Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “surface reconstruction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

LOFTID Surface Heating Reconstruction

On November 10, 2022, the Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) reentry vehicle launched to low-Earth orbit aboard a United Launch Alliance Atlas V rocket out of Vandenberg Air Force Base. The aeroshell, the largest Hypersonic Inflatable Aerodynamic Decelerator (HIAD) ever flown, was inflated to its full 6-meter diameter before successful re-entry into the atmosphere. The aeroshell was heavily instrumented in order to understand its behavior during entry. There were 82 thermocouples (TCs) distributed across the aeroshell, with 22 integrated into the flexible thermal protection system (FTPS) on the rigid nose, 36 in the FTPS on the deployable structure, and 24 on the inflatable structure. TCs were placed at different depths throughout the FTPS. Those nearest to the surface were located just beneath the two SiC outer fabric layers. The near-surface TCs on the rigid nose were Type R with flame spray alumina insulation, while those on the flank were Type N with mica/ceramic insulation. Additionally, a radiometer was placed at the center of the nose surrounded by four total heat flux gauges in a cruciform configuration at a radius of 0.41 m. The nose instrumentation is shown in Fig. 1 and a cross-section of the aeroshell with all TC locations is shown in Fig. 2. The objective of this work was to use the temperatures measured by the TCs during flight to estimate the surface heat rate across the aeroshell throughout the period of re-entry by inverse analysis methodology. The results were used to evaluate the fidelity of measurements from the total heat flux gauges on the nose, determine the surface heat flux at aeroshell locations where gauges were not present, and compare to pre-flight CFD-based heating predictions. Inversely estimated surface heat flux continues to be used to correlate FTPS thermal models to reconstruct in-flight thermal response.

H S Alpert↗
NASA NTRSDate not supplied

LOFTID Surface Heating Reconstruction

On November 10, 2022, the Low-Earth Orbit Flight Test of an Inflatable Decelerator (LOFTID) reentry vehicle launched to low-Earth orbit aboard a United Launch Alliance Atlas V rocket out of Vandenberg Air Force Base. The aeroshell, the largest Hypersonic Inflatable Aerodynamic Decelerator (HIAD) ever flown, was inflated to its full 6-meter diameter before successful re-entry into the atmosphere. The aeroshell was heavily instrumented in order to understand its behavior during entry. There were 82 thermocouples (TCs) distributed across the aeroshell, with 22 integrated into the flexible thermal protection system (FTPS) on the rigid nose, 36 in the FTPS on the deployable structure, and 24 on the inflatable structure. TCs were placed at different depths throughout the FTPS. Those nearest to the surface were located just beneath the two SiC outer fabric layers. The near-surface TCs on the rigid nose were Type R with flame spray alumina insulation, while those on the flank were Type N with mica/ceramic insulation. Additionally, a radiometer was placed at the center of the nose surrounded by four total heat flux gauges in a cruciform configuration at a radius of 0.41 m. The nose instrumentation is shown in Fig. 1 and a cross-section of the aeroshell with all TC locations is shown in Fig. 2. The objective of this work was to use the temperatures measured by the TCs during flight to estimate the surface heat rate across the aeroshell throughout the period of re-entry by inverse analysis methodology. The results were used to evaluate the fidelity of measurements from the total heat flux gauges on the nose, determine the surface heat flux at aeroshell locations where gauges were not present, and compare to pre-flight CFD-based heating predictions. Inversely estimated surface heat flux continues to be used to correlate FTPS thermal models to reconstruct in-flight thermal response.

LOFTID↗
NASA NTRS1991

Sensor fusion III: 3-D perception and recognition; Proceedings of the Meeting, Boston, MA, Nov. 5-8, 1990

The volume on data fusion from multiple sources discusses fusing multiple views, temporal analysis and 3D motion interpretation, sensor fusion and eye-to-hand coordination, and integration in human shape perception. Attention is given to surface reconstruction, statistical methods in sensor fusion, fusing sensor data with environmental knowledge, computational models for sensor fusion, and evaluation and selection of sensor fusion techniques. Topics addressed include the structure of a scene from two and three projections, optical flow techniques for moving target detection, tactical sensor-based exploration in a robotic environment, and the fusion of human and machine skills for remote robotic operations. Also discussed are K-nearest-neighbor concepts for sensor fusion, surface reconstruction with discontinuities, a sensor-knowledge-command fusion paradigm for man-machine systems, coordinating sensing and local navigation, and terrain map matching using multisensing techniques for applications to autonomous vehicle navigation.

