Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “stellar”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2014

Does the stellar distribution flare? A comparison of stellar scale heights with LAB H I data

The question of whether the stellar populations in the Milky Way take part in the flaring of scale heights as observed for the H I gas is a matter of debate. Standard mass models for the Milky Way assume a constant scale height for each of the different stellar distributions. However, there is mounting evidence that at least some of the stellar distributions reach, at large galactocentric distances, high altitudes, which are incompatible with a constant scale height. We discuss recent observational evidence for stellar flaring and compare it with H I data from the Leiden/Argentine/Bonn survey. Within the systemic and statistical uncertainties we find a good agreement between both.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2014

Deriving stellar inclination of slow rotators using stellar activity

Stellar inclination is an important parameter for many astrophysical studies. Although different techniques allow us to estimate stellar inclination for fast rotators, it becomes much more difficult when stars are rotating slower than ∼2-2.5 km s{sup –1}. By using the new activity simulation SOAP 2.0 which can reproduce the photometric and spectroscopic variations induced by stellar activity, we are able to fit observations of solar-type stars and derive their inclination. For HD 189733, we estimate the stellar inclination to be i=84{sub −20}{sup +6} deg, which implies a star-planet obliquity of ψ=4{sub −4}{sup +18} considering previous measurements of the spin-orbit angle. For α Cen B, we derive an inclination of i=45{sub −19}{sup +9}, which implies that the rotational spin of the star is not aligned with the orbital spin of the α Cen binary system. In addition, assuming that α Cen Bb is aligned with its host star, no transit would occur. The inclination of α Cen B can be measured using 40 radial-velocity measurements, which is remarkable given that the projected rotational velocity of the star is smaller than 1.15 km s{sup –1}.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2015

The spatial structure of young stellar clusters. II. Total young stellar populations

We investigate the intrinsic stellar populations (estimated total numbers of OB and pre-main-sequence stars down to 0.1 M{sub ⊙}) that are present in 17 massive star-forming regions (MSFRs) surveyed by the MYStIX project. The study is based on the catalog of >31,000 MYStIX Probable Complex Members with both disk-bearing and disk-free populations, compensating for extinction, nebulosity, and crowding effects. Correction for observational sensitivities is made using the X-ray luminosity function and the near-infrared initial mass function—a correction that is often not made by infrared surveys of young stars. The resulting maps of the projected structure of the young stellar populations, in units of intrinsic stellar surface density, allow direct comparison between different regions. Several regions have multiple dense clumps, similar in size and density to the Orion Nebula Cluster. The highest projected density of ∼34,000 stars pc{sup −2} is found in the core of the RCW 38 cluster. Histograms of surface density show different ranges of values in different regions, supporting the conclusion of Bressert et al. that no universal surface-density threshold can distinguish between clustered and distributed star formation. However, a large component of the young stellar population of MSFRs resides in dense environments of 200–10,000 stars pc{sup −2} (including within the nearby Orion molecular clouds), and we find that there is no evidence for the B10 conclusion that such dense regions form an extreme “tail” of the distribution. Tables of intrinsic populations for these regions are used in our companion study of young cluster properties and evolution.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2016

Discovery of a stellar overdensity in Eridanus–Phoenix in the Dark Energy Survey

We report the discovery of an excess of main-sequence turnoff stars in the direction of the constellations of Eridanus and Phoenix from the first-year data of the Dark Energy Survey (DES). The Eridanus–Phoenix (EriPhe) overdensity is centered around l∼285{sup ∘} and b∼−60{sup ∘} and spans at least 30° in longitude and 10° in latitude. The Poisson significance of the detection is at least 9σ. The stellar population in the overdense region is similar in brightness and color to that of the nearby globular cluster NGC 1261, indicating that the heliocentric distance of EriPhe is about d∼16 kpc. The extent of EriPhe in projection is therefore at least ∼4 kpc by ∼3 kpc. On the sky, this overdensity is located between NGC 1261 and a new stellar stream discovered by DES at a similar heliocentric distance, the so-called Phoenix Stream. Given their similar distance and proximity to each other, it is possible that these three structures may be kinematically associated. Alternatively, the EriPhe overdensity is morphologically similar to the Virgo overdensity and the Hercules–Aquila cloud, which also lie at a similar Galactocentric distance. These three overdensities lie along a polar plane separated by ∼120° and may share a common origin. Spectroscopic follow-up observations of the stars in EriPhe are required to fully understand the nature of this overdensity.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2016

