Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “tar”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Tar-free fuel gas production from high temperature pyrolysis of sewage sludge

Highlights: • High temperature pyrolysis of sewage sludge was efficient for producing tar-free fuel gas. • Complete tar removal and volatile matter release were at elevated temperature of 1300 °C. • Sewage sludge was converted to residual solid with high ash content. • 72.60% of energy conversion efficiency for gas production in high temperature pyrolysis. • Investment and costing for tar cleaning were reduced. - Abstract: Pyrolysis of sewage sludge was studied in a free-fall reactor at 1000–1400 °C. The results showed that the volatile matter in the sludge could be completely released to gaseous product at 1300 °C. The high temperature was in favor of H{sub 2} and CO in the produced gas. However, the low heating value (LHV) of the gas decreased from 15.68 MJ/N m{sup 3} to 9.10 MJ/N m{sup 3} with temperature increasing from 1000 °C to 1400 °C. The obtained residual solid was characterized by high ash content. The energy balance indicated that the most heating value in the sludge was in the gaseous product.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Correlations of the Elemental Compositions of Primary Coal Tar and Char

We report that simulations of large-scale coal combustors rely on accurate submodels to describe the chemical and physical changes in coal during reaction. Typically, researchers use simplified empirical submodels tuned to experimental data to reduce the computational complexity. When data are not readily available, researchers use simplifying assumptions, which can create inaccuracies and biases in a large simulation. One such simplifying assumption in coal research is how to describe the elemental composition of primary pyrolysis products. This paper explores several different empirical model forms to predict the dry, ash-free fractions of C, H, O, N, and S in both the char and the tar, using variables such as parent coal composition, reaction conditions (temperatures and particle residence times), and key coal structural parameters derived from NMR measurements. These model forms were correlated to existing data using a wide range of experimental data using a cross-validation procedure. Since coal structural values can be expensive to measure, several correlations from the literature were used to estimate these values based on information from the proximate and ultimate analyses of the parent coal, including a new correlation for the coal aromaticity. These model forms were tested against a set of measured elemental compositions of tar and char to find the best fit to use in the cross-validation process. Lastly, the best empirical models are presented that predict elemental composition of the coal char and tar after devolatilization.

01 COAL, LIGNITE, AND PEAT↗

Enhanced mesoscale climate projections in TAR and AR5 IPCC scenarios: a case study in a Mediterranean climate (Araucanía Region, south central Chile)

Here, climate change scenarios are computed on a large scale, not accounting for local variations presented in historical data and related to human scale. Based on historical records, we validate a baseline (1962–1990) and correct the bias of A2 and B2 regional projections for the end of twenty-first century (2070–2100) issued from a high resolution dynamical downscaled (using PRECIS mesoscale model, hereinafter DGF-PRECIS) of Hadley GCM from the IPCC 3rd Assessment Report (TAR). This is performed for the Araucanía Region (Chile; 37°–40°S and 71°–74°W) using two different bias correction methodologies. Next, we study high-resolution precipitations to find monthly patterns such as seasonal variations, rainfall months, and the geographical effect on these two scenarios. Finally, we compare the TAR projections with those from the recent Assessment Report 5 (AR5) to find regional precipitation patterns and update the Chilean `projection. To show the effects of climate change projections, we compute the rainfall climatology for the Araucanía Region, including the impact of ENSO cycles (El Niño and La Niña events). The corrected climate projection from the high-resolution dynamical downscaled model of the TAR database (DGF-PRECIS) show annual precipitation decreases: B2 (-19.19 %, -287 ± 42 mm) and A2 (-43.38 %, -655 ± 27.4 mm per year. Furthermore, both projections increase the probability of lower rainfall months (lower than 100 mm per month) to 64.2 and 72.5 % for B2 and A2, respectively.

