Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “stream discharge”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

ERTS-1 investigation of wetlands ecology

The author has identified the following significant results. Data from aircraft can be used for large scale mapping where detailed information is necessary, whereas Landsat-1 data are useful for rapid mapping of gross wetland boundaries and vegetative composition and assessment of seasonal change plant community composition such as high and low growth forms of Spartina alterniflora, Juncus roemarianus, and Spartina cynosuroides. Spoil disposal and wetland ditching activities may also be defined. Wetland interpretation is affected by tidal stage; drainage patterns are more easily detected at periods of low water. Species discrimination is easier at periods of high water during the growing season; upper wetland boundaries in fresh water tidal marshes are more easily delineated during the winter months when marsh vegetation is largely dead or dormant. Fresh water discharges from coastal streams may be inferred from the species composition of contiguous wetlands.

Anderson, R. R.↗
NASA NTRS2011

Wet active chevron nozzle for controllable jet noise reduction

Disposed at or toward the trailing edge of one or more nozzles associated with a jet engine are injection ports which can selectively be made to discharge a water stream into a nozzle flow stream for the purpose of increasing turbulence in somewhat of a similar fashion as mechanically disposed chevrons have done in the known art. Unlike mechanically disposed chevrons of the known art, the fluid flow may be secured thereby increasing the engine efficiency. Various flow patterns, water pressures, orifice designs or other factors can be made operative to provide desired performance characteristics.

Thomas, Russell H.↗
NASA NTRSDate not supplied

Low-Temperature Production of Cosmic Grains Analogs From Gas-Phase Molecular Precursors with the NASA Ames' COSmIC Facility

Complex carbon molecules and ions are ubiquitous in space and form the building blocks of carbonaceous cosmic dust grains, ultimately contributing to the formation of planets. Here, we report the first experimental investigations of the low temperature chemical pathways leading to the production of cosmic grain analogs from gas phase molecular precursors in order to better understand the evolution of cosmic carbon. The experiments were performed using the COsmic SImulation Chamber (COSmIC) to generate and characterize grains formed from gas phase precursors under controlled conditions representative of astrophysical environments [1]. Using COSmIC, it is possible to investigate the evolution of cosmic carbon from the formation of neutral and ionized gas phase hydrocarbons and PAHs [2], to carbon grains [3, 4]. This is achieved by using a discharge nozzle to (1) produce an adiabatic jet expansion and cool down Ar-hydrocarbon/PAH gas mixtures to astrophysically relevant temperature (150 K) before inducing chemistry by generating a plasma discharge in the stream of the expansion. This plasma-induced chemistry results in the formation of complex molecules and solid particles, analogs of cosmic grains. Solid grains are produced in-situ in the plasma expansion, carried by the accelerated gas in the expansion, and collected on substrates placed a few centimeters downstream of the electrodes. The results of a preliminary solid phase ex-situ analysis of cosmic grain analogs produced at low temperature in COSmIC from gas mixtures including molecular precursors of cosmic carbon grains, i.e., such as CH4 and C2H2 found in circumstellar ejecta of late C stars [3] as well as PAHs ubiquitously detected in IR emission bands seen in galactic and extragalactic environments [4] will be discussed. Scanning Electron Microscopy imaging was used to provide insight on the morphology and growth structure of the grains produced in COSmIC, and to investigate how the precursors used to produce the grains affect these parameters [3]. Laser desorption mass spectrometry was used to identify the molecules making up the main structures within the condensed grains [4]. NIR to FIR optical properties are characterized to provide critical information (functional groups, optical constants) to the scientific community, for use in radiative transfer models in particular, and to help decipher and enhance the return data from space observations.

F. Salama↗
NASA NTRS2022

The Titan Haze Simulation (THS) Experiment on COSmIC. Part III. XANES Study of Laboratory Analogs of Titan Tholins