Detailed opacity comparison for an improved stellar modeling of the envelopes of massive stars

Seismic observations have led to doubts or ambiguities concerning the opacity calculations used in stellar physics. Here, we concentrate on the iron-group opacity peak, due to iron, nickel, and chromium, located around T = 200,000 K for densities from 10{sup −8} to 10{sup −4} g cm{sup −3}, which creates some convective layers in stellar radiative envelopes for masses between 3 and 18 M{sub ⊙}. These conditions were extensively studied in the 1980s. More recently, inconsistencies between OP and OPAL opacity calculations have complicated the interpretation of seismic observations as the iron-group opacity peak excites acoustic and gravity modes in SPB, β Cephei, and sdB stars. We investigate the reliability of the theoretical opacity calculations using the modern opacity codes ATOMIC and SCO-RCG. We show their temperature and density dependence for conditions that are achievable in the laboratory and equivalent to astrophysical conditions. We also compare new theoretical opacity spectra with OP spectra and quantify how different approximations impact the Rosseland mean calculations.This detailed study estimates new ATOMIC and SCO-RCG Rosseland mean values for astrophysical conditions which we compare to OP values. Some puzzling questions are still under investigation for iron, but we find a strong increase in the Rosseland mean nickel opacity of a factor between 2 and 6 compared to OP. This appears to be due to the use of extrapolated atomic data for the Ni opacity within the OP calculations. A study on chromium is also shown.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2016

NuGrid stellar data set. I. Stellar yields from H to BI for stars with metallicities Z = 0.02 and Z = 0.01

We provide a set of stellar evolution and nucleosynthesis calculations that applies established physics assumptions simultaneously to low- and intermediate-mass and massive star models. Our goal is to provide an internally consistent and comprehensive nuclear production and yield database for applications in areas such as presolar grain studies. Our non-rotating models assume convective boundary mixing (CBM) where it has been adopted before. We include 8 (12) initial masses for Z = 0.01 (0.02). Models are followed either until the end of the asymptotic giant branch phase or the end of Si burning, complemented by simple analytic core-collapse supernova (SN) models with two options for fallback and shock velocities. The explosions show which pre-SN yields will most strongly be effected by the explosive nucleosynthesis. We discuss how these two explosion parameters impact the light elements and the s and p process. For low- and intermediate-mass models, our stellar yields from H to Bi include the effect of CBM at the He-intershell boundaries and the stellar evolution feedback of the mixing process that produces the {sup 13}C pocket. All post-processing nucleosynthesis calculations use the same nuclear reaction rate network and nuclear physics input. We provide a discussion of the nuclear production across the entire mass range organized by element group. The entirety of our stellar nucleosynthesis profile and time evolution output are available electronically, and tools to explore the data on the NuGrid VOspace hosted by the Canadian Astronomical Data Centre are introduced.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2017

Formation and Assembly History of Stellar Components in Galaxies as a Function of Stellar and Halo Mass

Galaxy mass assembly is an end product of structure formation in the ΛCDM cosmology. As an extension of Lee and Yi, we investigate the assembly history of stellar components in galaxies as a function of halo environments and stellar mass using semi-analytic approaches. In our fiducial model, halo mass intrinsically determines the formation and assembly of the stellar mass. Overall, the ex situ fraction slowly increases in central galaxies with increasing halo mass but sharply increases for logM{sub ∗}/M{sub ⊙}≳11. A similar trend is also found in satellite galaxies, which implies that mergers are essential to build stellar masses above logM{sub ∗}/M{sub ⊙}∼11. We also examine the time evolution of the contribution of mass growth channels. Mergers become the primary channel in the mass growth of central galaxies when their host halo mass begins to exceed logM{sub 200}/M{sub ⊙}∼13. However, satellite galaxies seldom reach the merger-dominant phase despite their reduced star-formation activities due to environmental effects.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2017

The Importance of Preventive Feedback: Inference from Observations of the Stellar Masses and Metallicities of Milky Way Dwarf Galaxies