Schenker, Paul S.↗
DOE OSTI2025

Predicting Pulsed-Laser Deposition SrTiO 3 Homoepitaxy Growth Dynamics Using High-Speed Reflection High-Energy Electron Diffraction

Pulsed-laser deposition (PLD) is a powerful technique for growing complex oxides with controlled stoichiometry. To understand growth dynamics therein, it is common to leverage in situ spectroscopies, such as reflection high-energy electron diffraction (RHEED), to monitor surface crystallinity. Most commercial systems rely on video-rate cameras operating at 60-120 Hz that lack sufficient temporal resolution to capture growth dynamics at practical deposition frequencies. Here, a high-speed platform to record in situ dynamics via RHEED at >500 Hz is implemented. An open-source analysis package is designed to fit diffraction spots to 2D Gaussians, allowing single-pulse surface reconstruction kinetics extraction. Using homoepitaxially deposited (001)-oriented SrTiO 3 as a model system, we demonstrate how high-speed RHEED can provide real-time insight into growth processes obscured by slower acquisition systems. By fitting the single-pulse intensity to a set of exponential functions, we observe changes in the characteristic decay time and mechanism correlated to the substrate step width and surface termination. We observe distinct surface effects, with diffraction intensity decaying on lower-energy TiO 2 -terminated surfaces and stabilizing on SrO- or mixed-terminated surfaces. Similarly, using an exponential model, the extracted characteristic time of adatom deposition decreases with increased density of bonding sites associated with mixed termination and narrower step widths. Ultimately, this work shows how increasing RHEED temporal resolution can uncover new insights into growth processes, with practical implications for the design and control of PLD processes. This experimental platform provides new capabilities to enable data-driven machine learning analysis and autonomous control systems to enhance the complexity and fecundity of PLD.

(SrO)↗
NASA NTRS1975

The surface structure of titanium and its interaction with bromine and chlorine

The surface structure and composition of titanium have been studied by electron diffraction and Auger electron spectroscopy in the temperature range 25 to 850 C. Atomically clean, well-defined Ti surfaces were obtained by a combination of argon ion sputtering and thermal treatment at 700 to 800 C. A series of surface superstructures was observed as the crystal temperature was gradually decreased. The development of the superstructures is best explained as due to surface reconstruction as a result of surface relaxation. The interaction of bromine and chlorine vapors with clean Ti surfaces was investigated in the temperature range 25 to 500 C. Bromine exposure at room temperature gave rise to an amorphous surface layer, which on annealing transformed into an epitaxial TiBr2 structure. Chlorine interaction resulted in the formation of an epitaxial TiCl3 on both cold and hot Ti surfaces. Surface impurities inhibited the chemical interaction process on the Ti surface.

Khan, I. H.↗
DOE OSTI2025

A Reduced-Temperature Process for Preparing Atomically Clean Si(100) and SiGe(100) Surfaces with Vapor HF

Silicon processing techniques such as atomic precision advanced manufacturing (APAM) and epitaxial growth require surface preparations that activate oxide desorption (typically >1000 °C) and promote surface reconstruction toward atomically clean, flat, and ordered Si(100)-2 × 1. Here, in this study, we compare the aqueous and vapor phase cleaning of Si and Si/SiGe surfaces to prepare APAM-ready and epitaxy-ready surfaces at lower temperatures. Angle resolved X-ray photoelectron spectroscopy (ARXPS) and Fourier transform infrared (FTIR) spectroscopy indicate that vapor hydrogen fluoride (VHF) cleans dramatically reduce carbon surface contamination and allow the chemically prepared surface to reconstruct at lower temperatures, 600 °C for Si and 580 °C for a Si/Si 0.7 Ge 0.3 heterostructure, into an ordered atomic terrace structure indicated by scanning tunneling microscopy (STM). After thermal treatment and vacuum hydrogen termination, we demonstrate STM hydrogen desorption lithography (HDL) on VHF-treated Si samples, creating reactive zones that enable area-selective chemistry by using a thermal budget similar to CMOS process flows. We anticipate that these results will establish new pathways to integrate APAM with Si foundry processing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Surface structure of Sn doped β-Ga 2 O 3 (010) p(1×1) studied by quantitative low energy electron diffraction