We have used the Titan Haze Simulation (THS) experimental set-up at NASA Ames’ COSmIC 19 facility to produce four laboratory analogs of Titan’s aerosols, or tholins. These tholin samples 20 were produced from four gas mixtures, representative of Titan’s atmosphere, of initial 21 compositions N2:CH4 (90:10 and 95:5) and N2:CH4:C2H2 (89.5:10:0.5 and 94.5:5:0.5) at 150 K, 22 using a plasma discharge in the stream of a jet-cooled gas expansion. Here we present an ex-situ 23 X-ray absorption near-edge structure (XANES) spectroscopy analysis of these four tholin 24 samples. The C- and N-XANES spectra show the presence of various functional groups 25 (aromatic carbon, imines, nitriles, etc.) whose abundances are correlated with (i) the relative 26 proportions between N2 and CH4, and (ii) the presence or absence of C2H2 in the initial mixtures. 27 In particular, mixtures containing C2H2 result in the formation of tholins consisting of more 28 aromatic structures and displaying larger relative amounts of imines and nitriles, but lower 29 overall nitrogen content. XANES spectroscopy also allowed for the determination of the 30 elemental C/N ratios for the four tholins, which were all found to be low (< 2.5) and consistent 31 with those measured for tholins produced in other, independent experimental set-ups. The C/N 32 ratios of tholins produced from gas mixtures that contained C2H2 (2.2–2.4) were found to be 33 about twice as large as those of tholins produced from gas mixtures that did not contain C2H234 (0.9–1.3). These new experimental results from the COSmIC/THS experiment demonstrate the 35 impact initial precursors have on the nitrogen chemistry during the formation of tholins, which 36 may help in the interpretation of observations and the development of models of Titan’s 37 atmosphere.

Titan↗
NASA NTRSDate not supplied

Low Temperature Formation of Carbonaceous Grains from Hydrocarbons and PAHs with the COSmIC Facility

Complex carbon molecules and ions are ubiquitous in space and form the building blocks of the carbonaceous components of cosmic dust grains, ultimately contributing to the formation of planets. We report experimental investigations of the low temperature chemical pathways leading to the formation of cosmic grain analogs from gas phase molecular precursors to better understand the evolution of cosmic carbon. The study of the formation of dust is essential to understand and to quantify the budget of extraterrestrial organic molecules. Although dust plays an important role in the evolution of interstellar chemistry and in the formation of organic molecules, little is known on the formation and destruction processes of carbonaceous dust. The experiments were performed using the Cosmic Simulation Chamber (COSmIC) to generate and characterize solid grains formed from gas phase precursors under controlled conditions representative of astrophysical environments [1]. Using COSmIC, it is possible to investigate the evolution of cosmic carbon from the formation of neutral and ionized hydrocarbons and PAHs in the gas phase [2], to solid carbon grains [3, 4, 5]. This is achieved by using a pulsed slit discharge nozzle to produce an adiabatic jet expansion and cool down Ar-hydrocarbon and PAH gas mixtures to astrophysically relevant temperature before inducing chemistry by generating a plasma discharge in the stream of the expansion. This plasma induced chemistry results in the formation of complex molecules and solid particles, analogs of cosmic grains in situ in the plasma expansion (i.e., without wall effects) that are carried by the accelerated gas in the expansion, and collected on substrates placed a few centimeters downstream of the electrodes. The results of a preliminary solid phase ex-situ analysis of cosmic grain analogs produced from a series of gas mixtures including hydrocarbons such as CH4 and C2H2 [3] and PAHs [4, 5] found in circumstellar ejecta of late C stars will be discussed. SEM imaging was used to provide insight on the impact of the precursors on the morphology and growth structure of the grains produced [3]. Laser desorption mass spectrometry was used to identify the molecules making up the main structures within the condensed grains [4] while X-ray irradiation and X-ray photoemission spectroscopy were used to investigate the impact the impact of stellar X-rays on cosmic dust.

Carbonaceous Grains↗
NASA NTRS1972

Liquid-phase mixing of bipropellant doublets

Experimental results of unlike doublet mixing are correlated with an analytically derived equation predicting fluid cavitation. The correlation relates the minimum orifice pressure drop required to initiate cavitation, with the system back pressure, cold flow simulant vapor pressure, and the orifice flow discharge and contraction coefficients. Stream flow instabilities are also visually correlated with the onset of cavitation and orifice discharge coefficient measurements. The influence of cavitation on the characteristic phenomenon of hydraulic flip is observed for both circular and noncircular shaped orifices. For certain intermediate orifice lengths, some noncircular shapes are shown to produce more fully developed flows (shorter recovery lengths) and therefore a more cohesive jet, which in turn yields slightly higher cold flow mixing uniformities than circular shaped orifices of equal absolute length. The particular noncircular shaped elements evaluated are shown to be more sensitive to liquid stream misimpingement than the corresponding circular orifices.

