Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “source range”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

A Regression Method for Comparing Launch Zone Ranges Derived From Different Sources

In modern fighter aircraft air-to-air missile launch acceptable ranges (LARs) are provided to the pilot for his launch decision. These LARs are calculated in the avionic software, using very simple algebraic equations and algorithms, that attempt to model complex missile behavior. Frequently these algorithms are revised to reflect inaccuracies discovered, when comparisons are made with missile six degree-of-freedom (6-DOF) simulations. The process of modifying this software has become expensive. In the past, these simple LAR generators were modified based only on subjective judgmental approach, with little regard to the missile range design limits. With reduced budgets a more rational methodology should be taken to assess whether or not simple fighter LAR generators need to be modified. Any LAR generator can produce large amounts of range (minimum and maximum) data over the board engagement limits of modem fighter and air-to-air missiles. This infinite population lends itself to some statistical methodology to access simple LAR accuracy and the need for software modification. The methodology should produce statistical parameters for use in the decision making process of modifying a simple fighter LAR generator. This paper presents a regression method, based on a missile range design limit philosophy. Acceptance criteria from the regression method are given that provide simple statistical parameters to aid in this decision making process.

Flight Testing↗
NASA NTRS1995

Discovery of a transient MeV range gamma-ray source

The University of California, San Diego (UCSD)/MIT hard X-ray and gamma-ray instrument on the HEAO 1 surveyed the region near the Galactic center 3 times during its lifetime in 1977-1979. During the 1977 September-October scan, a gamma-ray source was detected south of the Galactic center. The source was below the threshold sensitivity in the spring and fall of 1978. The source was detected with the medium energy phoswich scintillation counters which operated over the 80 keV-2 MeV range, had an area of 42 sq cm each, and a 17 deg FWHM aperture. The error box for the source is centered on l = 2.4 deg, b = -12.2 deg, with a 90% confidence error circle of approximately 3.5 deg radius. The flux in the 333-635 keV range was (1.89 +/- 0.29) x 10(exp -5) photons/(sq cm s keV) and was constant within statistics during the 1 month period the source was in the field of view. The spectrum can be characterized as a Gaussian in the range 300 less than or = E less than or = 650 keV, with a FWHM of 249 +/- 51 keV centered on 461 +/- 22 keV. The flux of this broad Gaussian is (6.6 +/- 1.1) x 10(exp -3) photons/(sq cm s). The source is tentatively identified with the 5.57 hr period low-mass X-ray-emitting binary system 1H 1822-371. Assuming this is correct, the ratio of gamma-ray to X-ray luminosity during the outburst was about 5; at a distance of 8 kpc, the gamma ray luminosity is 4 x 10(exp 37) ergs. The emission may be interpreted as a positron-pair plasma ejected from a compact object, possibly a black hole, and annihilating in a thick accretion disk surrounding the object.

Briggs, M. S.↗
NASA NTRS1986

Multiband far-infrared observations of the NGC 6334 complex

Multiband far-infrared (20-155 microns) observations of the large H II region/molecular cloud complex NGC 6334 are presented. The observations were performed simultaneously in four bands with effective wavelengths 21, 42, 71, and 134 microns. Eight far-infrared sources were detected which cover the range from sources with little of no continuum radio emission to well-developed H II regions. Maps of dust temperature and far-infrared optical depth of the complex are presented which reveal large-scale variations in the color temperature and optical depth. Star formation in the complex is discussed and it is concluded that a Rayleigh-Taylor instability generated by the gravitational attraction of the galactic plane can explain the regular separation of the far-IR sources.

Loughran, L.↗
NASA NTRS1986

Long range inhabited surface transportation system power source for the exploration of Mars (manned Mars mission)

A hydrogen-oxygen fuel cell system is identified as a viable power source for a long range inhabited surface transportation system for the exploration of Mars. Power system weights and power requirements are determined as a function of vehicle weight. For vehicles weighing from 2700 to 7300 kg in LEO, the total power system weight ranges from 1140 to 1860 kg, with the reactants and energy conversion hardware (fuel cells, reactant storage, and radiator) weighing 430 to 555 kg and 610 to 1110 kg, respectively. Vehicle power requirements range from 45 kW for a 2700 kg vehicle to 110 kW for a 7300 kg vehicle. Power system specific weights and power profiles for housekeeping and the operation of scientific equipment such as coring drills and power tools are also specified.