Here, we have studied the surface structure of a single crystal β-Ga 2 O 3 (010) using quantitative Low Energy Electron Diffraction (LEED) and X-ray photoelectron spectroscopy (XPS). The XPS measurements show spectra typical of stoichiometric Ga 2 O 3 with a clean surface. LEED consistently shows a p(1x1) pattern, free of surface reconstruction. Quantitative LEED I(V) curves are acquired for 41 distinct diffraction spots. The experimental I(V) curves are compared to simulations over the first five layers. The best fits to the experimental LEED I(V) curves acquired at all diffraction spots are then used to calculate the interplanar relaxation and atomic rumpling. Significant atomic rumpling and interplanar relaxation are found over the first 5 atomic layers. As a result of rumpling a polarization of ~ 2 μC/cm 2 develops in the topmost surface layer. The structural results are in good agreement with previous density functional theory calculations and experimental X-ray photoelectron diffraction.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Cu–Ni Oxidation Mechanism Unveiled: A Machine Learning-Accelerated First-Principles and in Situ TEM Study

Here, the development of accurate methods for determining how alloy surfaces spontaneously restructure under reactive and corrosive environments is a key, long-standing, grand challenge in materials science. Using machine learning-accelerated density functional theory and rare-event methods, in conjunction with in situ environmental transmission electron microscopy (ETEM), we examine the interplay between surface reconstructions and preferential segregation tendencies of CuNi(100) surfaces under oxidation conditions. Our modeling approach predicts that oxygen-induced Ni segregation in CuNi alloys favors Cu(100)-O c(2 × 2) reconstruction and destabilizes the Cu(100)-O (2√2 × √2)R45° missing row reconstruction (MRR). In situ ETEM experiments validate these predictions and show Ni segregation followed by NiO nucleation and growth in regions without MRR, with secondary nucleation and growth of Cu 2 O in MRR regions. Our approach based on combining disparate computational components and in situ ETEM provides a holistic description of the oxidation mechanism in CuNi, which applies to other alloy systems.

36 MATERIALS SCIENCE↗
NASA NTRS2001

An integrated software suite for surface-based analyses of cerebral cortex

The authors describe and illustrate an integrated trio of software programs for carrying out surface-based analyses of cerebral cortex. The first component of this trio, SureFit (Surface Reconstruction by Filtering and Intensity Transformations), is used primarily for cortical segmentation, volume visualization, surface generation, and the mapping of functional neuroimaging data onto surfaces. The second component, Caret (Computerized Anatomical Reconstruction and Editing Tool Kit), provides a wide range of surface visualization and analysis options as well as capabilities for surface flattening, surface-based deformation, and other surface manipulations. The third component, SuMS (Surface Management System), is a database and associated user interface for surface-related data. It provides for efficient insertion, searching, and extraction of surface and volume data from the database.

NASA Discipline Neuroscience↗
DOE OSTI2025

Catalyst Deactivation Modes of PdO/γ-Al 2 O 3 Catalysts for Lean Methane Oxidation

PdO/γ-Al 2 O 3 catalysts are one of the most active catalytic components for the complete oxidation of methane. Under reaction conditions, especially in a wet feed, the catalysts suffer severe performance degradation. This study establishes a series of testing protocols to systematically investigate the causes of catalyst deactivation under methane oxidation reaction conditions. Four distinct catalyst deactivation modes are identified. Two of the deactivation modes are directly related to H 2 O, either from the feed gas or as a part of the reaction products, with one (Mode 2) being attributed to the formation of surface hydroxyl groups and the other (Mode 3) to the competitive adsorption of H 2 O on the catalysts. The impact of the two deactivation modes is acute and severe but reversible. In contrast, the other two deactivation modes are gradual and persistent but irreversible. Both modes are induced by CH 4 oxidation reaction, with the impact of a wet feed (Mode 4) being substantially more severe than that of a dry feed (Mode 1). The major cause of the irreversible catalyst deactivation is attributed to surface reconstruction of PdO nanoparticles, which behaves as a passivation layer lowering the number of coordinately unsaturated Pd sites for CH 4 activation. Although the passivation layer is relatively stable against thermal or hydrothermal treatment, it is not completely inert. Formation and partial regeneration of the passivation layer is a highly dynamic process and heavily depends on the reaction temperature: a lower reaction temperature (≤ 450 ℃) can lead to quicker catalyst deactivation; but a higher reaction temperature (between 500 – 550 ℃) can result in a greater extent of catalyst deactivation.

