Synthesis And Processing Of Metalorganic Hf And Zr Precursors For The Deposition Of UHTC Films & Analysis Of Thermal Oxidation Using Advanced XPS
Explore the source record for details and available documents.
Boissiere, Jacob Daniel↗
SEARCH · Engineering Papers
Results for “thermal oxide”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Positive and Negative Ion Motion in Thermal Oxide on Silicon by Radiochemical and MOS ANALYSIS
Metal-oxide-silicon capacitor and radiochemical analyses of anion in sodium contamination failure mode
SODIUM BROMIDE↗
Surface protection of graphite fabric/PMR-15 composites subjected to thermal oxidation
Graphite fabric/PMR-15 laminates develop matrix cracks during long-term exposure in air at temperatures in the range of 500 to 600 F. This study was performed to demonstrate the effectiveness of incorporating graphite mat surface plies as a means of reducing the developing of matrix cracks. Celion 3000 graphite fabric/PMR-15 laminates were fabricated with graphite or graphite mat/325-mesh boron powder surface plies. Laminates without mat surface plies were also fabricated for control purposes. Composite flexural strength, flexural modulus, and interlaminar shear strength were determined at 288 C before and after long-term exposure (up to 1500 hr) in air at 316 C. The results of this study showed that the incorporation of graphite mat surface plies reduces matrix cracking and improves the elevated temperature mechanical property retention characteristics of the composites.
Hanson, M. P.↗
The preparation of new perfluoroether fluids exhibiting excellent thermal-oxidative stabilities
A series of low molecular weight perfluoroalkylethers (PFAE) were synthesized by direct fluorination. Viscosity-temperature properties and oxidation stabilities were determined. Viscosity-temperature correlations indicated that increases in branching and increases in the size of the branching substituent caused a deterioration in viscometric properties (i.e., an increase in ASTM slope). In addition, increasing the ratio of carbon to oxygen in these compounds also increased the ASTM slope. Preliminary oxidation stability tests indicated that highly branched PFAE fluids. (i.e., those containing quaternary carbons) may be less stable than either those containing a single trifluoromethyl pendant group or those containing no branching at all.
Jones, W. R., Jr.↗
Fuel thermal oxidation stability research
Explore the source record for details and available documents.
Hazlett, R. N.↗
The preparation of new perfluoro ether fluids exhibiting excellent thermal-oxidative stabilities
A series of low molecular weight perfluoroalkyl ethers (PFAEs) were synthesized by direct fluorination. Viscosity-temperature properties and oxidation stabilities were determined. Viscosity-temperature correlations indicated that increases in branching and increases in the size of the branching substituent caused a deterioration in viscometric properties (i.e., an increase in ASTM slope). In addition, increasing the ratio of carbon to oxygen in these compounds also increased the ASTM slope. Preliminary oxidation stability measurements indicated that highly branched PFAE fluids (i.e., those containing quaternary carbons) may be less stable than either those containing a single trifluoromethyl pendant group or those containing no branching at all.
Jones, William R., Jr.↗
Effect of Metal Alloys, Degradation Inhibitors, Temperatures on Thermal Oxidative Stability of CF3O(CF2O)(sub x)(CF2O)(sub y)CF3 Fluids
Degradation-promoting action of a series of ferrous and titanium alloys on CF3O(CF2O)(sub x)(CF2-CF2O)(sub y)CF3-based Z25 fluids and the inhibition effectiveness of several classes of additives were investigated. Four types of additives-phosphines, phosphates, phospha-s-triazines, and diphosphatetraazacyclooctatetraene-were studied in two batches of Z25 fluid, P28 and P151. In the absence of inhibitors, titanium alloys were more detrimental than the ferrous metals, but the additives were more effective in the presence of titanium alloys. Phosphate esters totally inhibited the decomposition of P151 at 330 C over 24 h in both types of alloys. The other additives were effective at lower temperatures. The responsiveness of fluid to an additive was found to be batch dependent.
Jones, William R., Jr.↗
Graphite Sheet Coating for Improved Thermal Oxidative Stability of Carbon Fiber Reinforced/PMR-15 Composites
Expanded graphite was compressed into graphite sheets and used as a coating for carbon fiber reinforced PMR-15 composites. BET analysis of the graphite indicated an increase in graphite pore size on compression, however the material was proven to be an effective barrier to oxygen when prepegged with PMR-15 resin. Oxygen permeability of the PMR-15/graphite was an order of magnitude lower than the compressed graphite sheet. By providing a barrier to oxygen permeation, the rate of oxidative degradation of PMR-15 was decreased. As a result, the composite thermo-oxidative stability increased by up to 25%. The addition of a graphite sheet as a top ply on the composites yielded little change in the material's flexural strength or interlaminar shear strength.
Campbell, Sandi↗
Moisture-Induced Delamination Video of an Oxidized Thermal Barrier Coating
PVD TBC coatings were thermally cycled to near-failure at 1150 C. Normal failure occurred after 200 to 300 1-hr cycles with only moderate weight gains (0.5 mg/sq cm). Delamination and buckling was often delayed until well after cooldown (desktop spallation), but could be instantly induced by the application of water drops, as shown in a video clip which can be viewed by clicking on figure 2 of this report. Moisture therefore plays a primary role in delayed desktop TBC failure. Hydrogen embrittlement is proposed as the underlying mechanism.
