SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Description of a spectroradiometer system that measures the intensity of incident and reflected radiation from 0.37 to 2.52 microns and emitted radiation from 2.76 to 13.88 microns. The system is designed to operate in an outdoor environment. Provisions exist for photographic annotation of field data setups.
Fundamental concepts on which to base a detailed design for a Shuttle Modular Scanning Spectroradiometer were developed, and a preliminary design is presented. The recommended design features modularity and flexibility. It includes a 75-cm f/1.7-telescope assembly in an all-reflective Schmidt configuration, a solid state scan system (pushbroom) with high resolution over a 15 deg field of view, and ten detector channels covering the spectral range from 0.45 to 12.5 micrometers. It uses charge transfer device techniques to accommodate a large number of detector elements for earth observation measurements. Methods for in-flight radiometric calibration, for image motion compensation, and for data processing are described. Recommendations for ground support equipment are included, and interfaces with the shuttle orbiter vehicle are illustrated.
A brief description of the Exotech model 20-C field spectroradiometer which measures the spectral radiance of a target in the wavelength ranges 0.37 to 2.5 microns (short wavelength unit), 2.8 to 5.6 microns and 7.0 to 14 microns (long wavelength unit) is given. Wavelength calibration of long wavelength unit was done by knowing the strong, sharp and accurately known absorption bands of polystyrene, atmospheric carbon dioxide and methyl cyclohexane (liquid) in the infrared wavelength region. The spectral radiance calibration was done by recording spectral scans of the hot and the cold blackbodies and assuming that spectral radiance varies linearly with the signal.
A remote sensing system for use in light aircraft is discussed with attention to its applications in measuring geologic zones of alteration, vegetation canopies, and the spectral properties of water bodies. A parallel electro-optical input spectroradiometer configuration with 500 channels operating in the 400-1100 nm region is described. A resolution of 18 meters square from an altitude of 600 m at 200 kmh is obtained with 4-digit spectral radiance data at 2.5 spectra/sec on a 9-track tape in computer compatible format.
A brief description of the Exotech model 20C field spectroradiometer, which measures the spectral radiance of a target in the wavelength ranges from 0.37 to 2.5 microns (short wavelength unit), 2.8 to 5.6 microns, and 7.0 to 14 microns (long wavelength unit) is given. It is a rugged field instrument which uses four circular-variable-filters to get wavelength scan. Wavelength calibration of the long wavelength unit was done by use of the strong, sharp, and accurately known absorption bands of polystyrene, atmospheric carbon dioxide, and methyl cyclohexane (liquid) in the IR wavelength region. The spectral radiance calibration was done by recording spectral scans of the hot and the cold blackbody targets and assuming that spectral radiance varies linearly with the signal.
The data base software system, LARSPEC, is discussed and the data base format for agronomic, meteorological, spectroradiometer, and multiband radiometer data is described. In addition, the contents and formats of each record of data and the wavelength tables are listed and the codes used for some of the parameters are described.
During the Summer of 1987, the Advanced Solidstate Array Spectroradiometer (ASAS) was installed and flown on the NASA Ames C-130 in support of the First International Field Experiment (FIFE) missions. The study site was over the grassland areas of the Konza Prairie in Kansas. The data collected with ASAS during these flights has been used to produce the first nearly simultaneous multiangular/multispectral images of selected terrestrial study sites. This data will be valuable in the study of surface bidirectional reflectance and albedo. The data will also be useful for the development of data analysis algorithms for future spaceborne instruments such as the Goddard MODIS-T and JPL's HIRIS. The flight data acquired is further analyzed.
The advanced solid-state array spectroradiometer (ASAS), an airborne imaging spectrometer with 30 spectral channels extending from 450-880 nm, is described. Modifications to the sensor mounting technique changed the ASAS from a fixed nadir viewing instrument to a sensor capable of multiple direction observations of surface bidirectional reflectance distribution functions. The system was flown on the NASA Ames C130 aircraft to obtain surface bidirectional reflectance measurements of vegetation; it demonstrated excellent reliability and radiometric stability.
