Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “stagnant”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Modules of rupture and oxidation resistance of S12.55Al0.6O0.72N3.52 sialon

A Sialon of formula Si2.55Al0.6O0.72N3.52 was made from ball-milled alpha-Si3N4, AIN, and SiO2 by sintering the powder compacts at 1760 C for 4 hours in stagnant nitrogen. This Sialon had an average modulus of rupture ranging from 404 megapascals (58.6 ksi) at room temperature to 254 megapascals (36.8 ksi) at 1400 C. Oxidation tests at 1400 C in air showed it to have a parabolic oxidation rate constant less than or equal to 2.8x10 to the -10th power sq g/cm4 hr, which is smaller than that of any other Si3N4-base ceramic reported in the literature.

Arias, A.↗
NASA NTRS1979

Evaluation of a locally homogeneous model of spray evaporation

A model of spray evaporation which employs a second-order turbulence model in conjunction with the locally homogeneous flow approximation, which implies infinitely fast interphase transport rates is presented. Measurements to test the model were completed for single phase constant and variable density jets, as well as an evaporating spray in stagnant air. Profiles of mean velocity, composition, temperature and drop size distribution as well as velocity fluctuations and Reynolds stress, were measured within the spray. Predictions were in agreement with measurements in single phase flows and also with many characteristics of the spray, e.g. flow width, radial profiles of mean and turbulent quantities, and the axial rate of decay of mean velocity and mixture fraction.

Shearer, A. J.↗
NASA NTRS1979

Combustion of solid carbon rods in zero and normal gravity

In order to investigate the mechanism of carbon combustion, spectroscopic carbon rods were resistance ignited and burned in an oxygen environment in normal and zero gravity. Direct mass spectrometric sampling was used in the normal gravity tests to obtain concentration profiles of CO2, CO, and O2 as a function of distance from the carbon surface. The experimental concentrations were compared to those predicted by a stagnant film model. Zero gravity droptower tests were conducted in order to assess the effect of convection on the normal gravity combustion process. The ratio of flame diameter to rod diameter as a function of time for oxygen pressures of 5, 10, 15, and 20 psia was obtained for three different diameter rods. It was found that this ratio was inversely proportional to both the oxygen pressure and the rod diameter.

Spuckler, C. M.↗
NASA NTRS1979

Combustion of solid carbon rods in zero and normal gravity

In order to investigate the mechanism of carbon combustion, normal and zero gravity experiments were conducted in which spectroscopic carbon rods were resistance ignited and burned in an oxygen environment. Direct mass spectrometric sampling was used in the normal gravity tests to measure gas phase concentrations. The gas sampling probe was positioned near the circumference of the horizontally mounted carbon rods, either at the top or at angles of 45 or 90 deg from the top, and yielded concentration profiles of CO2, CO, and O2 as a function of distance from the carbon surface. The experimental concentrations were compared to those predicted by a stagnant film model. Zero gravity droptower tests were conducted in order to assess the effect of convection on the normal gravity combustion process. The ratio of flame diameter to rod diameter as a function of time for oxygen pressures of 5, 10, 15, and 20 psia was obtained for three different diameter rods. It was found that this ratio was inversely proportional to both the oxygen pressure and the rod diameter.

Spuckler, C. M.↗
NASA NTRS1980

Velocity and concentration distribution in a Stefan diffusion tube

Numerical solutions for the diffusion- and gravity-driven flow in a cylindrical Stefan tube were obtained from the coupled diffusion and Navier-Stokes equations of Peclet numbers 0.3, 1 and 5. Distributions of binary component concentrations and velocities were calculated. The mass average velocity is parabolic in nature, except at high Peclet numbers. The solvent is not stagnant but recirculates, even in the absence of gravity. Radial concentration gradients develop which act convectively destabilizing. Consequences for the deduction of diffusion coefficients from Stefan tube experiments are discussed.

Markham, B. L.↗
NASA NTRS1981

Numerical simulation of axisymmetric turbulent jet flow

The transport equations for the turbulent Reynolds stresses and energy dissipation rate in conjunction with the governing equations for the vorticity and stream function are numerically solved for in the case of an axisymmetric jet into stagnant surroundings. The time dependence of the equations is retained allowing for any transient results to be interpreted in terms of conditionally averaged flow quantities. The general form of the governing differential equations is presented as well as the numerical procedure used in the solution. Comments concerning the inherent limitations in solving the time-dependent set of equations are made and the versatility of the approach examined. Comparisons of the various components of the stationary Reynolds stress tensor are made with experimental results.

Gatski, T. B.↗
NASA NTRS1981

A simplified model of high pressure spray combustion

A simplified model of high-pressure spray combustion is examined. The analysis relies on a kappa-epsilon-g turbulence model in conjunction with the locally homogeneous flow (LHF) approximation of two-phase flow, which implies infinitely fast transport rates between the phases. High-pressure phenomena near the thermodynamic critical point are treated using the Redlich-Kwong equation of state. Predictions are compared with existing measurements of spray boundaries in a pressure-atomized n-pentane spray (Sauter mean diameter, approximately 30 microns) burning in stagnant air at 3, 6, and 9 MPa. The LHF model overestimates the rate of development of the flow, yielding spray lengths roughly 20% shorter than measured. Calibrated drop-life-history calculations suggest that finite interphase transport rates are the primary cause of the discrepancy.