Smialek, James L.↗
Moisture-Induced Delamination Video of an Oxidized Thermal Barrier Coating
PVD TBC coatings were thermally cycled to near-failure at 1150 C. Normal failure occurred after 200-300 1-hr cycles with only moderate weight gains (0.5 mg/cm2). Delamination and buckling was often delayed until well after cooldown (desktop spallation), but could be instantly induced by the application of water drops, as shown in an accompanying video-recording. Moisture therefore plays a primary role in delayed desktop TBC failure. Hydrogen embrittlement is proposed as the underlying mechanism.
Smialek, James L.↗
Thermal expansion of yttrium oxide and of magnesium oxide with yttrium oxide
Thermal expansion of yttrium oxide and of magnesium oxide with yttrium oxide
YTTRIUM OXIDE↗
Thermal expansion of nickel oxide.
Thermal expansion of polycrystalline nickel oxide in oxygen atmosphere with 5 percent nitrogen to 1930 degrees C, noting grain size
HIGH TEMPERATURE AIR↗
Thermal expansion mismatch and oxidation in thermal barrier coatings
Thermal barrier coatings (TBC) for advanced gas turbine blades have been under intensive development during the last several years. This investigation is intended to achieve a clearer understanding of the mechanical behavior of plasma sprayed zirconia-yttria TBCs, involving a nickle-chromium-aluminum bond coat. The near term objectives are to study the stress states in a relatively simple model TBC subjected to steady state thermal loading. The resulting thermal expansion mismatch and oxidation have been primary targets for the study. The finite element approach and the effects of thermal mismatch and oxidation are described. A proposed mechanism for oxidation induced coating failure is also presented.
Chang, G. C.↗
Stress generation in thermally grown oxide films
A three dimensional finite element analysis was conducted, using the ANSYS computer program, of the stress state in a thin oxide film thermally formed on a rectangular piece of NiCrAl alloy. The analytical results indicate a very high compressive stress in the lateral directions of the film (approximately 6200 MPa), and tensile stresses in the metal substrate that ranged from essentially zero to about 55 MPa. It was found further that the intensity of the analytically determined average stresses could be approximated reasonably well by the modification of an equation developed previously by Oxx for stresses induced into bodies by thermal gradients.
Kumnick, A. J.↗
Catholyte studies in copper oxide-magnesium thermal cells
Copper oxide-magnesium thermal cells open circuit voltage drop in latter discharge stages, discussing cuprous ion activity at cathode
Thaller, L. H.↗
Thermal emissivity and solar absorptivity of aluminum coated with double layers of aluminum oxide and silicon oxide
Thermal emissivity and solar absorptivity of Al coated with surface layers of aluminum oxide and silicon oxide, describing fabrication techniques and performance measurements
Hass, G.↗
Furnace Cyclic Behavior of Plasma-Sprayed Zirconia-Yttria and Multi-Component Rare Earth Oxide Doped Thermal Barrier Coatings
Ceramic thermal barrier coatings will play an increasingly important role in advanced gas turbine engines because of their ability to enable further increases in engine temperatures. However, the coating performance and durability become a major concern under the increasingly harsh thermal cycling conditions. Advanced zirconia- and hafnia-based cluster oxide thermal barrier coatings with lower thermal conductivity and improved thermal stability are being developed using a high-heat-flux laser-rig based test approach. Although the new composition coatings were not yet optimized for cyclic durability, an initial durability screening of numerous candidate coating materials was carried out using conventional furnace cyclic tests. In this paper, furnace thermal cyclic behavior of the advanced plasma-sprayed zirconia-yttria-based thermal barrier coatings that were co-doped with multi-component rare earth oxides was investigated at 1163 C using 45 min hot cycles. The ceramic coating failure mechanisms were studied by using scanning electron microscopy combined with X-ray diffraction phase analysis after the furnace tests. The coating cyclic lifetime will be discussed in relation to coating phase structures, total dopant concentrations, and other properties.
Zhu, Dongming↗
Effects of Doping on Thermal Conductivity of Pyrochlore Oxides for Advanced Thermal Barrier Coatings
Pyrochlore oxides of general composition, A2B2O7, where A is a 3(+) cation (La to Lu) and B is a 4(+) cation (Zr, Hf, Ti, etc.) have high melting point, relatively high coefficient of thermal expansion, and low thermal conductivity which make them suitable for applications as high-temperature thermal barrier coatings. The effect of doping at the A site on the thermal conductivity of a pyrochlore oxide La2Zr2O7, has been investigated. Oxide powders of various compositions La2Zr2O7, La(1.7)Gd(0.3)Zr2O7, La(1.7)Yb(0.3)Zr2O7 and La(1.7)Gd(0.15)Yb(0.15)Zr2O7 were synthesized by the citric acid sol-gel method. These powders were hot pressed into discs and used for thermal conductivity measurements using a steady-state laser heat flux test technique. The rare earth oxide doped pyrochlores La(1.7)Gd(0.3)Zr2O7, La(1.7)Yb(0.3)Zr2O7 and La(1.7)Gd(0.15)Yb(0.15)Zr2O7 had lower thermal conductivity than the un-doped La2Zr2O7. The Gd2O3 and Yb2O3 co-doped composition showed the lowest thermal conductivity.
Bansal, Narottam P.↗