Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “switching ratio”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Biomaterial–Based Solid–Electrolyte Organic Electrochemical Transistors for Electronic and Neuromorphic Applications

In this work a systematic study of biomaterial–based solid–state organic electrochemical transistors (OECTs) is presented in which biogels consisting of gelatin and glycerol, two food–grade materials, are chosen as the model solid electrolyte. Such gels are fundamentally attractive for bioelectronics and wearable applications due to their superior and tunable electrical and mechanical properties, which allow one to fabricate solid–state organic transistors with high ON/OFF ratio and transconductance, possible millisecond–switching speed, and 6–month stability in ambient air. Next, the authors show a good control of the state–retention property of biogel OECTs, demonstrated herein by employing them as artificial synapses with various synaptic functions, such as frequency–based short–term plasticity. This study herein paves the way for the development of biomaterial–based electronics by providing guiding principles for future works that employ biomaterials in OECTs.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Integration of CeO 2 -Based Memristor with Vertically Aligned Nanocomposite Thin Film: Enabling Selective Conductive Filament Formation for High-Performance Electronic Synapses

The CeO 2 -based memristor has attracted significant attention due to its intrinsic resistive switching (RS) properties, large on/off ratio, and great plasticity, making it a promising candidate for artificial synapses. However, significant challenges such as high power consumption and poor device reliability hinder its broad application in neuromorphic microchips. To tackle these issues, in this work, we design a novel bilayer (BL) memristor by integrating a CeO 2 -based memristor with a Co-CeO 2 vertically aligned nanocomposite (VAN) layer and compare it with the single layer (SL) memristor. Preliminary electrical testing reveals that the BL memristor offers a reduced set/reset voltage (~67% lower), a higher on/off ratio (~5 × 10 2 ), enhanced device reliability, and improved device-to-device variation compared to the SL memristor. Insight from COMSOL simulation, coupled with microstructural analysis, provides a comprehensive elucidation on how the VAN layer facilitates the selective conductive filament (CF) formation. Subsequently, the plasticity of the BL memristor is evaluated through long-term potentiation/depression (LTP/LTD), paired-pulse facilitation (PPF), and spike-time-dependent plasticity (STDP). The spiking neural network (SNN) built upon the BL memristor achieves remarkable accuracy (~94%) after only 12 iterations, underscoring its potential for high-performance neural networks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

DualSPHysics-INL

Funded by the DOE's Bioenergy Technology Office through the Feedstock-Conversion Interface Consortium, INL researchers developed this code to model biomass freestock flow in various handling equipment, such as hoppers and augers. Built on top of an existing open-source code DualSPHysics (https://dual.sphysics.org/) , the enrichment includes modification of the mass conservation equation that switching tracking density to void ratio, adding a hypoplastic constitutive law to better capture the flow physics of this type of material and implementing a novel boundary condition that can handle the dynamic contact between material and equipment. All implementation were realized via Nvidia CUDA, so GPU accelaration can be leveraged to signifiantly speed up the computational process.

Jin, Wencheng [Idaho National Laboratory (INL), Id↗
DOE OSTI2024

Development and performance evaluation of active insulation systems using solid-state thermal switches

Traditional building envelopes have passive insulation systems that cannot respond to dynamic changes in the environment. An Active Insulation System (AIS) consists of Active Insulation Materials (AIMs) that dynamically vary the thermal conductivity of the insulation system. Several researchers have evaluated the impact of AIS on building thermal and energy performance by using simulation tools. Up to 70% savings in annual heating and cooling energy and significant reductions in peak demand have been predicted for some climates with wall systems employing AIS. However, materials and assembly development still need a cost-effective product that achieves the required performance. Here, in this study, we present the process of developing an AIS that we will install in a test hut for its performance evaluation. Minimum performance criteria of the AIS system are developed based on R-low/R-high ratio, required time and efficiency to switch states, and cost estimates. The following steps during this study are creating the concept to meet the requirements, predicting the performance via simulations, developing the experimental setup for bench-scale testing, and finally, constructing a full-scale wall assembly and monitoring the performance when exposed to environmental chamber tests. The selected approach uses off-the-shelf products to create an AIS that can switch R-value between 0.98 ft 2 ·°F·h/BTU (0.173 m 2 ·K/W) and 5.81 ft 2 ·°F·h/BTU (1.02 m 2 ·K/W) and have a switching time of less than one minute between R-high and R-low.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2022

Development and Performance Evaluation of of Active Insulation Systems using Solid-State Thermal Switches