54 ENVIRONMENTAL SCIENCES↗

Engineering New Catalysts for In-Process Elimination of Tars

The key objective of this project was to develop a new and more efficient methodology for engineering and economically producing optimized robust catalysts for the reduction or elimination of tars in biomass gasification. Whereas current catalyst technology typically disposes thin layers of catalytically-active material onto rigid supports via wet chemistry-based methods, this project investigated novel thermal methods for directly incorporating catalytically active materials onto robust supports as well as novel approaches for incorporating catalytically active materials on and/or within an otherwise inert refractory support material which is then subsequently formed and processed to create a catalytically-active material on all exposed surfaces. Specifically, the focus of this engineered catalyst development was on materials which were derived from, or otherwise related to, olivine-like minerals, due to the inherent attrition resistance and moderate catalytic properties exhibited by natural olivine when used in a fluidized bed biomass gasifier. Task 1 of this project successfully demonstrated the direct thermal impregnation of catalytically-active materials onto an olivine substrate, with the production of a Ni-olivine catalyst. Nickel and nickel oxide were thermally impregnated onto an olivine substrate and when reduced were shown to demonstrate improved catalytic activity over the baseline olivine material and equal the tar-decomposing performance of Ni-olivine catalysts prepared by conventional wet impregnation. Task 2 involved coordination with our subcontracted project partners to further develop and characterize catalyst formulations and to optimize activity and production methods. Within this task, several significant new materials were developed. NexTech Materials developed a sintered ceramic nickel-magnesium-silicate catalyst that demonstrated superb catalytic activity and high resistance to deactivation by H2S. Alfred University developed both supported and integrated (bulk) catalysts via a glass-ceramic processing route which were shown to exhibit excellent catalytic activity and superior resistance to attrition deactivation. With the discovery of these active, robust, glass-based catalysts, and with the permission of the project officer, the investigation of waste-based materials as originally proposed for Task 3 and pilot-scale testing proposed in Task 5 were deferred indefinitely in favor of further investigation of the glass-ceramic based catalyst materials. This choice was justified in part because during FY 2006 and through FY 2007, funding restrictions imposed by congressional budget choices significantly reduced funding for DOE biomass-related projects. Funding for this project was limited to what had been authorized which slowed the pace of project work at GTI so that our project partners could continue in their work. Thereafter, project work was allowed to resume and with restored funding, the project continued and concentrated on the development and testing of glass-ceramic catalysts in bulk or supported formats. Work concluded with a final development devoted to increasing the surface area of glass-ceramic catalysts in the form of microspheres. Following that development, project reporting was completed and the project was concluded.

03 NATURAL GAS↗

A Tat-grafted anti-nucleic acid antibody acquires nuclear-localization property and a preference for TAR RNA

Highlights: {yields} We generate '{sub H3}Tat-3D8' by grafting Tat{sub 48-60} peptide to VH CDR of 3D8 scFv antibody. {yields} {sub H3}Tat-3D8 antibody retains nucleic acid binding and hydrolyzing activities. {yields} {sub H3}Tat-3D8 acquires a preference for TAR RNA structure. {yields} Properties of Tat{sub 48-60} is transferred to an antibody via Tat-grafting into a CDR. -- Abstract: The 3D8 single chain variable fragment (3D8 scFv) is an anti-nucleic acid antibody that can hydrolyze nucleic acids and enter the cytosol of cells without reaching the nucleus. The Tat peptide, derived from the basic region of the HIV-1 Tat protein, translocates to cell nuclei and has TAR RNA binding activity. In this study, we generated a Tat-grafted antibody ({sub H3}Tat-3D8) by replacing complementarity-determining region 3 (CDR3) within the VH domain of the 3D8 scFv with a Tat{sub 48-60} peptide (GRKKRRQRRRPPQ). {sub H3}Tat-3D8 retained the DNA-binding and DNA-hydrolyzing activity of the scFv, and translocated to the nuclei of HeLa cells and preferentially recognized TAR RNA. Thus, the properties associated with the Tat peptide were transferred to the antibody via Tat-grafting without loss of the intrinsic DNA-binding and hydrolyzing activities of the 3D8 scFv antibody.

60 APPLIED LIFE SCIENCES↗

Treating tar sands formations with karsted zones

Methods for treating a tar sands formation are described herein. The tar sands formation may have one or more karsted zones. Methods may include providing heat from one or more heaters to one or more karsted zones of the tar sands formation to mobilize fluids in the formation. At least some of the mobilized fluids may be produced from the formation.

