Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “switch”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Reversible Morphology Switching of Colloidal Particles

A facile method has been discovered that enables switching of non-cross-linked poly(styrene) (Nx-PS) colloidal particle morphologies, including spherical and anisotropic convex- convex, plano-convex, and concave-convex. The anisotropic morphologies can be achieved readily from spherical Nx-PS particles through control of annealing time at elevated temperatures or surfactant concentration. These anisotropic morphologies can be reversed to spherical at lower temperatures, and reversible morphology switching between any pair of anisotropic morphologies also can be attained. This approach to particle morphology switching establishes a straightforward method for the synthesis of designer anisotropic particles using commercially available spherical particles as starting materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

On the possibility of a new passively Q-switched laser operation mode with periodic wavelength switching

The possibility of cw-pumped passively Q-switched laser operation has been examined theoretically. Also, we have proposed laser operation mode in which the output wavelength automatically switches between two values without any changes in cavity parameters. Using numerical simulation and an Er:YAG laser with a Co:ZnSe passive Q-switch as an example, we have found parameters that ensure such operation mode. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Anomalous reduction of the switching voltage of Bi-doped Ge{sub 0.5}Se{sub 0.5} ovonic threshold switching devices

Switching devices based on Ovonic Threshold Switching (OTS) have been considered as a solution to overcoming limitations of Si-based electronic devices, but the reduction of switching voltage is a major challenge. Here, we investigated the effect of Bi-doping in Ge{sub 0.5}Se{sub 0.5} thin films on their thermal, optical, electrical properties, as well as on the characteristics of OTS devices. As Bi increased, it was found that both of the optical energy gap (E{sub g}{sup opt}) and the depth of trap states decreased resulting in a drastic reduction of the threshold voltage (V{sub th}) by over 50%. In addition, E{sub g}{sup opt} was found to be about three times of the conduction activation energy for each composition. These results are explained in terms of the Mott delocalization effect by doping Bi.

36 MATERIALS SCIENCE↗

Nonpolar resistive memory switching with all four possible resistive switching modes in amorphous LaHoO{sub 3} thin films

We studied the resistive memory switching in pulsed laser deposited amorphous LaHoO{sub 3} (a-LHO) thin films for non-volatile resistive random access memory applications. Nonpolar resistive switching (RS) was achieved in Pt/a-LHO/Pt memory cells with all four possible RS modes (i.e., positive unipolar, positive bipolar, negative unipolar, and negative bipolar) having high R{sub ON}/R{sub OFF} ratios (in the range of ∼10{sup 4}–10{sup 5}) and non-overlapping switching voltages (set voltage, V{sub ON} ∼ ±3.6–4.2 V and reset voltage, V{sub OFF} ∼ ±1.3–1.6 V) with a small variation of about ±5–8%. Temperature dependent current-voltage (I–V) characteristics indicated the metallic conduction in low resistance states (LRS). We believe that the formation (set) and rupture (reset) of mixed conducting filaments formed out of oxygen vacancies and metallic Ho atoms could be responsible for the change in the resistance states of the memory cell. Detailed analysis of I–V characteristics further corroborated the formation of conductive nanofilaments based on metal-like (Ohmic) conduction in LRS. Simmons-Schottky emission was found to be the dominant charge transport mechanism in the high resistance state.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Switch Opening and Exchange Method for Stochastic Distribution Network Reconfiguration

The purpose of distribution network reconfiguration (DNR) is to determine the optimal topology of an electricity distribution network, which is an efficient measure to reduce network power losses. Electricity load demand and photovoltaic (PV) output are uncertain and vary with time of day, and will affect the optimal network topology. Single-hour deterministic DNR is incapable of handling this uncertainty and variability. Therefore, this paper proposes to solve a multi-hour stochastic DNR (SDNR). Existing solution methods for DNR are either inaccurate or excessively time-consuming, and are therefore incapable of solving multi-hour SDNRs for large distribution networks. In this regard, a switch opening and exchange (SOE) method is proposed. Starting from a looped network with all switches closed, the SOE consists of three steps. The first step is to sequentially open the switches until all of the loops are opened. The second and third steps modify the status of branches obtained in the first step to obtain better radial topologies. Five test systems are used to validate the accuracy and fast solution speed of the SOE and the superiority of multi-hour SDNR over single-hour deterministic DNR.