Dwarf galaxies are known to have remarkably low star formation efficiency due to strong feedback. Adopting the dwarf galaxies of the Milky Way (MW) as a laboratory, we explore a flexible semi-analytic galaxy formation model to understand how the feedback processes shape the satellite galaxies of the MW. Using Markov Chain Monte Carlo, we exhaustively search a large parameter space of the model and rigorously show that the general wisdom of strong outflows as the primary feedback mechanism cannot simultaneously explain the stellar mass function and the mass–metallicity relation of the MW satellites. An extended model that assumes that a fraction of baryons is prevented from collapsing into low-mass halos in the first place can be accurately constrained to simultaneously reproduce those observations. The inference suggests that two different physical mechanisms are needed to explain the two different data sets. In particular, moderate outflows with weak halo mass dependence are needed to explain the mass–metallicity relation, and prevention of baryons falling into shallow gravitational potentials of low-mass halos (e.g., “pre-heating”) is needed to explain the low stellar mass fraction for a given subhalo mass.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Stellar Population Properties in the Stellar Streams around SPRC047

Abstract We have investigated the properties (e.g., age, metallicity) of the stellar populations of a ringlike tidal stellar stream (or streams) around the edge-on galaxy SPRC047 (z= 0.031) using spectral energy distribution (SED) fits to integrated broadband aperture flux densities. We used visual images in six different bands and Spitzer/IRAC 3.6μm data. We have attempted to derive best-fit stellar population parameters (metallicity, age) in three noncontiguous segments of the stream. Due to the very low surface brightness of the stream, we have performed a deconvolution with a Richardson–Lucy–type algorithm of the low spatial resolution 3.6μm IRAC image, thereby reducing the effect of the point-spread function aliasedemissionfrom the bright edge-on central galaxy at the locations of our three stream segments. Our SED fits that used several different star formation (SF) history priors, from an exponentially decaying SF burst to continuous SF, indicate that the age–metallicity–dust degeneracy is not resolved, most likely because of inadequate wavelength coverage and low signal-to-noise ratios of the low surface brightness features. We also discuss how future deep visual–near-infrared observations, combined with absolute flux calibration uncertainties at or below the 1% level, complemented by equally well absolute flux-calibrated observations in ultraviolet and mid-infrared bands, would improve the accuracy of broadband SED fitting results for low surface brightness targets, such as stellar streams around nearby galaxies that are not resolved into stars.

Astronomy & Astrophysics↗
NASA NTRS2006

Direct Imaging of Stellar Surfaces: Results from the Stellar Imager (SI) Vision Mission Study

The Stellar Imager (SI) is a UV-Optical, Space-Based Interferometer designed to enable 0.1 milli-arcsecond (mas) spectral imaging of stellar surfaces and stellar interiors (via asteroseismology) and of the Universe in general. SI is identified as a "Flagship and Landmark Discovery Mission'' in the 2005 Sun Solar System Connection (SSSC) Roadmap and as a candidate for a "Pathways to Life Observatory'' in the Exploration of the Universe Division (EUD) Roadmap (May, 2005). The ultra-sharp images of the Stellar Imager will revolutionize our view of many dynamic astrophysical processes: The 0.1 mas resolution of this deep-space telescope will transform point sources into extended sources, and snapshots into evolving views. SI's science focuses on the role of magnetism in the Universe, particularly on magnetic activity on the surfaces of stars like the Sun. SI's prime goal is to enable long-term forecasting of solar activity and the space weather that it drives in support of the Living With a Star program in the Exploration Era. SI will also revolutionize our understanding of the formation of planetary systems, of the habitability and climatology of distant planets, and of many magneto-hydrodynamically controlled processes in the Universe. In this paper we will discuss the results of the SI Vision Mission Study, elaborating on the science goals of the SI Mission and a mission architecture that could meet those goals.