Traditional building envelopes have passive insulation systems that cannot respond to dynamic changes in the environment. An Active Insulation System (AIS) consists of Active Insulation Materials (AIMs), which dynamically vary the thermal conductivity of the insulation system. Several researchers have evaluated the impact of AIS on building thermal and energy performance by using simulation tools. Up to 70% savings in annual heating and cooling energy and significant reductions in peak demand have been predicted for some climates with wall systems employing AIS. Sensitivity studies have provided requirements for the AIS properties and control schemes that can lead to those savings. However, materials and assembly development have not yet achieved a cost-effective product that achieves the required performance. In this study, we present the process to develop an AIS that we will install in a test hut for their performance evaluation. Minimum performance criteria of the AIS system are developed based on Rmin/Rmax ratio, required time and efficiency to switch states and cost estimate. The next step carried out during this study is creating the concept to meet the requirements, predicting the performance by simulations, developing the experimental setup for bench-scale testing, and finally, constructing a full-scale wall assembly and monitoring the performance when exposed to natural weather conditions. The selected approach uses off-the-shelf products to create a materials system that can switch R-value between R~=1 ft2·°F·h/BTU (0.18 m2·K/W) and R~=7 ft2·°F·h/BTU (1.23 m2·K/W and have a switching time of less than one minute between R-high and R-low.

Iffa, Emishaw↗
DOE OSTI2022

Modeling Isothermal Reduction of Iron Ore Pellet Using Finite Element Analysis Method: Experiments & Validation

Iron ore pellet reduction experiments were performed with pure hydrogen (H2) and mixtures with carbon monoxide (CO) at different ratios. For direct reduction processes that switch dynamically between reformed natural gas and hydrogen as the reductant, it is important to understand the effects of the transition on the oxide reduction kinetics to optimize the residence time of iron ore pellets in a shaft reactor. Hence, the reduction rates were studied by varying experimental parameters such as the temperature (800, 850 & 900 °C), reactant gas flow rate (100, 150 & 200 cm3/min), pellet size and composition of the reactant gas mixture. The rate of reduction was observed to increase with an increase in temperature and reactant gas flow rate, but it decreased with an increase in pellet size. SEM greyscale analysis was performed to analyze the porosity and phase composition of partially reduced pellets. The porosity of the pellets was observed to increase from 0.3 for unreacted pellet to 0.42 for a completely reduced pellet. Energy-dispersive X-ray spectroscopy (EDAX) analysis was performed to identify the phases observed in the SEM images. The fraction of iron phase was observed to increase from the shell region of the pellet to the core region with an increase in the degree of reduction. A 2D-axisymmetric numerical model was developed on COMSOL Multiphysics, and it was validated using the conversion (X) vs. time curves obtained from each experiment. The model was able to accurately predict the total time needed for the complete conversion of a single iron ore pellet for multiple experiments. Effects of changes in the porosity and tortuosity of the pellet on the model were also studied and the rate of reduction was observed to be sensitive to changes in both porosity and tortuosity. The SEM analysis and the model results show that tortuosity is higher for pellets reduced with H2 than for pellets reduced with H2-CO gas mixtures.

08 HYDROGEN↗
DOE OSTI2021

Thermal stability and magnetization switching of composite free layer with perpendicular magnetic anisotropy

We present a micromagnetic study of a ferromagnetically exchange-coupled composite free layer design for perpendicular magnetic tunnel junctions. The thermal stability factor and critical switching current density depend on the exchange coupling strength and effective anisotropy ratio between the sublayers of the composite free layer. The energy barrier increases with an increase of the exchange coupling strength until it reaches a plateau in the strong-coupling limit. An optimal exchange coupling strength exists that leads to the minimal critical switching current and a significant improvement of the figure of merit defined as the ratio between the energy barrier and critical switching current. This behavior is obtained for smaller device sizes with uniform reversal and larger sizes with domain wall reversal.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Dynamic operation of metal-supported solid oxide electrolysis cells

Symmetric-structure metal-supported solid oxide fuel cells and electrolysis cells (MS-SOFCs, MS-SOECs) offer several advantages over conventional solid oxide cells, including the use of inexpensive materials, high mechanical strength, and rapid ramp-up ability. Aggressive operation of MS-SOCs in fuel cell mode is well-established, including extremely fast start-up, redox tolerance, and imbalanced pressure. Here, we extend dynamic operation to MS-SOCs in SOEC mode with high steam content for both small button cells and a large rectangular cell, including: steam cycling, thermal cycling, redox cycling and power cycling. Steam cycling entailed switching between 3:97 and 50:50 steam:hydrogen ratio. For thermal cycling, the temperature was rapidly varied between 150°C and 700°C for 50 cycles. Redox cycling involved switching the steam side gas between 50 % humidified H 2 and 50 % humidified N 2 for 5 cycles. Power cycling was performed by operating the cell under variable current density, resulting in cell voltage between 1.3V and 2.8V. Degradation rates for each testing strategy were compared to a baseline cell, and found to be similar. In conclusion, the excellent tolerance to dynamic operation increases confidence that MS-SOECs will be compatible with dynamic or intermittent renewable resources.

