Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “systems analysis programs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Nuclear Engine System Simulation (NESS) version 2.0

The topics are presented in viewgraph form and include the following; nuclear thermal propulsion (NTP) engine system analysis program development; nuclear thermal propulsion engine analysis capability requirements; team resources used to support NESS development; expanded liquid engine simulations (ELES) computer model; ELES verification examples; NESS program development evolution; past NTP ELES analysis code modifications and verifications; general NTP engine system features modeled by NESS; representative NTP expander, gas generator, and bleed engine system cycles modeled by NESS; NESS program overview; NESS program flow logic; enabler (NERVA type) nuclear thermal rocket engine; prismatic fuel elements and supports; reactor fuel and support element parameters; reactor parameters as a function of thrust level; internal shield sizing; and reactor thermal model.

Pelaccio, Dennis G.↗

The NASA aircraft noise prediction program improved propeller analysis system

The improvements and the modifications of the NASA Aircraft Noise Prediction Program (ANOPP) and the Propeller Analysis System (PAS) are described. Comparisons of the predictions and the test data are included in the case studies for the flat plate model in the Boundary Layer Module, for the effects of applying compressibility corrections to the lift and pressure coefficients, for the use of different weight factors in the Propeller Performance Module, for the use of the improved retarded time equation solution, and for the effect of the number grids in the Transonic Propeller Noise Module. The DNW tunnel test data of a propeller at different angles of attack and the Dowty Rotol data are compared with ANOPP predictions. The effect of the number of grids on the Transonic Propeller Noise Module predictions and the comparison of ANOPP TPN and DFP-ATP codes are studied. In addition to the above impact studies, the transonic propeller noise predictions for the SR-7, the UDF front rotor, and the support of the enroute noise test program are included.

Nguyen, L. Cathy↗

Computer programs simplify optical system analysis

The optical ray-trace computer program performs geometrical ray tracing. The energy-trace program calculates the relative monochromatic flux density on a specific target area. This program uses the ray-trace program as a subroutine to generate a representation of the optical system.

Source record↗

Modern Numerical Methods for Classical Sampled System Analysis-SAMSAN

SAMSAN aids control-system analyst by providing self-consistent set of computer algorithms that support large-order control-system design and evaluation studies, with emphasis placed on sampled system analysis. Program provides set of algorithms readily integrated for solving control-system problems.

Frisch, H. P.↗

Description of a user-oriented geographic information system - The resource analysis program

This paper describes the Resource Analysis Program, an applied geographic information system. Several applications are presented which utilized soil, and other natural resource data, to develop integrated maps and data analyses. These applications demonstrate the methods of analysis and the philosophy of approach used in the mapping system. The applications are evaluated in reference to four major needs of a functional mapping system: data capture, data libraries, data analysis, and mapping and data display. These four criteria are then used to describe an effort to develop the next generation of applied mapping systems. This approach uses inexpensive microcomputers for field applications and should prove to be a viable entry point for users heretofore unable or unwilling to venture into applied computer mapping.

Tilmann, S. E.↗

Space Shuttle program communication and tracking systems interface analysis

The Space Shuttle Program Communications and Tracking Systems Interface Analysis began April 18, 1983. During this time, the shuttle communication and tracking systems began flight testing. Two areas of analysis documented were a result of observations made during flight tests. These analyses involved the Ku-band communication system. First, there was a detailed analysis of the interface between the solar max data format and the Ku-band communication system including the TDRSS ground station. The second analysis involving the Ku-band communication system was an analysis of the frequency lock loop of the Gunn oscillator used to generate the transmit frequency. The stability of the frequency lock loop was investigated and changes to the design were reviewed to alleviate the potential loss of data due the loop losing lock and entering the reacquisition mode. Other areas of investigation were the S-band antenna analysis and RF coverage analysis.

Dodds, J. G.↗

Equation modifying program, L219 (EQMOD). Volume 2: Supplemental system design and maintenance document

A digital computer program, L219 (EQMOD), available for execution on the CDC 6600 is described. The program modifies matrices according to card input instructions and prepares magnetic files of matrices suitable for use in the linear systems analysis program (QR) and the random harmonic analysis program L221 (TEV156). The particular field of application of the program is the modification of the theoretical equations of motion and load equations generated in DYLOFLEX by the equation of motion program (L217) and the load equation program (L218), respectively.

Hirayama, M. Y.↗

Space station electrical power distribution analysis using a load flow approach

The space station's electrical power system will evolve and grow in a manner much similar to the present terrestrial electrical power system utilities. The initial baseline reference configuration will contain more than 50 nodes or busses, inverters, transformers, overcurrent protection devices, distribution lines, solar arrays, and/or solar dynamic power generating sources. The system is designed to manage and distribute 75 KW of power single phase or three phase at 20 KHz, and grow to a level of 300 KW steady state, and must be capable of operating at a peak of 450 KW for 5 to 10 min. In order to plan far into the future and keep pace with load growth, a load flow power system analysis approach must be developed and utilized. This method is a well known energy assessment and management tool that is widely used throughout the Electrical Power Utility Industry. The results of a comprehensive evaluation and assessment of an Electrical Distribution System Analysis Program (EDSA) is discussed. Its potential use as an analysis and design tool for the 20 KHz space station electrical power system is addressed.