Vinegar, Harold J↗

Dual bed reactor for the study of catalytic biomass tars conversion

A dual fixed bed laboratory scale set up has been used to compare the activity of a novel Rh/LaCoO{sub 3}/Al{sub 2}O{sub 3} catalyst to that of dolomite, olivine and Ni/Al{sub 2}O{sub 3}, typical catalysts used in fluidized bed biomass gasification, to convert tars produced during biomass devolatilization stage. The experimental apparatus allows the catalyst to be operated under controlled conditions of temperature and with a real gas mixture obtained by the pyrolysis of the biomass carried out in a separate fixed bed reactor operated under a selected and controlled heating up rate. The proposed catalyst exhibits much better performances than conventional catalysts tested. It is able to completely convert tars and also to strongly decrease coke formation due to its good redox properties. (author)

09 BIOMASS FUELS↗

A review of coal heating value correlations with application to coal char, tar, and other fuels

Accurately measuring a fuel’s heating value is one of the first steps in the classification of a new fuel. Heating values are widely used in coal combustion research and are becoming more useful in other fuel types as well. Many different empirical correlations to predict heating values based on primary organic (CHONS) elemental composition are found in the literature, many of which were originally created to predict heating values of parent coal, and some of which have been extended for biomass. However, no correlations exist for heating values of coal chars and tars. Thirteen literature heating value correlations (10 model forms with 13 unique sets of coefficients) were evaluated for their predictive accuracy of a wide variety of fuel types, including 353 coals. This comparative analysis showed that the predictive capabilities of many of these literature models are very similar for coal-based fuels, with good correlation of coal char heating values. Correlation of coal tar heating values was hampered by the lack of heating value data. The choice of which model to use becomes more important for biomass fuels as well as for more unique fuel types like propellants and explosives, municipal solid waste, etc. Finally, the best model forms for each fuel type are suggested based on several statistical measures of fit.

01 COAL, LIGNITE, AND PEAT↗

Tar Yield and Collection from the Pyrolysis of Large Biomass Particles

Tar yield and collection from the pyrolysis of relatively larg eparticles of biomass are investigated using the model of Miller and Bellan (199b). A variety of feedstocks are considered by varying the ratios of cellulose, hemicellulose and lignin within the biomass. Effects of secondary tar reactions, quenching, temperature, particle size and carrier gas are assessed.

biomass↗

Treating tar sands formations with dolomite

Methods for treating a tar sands formation are described herein. The tar sands formation may include dolomite and hydrocarbons. Methods may include providing heat at less than the decomposition temperature of dolomite from one or more heaters to at least a portion of the formation. At least some of the hydrocarbon fluids are mobilized in the formation. At least some of the hydrocarbon fluids may be produced from the formation.

04 OIL SHALES AND TAR SANDS↗

Creating fluid injectivity in tar sands formations

Methods for treating a tar sands formation are described herein. Methods for treating a tar sands may include heating a portion of a hydrocarbon layer in the formation from one or more heaters located in the portion. The heat may be controlled to increase the permeability of at least part of the portion to create an injection zone in the portion with an average permeability sufficient to allow injection of a fluid through the injection zone. A drive fluid and/or an oxidizing fluid may be provided into the injection zone. At least some hydrocarbons are produced from the portion.

04 OIL SHALES AND TAR SANDS↗

Creating fluid injectivity in tar sands formations

Methods for treating a tar sands formation are described herein. Methods for treating a tar sands may include heating a portion of a hydrocarbon layer in the formation from one or more heaters located in the portion. The heat may be controlled to increase the permeability of at least part of the portion to create an injection zone in the portion with an average permeability sufficient to allow injection of a fluid through the injection zone. A drive fluid and/or an oxidizing fluid may be provided into the injection zone. At least some hydrocarbons including mobilized hydrocarbons are produced from the portion.

04 OIL SHALES AND TAR SANDS↗

Controlling and assessing pressure conditions during treatment of tar sands formations

A method for treating a tar sands formation includes providing heat to at least part of a hydrocarbon layer in the tar sands formation from a plurality of heaters located in the formation. Heat is allowed to transfer from the heaters to at least a portion of the formation. A pressure in the portion of the formation is controlled such that the pressure remains below a fracture pressure of the formation overburden while allowing the portion of the formation to heat to a selected average temperature of at least about 280.degree. C. and at most about 300.degree. C. The pressure in the portion of the formation is reduced to a selected pressure after the portion of the formation reaches the selected average temperature.