Mao, C.-P.↗
NASA NTRS1982

A study of persistent elevated pollution episodes in the northeastern United States

To examine chemical transformation within stagnant air masses and the atmospheric processes acting upon such air masses, the United States EPA sponsored a study in the summer of 1980 in the northeastern region of the country. Ten research aircraft and several mobile and stationary surface monitoring platforms participated in an intensive measurement program between 16 July and 15 August 1980. Pollutants of interest included SO2, NO, NO(x), HC, O3, sulfate, nitrate, and aerosols in general. This paper summarizes the activities of these research aircraft. Three aircraft and one helicopter logged a total of 353 flight hours during 100 missions in the program. The flight patterns and data collected for each mission are documented. This summary will allow scientists who are interested in this data base to identify subsets of the data for model development.

Vaughan, W. M.↗
NASA NTRS1983

Measurements and predictions for nonevaporating sprays in a quiescent environment

Yule et al. (1982) have conducted a study of vaporizing sprays with the aid of laser techniques. The present investigation has the objective to supplement the measurements performed by Yule et al., by considering the limiting case of a spray in a stagnant environment. Mean and fluctuating velocities of the continuous phase are measured by means of laser Doppler anemometry (LDA) techniques, while Fraunhofer diffraction and slide impaction methods are employed to determine drop sizes. Liquid fluxes in the spray are found by making use of an isokinetic sampling probe. The obtained data are used as a basis for the evaluation of three models of the process, including a locally homogeneous flow (LHF) model, a deterministic separated flow (DSF) model, and a stochastic separated flow (SSF) model. It is found that the LHF and DSF models do not provide very satisfactory predictions for the test sprays, while the SSF model does provide reasonably good predictions of the observed structure.

Solomon, A. S. P.↗
NASA NTRS1982

Wake interference for a heated oscillating cylinder

Penney and Jefferson (1966) have studied heat transfer from an oscillating, horizontal wire. The present investigation has the objective to determine the governing parameters which indicate when interaction between an oscillating circular cylinder and its wake will reduce the apparent heat transfer coefficient in quasi-steady conditions, taking into account, if possible, also the determination of the approximate magnitude of the reduction. A definition is provided of a nondimensional vertical mass flux, representing the induced flow due to heating of the stagnant fluid. It is hypothesized that the flux is related to a natural convection parameter which describes the heating of the wake. For oscillation of a circular cylinder in air under the conditions studied, it is found that the application of a cross-flow correlation in a quasi-steady, transient analysis predicts heat transfer parameters in close agreement with experiment over a certain range, provided interaction with the heated wake is avoided.

Mceligot, D. M.↗
NASA NTRS1982

Gravitationally induced convection during directional solidification of off-eutectic Mn-Bi alloys

The effects of thermal and solute gradient, gravity induced convection during vertical directional solidification, on longitudinal macrosegregation of Bi and Mn rich off-eutectic starting compositions, has been studied as a function of composition, growth velocity and gravity vector orientation. Since the morphology of these alloys is characterized by an aligned, rodlike permanent magnet composite when grown cooperatively, the magnetic properties were used to measure composition segregation and the transition from dendritic to composite growth. Severe macrosegregation was observed in all cases studied and the degree of convection inferred by modeling the observed composition segregation using a stagnant film approach. Morphological stability was found to follow a constitutional supercooling-type law for both Bi and Mn rich compositions.

Pirich, R. G.↗
NASA NTRS1983

Photothermal degradation of ethylene/vinylacetate copolymer

Photothermal degradation studies were conducted on a 'stabilized' formulation of ethylene/vinyl acetate copolymer (EVA) in the temperature range 25-105 C under three different oxygen environments (in open air, with limited access to O2, and in a dark closed stagnant oven). These studies were performed in order to evaluate the utility of EVA as an encapsulation material for photovoltaic modules. Results showed that at low temperature (25 C), slow photooxidation of the polymer occurred via electronic energy transfer involving the UV absorber incorporated in the polymer. However, no changes in the physical properties of the bulk polymer were detected up to 1500 hours of irradiation. At elevated temperatures, leaching and evaporation of the additives occurred, which ultimately resulted in the chemical crosslinking of the copolymer and the formation of volatile photoproducts such as acetic acid.