distribution network reconfiguration↗

Comparison of the Capacitances and Switching Losses of 1.2 kV Common-Source and Common- Drain Bidirectional Switch Topologies

Bidirectional, or four-quadrant switches (FQS) can be designed as back-to-back MOSFETs connected in common-drain (CD) or common-source (CS) topologies. CDFQS and CS-FQS assembled from discrete 1.2 kV commercially available SiC power MOSFETs were characterized to obtain capacitance and switching loss values. The CD-FQS exhibited a 1.17x larger turn-on loss compared to the CS-FQS, while the CS-FQS exhibited a 1.52x larger turn-off loss compared to the CD-FQS. The CS-FQS exhibited a lower input capacitance, while the CD-FQS exhibited a lower output and reverse transfer capacitance.

Silicon Carbide, Bidirectional Switch, Switching P↗

Nonlinear space charge dynamics in mixed ionic-electronic conductors: Resistive switching and ferroelectric-like hysteresis of electromechanical response

We performed self-consistent modelling of nonlinear electrotransport and electromechanical response of thin films of mixed ionic-electronic conductors (MIEC) allowing for steric effects of mobile charged defects (ions, protons, or vacancies), electron degeneration, and Vegard stresses. We establish correlations between the features of the nonlinear space-charge dynamics, current-voltage, and bending-voltage curves for different types of the film electrodes. A pronounced ferroelectric-like hysteresis of the bending-voltage loops and current maxima on the double hysteresis current-voltage loops appear for the electron-transport electrodes. The double hysteresis loop with pronounced humps indicates a memristor-type resistive switching. The switching occurs due to the strong nonlinear coupling between the electronic and ionic subsystems. A sharp meta-stable maximum of the electron density appears near one open electrode and moves to another one during the periodic change of applied voltage. Our results can explain the nonlinear nature and correlation of electrical and mechanical memory effects in thin MIEC films. The analytical expression proving that the electrically induced bending of MIEC films can be detected by interferometric methods is derived.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thickness, humidity, and polarization dependent ferroelectric switching and conductivity in Mg doped lithium niobate

Mg doped lithium niobate (Mg:LN) exhibits several advantages over undoped LN such as resistance to photorefraction, lower coercive fields, and p-type conductivity that is particularly pronounced at domain walls and opens up a range of applications, e.g., in domain wall electronics. Engineering of precise domain patterns necessitates well founded knowledge of switching kinetics, which can differ significantly from that of undoped LN. In this work, the role of humidity and sample composition in polarization reversal has been investigated under application of the same voltage waveform. Control over domain sizes has been achieved by varying the sample thickness and initial polarization as well as atmospheric conditions. In addition, local introduction of proton exchanged phases allows for inhibition of domain nucleation or destabilization, which can be utilized to modify domain patterns. Polarization dependent current flow, attributed to charged domain walls and band bending, demonstrates the rectifying ability of Mg:LN in combination with suitable metal electrodes that allow for further tailoring of conductivity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dual-wavelength Q-switched laser based on a lens-shaped Nd : YAG active element and a Cr{sup 4+}: YAG passive Q-switch

Dual-wavelength Q-switched lasing at wavelengths of 1047 and 1053 nm is achieved in a longitudinally diode-pumped laser with a lens-shaped Nd:YLF active element and a Cr{sup 4+} : YAG passive Q-switch. Dual-wavelength lasing is achieved as a result of transverse mode locking due to the choice of a cavity length corresponding to the close-to-semiconfocal configuration, which provides identical gains for the two laser wavelengths. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Switching between the mode-locking and Q-switching modes in two-section QW lasers upon a change in the absorber properties due to the Stark effect

The passive Q-switching and mode-locking modes are implemented in two-section lasers with three quantum wells. It is demonstrated that raising the reverse bias on the absorbing section changes its spectral and dynamic properties and, accordingly, leads to a change from the Q-switching mode to mode-locking. The pulse-repetition frequency in the mode-locking mode is 75 GHz, with the product of the pulse duration by the spectrum bandwidth being 0.49, which is close to the theoretical limit. It is shown that, in structures with three quantum wells, strong absorption at the lasing wavelength gives rise to a photocurrent across a section of the saturable absorber, which is sufficient for compensation of the applied bias.