Carpenter, Kenneth↗
NASA NTRS2006

Stellar Imager (SI) Space Mission: Stellar Magnetic Activity

The Stellar Imager (SI) is a UV-Optical, Space-Based interferometer designed to enable 0.1 milli-arcsecond (mas) spectral imaging of stellar surfaces and stellar interiors (via asteroseismology) and of the Universe in general. SI is identified as a "Flagship and Landmark Discovery Mission" in the 2005 Sun Solar System Connection (SSSC) Roadmap and as a candidate for a "Pathways to Life Observatory" in the Exploration of the Universe Division (EUD) Roadmap (May, 2005). The ultra-sharp images of the Stellar Imager will revolutionize our view of many dynamic astrophysical processes: The 0.1 mas resolution of this deep-space telescope will transform point sources into extended sources, and snapshots into evolving views. SI'S science focuses on the role of magnetism in the Universe, particularly on magnetic activity on the surfaces of stars like the Sun. SI'S prime goal is to enable long-term forecasting of solar activity and the space weather that it drives in support of the Living With a Star program in the Exploration Era. SI will also revolutionize our understanding of the formation of planetary systems, of the habitability and climatology of distant planets, and of many magneto-hydrodynamically controlled processes in the Universe. In this paper we will discuss the science goals of the SI Mission and a mission architecture that could meet those goals.

Carpenter, K. G.↗
NASA NTRS2007

The Stellar Imager (SI) - A Mission to Resolve Stellar Surfaces, Interiors, and Magnetic Activity

The Stellar Imager (SI) is a UV/Optical, Space-Based Interferometer designed to enable 0.1 milli-arcsecond (mas) spectral imaging of stellar surfaces and, via asteroseismology, stellar interiors and of the Universe in general. The ultra-sharp images of the Stellar Imager will revolutionize our view of many dynamic astrophysical processes by transforming point sources into extended sources, and snapshots into evolving views. SI's science focuses on the role of magnetism in the Universe, particularly on magnetic activity on the surfaces of stars like the Sun. SI's prime goal is to enable long-term forecasting of solar activity and the space weather that it drives. SI will also revolutionize our understanding of the formation of planetary systems, of the habitability and climatology of distant planets, and of many magneto-hydrodynamically controlled processes in the Universe. SI is included as a 'Flagship and Landmark Discovery Mission' in the 2005 NASA Sun Solar System Connection (SSSC) Roadmap and as a candidate for a 'Pathways to Life Observatory' in the NASA Exploration of the Universe Division (EUD) Roadmap (May, 2005). In this paper we discuss the science goals and technology needs of, and the baseline design for, the SI Mission (http://hires.gsfc.nasa.gov/si/) its ability to image the 'Biggest, Baddest, Coolest Stars'.

Carpenter, Kenneth↗
NASA NTRS2012

The Stellar Imager (SI) - A Mission to Resolve Stellar Surfaces, Interiors, and Magnetic Activity

The Stellar Imager (SI) is a space-based, UV/Optical Interferometer (UVOI) designed to enable 0.1 milli-arcsecond (mas) spectral imaging of stellar surfaces and of the Universe in general. It will also probe via asteroseismology flows and structures in stellar interiors. SI will enable the development and testing of a predictive dynamo model for the Sun, by observing patterns of surface activity and imaging of the structure and differential rotation of stellar interiors in a population study of Sun-like stars to determine the dependence of dynamo action on mass, internal structure and flows, and time. SI's science focuses on the role of magnetism in the Universe and will revolutionize our understanding of the formation of planetary systems, of the habitability and climatology of distant planets, and of many magnetohydrodynamically controlled processes in the Universe. SI is a "LandmarklDiscovery Mission" in the 2005 Heliophysics Roadmap, an implementation of the UVOI in the 2006 Astrophysics Strategic Plan, and a NASA Vision Mission ("NASA Space Science Vision Missions" (2008), ed. M. Allen). We present here the science goals of the SI Mission, a mission architecture that could meet those goals, and the technology development needed to enable this mission

Christensen-Dalsgaard, Jorgen↗
NASA NTRS2021

From Starspots to Stellar Coronal Mass Ejections Revisiting Empirical Stellar Relations

Upcoming missions, including the James Webb Space Telescope, will soon characterize the atmospheres of terrestrial-type exoplanets in habitable zones around cool K- and M-type stars searching for atmospheric biosignatures. Recent observations suggest that the ionizing radiation and particle environment from active cool planet hosts may be detrimental for exoplanetary habitability. Since no direct information on the radiation field is available, empirical relations between signatures of stellar activity, including the sizes and magnetic fields of starspots, are often used. Here, we revisit the empirical relation between the starspot size and the effective stellar temperature and evaluate its impact on estimates of stellar flare energies, coronal mass ejections, and fluxes of the associated stellar energetic particle events.