08 HYDROGEN↗
DOE OSTI2021

Laser Wavelength Shift from Splitters and Switches

The Detonation Science and Technology Group (Q-6) operates several photon Doppler velocimetry (PDV) systems as a diagnostic tool for measuring velocities in the 1–10 km/s range during high explosive (HE) detonation experiments. Q-6 uses “heterodyne” PDV systems that are produced by Traverse Solutions and Instrumentation, LLC (TS&I). These heterodyne systems combine wavelength (WL) tunable source and “reference” lasers with a WL offset of 10–100 pm from each other. Properly setting the source and reference WLs for an experiment can be critical for collecting the desired experimental data. The tunable lasers report WL readings in their control software, but these readings are based on a lookup table from a temperature reading and are not able to be calibrated. Therefore, recent test fire programs that require PDV as a diagnostic have also implemented requirements for monitoring the WL of the tunable lasers using a precision WL meter. To monitor the WL of several PDV lasers without disconnecting any patch fibers form the experimental setup, Q-6 developed a system splitters with a coupling ratio (%) of 99:1 and an optical switch with the switch output going to a single WL meter. A brief experiment was developed to determine if the splitters and/or switch introduced any WL bias into the readings. The purpose of this report is to document the system, the experiment, and its results.

42 ENGINEERING↗
DOE OSTI2020

Push—pull microring-assisted space-and-wavelength selective switch

We introduce a novel design of a space-and-wavelength selective switch based on microring-assisted Mach–Zehnder interferometers. Multiple pairs of overcoupled microring resonators are incorporated as efficient and narrowband phase shifters and are driven in push–pull scheme. We design and demonstrate a 2 × <#comment/> 2 × <#comment/> 2 λ <#comment/> elementary switch block with full spatial and spectral switching capabilities. The switching device’s cross talk suppression and extinction ratio both exceed 21 dB. We measure over 75 GHz optical bandwidth per channel and less than 1.5 dB power penalty at 10 − <#comment/> 9 BER when two 32 Gbps on–off keying signals are loaded simultaneously. This new class of switching elements can further enable compact and high-performance space-and-wavelength selective switch fabrics without the need for wavelength (de)multiplexers or parallel switching planes.

Huang, Yishen (ORCID:0000000278710462)↗
DOE OSTI2021

Sulfurization Engineering of One–Step Low–Temperature MoS 2 and WS 2 Thin Films for Memristor Device Applications

2D materials have been of considerable interest as new materials for device applications. Non-volatile resistive switching applications of MoS 2 and WS 2 have been previously demonstrated; however, these applications are dramatically limited by high temperatures and extended times needed for the large-area synthesis of 2D materials on crystalline substrates. The experimental results demonstrate a one-step sulfurization method to synthesize MoS 2 and WS 2 at 550 °C in 15 min on sapphire wafers. Furthermore, a large area transfer of the synthesized thin films to SiO 2 /Si substrates is achieved. Following this, MoS 2 and WS 2 memristors are fabricated that exhibit stable non-volatile switching and a satisfactory large on/off current ratio (10 3 –10 5 ) with good uniformity. Tuning the sulfurization parameters (temperature and metal precursor thickness) is found to be a straightforward and effective strategy to improve the performance of the memristors. Furthermore, the demonstration of large-scale MoS 2 and WS 2 memristors with a one-step low-temperature sulfurization method with simple strategy to tuning can lead to potential applications such as flexible memory and neuromorphic computing.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Cr-Doped Ge-Core/Si-Shell Nanowire: An Antiferromagnetic Semiconductor

An antiferromagnet offers many important functionalities such as opportunities for electrical control of magnetic domains, immunity from magnetic perturbations, and fast spin dynamics. Introducing some of these intriguing features of an antiferromagnet into a low dimensional semiconductor core–shell nanowire offers an exciting pathway for its usage in antiferromagnetic semiconductor spintronics. Here, using a quantum mechanical approach, we predict that the Cr-doped Ge-core/Si-shell nanowire behaves as an antiferromagnetic semiconductor. In this work, the origin of antiferromagnetic spin alignments between Cr is attributed to the superexchange interaction mediated by the p z orbitals of the Ge atoms that are bonded to Cr. A weak spin–orbit interaction was found in this material, suggesting a longer spin coherence length. The spin-dependent quantum transport calculations in the Cr-doped nanowire junction reveals a switching feature with a high ON/OFF current ratio (~41 times higher for the ON state at a relatively small bias of 0.83 V).

