Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “stable glass”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Low-temperature paddlewheel effect in glassy solid electrolytes

Glasses are promising electrolytes for use in solid-state batteries. Nevertheless, due to their amorphous structure, the mechanisms that underlie their ionic conductivity remain poorly understood. Here, ab initio molecular dynamics is used to characterize migration processes in the prototype glass, 75Li2S–25P2S5. Lithium migration occurs via a mechanism that combines concerted motion of lithium ions with large, quasi-permanent reorientations of PS4 3- anions. This latter effect, known as the ‘paddlewheel’ mechanism, is typically observed in high temperature crystalline polymorphs. In contrast to the behavior of crystalline materials, in the glass paddlewheel dynamics contribute to Lithium-ion mobility at room temperature. Paddlewheel contributions are confirmed by characterizing spatial, temporal, vibrational, and energetic correlations with Lithium motion. Furthermore, the dynamics in the glass differ from those in the stable crystalline analogue, γ-Li3PS4, where anion reorientations are negligible and ion mobility is reduced. These data imply that glasses containing complex anions, and in which covalent network formation is minimized, may exhibit paddlewheel dynamics at low temperature. Consequently, these systems may be fertile ground in the search for new solid electrolytes.

36 MATERIALS SCIENCE↗

Silicone Resins for Vat Polymerization Printing

This paper reviews research of silicone-based resins for vat polymerization printing (VPP). Silicone resins are used commonly in other 3D printing technologies because of their desirable properties. Silicones are chemically inert, oxidatively, and thermally stable, and have the lowest glass transition temperature of any polymer. Creating silicone resins processable by VPP is challenging because VPP requires low viscosity liquid resin that quickly photopolymerizes. This review will summarize VPP technologies, resin chemistries, and recent research of silicone VPP resins.

36 MATERIALS SCIENCE↗

Ionized polycyclic aromatic hydrocarbons and the diffuse interstellar bands

A good case has recently been made that the unidentified infrared emission features arise from positively charged, partially hydrogenated polycyclic aromatic hydrocarbons (PAHs). In this letter it is suggested that these exceedingly stable ions are also the carriers of the diffuse interstellar bands. Although a large variety of PAH isomers is possible, the more condensed forms are substantially more stable than the less condensed forms and are expected to be dominant in the harsh interstellar environment. While neutral PAHs do not absorb in the visible, their ionized counterparts do. Because of their low ionization potential, a substantial fraction of the interstellar PAHs will be ionized. Visible spectra of the most stable PAH cations isolated in glasses are compared directly to the interstellar band spectra. Although the laboratory spectra are on an extremely compressed scale and solid state shifts are present, the comparison is favorable. Since little information is available concerning the spectroscopic properties of these species in the gas phase, a considerable amount of laboratory and theoretical work is called for to test this hypothesis.

Crawford, M. K.↗

High temperature glass thermal control structure and coating

A high temperature stable and solar radiation stable thermal control coating is described which is useful either as such, applied directly to a member to be protected, or applied as a coating on a re-usable surface insulation (RSI). It has a base coat layer and an overlay glass layer. The base coat layer has a high emittance, and the overlay layer is formed from discrete, but sintered together glass particles to give the overlay layer a high scattering coefficient. The resulting two-layer space and thermal control coating has an absorptivity-to-emissivity ratio of less than or equal to 0.4 at room temperature, with an emittance of 0.8 at 1200 F. It is capable of exposure to either solar radiation or temperatures as high as 2000 F without significant degradation. When used as a coating on a silica substrate to give an RSI structure, the coatings of this invention show significantly less reduction in emittance after long term convective heating and less residual strain than prior art coatings for RSI structures.