Emanuel, Ervin M.↗

Coupled base motion response analysis of payload structural systems

Coupled base motion response analysis of payload structural systems is discussed. A systems analysis program is described which by component analysis structural transient response analyses can be completed. The program presents a proven technique, used initially on the Skylab program, which is designed to reduce cost and schedule time on detail structural analyses of structural payload systems. Base motion procedures are employed where critical segments of complex structural systems or components may be analyzed for various load conditions without having to re-establish the entire structural system coupled model properties. The transient response characteristics of a complex structural system are used as a basis for evaluating the transient response of a similar system.

Devers, A. D.↗

Modeling In-Space Aborts for NASA Human Exploration Missions

NASA is developing new capabilities to send humans beyond low Earth orbit (LEO) for the first time in several decades with the new Multi-purpose Crew Vehicle (MPCV) Orion spacecraft and Space Launch System (SLS) launch vehicle. As part of these capabilities, NASA is developing means to terminate missions prior to reaching mission destinations in order to save the crew in the event of critical life-threatening failures. This abort capability exists for both ascent and in-space operations. While the risk associated with ascent aborts has been modeled in detail, less has been done in the area of in-space aborts (e.g. Apollo 13). Recent efforts have started to better assess the risk associated with in-space aborts. This paper will describe these efforts. The in-space abort model described in this paper is part of a larger Cross-Program PRA (XPRA) model of exploration missions planned in the next few years to the vicinity of the Moon. The model consists of linked event trees and fault trees and associated rules built using the Systems Analysis Program for Hands-On Integrated Reliability Evaluations (SAPHIRE) tool. This model structure is being built with flexibility in mind in order to perform risk trades and further expansion of the model.

Bigler, Mark A.↗

Stability of flow over axisymmetric bodies with porous suction strips

Linear triple deck, closed form solutions for mean-flow quantities are developed for axisymmetric incompressible flow past a body with porous strips. The solutions account for upstream influence and are linear superpositions of the flow past the body without suction plus the perturbations due to the suction strips. Flow past the suctionless body is calculated using the Transition Analysis Program System, and a simple linear optimization scheme to determine number, spacing, and mass flow rate through the strips on an axisymmetric body is developed using the linear, triple-deck, closed-form solutions. The theory is demonstrated by predicting optimal strip distributions, and the effect of various adverse pressure-gradient situations on stability is studied.

Nayfeh, A. H.↗

Prediction of ball and roller bearing thermal and kinematic performance by computer analysis

Characteristics of good computerized analysis software are suggested. These general remarks and an overview of representative software precede a more detailed discussion of load support system analysis program structure. Particular attention is directed at a recent cylindrical roller bearing analysis as an example of the available design tools. Selected software modules are then examined to reveal the detail inherent in contemporary analysis. This leads to a brief section on current design computation which seeks to suggest when and why computerized analysis is warranted. An example concludes the argument offered for such design methodology. Finally, remarks are made concerning needs for model development to address effects which are now considered to be secondary but are anticipated to emerge to primary status in the near future.

Pirvics, J.↗

GTOSS: Generalized Tethered Object Simulation System

GTOSS represents a tether analysis complex which is described by addressing its family of modules. TOSS is a portable software subsystem specifically designed to be introduced into the environment of any existing vehicle dynamics simulation to add the capability of simulating multiple interacting objects (via multiple tethers). These objects may interact with each other as well as with the vehicle into whose environment TOSS is introduced. GTOSS is a stand alone tethered system analysis program, representing an example of TOSS having been married to a host simulation. RTOSS is the Results Data Base (RDB) subsystem designed to archive TOSS simulation results for future display processing. DTOSS is a display post processors designed to utilize the RDB. DTOSS extracts data from the RDB for multi-page printed time history displays. CTOSS is similar to DTOSS, but is designed to create ASCII plot files. The same time history data formats provided for DTOSS (for printing) are available via CTOSS for plotting. How these and other modules interact with each other is discussed.

Lang, David D.↗

Comparison of current Shuttle and pre-Challenger flight suit reach capability during launch accelerations

The Challenger accident prompted the creation of a crew escape system which replaced the former Launch Entry Helmet (LEH) ensemble with the current Launch Entry Suit (LES). However, questions were raised regarding the impact of this change on crew reach capability. This study addressed the question of reach capability and its effects on realistic ground-based training for Space Shuttle missions. Eleven subjects performed reach sweeps in both the LEH and LES suits during 1 and 3 Gx acceleration trials in the Brooks AFB centrifuge. These reach sweeps were recorded on videotape and subsequently analyzed using a 3D motion analysis system. The ANOVA procedure of the Statistical Analysis System program was used to evaluate differences in forward and overhead reach. The results showed that the LES provided less reach capability than its predecessor, the LEH. This study also demonstrated that, since there was no substantial difference between 1 and 3 Gx reach sweeps in the LES, realistic Shuttle launch training may be accomplished in ground based simulators.

Bagian, James P.↗