Konstantin Herbst↗
NASA NTRSDate not supplied

Modeling Stellar Jitter and its Effects on the Stellar Spectrum for More Precise Radial Velocity Measurements

Detection of Earth-size exoplanets is a technological and data analysis challenge. Future progress in Earth-mass exoplanet detection is expected from the development of extreme precision radial velocity (EPRV) measurements. The required precision of these measurements necessitates developing a new physics-based data analysis methodology to discriminate planetary signals from host-star-related effects, taking stellar variability and instrumental uncertainties into account. In this work, we investigate and quantify stellar disturbances of the planet-hosting solar-type star HD121504 from 3D radiative modeling obtained with the StellarBox code. The model was used to determine the statistical properties of the turbulent plasma and to obtain synthetic spectroscopic observations for several Fe I lines at different locations on the stellar disk to mimic high-resolution spectroscopic observations. Presented are the initial results of our effort to characterize stellar jitter properties as well as future objectives.

SMD↗
DOE OSTI2023

Star formation rate and stellar mass calibrations based on infrared photometry and their dependence on stellar population age and extinction

The stellar mass (M $\star$ ) and the star formation rate (SFR) are among the most important features that characterize galaxies. Measuring these fundamental properties accurately is critical for understanding the present state of galaxies, their history, and future evolution. Infrared (IR) photometry is widely used to measure the M $\star$ and SFR of galaxies because the near-IR traces the continuum emission of the majority of their stellar populations (SPs), and the mid/far-IR traces the dust emission powered by star-forming activity. This work explores the dependence of the IR emission of galaxies on their extinction, and the age of their SPs. It aims to provide accurate and precise IR-photometry SFR and M $\star$ calibrations that account for SP age and extinction while providing quantification of their scatter. We used the CIGALE spectral energy distribution (SED) fitting code to create model SEDs of galaxies with a wide range of star formation histories, dust content, and interstellar medium properties. We fit the relations between M $\star$ and SFR with IR and optical photometry of the model-galaxy SEDs with the Markov chain Monte Carlo (MCMC) method. As an independent confirmation of the MCMC fitting method, we performed a machine-learning random forest (RF) analysis on the same data set. The RF model yields similar results to the MCMC fits, thus validating the latter. This work provides calibrations for the SFR using a combination of the WISE bands 1 and 3, or the JWST NIR-F200W and MIRI-F2100W. It also provides mass-to-light ratio calibrations based on the WISE band-1, the JWST NIR-F200W, and the optical u - r or g - r colors. These calibrations account for the biases attributed to the SP age, while they are given in the form of extinction-dependent and extinction-independent relations. The proposed calibrations show robust estimations while minimizing the scatter and biases throughout a wide range of SFRs and stellar masses. The SFR calibration offers better results, especially in dust-free or passive galaxies where the contributions of old SPs or biases from the lack of dust are significant. Similarly, the M $\star$ calibration yields significantly better results for dusty and high-SFR galaxies where dust emission can otherwise bias the estimations.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

SDSS-IV MaNGA: How the Stellar Populations of Passive Central Galaxies Depend on Stellar and Halo Mass

We analyze spatially resolved and co-added SDSS-IV MaNGA spectra with signal-to-noise ratio ~100 from 2200 passive central galaxies (z ~ 0.05) to understand how central galaxy assembly depends on stellar mass (M*) and halo mass (M h ). We control for systematic errors in M h by employing a new group catalog from Tinker and the widely used Yang et al. catalog. At fixed M*, the strengths of several stellar absorption features vary systematically with M h . Completely model-free, this is one of the first indications that the stellar populations of centrals with identical M* are affected by the properties of their host halos. To interpret these variations, we applied full spectral fitting with the code alf. At fixed M*, centrals in more massive halos are older, show lower [Fe/H], and have higher [Mg/Fe] with 3.5σ confidence. We conclude that halos not only dictate how much M* galaxies assemble but also modulate their chemical enrichment histories. Turning to our analysis at fixed M h , high-M* centrals are older, show lower [Fe/H], and have higher [Mg/Fe] for M h > 10 12 h –1 M⊙ with confidence >4σ. While massive passive galaxies are thought to form early and rapidly, our results are among the first to distinguish these trends at fixed M h . They suggest that high-M* centrals experienced unique early formation histories, either through enhanced collapse and gas fueling or because their halos were early forming and highly concentrated, a possible signal of galaxy assembly bias.

79 ASTRONOMY AND ASTROPHYSICS↗