PdO/γ-Al2O3↗
DOE OSTI2025

Unraveling the Surface Termination and Evolution of Surface States for Electrocatalyst PtSn 4 in Alkaline HER

Semimetal PtSn 4 has been experimentally demonstrated as a promising topological electrocatalyst for the hydrogen evolution reaction (HER) under both acidic and alkaline conditions. While two possible mechanisms have been proposed to explain its activity, the role of its surface states in HER remains unclear. It is indeed in question how the surface states of this alloy evolve as HER proceeds. In this study, we investigate the surface termination that sustains conducting surface states on PtSn 4 , and we track their evolution during HER catalysis. We show that a reconstructed surface with a Sn-poor termination reproduces the scanning tunneling microscopy pattern observed in experiments and sustains a conducting surface. Through phase diagram and geometric structure analysis, we outline the HER profile following the Volmer–Heyrovsky mechanism. As hydrogen atoms adsorb onto the surface, the structure undergoes further reconstruction to an equilibrium phase with a coverage of two hydrides per unit cell. Meanwhile, the surface electronic bands evolve in response to interactions with the adsorbed hydrogen atoms. A hybridization diagram is further proposed for understanding the surface state evolution based on wave function and chemical bonding analyses. While the Pt atoms serve as conventional sites for hydrogen binding, the surface states of PtSn 4 are essential for stabilizing the hydrogen antibonding states via in-phase electronic interactions with the Sn components. This stabilization results in frontier surface bands that are responsible for driving the HER catalysis. Here, our findings provide a detailed description for the direct involvement of surface states on PtSn4 when employed as a catalyst for HER.

catalysts↗
DOE OSTI2025

Dual roles of stepped surfaces: Catalytic initiators and stabilizers of oxygen-induced reconstructions

Understanding surface restructuring under reactive conditions is crucial for designing next-generation catalysts with enhanced activity and selectivity. Here, we employ in situ transmission electron microscopy to directly observe the dynamic behavior of Cu(100) and Cu(410) surfaces under both oxidizing and vacuum annealing conditions, revealing a complex interplay among surface crystallography, local oxygen coverage, Cu atom mobility, and step-edge reactivity. The stepped Cu(410) surface acts as an active site for O 2 dissociation, triggering the oscillatory transformation of the c(2 × 2)–O phase into the more stable (2$\sqrt2$ ×$\sqrt2$)R45°–O missing-row (MR) structure on the adjacent flat Cu(100) terrace. Under subsequent vacuum annealing, this same Cu(410) facet exhibits remarkable structural resilience, preserving the MR reconstruction and chemisorbed oxygen. In contrast, the Cu(100) surface undergoes reversible transitions from the MR structure back to the c(2 × 2)–O phase. These results highlight the critical role of surface morphology in directing both the formation and stability of oxygen-induced reconstructions, demonstrating that stepped surfaces serve dual roles as both catalytic initiators and structural stabilizers. Furthermore, this work offers atomic-level insights into the environment-responsive behavior of copper surfaces, establishing a mechanistic basis for designing Cu-based catalysts through facet-specific control of surface reactivity.

36 MATERIALS SCIENCE↗
NASA NTRS1997

Structural and functional analyses of human cerebral cortex using a surface-based atlas

We have analyzed the geometry, geography, and functional organization of human cerebral cortex using surface reconstructions and cortical flat maps of the left and right hemispheres generated from a digital atlas (the Visible Man). The total surface area of the reconstructed Visible Man neocortex is 1570 cm2 (both hemispheres), approximately 70% of which is buried in sulci. By linking the Visible Man cerebrum to the Talairach stereotaxic coordinate space, the locations of activation foci reported in neuroimaging studies can be readily visualized in relation to the cortical surface. The associated spatial uncertainty was empirically shown to have a radius in three dimensions of approximately 10 mm. Application of this approach to studies of visual cortex reveals the overall patterns of activation associated with different aspects of visual function and the relationship of these patterns to topographically organized visual areas. Our analysis supports a distinction between an anterior region in ventral occipito-temporal cortex that is selectively involved in form processing and a more posterior region (in or near areas VP and V4v) involved in both form and color processing. Foci associated with motion processing are mainly concentrated in a region along the occipito-temporal junction, the ventral portion of which overlaps with foci also implicated in form processing. Comparisons between flat maps of human and macaque monkey cerebral cortex indicate significant differences as well as many similarities in the relative sizes and positions of cortical regions known or suspected to be homologous in the two species.

