additive Polynomial Time Integrators, Part I: Framework and Fully Implicit-Explicit Collocation Methods

In this paper we generalize the polynomial time integration framework to additively partitioned initial value problems. The framework we present is general and enables the construction of many new families of additive integrators with arbitrary order-of-accuracy and varying degree of implicitness. In this first work, we focus on a new class of implicit-explicit polynomial block methods that are based on fully implicit Runge–Kutta methods with Radau nodes and that possess high stage order. Here, we show that the new fully implicit-explicit (FIMEX) integrators have improved stability compared to existing IMEX Runge–Kutta methods, while also being more computationally efficient due to recent developments in preconditioning techniques for solving the associated systems of nonlinear equations. For PDEs on periodic domains where the implicit component is trivial to invert, we will show how parallelization of the right-hand side evaluations can be exploited to obtain significant speedup compared to existing serial IMEX Runge–Kutta methods. For parallel (in space) finite element discretizations, the new methods can achieve orders of magnitude better accuracy than existing IMEX Runge–Kutta methods and/or achieve a given accuracy several times times faster in terms of computational runtime.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Multiphysics Time-Integration for Turbulent Combustion at the Exascale

Turbulent reacting flow systems are often modeled with coupled time-dependent partial differential equations (PDEs). Solving such equations can easily tax the world's largest supercomputers. One pragmatic strategy for attacking such problems is to split the PDEs into components that can more easily be solved in isolation. This generic operator-splitting strategy leads to a set of ordinary differential equations (ODEs) that need to be solved as part of an "outer-loop" time-stepping approach. In many combustion applications, the ODEs to be solved can be very stiff, exhibiting timescales that span many orders of magnitude. The SUNDIALS library provides a plethora of robust time integration algorithms for solving these ODEs on exascale-capable computing hardware, yet for many complex applications (such multicomponent fuels or emissions predictions), the chemical models remain too complex to solve using reasonable resources. The Quasi-Steady State Approximation (QSSA) can be an effective tool for reducing the size and stiffness of the simulations. In this talk, I will discuss the use of the SUDIALS library of ODE solvers together with automatic code generation tools to solve complex turbulent reacting flow problems using QSSA models.

chemistry↗
DOE OSTI2022

Solving Coupled Surface and Subsurface Flow with Multirate Time Integration [Slides]

This report details an end of summer internship. The report lists the objective, "Add more multirate time integration methods to Amanzi" and concludes that, "Multirate methods can be used to speed up simulations and to get higher orders of accuracy", and "Coupled surface and subsurface simulations could benefit from using multirate schemes".

47 OTHER INSTRUMENTATION↗
NASA NTRS1993

Further development towards a new virtual-pulse time integral methodology for general nonlinear transient thermal analysis

New developments describing the theoretical basis towards an effective virtual-pulse time integral procedure are presented for general nonlinear transient heat transfer problems. To validate the proposed methodology of computation, numerical test examples are given and comparisons are drawn with the implicit second-order accurate Crank-Nicolson technique. The proposed method shows superior or improved accuracy and stability characteristics for the models tested.

Tamma, K. K.↗
NASA NTRS1993

On the generalized VIP time integral methodology for transient thermal problems

The paper describes the development and applicability of a generalized VIrtual-Pulse (VIP) time integral method of computation for thermal problems. Unlike past approaches for general heat transfer computations, and with the advent of high speed computing technology and the importance of parallel computations for efficient use of computing environments, a major motivation via the developments described in this paper is the need for developing explicit computational procedures with improved accuracy and stability characteristics. As a consequence, a new and effective VIP methodology is described which inherits these improved characteristics. Numerical illustrative examples are provided to demonstrate the developments and validate the results obtained for thermal problems.

Mei, Youping↗
NASA NTRS1987

The area-time-integral technique to estimate convective rain volumes over areas applied to satellite data - A preliminary investigation

The use of the area-time-integral (ATI) technique, based only on satellite data, to estimate convective rain volume over a moving target is examined. The technique is based on the correlation between the radar echo area coverage integrated over the lifetime of the storm and the radar estimated rain volume. The processing of the GOES and radar data collected in 1981 is described. The radar and satellite parameters for six convective clusters from storm events occurring on June 12 and July 2, 1981 are analyzed and compared in terms of time steps and cluster lifetimes. Rain volume is calculated by first using the regression analysis to generate the regression equation used to obtain the ATI; the ATI versus rain volume relation is then employed to compute rain volume. The data reveal that the ATI technique using satellite data is applicable to the calculation of rain volume.

Doneaud, Andre A.↗
DOE OSTI2026

New Time Integrators and Capabilities in SUNDIALS Versions 6.2.0-7.4.0

SUNDIALS is a well-established numerical library that provides robust and efficient time integrators and nonlinear solvers. This article overviews several significant improvements and new features added over the last 3 years to support scientific simulations run on high-performance computing systems. Notably, three new classes of one-step methods have been implemented: low storage Runge–Kutta, symplectic partitioned Runge–Kutta, and operator splitting. In addition, we describe new timestep adaptivity support for multirate methods, adjoint sensitivity analysis capabilities for explicit Runge–Kutta methods, additional options for Anderson acceleration in nonlinear solvers, and improved error handling and logging.

Computer science↗
DOE OSTI2025

Measurement of the time-integrated C P asymmetry in D 0 → K S 0 K S 0 decays using Belle and Belle II data

We measure the time-integrated C P asymmetry in D 0 → K S 0 K S 0 decays reconstructed in e + e − → c c ¯ events collected by the Belle and Belle II experiments. The corresponding data samples have integrated luminosities of 980 and 428 fb − 1 , respectively. The D 0 decays are required to originate from the D * + → D 0 π + decay, which determines the charm flavor at production time. A control sample of D 0 → K + K − decays is used to correct for production and detection asymmetries. The result, ( − 1.4 ± 1.3 ( stat ) ± 0.1 ( syst ) ) % , is consistent with previous determinations and with C P symmetry. Published by the American Physical Society 2025

Adachi, I. (ORCID:0000000322870173)↗
DOE OSTI2023

A framework for multirate time integration of interface-coupled problems

The research described here was performed as part of the DOE SciDAC project Coupling Approaches for Next Generation Architectures (CANGA). A framework was developed for the derivation of novel algorithms for the multirate time integration of two-component systems coupled across an interface between spatial domains. The multirate aspect means that different time steps are allowed by each component integrator. The framework provides a way to construct multirate integrators with desirable properties related to stability, accuracy and preservation of system invariants. This report describes the framework and summarizes the major results, examples and research products.

97 MATHEMATICS AND COMPUTING↗