Stewart, D. A.↗

Preparation of illite coated geomaterial microfluidic surfaces: Effect of salinity and heat treatment

Unique characteristics of clay (e.g., high surface area, deficiency in positive charges) make any clay abundant shales a good source of adsorbed gas. However, the presence of clay in porous media can also affect shale rock's producibility. The clay-water interaction can cause significant swelling and fines migration in the formation and impair the overall hydrocarbon recovery from shale. Geomaterial micromodels, developed by functionalizing traditional glass or PDMS surfaces with geomaterials (e.g., calcite, Quartz, clay), can represent the physicochemical properties of the natural porous media and have been used during the last few years to understand and evaluate the solid-fluid physicochemical interactions. Here, this study focuses on developing a clay-coated geomaterial surface and investigates the effect of base fluid's salinity on clay adsorption to the glass surface. Glass capillary tubes and straight channel borosilicate glass micromodels are coated with Illite clay to represent the pore-scale clay chemistry of Caney Shale, a Mississippian unconventional play in Southern Oklahoma, USA. 10 wt% of Illite clay slurries made with brines of four different salinities are used to coat the glass-capillary tubes to understand the effect of salinity in clay adsorption on the glass surface and overall coating quality. To achieve a stable coating and evaluate the impact of heat treatment on coating's stability, straight channel glass flow cells coated with Illite clay are heat-treated at low (25 °C) and high temperature (125 °C), and the results are compared with an untreated coated surface. Flooding tests were carried out with brines of different salinities on the coated surface to evaluate the stability of the coating. The experimental results indicated a strong relationship between the brine's salinity and the adsorption of clay particles on the glass surface. An increase in brine concentration resulted in improved adsorption of clay particles on the glass surface. Experiments involving heat treating the glass surface following the coating demonstrated significant improvement in the stability of the coating.

02 PETROLEUM↗

PREPARATION OF CLAY-COATED GLASS SURFACES FOR MICROFLUIDICS-BASED STUDY ON CLAY-FLUID INTERACTIONS

Unique characteristics of clay, even though make any clay abundant shales a good source of adsorbed gas, make them equally difficult to produce. The clay-water interaction can cause significant swelling and fines migration in the shale formation, both of which can significantly impair the overall hydrocarbon recovery from shale. Geomaterial micromodels, developed by functionalizing traditional glass or PDMS surface with geomaterials (e.g., calcite, quartz, clay) can represent the physico-chemical properties of the natural porous media and have been used during the last few years to understand and evaluate the solid-fluid physicochemical interactions. This study focuses on developing a clay-coated geomaterial surface and investigates the effect of base fluid's salinity on clay adsorption to the glass surface. Glass capillary tubes and straight channel borosilicate glass micromodels are coated with Illite clay minerals to represent the pore-scale clay chemistry of Caney Shale, a Mississippian unconventional play in Southern Oklahoma, USA. 10 wt.% of Illite clay slurries made with brines of four different salinities are used to coat the glass-capillary tubes to understand the effect of salinity in clay adsorption on the glass surface and overall coating quality. To achieve a stable coating and evaluate the impact of heat treatment on coating's stability, straight channel glass flow cells coated with Illite clay are heat-treated at low (25 °C) and high temperature (125 °C). Dynamic flooding tests were carried out with brines on the coated surface to evaluate the stability of the coating. The experiments' outcome indicated a strong relationship between the brine's salinity and the adsorption of clay particles on the glass surface. An increase in brine concentration resulted in improved adsorption of clay particles on the glass surface. Experiments involving heat treating the glass surface following the coating demonstrated significant improvement in the stability of the coating.

02 PETROLEUM↗

Carbazole-Based Hole-Transport Materials for High-Efficiency and Stable Perovskite Solar Cells