Liang, R. H.↗
NASA NTRS1984

Mapping of glacial landforms from Seasat radar images

Glacial landforms in the drumlin drift belt of Ireland and the Alaska Range can be identified and mapped from Seasat synthetic-aperture radar (SAR) images. Drumlins cover 60 percent of the Ireland scene. The width/length ratio of individual drumlins can be measured on the SAR images, allowing regional differences in drumlin shape to be mapped. This cannot be done with corresponding Landsat multispectral scanner (MSS) images because of lower spatial resolution and because of shadowing effects that vary seasonally. The Alaska scene shows the extent and nature of morphological features such as medial and lateral moraines, stagnant ice, and fluted ground moraine in glaciated valleys. Perception of these features on corresponding Landsat MSS images is limited by seasonal diffrences in solar illumination. Because SAR is not affected by such differences or by cloud cover, it is particularly well suited for monitoring glacial movement. The disadvantage of distorted high-relief features on Seasat SAR images can be reduced in future SAR systems by modifying the radar illumination geometry.

Ford, J. P.↗
NASA NTRS1985

Determination of convective diffusion heat/mass transfer rates to burner rig test targets comparable in size to cross-stream jet diameter

Two sets of experiments have been performed to be able to predict the convective diffusion heat/mass transfer rates to a cylindrical target whose height and diameter are comparable to, but less than, the diameter of the circular cross-stream jet, thereby simulating the same geometric configuration as a typical burner rig test specimen located in the cross-stream of the combustor exit nozzle. The first set exploits the naphthalene sublimation technique to determine the heat/mass transfer coefficient under isothermal conditions for various flow rates (Reynolds numbers). The second set, conducted at various combustion temperatures and Reynolds numbers, utilized the temperature variation along the surface of the above-mentioned target under steady-state conditions to estimate the effect of cooling (dilution) due to the entrainment of stagnant room temperature air. The experimental information obtained is used to predict high temperature, high velocity corrosive salt vapor deposition rates in burner rigs on collectors that are geometrically the same. The agreement with preliminary data obtained from Na2SO4 vapor deposition experiments is found to be excellent.

Gokoglu, S. A.↗
NASA NTRS1986

Meteorite concentration mechanisms in Antarctica

The location of most Antarctic meteorite finds is on stagnant, highly ablative surfaces known as blue ice. The role of blue ice as transporter, concentrator, and preserver of specimens from the time of fall until find is discussed.

Annexstad, J. O.↗
NASA NTRS1986

Determination of convective diffusion heat/mass transfer rates to burner rig test targets comparable in size to cross-stream jet diameter

Two sets of experiments have been performed to be able to predict the convective diffusion heat/mass transfer rates to a cylindrical target whose height and diameter are comparable to, but less than, the diameter of the circular cross-stream jet, thereby simulating the same geometric configuration as a typical burner rig test specimen located in the cross-stream of the combustor exit nozzlle. The first set exploits the naphthalene sublimation technique to detetermine the heat/mass transfer coefficient under isothermal conditions for various flow rates (Reynolds numbers). The second set, conducted at various combustion temperatures and Reynolds numbers, utilized the temperature variation along the surface of the above-mentioned target under steady-state conditions to estimate the effect of cooling (dilution) due to the entrainment of stagnant room temperature air. The experimental information obtained is used to predict high temperature, high velocity corrosive salt vapor deposition rates in burner rigs on collectors that are geometrically the same. The agreement with preliminary data obtained from Na2S04 vapor deposition experiments is found to be excellent.

Gokoglu, S. A.↗
NASA NTRS1986

Advanced high temperature static strain sensor development

An examination was made into various techniques to be used to measure static strain in gas turbine liners at temperatures up to 1150 K (1600 F). The methods evaluated included thin film and wire resistive devices, optical fibers, surface acoustic waves, the laser speckle technique with a heterodyne readout, optical surface image and reflective approaches and capacitive devices. A preliminary experimental program to develop a thin film capacitive device was dropped because calculations showed that it would be too sensitive to thermal gradients. In a final evaluation program, the laser speckle technique appeared to work well up to 1150 K when it was used through a relatively stagnant air path. The surface guided acoustic wave approach appeared to be interesting but to require too much development effort for the funds available. Efforts to develop a FeCrAl resistive strain gage system were only partially successful and this part of the effort was finally reduced to a characterization study of the properties of the 25 micron diameter FeCrAl (Kanthal A-1) wire. It was concluded that this particular alloy was not suitable for use as the resistive element in a strain gage above about 1000 K.

Hulse, C. O.↗
NASA NTRS1987

On the 3-dimensional structure of plasmoids

The hypothesis that the IMF penetrates plasmoids causing them to be three- rather than two-dimensional is tested by comparing observations of By within plasmoids and related tail structures to upstream IMF By data. The magnetic topologies that result from the mergings of closed plasma sheet flux tubes and open tail lobe flux tubes at a near-earth neutral line, and merging near the tail flanks are described and studied. The particle signals and isotropic electron distributions are examined. It is observed that the IMF By penetrates plasmoids and that their structure is three-dimensional. In the three-dimensional model of plasmoids the reconnected plasma sheet field lines form a magnetic flux-ropelike structure. The three-dimensional model is utilized to analyze stagnant, slowly moving and earthward moving structures.

Hughes, W. J.↗