A new oceanographic instrument, the MER-2020, has been developed for the long term measurement of bio-optical properties. This instrument is a self-contained reflectance spectroradiometer with 40 megabytes of internal data storage and battery power permitting deployments for as long as 6 months. It can serve as the control and recording center for a variety of other sensors including fluorometers, transmissometers, temperature and conductivity probes. Instruments of this type were deployed at depths to 70 meters on a 5000 meter mooring during the BIOWATT experiment between February and November 1987. Measurements of the spectral diffuse attenuation coefficient and of the remote sensed reflectance from the ten month period in 1987 in the Northern Sargasso Sea are presented. In addition, the temperature, pressure, package orientation and sunlight stimulated natural fluorescence of phytoplankton are discussed. This instrument will be a key part of in situ optical calibration for future remote color sensors, and presently permits direct measurement of long term optical variability, important in visibility and communication problems.
The scientific objectives, instrument concept, and data plan for the multiangle imaging spectroradiometer (MISR), an experiment proposed for the EOS (Earth Observing System) mission, are described. MISR is a pushbroom imaging system designed to obtain continuous imagery of the sunlit Earth at four different view angles (25.8, 45.6, 60.0, and 72.5 deg relative to the vertical at the earth's surface), in both the forward and aftward directions relative to nadir, using eight separate cameras. Observations will be acquired in four spectral bands, centered at 440, 550, 670, and 860 nm. Data analysis algorithms will be applied to MISR imagery to retrieve the optical, geometric, and radiative properties of complex, three-dimensional scenes, such as aerosol-laden atmospheres above a heterogeneously reflecting surface, nonstratified cloud systems, and vegetation canopies. The MISR investigation will address a number of scientific questions concerning the climatic and ecological consequences of many natural and anthropogenic processes, and will furnish aerosol information necessary for atmospheric corrections of surface images.
An overview of the ASAS data acquired in support of the 1989 field experiments is presented and data quality is discussed. The precision of the ASAS data is considered through the presentation of SNRs derived from both field and laboratory data. ASAS is an airborne, off-nadir pointing, imaging spectroradiometer that acquires digital image data for 29 visible and near-infrared spectral bands (465 to 871 nm) with a spectral resolution of 15 nm. Surfaces observed for the field experiments include volcanic surfaces and a playa within a sparsely vegetated semiarid ecosystem, grass canopies within a prairie ecosystem, and tree canopies within a northern forest ecosystem. It is shown that calibrated ASAS data are sufficiently exact for investigations of the directional distribution of radiation scattered from terrestrial surfaces.
The Multi-angle Imaging SpectroRadiometer (MISR) experiment is an Instrument Investigation in the planning stages for the first NASA Earth Observing System polar platform, EOS-A. MISR will routinely acquire multispectral images of the angular reflectance signatures of terrestrial scenes. Scientific objectives include study of the climatic and environmental impacts of atmospheric aerosols, characterization of heterogeneous cloud fields and their impact on the shortwave radiation budget, development of surface bidirectional reflectance and albedo models for land surface climatology studies, and investigation of biosphere-atmosphere interactions and ecosystem change. This paper describes the MISR investigation, instrument, and data products.
The moderate resolution imaging spectroradiometer (MODIS) is a NASA facility instrument that is being designed for flight on the Earth Observing System (EOS) series of missions. It is designed to measure biophysical states and dynamics of the land, atmosphere, and ocean. Plans are required for use of other instruments that will be accompanying MODIS on the EOS missions, such as the High-Resolution Imaging Spectrometer (HIRIS) and the Multi-angle Imaging Spectro-Radiometer (MISR). The HIRIS instrument, a spectrometer operating in the visible to shortwave infrared parts of the spectrum, would be employed in combination with the MODIS to understand the impact of sampling the spectrum and the effects of land cover mixtures within the MODIS pixel. The MISR will help in understanding the effects of anisotropy in reflected solar radiation. Both instruments will work in combination with MODIS to better quantify the effects of the atmosphere on observations of surface properties.
The Moderate Resolution Imaging Spectroradiometer-Nadir (MODIS-N) is a key observing instrument to be flown on the Earth Observing System (EOS). The MODIS-N is being built under contract to NASA by the Santa Barbara Research Center. MODIS-N is a 36-band instrument with bands chosen in the visible through the emitted thermal IR part of the electromagnetic spectrum to observe key features of the Earth's land and ocean surfaces plus the properties of clouds and other constituents in the troposphere. To provide improved radiometric accuracy, several on-board approaches are used to monitor the calibration of the instrument. The calibration accuracy requirements are 5 percent absolute in the reflected solar radiation observations, 2 percent relative to the sun, and 1 percent absolute in the emitted thermal IR. Requirements for georeferencing of observations are still under study. At the present time, it appears that MODIS-N pixels can be georeferenced to better than 500 meters based on the EOS pointing knowledge capabilities.