As organic–inorganic halide perovskite solar cells (PSCs) near commercialization, stability challenges during real-world conditions, such as durability at elevated temperatures, still need to be addressed. We have previously reported that doping of triarylamine-based hole-transport layers (HTLs) with a triarylamine-based radical cation salt (EHCz-3EtCz/EH44-ox) leads to enhanced PSC stability at elevated temperatures. While it was shown the radical cation dopant did not need to be identical to the HTL matrix, little was known about dopant exchange to realize the maximum impact on device-level properties (e.g., increase in low intrinsic conductivity, mobility, hydrophobic properties, ease of synthesis, and thermal stability). In this paper, we study the impact of dopant exchange among stable, low-cost, high-glass-transition temperature (Tg), and easily synthesized triarylamine-based HTL and radical triarylamine cation salts as dopants. Using EH44-ox as dopant leads to the improved device-level power conversion efficiency (PCE) for all HTL matrices assessed. Moreover, increasing the number of ethylhexyl chains from one to two per molecule and positioning these chains at the periphery rather than the core resulted in improved hydrophobicity. PSCs based on our HTL formulations have similar power conversion efficiencies (PCE) as those of PSCs based on commercially available HTLs while demonstrating greatly improved device-level stability at elevated temperatures.

14 SOLAR ENERGY↗

Compact, Broadband Infrared Spectrometer

Large-aperture, wide-angle, broad-band infrared spectrometer compact and light in weight. Based on double-pass version of Schmidt optical system that acts as both collimator and camera. Because optical system contained in piece of solid glass, it is mechanically and thermally stable. System made of water-free fused silica to minimize absorption of infrared radiation. Although in principle made from single, solid piece, in practice made in two pieces cemented together. Fabrication easier and simpler if more cemented surfaces used so each optical surface grounded and polished like single lens element.

Page, Norman A.↗

Degradation of electro-optic components aboard LDEF

Re-measurement of the properties of a set of electro-optic components exposed to the low earth orbital environment aboard the Long Duration Exposure Facility (LDEF) indicates that most components survived quite well. Typical components showed some effects related to the space environment unless well protected. The effects were often small but significant. Results for semiconductor infrared detectors, lasers, LED's, filter, mirrors, and black paints will be presented. Semiconductor detectors and emitters were scarred but reproduced their original characteristics. Spectral characteristics of multi-layer dielectric filters and mirrors were found to be altered and degraded. Increased absorption in black paints indicates an increase in absorption sites, giving rise to enhanced performance as coatings for baffles and sunscreens. We find plastics and multi-layer dielectric coatings to be potentially unstable. Semiconductor devices, metal, and glass are more likely to be stable.

Blue, M. D.↗

Crosslinked polyimides prepared from N-(3-ethynylphenyl)maleimide

The compound N-(3-ethynylphenyl)maleimide (NEPMI) was used to prepare thermally stable, glassy polyimides which did not exhibit glass transition temperatures below 500 C. NEPMI was blended with the maleimide of methylene dianiline (BMI) and heated to form the polyimide. NEPMI was also mixed with Thermid 600 R, a commercially available bisethynyl oligomeric material, and heated to form a thermally stable, glassy polyimide. Lastly, NEPMI was blended with both BMI and Thermid 600 R to form thermally stable, glassy polyimides.

Gerber, Margaret K.↗

Polymer Coatings Reduce Electro-osmosis

Poly(ethylene glycol) film controls electrostatic potential. Electro-osmosis in quartz or glass chambers reduced or reversed by coating inside surface of chambers with monomacromolecular layers of poly(ethylene glycol). Stable over long times. Electrostatic potential across surface of untreated glass or plastic chamber used in electro-phoresis is negative and attracts cations in aqueous electrolyte. Cations solvated, entrains flow of electrolyte migrating toward cathode. Electro-osmotic flow interferes with desired electrophoresis of particles suspended in electrolyte. Polymer coats nontoxic, transparent, and neutral, advantageous for use in electrophoresis.

Herren, Blair J.↗

Mechanically and thermally stable maser cavity resonator

New type cavity resonator is designed for hydrogen maser. Resonator consists of three pieces of glass-ceramic material having extremely low thermal coefficient of expansion and provides very stable mechanical tuning.