Hoehn, F. W.↗
NASA NTRS1977

The production and treatment of gaseous pollutants in an electrostatic precipitator

The production of ozone and nitric oxides and the oxidation of two organic contaminants, methane and acetylene, were studied in the corona discharge of a model cylindrical electrostatic precipitator. Both air and oxygen streams were passed through the discharge while current, voltage, electrode/wall radius ratio, residence time and wall temperature were varied. Under all conditions using air, much more ozone was produced in the negative than in the positive corona, in agreement with qualitative data reported in the literature. However, using oxygen, as much as three to four times more ozone is produced by the positive corona. Over a wide range of conditions ozone production is proportional to current. Limited analyses of nitric oxides formation in air indicated that levels were higher in the negative than in the positive corona. In contrast to previous work using an RF discharge, methane contamination was not removed by the corona discharge. However, the oxidation of acetylene was affected by the discharge and could not be accounted for by homogeneous ozonation alone.

Flamm, D. L.↗
NASA NTRS1975

Inviscid interpenetration of two streams with unequal total pressures

A theory is proposed for analyzing the inviscid interpretation of two streams in the case when the difference in total pressure between the streams is relatively small. A stream is considered which discharges from a nozzle or reservoir into a partially moving and partially stationary environment in such a way that the flows leave the solid boundaries in a tangential direction where the two streams first interact. The problem is solved by expanding in a small parameter related to the difference in total pressure between the streams, the zeroth-order solution is obtained by classical methods, and a technique similar to that employed in thin-airfoil theory is used to transfer the first-order boundary conditions to the zeroth-order boundary. A procedure is developed to transform the problem into one that can be solved by standard techniques of the theory of sectionally analytic functions. Solutions are obtained for flows with and without free streamlines, and the general theory is applied to several specific flow configurations.

Goldstein, M. E.↗
NASA NTRS1993

Radar studies of the West Antarctic ice streams

A collaboration has carried out measurements of ice thickness at the mouth of Ice Streams D and E, West Antarctica, using a surface-based impulse radar. These studies were undertaken as a part of the continuing effort to understand the state of the West Antarctic Ice Sheet and its response to climate change. Thickness measurements will be used in the mass balance calculation currently in progress and to better understand features in the surface topography seen at low-angle sun illumination in the satellite imagery. Results show that the discharge areas of Ice Streams D and E are thickening by approximately 1 meter per year, and thus that these ice streams are likely losing mass. Aperiodic wavelike features in the surface topography are described, which pose interesting questions about migration of the grounding line and ice-stream dynamics.

Jacobel, Robert W.↗
NASA NTRS1976

Electrolytic pretreatment unit gaseous effluent conditioning

The electrolytic pretreatment of urine is an advanced process that eliminates the need for handling and storing the highly corrosive chemicals that are normally used in water reclamation systems. The electrolytic pretreatment process also converts the organic materials in urine to gases (N2 and O2) that can be used to replenish those lost to space by leakage, venting, and air lock operations. The electrolytic process is more than a pretreatment, since it decreases the urine solids content by approximately one third, thus reducing the load and eventual solids storage requirements of the urine processing system. The evolved gases from the pretreatment step cannot, however, be returned directly to the atmosphere of a spacecraft without first removing several impurities including hydrogen, chlorine, and certain organic compounds. A treatment concept was developed that would decrease the impurities in the gas stream that emanates from an electrolysis unit to levels sufficiently low to allow the conditioned gas stream to be safely discharged to a spacecraft atmosphere. Two methods were experimentally demonstrated that can accomplish the desired cleanup. The bases of the two methods are, repectively: (1) raw urine scrubbing and (2) silica gel sorption.

Colombo, G. V.↗
NASA NTRS1980

The preparation of calcium superoxide in a flowing gas stream and fluidized bed

Superoxides can be used as sources of chemically stored oxygen in emergency breathing apparatus. The work reported here describes the use of a low-pressure nitrogen gas sweep through the reactant bed, for temperature control and water vapor removal. For a given set of gas temperature, bed thickness, and reaction time values, the highest purity calcium superoxide, Ca(O2)2, was obtained at the highest space velocity of the nitrogen gas sweep. The purity of the product was further increased by flow conditions that resulted in the fluidization of the reactant bed. However, scale-up of the low-pressure fluidized bed process was limited to the formation of agglomerates of reactant particles, which hindered thermal control by the flowing gas stream. A radiofrequency flow discharge inside the reaction chamber prevented agglomeration, presumably by dissipation of the static charges on the fluidized particles.