Lisa Kohout↗
NASA NTRS1998

Overview of the X-33 Extended Flight Test Range

On July 1, 1996, the National Aeronautics and Space Administration signed a Cooperative Agreement No. NCC8-115 with Lockheed Martin Skunk Works to develop and flight test the X-33, a scaled version of a reusable launch vehicle. The development of an Extended Test Range, with range instrumentation providing continuous vehicle communications from Edwards Air Force Base Ca. to landing at Malmstrom Air Force Base Montana, was required to flight test the mach 15 vehicle over 950 nautical miles. The cooperative agreement approach makes Lockheed Martin Skunk Works responsible for the X-33 program. When additional Government help was required, Lockheed "subcontracted" to NASA Field Centers for certain work. It was through this mechanism that Dryden Flight Research Center became responsible for the Extended Test Range. The Extended Test Range Requirements come from two main sources: 1) Range Safety and 2) Lockheed Martin Skunk Works. The range safety requirements were the most challenging to define and meet. The X-33 represents a vehicle that launches like a rocket, reenters the atmosphere and lands autonomously like an aircraft. Historically, rockets have been launched over the oceans to allow failed rockets to be destroyed using explosive devices. Such approaches had to be reconsidered for the X-33 flying over land. Numerous range requirements come from Lockheed Martin Skunk Works for interface definitions with the vehicle communication subsystems and the primary ground operations center, defined the Operations Control Center. Another area of considerable interest was the reentry plasma shield that causes "blackout" of the radio frequency signals, such as the range safety commands. Significant work was spent to analyze and model the blackout problem using a cooperative team of experts from across the country. The paper describes the Extended Test Range a, an unique Government/industry team of personnel and range assets was established to resolve design issues and accomplish the X-33 requirements. The paper will also provide an overview of the technical approaches used to meet program requirements. The advances used to develop the extended test range will be discussed to show how other hypersonic and Access to Space programs can benefit from the development of the extended test range. Acknowledgment: The work described in this paper was NASA supported through cooperative agreement NCC8-115 with Lockheed Martin Skunk Works.

Mackall, D.↗
NASA NTRS1977

Statistical properties of the sound and source fields of an axisymmetric jet

It is shown, by measurements and analysis, that the sound field radiated from subsonic jets as well as the source field are statistically axially symmetric at lower frequencies. In this range, the source field behaves like a line-quadrupole. The sources are coherent with respect to phase and compact with respect to acoustic wavelength. The results are developed in terms of correlation, coherence, and phase. A new and simpler form of the source integral is obtained in the range where the phases are linear functions of frequency through symmetry, translation, and rotation of the axis.

Maestrello, L.↗
NASA NTRS1992

Confidence range estimate of extended source imagery acquisition algorithms via computer simulations

Spatial acquisition using the sun-lit Earth as a beacon source provides several advantages over active beacon-based systems for deep-space optical communication systems. However, since the angular extend of the Earth image is large compared to the laser beam divergence, the acquisition subsystem must be capable of resolving the image to derive the proper pointing orientation. The algorithms used must be capable of deducing the receiver location given the blurring introduced by the imaging optics and the large Earth albedo fluctuation. Furthermore, because of the complexity of modelling the Earth and the tracking algorithms, an accurate estimate of the algorithm accuracy can only be made via simulation using realistic Earth images. An image simulator was constructed for this purpose, and the results of the simulation runs are reported.

Chen, CHIEN-C.↗
NASA NTRS1992

Picosecond sources for sub-centimeter laser ranging

Some of the tradeoffs involved in selecting a laser source for space-based laser ranging are outlined, and some of the recent developments in the laser field most relevant to space-based lasers for ranging and altimetry are surveyed. Laser pulse width and laser design are discussed. It is argued that, while doubled/tripled ND-host lasers are currently the best choice for laser ranging in two colors, they have the shortcoming that the atmospheric transmission at 355 nm is significantly poorer than it is at longer wavelengths which still have sufficient dispersion for two-color laser ranging. The life requirement appears to demand that laser diode pumping be used for space applications.