Vessot, R. F. C.↗

Status of Gr/glass composites technology at UTOS

The TSC (Thermally Stable Composite) refers to a family of graphite reinforced glass matrix composite materials developed by UTOS. This fiber matrix combination exhibits low coefficients of thermal expansion (CTE), exceptional dimensional stability, high specific strength and stiffness, adequate fracture toughness, and space environment compatibility. The dimensional stability of a TSC mirror structure was experimentally characterized at the Steward Observatory. Preliminary results indicate that TSC is significantly more thermally stable than most current structural composite materials. In addition, the use of lower CTE glass matrix materials, such as 96 percent silica glass, have the potential for producing graphite/glass panels with expansion rates and stability comparable to that of fused silica.

Mayor, Ramon A.↗

Impact- and Thermal-Resistant Epoxy Resin Toughened with Acacia Honey

High performance polymers with bio-based modifiers are promising materials in terms of applications and environmental impact. In this work, raw acacia honey was used as a bio-modifier for epoxy resin, as a rich source of functional groups. The addition of honey resulted in the formation of highly stable structures that were observed in scanning electron microscopy images as separate phases at the fracture surface, which were involved in the toughening of the resin. Structural changes were investigated, revealing the formation of a new aldehyde carbonyl group. Thermal analysis confirmed the formation of products that were stable up to 600 °C, with a glass transition temperature of 228 °C. An energy-controlled impact test was performed to compare the absorbed impact energy of bio-modified epoxy containing different amounts of honey with unmodified epoxy resin. The results showed that bio-modified epoxy resin with 3 wt% of acacia honey could withstand several impacts with full recovery, while unmodified epoxy resin broke at first impact. The absorbed energy at first impact was 2.5 times higher for bio-modified epoxy resin than it was for unmodified epoxy resin. In this manner, by using simple preparation and a raw material that is abundant in nature, a novel epoxy with high thermal and impact resistance was obtained, opening a path for further research in this field.

36 MATERIALS SCIENCE↗

Recent development in organic scintillators

Discussion on recent developments of organic scintillators includes studies of organic compounds that form glass-like masses which scintillate and are stable at room temperature, correlations between molecular structure of organic scintillators and self-quenching, recently developed fast scintillators, and applications of liquid-scintillation counters.

Horrocks, D. L.↗

N2 broadening parameters of ozone at 9.6 microns

Pressure-broadening coefficients were determined for 156 O3 absorption lines made with the Fourier-transform spectrometer at the McMath Solar Telescope of the Kitt Peak National Observatory in the 9-micron region, with a resolution of 0.005/cm. O3 prepared from O2 by silent arc discharge and collected on cold silica gel was held at stable concentrations over 50 percent in a glass or stainless-steel cell with a rock-salt window, and broadened with dry N2. Interferograms were made in several scans of the interferometer during 30 min. The pressure-broadening coefficients were calculated by an iterative least-squares approach, a synthetic spectrum was constructed and compared to the actual spectrum, and the parameters were varied to achieve the best fit. It is shown that the estimated precision of the values reported is about 7 percent, and that the deviation from the theoretical calculations of Tejwani and Yeung (1975) averaged 7.6 percent (a small number of large discrepancies having been excluded).

Margolis, J. S.↗

A thermally modified polymer matrix composite material with structural integrity to 371 C

The potential for utilizing surface coatings to inhibit the thermal oxidation of polymer matrix composites was studied. Isothermal, inert gas exposures of graphite/PMR-15 composites indicated that after an initial loss of weight, no significant amounts of thermal degradation products are given off during high temperature exposures in the absence of oxygen. As long as a coating remains effective, the composite material should remain stable. It was also found that the glass transition temperature T sub g of the matrix resin could be increased to values in excess of 400 C. This resulted in measured short beam shear strengths of 75.9 MPa (11 Ksi), flexural strengths of 1172 MPa (170 Ksi) and flexural moduli of 141 GPa (20.5 Msi) for the material at a test temperature of 371 C. The treatment that was used caused a decrease in the PMR-15 resin density from 1.31 to 1.29 gm/cc. It was concluded that state-of-the-art composites, protected by oxygen-impervious coatings, can be used as materials of construction with structural integrity to at least 371 C and possibly above.

Bowles, Kenneth J.↗