Wood, P. C.↗
NASA NTRS1988

Search for Martian fossil communities: Science strategies, sediment sites, and sample handling

The strategy for locating and sampling possible fossilized Martian organisms benefits from our experience with fossil microbial ecosystems on Earth. Evidence of early life is typically preserved as stromatolites in carbonates and cherts, and as microfossils in cherts, carbonates and shales. Stromatolites, which are laminated flat or domal structures built by microbial communities, are very likely the oldest and most widespread relics of early life. These communities flourished in supratidal to subtidal coastal benthic environments, wherever sunlight was available and where incoming sediments were insufficient to bury the communities before they became established. A logical site for such communities on Mars might be those areas in an ancient lake bed which were furthest from sediment input, but were still sufficiently shallow to have received sunlight. Therefore, although some sites within Valles Marineris might have contained ponded water, the possibly abundant sediment inputs might have overwhelmed stromatolite-like communities. Localized depressions which acted as catchment basins for ancient branched valley systems might be superior sites. Perhaps such depressions received drainage which, because of the relatively modest water discharges implied for these streams, was relatively low in transported sediment. Multiple streams converging on a single basin might have been able to maintain a shallow water environment for extended periods of time.

Desmarais, David J.↗
NASA NTRS1997

Interferometric Study of the Ice Stream in Interior Northeast Greenland

Initial work in Greenland with ERS-1 synthetic aperture radar (SAR) imagery led to the discovery of a large ice stream which carries much of the ice discharge from the northeast quadrant of the ice sheet. The ice stream was identified based on the morphology of the surface, which indicated the influence of localized rapid ice flow. Continued investigations using repeat-pass interferometry from ERS-1 and ERS-2 allowed the character of the rapid motion to be determined, mapping the onset region in the deep interior of the ice sheet as well as more rapid motion downstream. Markers were placed on the ice sheet and are being tracked with the global positioning system (GPS) survey to provide tie-points for the interferometry, which will allow the absolute velocities to be determined in this very remote area.

Fahnestock, Mark↗
NASA NTRS1990

Resonant instability of supersonic shear layers

A computer simulation of possible resonant instability of a supersonic shear layer is carried out. The resonance of two acoustic duct modes of the flow induced by periodic Mach waves generated by a wavy wall is sought. Results of the simulations are reported. Simulations are unable to document a resonant instability and the mixing characteristics remain unchanged. Possible weakness of the present simulations are discussed. A second set of simulations involving a mixing layer separating a supersonic and a subsonic stream were performed. A wavy wall placed adjacent to the supersonic stream to produce a set of periodic Mach waves terminating at the shear layer is modelled. The entire flow field is similar to that of an imperfectly expanded supersonic jet discharging into a subsonic coflowing stream for which enhanced mixing due to the onset of screech (feedback instability) is known to occur. The purpose of these simulations is to see if enhanced mixing and feedback instability would, indeed, take place. Some evidence of feedback oscillations is found in the simulated flow.

Tam, C. K. W.↗
NASA NTRS1972

Gas crossflow effects on airflow through a wire-form transpiration cooling material

An experimental analysis was conducted to determine the effects of gas stream flow parallel to the discharging surface on the flow characteristics of a wire-form porous material. Flow data were obtained over a range of transpiration airflow rates from 0.129 to 0.695/grams per second-centimeter squared and external gas stream Mach numbers from 0 to 0.46. The conclusion was drawn that the flow characteristics of the wire cloth were not significantly affected by the external gas flows.

Kaufman, A. S.↗
NASA NTRS1971

An investigation of transient pressure and plasma properties in a pinched plasma column

The transient pinched plasma column generated in a linear Z-pinch was studied experimentally and analytically. The plasma column was investigated experimentally with the following plasma diagnostics: a special rapid response pressure transducer, a magnetic field probe, a voltage probe and discharge luminosity. Axial pressure profiles on the discharge chamber axis were used to identify three characteristic regions of plasma column behavior; they were in temporal sequence: strong axial pressure asymmetry noted early in plasma column lifetime followed by plasma heating in which there is a rapid rise in static pressure and a slight decrease static pressure before plasma column breakup. Plasma column lifetime was approximately 5 microseconds. The axial pressure asymmetry was attributed to nonsimultaneous pinching of the imploding current sheet along the discharge chamber axis. The rapid heating is attributed in part to viscous effects introduced by radial gradients in the axial streaming velocity. Turbulent heating arising from discharge current excitation of the ion acoustic wave instability is also considered a possible heating mechanism.

Stover, E. K.↗