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Two-color x-ray free-electron laser by photocathode laser emittance spoiler

Multispectral x-ray pump-probe experiments call for synchronized two-color free-electron lasers (FEL). This mode often implies a laborious setup or an inefficient use of the undulator. We report on a simple and noninvasive approach tested at SwissFEL for a two-color x-ray delivering almost 60% of the pulse energy compared with a single color. In this new method, a ps UV pulse is overlapped to the photocathode drive laser increasing the beam emittance, which locally inhibits the FEL process. This scheme permits high-stability in energy and spectrum and the control of the two-color duration and intensity ratio. It enables shot-to-shot switching between one and two-color FEL and, since not associate to beam losses, it is compatible with high repetition-rate and high average-power FELs.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Reduced Stochastic Resistive Switching in Organic-Inorganic Hybrid Memristors by Vapor-Phase Infiltration

We report resistive random-access memory (RRAM) is promising for next-generation data storage and non-von Neumann computing hardware. However, tuning device switching characteristics and particularly, controlling their stochastic variation remain as critical challenges. Here, new organic-inorganic hybrid RRAM media are reported whose bipolar switching characteristics and stochasticity can be controlled by vapor-phase infiltration (VPI), an ex situ hybridization technique derived from atomic layer deposition. Hybrid RRAMs based on AlO x -infiltrated SU-8 feature facile tunability of device switching voltages, off-state current, and on-off ratio by adjusting the amount of infiltrated AlO x in the hybrid. Furthermore, a significant reduction in the stochastic, cycle-to-cycle variations of switching parameters is enabled by AlO x infiltration, driven by the infiltration-induced changes in mechanical, dielectric, and chemical properties of organic medium and their influence on the dimension and formation characteristics of conductive filaments. Finally, multi-level analog switching potentially useful for neuromorphic applications are demonstrated, along with direct, one-step device patterning exploiting the negative-tone resist feature of SU-8. With the demonstrated control over switching characteristics and stochastic variation, combined with analog switching and one-step patterning capabilities, the results not only present a novel hybrid medium for RRAM applications but also showcase the utility of VPI for developing new, high-performance hybrid RRAM devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Structural evolution of two-dimensional silicates using a “bond-switching” algorithm

Silicates are the most abundant materials in the earth's crust. In recent years, two-dimensional (2D) versions of them grown on metal supports (known as bilayer silicates) have allowed their study in detail down to the atomic scale. These structures are self-containing. Furthermore, they are not covalently bound to the metal support but interact with it through van der Waals forces. Like their three-dimensional counterparts, the 2D-silicates can form both crystalline and vitreous structures. Furthermore, the interconversion between vitreous to crystalline structures has been experimentally observed at the nanoscale. While theoretical work has been carried out to try to understand these transformations, a limitation for ab initio methods, and even molecular dynamics methods, is the computational cost of studying large systems and long timescales. In this work, we present a simple and computationally inexpensive approach, that can be used to represent the evolution of bilayer silicates using a bond-switching algorithm. This approach allows reaching equilibrium ring size distributions as a function of a parameter that can be related to the ratio between temperature and the energy required for the bond-switching event. The ring size distributions are compared to experimental data available in the literature.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Passive selective catalytic reduction (SCR) system and method for low-temperature combustion (LTC) engine

A combustion mode module is configured to switch operation of a low-temperature combustion (LTC) engine between a spark ignition (SI) mode, a positive valve overlap (PVO) mode, and a negative valve overlap (NVO) mode. A spark control module is configured to control a spark plug to generate a spark in a cylinder of the LTC engine when the LTC engine is operating in the SI mode. A valve control module is configured to control intake and exhaust valves of the cylinder to yield a PVO and a NVO when the LTC engine is operating in the PVO mode and the NVO mode, respectively. An air/fuel (A/F) control module is configured to adjust a desired A/F ratio of the LTC engine to a rich A/F ratio when operation of the LTC engine is switched to the PVO mode from either one of the SI mode and the NVO mode.

Yun, Hanho↗
DOE OSTI2021

Ion beam etching dependence of spin-orbit torque memory devices with switching current densities reduced by Hf interlayers

We report on the fabrication of nanoscale, three-terminal in-plane spin–orbit torque switching devices with low switching current densities. Critical parameters in the fabrication process, including the ion beam etching angle and time, were optimized to avoid fabrication defects and improve device yield. Measurements of the magnetic field and current-induced switching behavior of the tunnel junctions demonstrate a sensitivity to the nanopillar aspect ratio, which dictates the nanopillars’ anisotropy and thermal stability. Additionally, we show that the current density required for switching can be reduced and the device thermal stability increased by inserting Hf interlayers into the heterostructure. Micromagnetic simulations are generally consistent with the experimentally observed switching behavior, suggesting an increase in the interfacial perpendicular anisotropy at the CoFeB/MgO interface and the reduction in the Dzyaloshinskii–Moriya interaction at the W/CoFeB interface by the Hf interlayers.

36 MATERIALS SCIENCE↗