Krebs, Danny J.↗
NASA NTRS2010

Control of Carbon Nanotube Density and Tower Height in an Array

A method for controlling density or tower height of carbon nanotube (CNT) arrays grown in spaced apart first and second regions on a substrate. CNTs having a first density range (or first tower height range) are grown in the first region using a first source temperature range for growth. Subsequently or simultaneously, CNTs having a second density range (or second tower height range), having an average density (or average tower height) in the second region different from the average density (or average tower height) for the first region, are grown in the second region, using supplemental localized hearing for the second region. Application for thermal dissipation and/or dissipation of electrical charge or voltage in an electronic device are discussed.

Delzeit, Lance D.↗
NASA NTRS1978

Time-dependent spherically symmetric accretion onto compact X-ray sources

Analytical arguments and a numerical hydrodynamic code are used to investigate spherically symmetric accretion onto a compact object, in an attempt to provide some insight into gas flows heated by an outgoing X-ray flux. It is shown that preheating of spherically symmetric accretion flows by energetic radiation from an X-ray source results in time-dependent behavior for a much wider range of source parameters than was determined previously and that there are two distinct types of instability. The results are compared with observations of X-ray bursters and transients as well as with theories on quasars and active galactic nuclei that involve quasi-spherically symmetric accretion onto massive black holes. Models based on spherically symmetric accretion are found to be inconsistent with observations of bursters and transients.

Cowie, L. L.↗
NASA NTRS1999

A Digital Tectonic Activity Map of the Earth

The subject of neotectonics, covering the structures and structural activity of the last 5 million years (i.e., post-Miocene) is a well-recognized field, including "active tectonics," focussed on the last 500,000 years in a 1986 National Research Council report of that title. However, there is a cartographic gap between tectonic maps, generally showing all features regardless of age, and maps of current seismic or volcanic activity. We have compiled a map intended to bridge this gap, using modern data bases and computer-aided cartographic techniques. The maps presented here are conceptually descended from an earlier map showing tectonic and volcanic activity of the last one million years. Drawn by hand with the National Geographic Society's 1975 "The Physical World" map as a base, the 1981 map in various revisions has been widely reproduced in textbooks and various technical publications. However, two decades of progress call for a completely new map that can take advantage of new knowledge and cartographic techniques. The digital tectonic activity map (DTM), presented in shaded relief (Fig. 1) and schematic (Fig. 2) versions, is the result. The DTM is intended to show tectonism and volcanism of the last one million years, a period long enough to be representative of global activity, but short enough that features such as fault scarps and volcanos are still geomorphically recognizable. Data Sources and Cartographic Methods The DTM is based on a wide range of sources, summarized in Table 1. The most important is the digital elevation model, used to construct a shaded relief map. The bathymetry is largely from satellite altimetry, specifically the marine gravity compilations by Smith and Sandwell (1996). The shaded relief map was designed to match the new National Geographic Society world physical map (1992), although drawn independently, from the digital elevation model. The Robinson Projection is used instead of the earlier Van der Grinten one. Although neither conformal nor equal-area, the Robinson Projection provides a reasonable compromise and retains useful detail at high latitudes.

Lowman, Paul↗
NASA NTRS1990

Control of multiple resonant power processors in a multi-source system

Analysis and test results show that phasor-regulated, Mapham-derived resonant inverters can be paralleled to provide standardizing interfaces for multiple sources on a utility-type, aerospace power distribution bus. The basic sources do not require matching in any way, and may have grossly different characteristics. Fully stable system architectures with multiple sources, parallel/redundant distribution buses, and a wide variety of loads can be easily constructed and controlled. The commands and parameters available for system control allow for tight tolerance bus voltage control, and absolute power-sharing control from the various sources over the full range of possible source and load variations. That level of control enables simplified load power processing hardware and the distribution of losses to optimally load the source thermal control system. Positive control of all system performance and allocation of losses are not required by all missions or vehicles, and overall vehicle considerations do not always require the loads on vehicle energy sources and thermal control systems to be balanced. In those cases, power system control can be simplified, and a hierarchical set of defaults can be substituted for computer-generated or supervisory input commands to allow for stable, fully autonomous system operation.