NASA Discipline Neuroscience↗
NASA NTRS2002

Surface-based atlases of cerebellar cortex in the human, macaque, and mouse

This study describes surface reconstructions and associated flat maps that represent the highly convoluted shape of cerebellar cortex in three species: human, macaque, and mouse. The reconstructions were based on high-resolution structural MRI data obtained from other laboratories. The surface areas determined for the fiducial reconstructions are about 600 cm(2) for the human, 60 cm(2) for the macaque, and 0.8 cm(2) for the mouse. As expected from the ribbon-like pattern of cerebellar folding, the cerebellar flat maps are elongated along the axis parallel to the midline. However, the degree of elongation varies markedly across species. The macaque flat map is many times longer than its mean width, whereas the mouse flat map is only slightly elongated and the human map is intermediate in its aspect ratio. These cerebellar atlases, along with associated software for visualization and for mapping experimental data onto the atlas, are freely available to the neuroscience community (see http:/brainmap.wustl.edu).

NASA Discipline Neuroscience↗
NASA NTRS1994

Stress Calculations on Diamond Surfaces

Calculations were carried out to evaluate stresses for atoms located in the top several layers of (100)-(1x1), (100)-(2x1) and (111)-(1x1) surfaces of diamond. Only equilibrated surfaces were taken into consideration in this investigation. Stress values in the direction perpendicular to the exposed surface vanish. In lateral directions, however, stresses have non-vanishing values, in general. For the (100) surfaces calculated stress values are anisotropic. While the (2 x 1) reconstructed surface is under compression in both directions, calculations for the unreconstructed (1 x 1) plane, produced a compressive stress in one direction and a slight tension in the other. On the (111) surface, isotropic and relatively low compressive stress values were found. Present calculations indicate that atoms located only in a few top layers have lateral excess stresses which vanish very quickly for the atoms of interior layers as departing from the exposed surface.

Halicioglu, Timur↗
DOE OSTI2026

Facile synthesis of Co(OH)2 nanoneedle arrays grown on stainless steel for industrial electrochemical oxygen evolution reaction

The electrochemical oxygen evolution reaction (OER) is a critical half-reaction in a variety of energy conversion and storage applications, however, OER suffers from sluggish kinetics due to the four proton-electron transfer processes. To remedy this, interfacial engineering proves an effective strategy to design high active OER catalysts. Herein, we report a facile synthesis of Co(OH)2 nanoneedle (Co-NN) arrays grown on stainless steel (SS) via a one-step hydrothermal reaction, and the resultant impressive OER performance. Particularly, the Co-NN/SS needs 267, 307, and 576 mV overpotentials to reach 10, 100, and 1000 mA cm−2 in 1 M KOH & room temperature, and the overpotentials drop to 199, 257, and 283 mV to achieve the same current densities in 30 wt% KOH & 80 °C. Additionally, an alkaline water electrolysis (AWE) cell coupled with Co-NN/SS anode and PtRu/NiMo cathode only requires 1.65 and 1.73 V iR-free cell voltage to reach 1.0 and 2.0 A cm−2, respectively. The sterling OER performance could be attributed to four possible reasons, the Fe in SS surface tailoring the electronic properties of Co(OH)2, the mixed metal oxides on SS surface accelerating surface reconstruction of Co(OH)2 nanoneedles into CoOOH active species, a Ni-rich surface layer formation cooperatively boosting the OER activity, and a local electric field effect concentrating reactants on the tip surface and accelerating the mass transfer. This work provides a facile approach for synthesizing highly efficient OER catalysts for industrial applications by interfacial engineering.

Lyu, Xiang [ORNL] (ORCID:0000000208673248)↗
NASA NTRS2016

Low Temperature Rhombohedral Single Crystal SiGe Epitaxy on c-plane Sapphire

Current best practice in epitaxial growth of rhombohedral SiGe onto (0001) sapphire (Al2O3) substrate surfaces requires extreme conditions to grow a single crystal SiGe film. Previous models described the sapphire surface reconstruction as the overriding factor in rhombohedral epitaxy, requiring a high temperature Al-terminated surface for high quality films. Temperatures in the 850-1100 C range were thought to be necessary to get SiGe to form coherent atomic matching between the (111) SiGe plane and the (0001) sapphire surface. Such fabrication conditions are difficult and uneconomical, hindering widespread application. This work proposes an alternative model that considers the bulk sapphire structure and determines how the SiGe film nucleates and grows. Accounting for thermal expansion effects, calculations using this new model show that both pure Ge and SiGe can form single crystal films in the 450-550 C temperature range. Experimental results confirm these predictions, where x-ray diffraction and atomic force microscopy show the films fabricated at low temperature rival the high temperature films in crystallographic and surface quality. Finally, an explanation is provided for why films of comparable high quality can be produced in either temperature range.

Duzik, Adam J.↗