04 OIL SHALES AND TAR SANDS↗

Effect of secondary gas-phase reactions (SGR) in pyrolysis of carbon feedstocks for anisotropic carbon materials production – 2: Effects of SGR on tars produced from varying ranks of coal

Herein, this work explores the extent to which secondary gas-phase reactions (SGR) in pyrolysis can be used to modify coal tar chemistries from coals of different ranks in favor of improved anisotropy formation in their respective pitches. Pyrolysis was performed on four different coals of varying bituminous rank (Utah Sufco, Wyoming PRB Black Thunder, Illinois #6, and West Virginia Flying Eagle), with SGR temperatures ranging from 800 to 900° C and nominal SGR gas-phase residence times from 1 to 2.5 s. The oxygen content, aliphatic content, and molecular weight distributions of the coal tar samples were measured to indicate the changes with increasing levels of SGR, and microscopy was also used to measure changes in anisotropy formation in the resulting pitch samples. Generally, for all coals tested, increased levels of pyrolysis SGR led to decreased oxygen and aliphatic content, increased molecular weight sizes, and improved anisotropy formation. However, it was clear that the extent of these property changes depended on the chemistry and rank of the starting coal feedstock. Despite the relatively high rank of the Illinois #6 coal, its respective pitch samples performed poorly in improving anisotropy formation, due to its high sulfur content. The PRB, Sufco, and Flying Eagle coals performed better in their anisotropy formation than Illinois #6, depending on their respective coal ranks. Statistical analysis (analysis of variance, ANOVA) performed on the sample characterization data also suggests that SGR temperature is consistently the most dominant and significant effect on the resulting coal products.

01 COAL, LIGNITE, AND PEAT↗

Extracting Oil From Tar Sands

Recovery of oil from tar sands possible by batch process, using steam produced by solar heater. In extraction process, solar heater provides steam for heating solvent boiler. Boiling solvent removes oil from tar sands in Soxhlet extractor.

Ford, L. B.↗

The Test Analysis Retrieval System (TARS): Meeting the challenges of the network's test processes

The Networks Systems Test Section (GSFC 531.4) is responsible for managing a variety of engineering and operational tests used to assess the status of the Network elements relative to readiness certification for new and ongoing mission support and for performance trending. To conduct analysis of data collected during these tests, to disseminate and share the information, and to catalog and create reports based on the analysis is currently a cumbersome and inefficient task due primarily to the manual handling of paper products and the inability to easily exchange information between the various Networks elements. The Test Analysis and Retrieval System (TARS) is being implemented to promote concise data analysis, intelligible reporting of test results, to minimize test duplication by fostering a broad sharing of test data, and perhaps most importantly, to provide significantly improved response to the Network's internal and external customers. This paper outlines the intended application, architecture, and benefits of the TARS.

Stelmaszek, Robert L.↗

Method of producing drive fluid in situ in tar sands formations

Methods of treating a tar sands formation are described herein. Methods for treating a tar sands may include providing heat to at least part of a hydrocarbon layer in the formation from one or more heaters located in the formation. The heat may be allowed to transfer from the heaters to at least a portion of the formation such that a drive fluid is produced in situ in the formation. The drive fluid may move at least some mobilized, visbroken, and/or pyrolyzed hydrocarbons from a first portion of the formation to a second portion of the formation. At least some of the mobilized, visbroken, and/or pyrolyzed hydrocarbons may be produced from the formation.

Mudunuri, Ramesh Raju↗

Creating and maintaining a gas cap in tar sands formations

Methods for treating a tar sands formation are disclosed herein. Methods for treating a tar sands formation may include providing heat to at least part of a hydrocarbon layer in the formation from one or more heaters located in the formation. Pressure may be allowed to increase in an upper portion of the formation to provide a gas cap in the upper portion. At least some hydrocarbons are produced from a lower portion of the formation.

Vinegar, Harold J↗