Mildice, James↗
NASA NTRS1999

SIRTF Studies of Galaxy Formation and Evolution

The Space Infrared Telescope Facility (SIRTF) is a cornerstone of NASA's Origins program, and will complete NASA's family of Great Observatories when it is launched in December 2001. SIRTF will provide imaging with point source sensitivities ranging from a few microjanskies at 3.6 microns to several millijanskies at 160 microns, land spectroscopy of sources brighter than a millijansky over the 5 to 40 micron range. Over 75% of observing time during SIRTF's expected 5 year lifetime will be available to general investigators from the international community, with the first call for proposals in July 2000. I review SIRTF's capabilities and plans for the study of galaxy formation and evolution. This work was carried out at the Jet Propulsion Laboratory, California Institute of Technology, under contract to the National Aeronautics and Space Administration.

Eisenhardt, Peter↗
NASA NTRS1994

Airborne boundary layer flux measurements of trace species over Canadian boreal forest and northern wetland regions

Airborne heat, moisture, O3, CO, and CH4 flux measurements were obtained over the Hudson Bay lowlands (HBL) and northern boreal forest regions of Canada during July - August 1990. The airborne flux measurements were an integral part of the NASA/Arctic Boundary Layer Expedition (ABLE) 3B field experiment executed in collaboration with the Canadian Northern Wetlands Study (NOWES). Airborne CH4 flux measurements were taken over a large portion of the HBL. The surface level flux of CH4 was obtained from downward extrapolations of multiple-level CH4 flux measurements. Methane source strengths ranged from -1 to 31 mg m(exp -2)/d, with the higher values occurring in relatively small, isolated areas. Similar measurements of the CH4 source strength in the boreal forest region of Schefferville, Quebec, ranged from 6 to 27 mg m(exp -2)/d and exhibited a diurnal dependence. The CH4 source strengths found during the ABLE 3B expedition were much lower than the seasonally averaged source strength of 51 mg m(exp -2)/d found for the Yukon-Kuskokwim delta region of Alaska during the previous ABLE 3A study. Large positive CO fluxes (0.31 to 0.53 parts per billion by volume (ppbv) m/s) were observed over the inland, forested regions of the HBL study area, although the mechanism for the generation of these fluxes was not identified. Repetitive measurements along the same ground track at various times of day near the Schefferville site also suggested a diurnal dependence for CO emissions. Measurements of surface resistance to the uptake of O3 (1.91 to 0.80 s/cm) for the HBL areas investigated were comparable to those observed near the Schefferville site (3.40 to 1.10 s/cm). Surface resistance values for the ABLE 3B study area were somewhat less than those observed over the Yukon-Kuskokwim delta during the previous ABLE 3A study. The budgets for heat, moisture, O3, CO, and CH4 were evaluated. The residuals from these budget studies indicated, for the cases selected, a moderate net photochemical production of O3 present in the boundary layer over the HBL that coincided with an in situ destruction of CO, although the mechanism responsible for the destruction of CO was not identified. Results from the O3 budget analysis indicate the importance of in situ photochemical production and its possible dominance over surface deposition to the local O3 budget at the Schefferville site. Measurements of the in situ production of O3 indicated a direct relationship between the presence of biomass burning or large-scale pollution effects. Residuals from budget calculations for conserved quantities (heat, moisture, and CH4) were compared with their respective surface fluxes to provide a measure of the internal self-consistency of the flux measurements.

Ritter, John A.↗
NASA NTRS1976

Nonpropulsive applications of ion beams

Eight centimeter ion beam sources utilizing xenon and argon have been developed that operate over a wide range of beam energies and currents. Three types of processes have been studied: sputter deposition, ion beam machining, and ion beam surface texturing. The broad range of source operating conditions allows optimum sputter deposition of various materials. An ion beam source was used to ion mill laser reflection holograms using photoresist patterns on silicon. Ion beam texturing was tried with many materials and has a multitude of potential applications.

Hudson, W. R.↗
NASA NTRS1976

Nonpropulsive applications of ion beams

This paper describes the results of an investigation of the nonpropulsive applications of electric propulsion technology. Eight centimeter ion beam sources utilizing xenon and argon have been developed that operate over a wide range of beam energies and currents. Three types of processes have been studied - sputter deposition, ion beam machining, and ion beam surface texturing. The broad range of source operating conditions allows optimum sputter deposition of various materials. An ion beam source has also been used to ion mill laser reflection holograms using photoresist patterns on silicon. Ion beam texturing has been tried with many materials and has a multitude of potential applications.

Hudson, W. R.↗