36 MATERIALS SCIENCE↗

Safety Related Concerns with Installation and Use of Switch-Rated Plug/Receptacle Combinations in Lieu of Metal-Enclosed Disconnect Switches

The manufacturers of Nationally Recognized Testing Laboratory (NRTL) listed, switch-rated, plug and receptacle combinations tout their convenience, reliability, efficiency, and compliance with both the National Fire Protection Association (NFPA) 70®, National Electric Code (NEC), and National Fire Protection Association 70E®, The Standard for Electrical Safety in the Workplace, as advantages to using these products in lieu of traditional metal-enclosed disconnect switches. The purpose of this paper is to raise awareness of several unintended consequences that can result when replacement involves high energy cord and plug connected equipment. This paper describes several possible issues in complying with the NFPA 70 Articles 110 and 400 and NFPA 70E Articles 110 and 130 that should be considered when using load rated plug/receptacle combinations. This paper is intended to address high energy circuits typically associated with 480 volt pin and sleeve type connections in applications where incident energy levels may exceed 1.2 calories/centimeter² (cal/cm²).

99 GENERAL AND MISCELLANEOUS↗

Controlled Generation of Singlet Oxygen in Living Cells with Tunable Ratios of the Photochromic Switch in Metal–Organic Frameworks

Abstract Development of a photosensitizing system that can reversibly control the generation of singlet oxygen ( 1 O 2 ) is of great interest for photodynamic therapy (PDT). Recently several photosensitizer–photochromic‐switch dyads were reported as a potential means of the 1 O 2 control in PDT. However, the delivery of such a homogeneous molecular dyad as designed (e.g., optimal molar ratio) is extremely challenging in living systems. Herein we show a Zr‐MOF nanoplatform, demonstrating energy transfer‐based 1 O 2 controlled PDT. Our strategy allows for tuning the ratios between photosensitizer and the switch molecule, enabling maximum control of 1 O 2 generation. Meanwhile, the MOF provides proximal placement of the functional entities for efficient intermolecular energy transfer. As a result, the MOF nanoparticle formulation showed enhanced PDT efficacy with superior 1 O 2 control compared to that of homogeneous molecular analogues.

Park, Jihye↗

Evaluation of a commercially available passively Q-switched Nd:YAG laser with LiF:F-2(-) saturable absorber for laser-induced breakdown spectroscopy

Interest in passively Q-switched microchip lasers as a means for miniaturization of laser-induced breakdown spectroscopy (LIBS) apparatus has rapidly grown in the last years. To explore the possibility of using a comparatively UV-Vis transparent absorber, we herein present the first report on the evaluation of a commercially available flash lamp-pumped passively Q-switched Nd:YAG laser with LiF:F 2 - saturable absorber as an excitation source in LIBS. Quantitative measurements of barium, strontium, rubidium and lithium in granite, rhyolite, basalt and syenite whole-rock glass samples were performed. Ablation craters produced on a rock glass sample were characterized using a computerized X-ray tomography. Using a gated intensified benchtop spectrometer, limits of detection of 0.97, 23, 37, and 144 ppm were obtained for Li, Sr, Rb, and Ba, respectively. Finally, we discuss the advantages of using such a laser unit for LIBS applications in terms of ablation efficiency, analytical performances, output energy, and standoff capabilities.

36 MATERIALS SCIENCE↗

Manipulating I V Characteristics of a Molecular Switch with Chemical Modifications

We present a study of the effects of chemical modifications on the electron transport properties of the azobenzene molecule, which has been proposed as a component of a light-driven molecular switch. This molecule has two stable conformations (cis and trans) in the electronic ground state, with considerable differences in conductance. The electron transport properties were calculated using first-principles methods combining nonequilibrium Green s function techniques with density functional theory. Chemical modifications of the azobenzene consist of incorporation of electron-donating and electron-withdrawing groups in meta and ortho positions with respect to the azo group. The results show that the transport properties in electronic devices at the molecular level can be manipulated, enhanced, or suppressed by a careful consideration of the effects of chemical modification, and such modifications become crucial in optimizing the electron transport properties of chemical structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