Data collection using the Advanced Solid-state Array Spectroradiometer (ASAS) during the Hydrologic Atmospheric Pilot Experiment in the Sahel (HAPEX-II Sahel) field campaign in the Republic of Niger, West Central Africa from 22 Aug. to 19 Sep. 1992 is documented. Details on the ASAS system such as the hardware, data collection methods, information on system calibration, and data processing procedures are included. The ASAS configuration deployed for HAPEX-II Sahel contains several new components, including a new sensor array and pointing system. Because of this, new calibration procedures are being developed at the same time that the first ASAS images from HAPEX-II Sahel are being processed. These new calibration procedures will be documented in a future publication.
The design of an Earth remote sensing sensor, such as the Multi-angle Imaging SpectroRadiometer (MISR), begins with a set of science requirements that determine a set of instrument specifications. It is required that the sensor meet these specifications across the image field, over a range of sensor operating temperatures, and throughout mission life. In addition, data quality must be maintained irrespective of bright objects, such as clouds, within the scene, or out-of-field glint sources. During the design phase of MISR, many refinements to the conceptual design have been made to insure that these performance criteria are met. These design considerations are the focus of this paper. Spectral stability with field angle, scene polarization insensitivity, and LTV exposure hardness have, for example, been enabled through a telecentric optical design, a gaussian shaped filter spectral profile used in conjunction with a Lyot depolarizer, and contamination prevention through consideration of material choices and handling procedures. Spectral, radiometric, and MTF stability of the instrument assures the scientific community that MISR imagery can be used for highly accurate aerosol, bi-directional reflectance distribution function (BRDF), and cloud studies.
Following the 1999 launch of the Earth Observing System (EOS) Moderate Resolution Imaging Spectroradiometer (MODIS), the capability exists to produce global snow-cover maps on a daily basis at 500-m resolution. Eight-day composite snow-cover maps will also be available. MODIS snow-cover products are produced at Goddard Space Flight Center and archived and distributed by the National Snow and Ice Data Center (NSIDC) in Boulder, Colorado. The products are available in both orbital and gridded formats. An online search and order tool and user-services staff will be available at NSIDC to assist users with the snow products. The snow maps are available at a spatial resolution of 500 m, and 1/4 degree x 1/4 degree spatial resolution, and provide information on sub-pixel (fractional) snow cover. Pre-launch validation work has shown that the MODIS snow-mapping algorithms perform best under conditions of continuous snow cover in low vegetation areas, but can also map snow cover in dense forests. Post-launch validation activities will be performed using field and aircraft measurements from a February 2000 validation mission, as well as from existing satellite-derived snow-cover maps from NOAA and Landsat-7 Enhanced Thematic Mapper Plus (ETM+).
The Moderate Resolution Imaging Spectroradiometer (MODIS) is a major observational capability flying on the Earth Observing System (EOS) AM-1 "Terra" mission. This mission is to go into orbit in late 1999 or very early 2000. The MODIS was developed to provide improved observations of land, ocean, and atmosphere features relative to "heritage instruments" such as the NOAA Advanced Very High Resolution Radiometer (AVHRR), the Nimbus Coastal Zone Color Scanner (CZCS)and the SeaStar/SeaWiFS instruments, in particular. In addition the MODIS should provide complementary observations to the Landsat-7 Thematic Mapper and the NOAA HIRS instrument. There has been considerable effort to include capabilities or plans to characterize and assure calibration of the instrument data. These efforts include on on-board blackbody (BB), a solar diffuser (SID), a solar diffuser stability monitor (SDSM), and a spectral radiometric calibration assembly (SDSM). These devices, along with careful analyses of scenes acquired during orbit, are expected to allow comparisons with pre-launch expectations regarding spatial performance, spectral performance, and radiometric performance. In addition deep space observations and observations of the moon are to be used to characterize instrument performance. The purpose of this paper is to provide quantitative comparisons, as results become available from the Terra MODIS, to heritage instruments, pre-launch expectations and specifications.