Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solution processable”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Ta{sub 2}O{sub 5}-based high-K dielectric thin films from solution processed at low temperatures

Highlights: • Ta{sub 2}O{sub 5}–Al{sub 2}O{sub 3}–SiO{sub 2} (Ta:Al:Si = 8:1:1 atomic ratio) and Ta{sub 2}O{sub 5} films were processed from solutions. • The XRD-amorphous films, heated at or below 400 °C, are smooth (RMS < 0.5 nm). • The dielectric permittivity of the single- and mixed-oxide films heated at 400 °C is 27 and 22, respectively. • The current–voltage characteristics of the mixed-oxide films reveal the Poole–Frenkel behaviour. - Abstract: Ta{sub 2}O{sub 5}-based thin films were prepared by chemical solution deposition at temperatures not exceeding 400 °C. The aim of the work was to investigate the properties of high-K dielectric films of the ternary composition Ta{sub 2}O{sub 5}–Al{sub 2}O{sub 3}–SiO{sub 2} with the Ta:Al:Si = 8:1:1 atomic ratio. Pure Ta{sub 2}O{sub 5} samples were also prepared. All thin films were amorphous, and had smooth and flat surfaces with the average roughness of below 0.5 nm. The mixed oxide samples heated between 300 °C and 400 °C showed little difference in the dielectric permittivity with the values ranging from about 19 to 22. The Ta{sub 2}O{sub 5} film heated at 400 °C exhibited the highest permittivity of about 27. The current–voltage measurements revealed considerably improved characteristics of the Ta{sub 2}O{sub 5}–Al{sub 2}O{sub 3}–SiO{sub 2} samples within the investigated heating temperature range, with a significant overall decrease of the leakage currents in contrast to that of the pure Ta{sub 2}O{sub 5} thin films.

36 MATERIALS SCIENCE↗

Highly conductive p-type amorphous oxides from low-temperature solution processing

We report solution-processed, highly conductive (resistivity 1.3-3.8 m{Omega} cm), p-type amorphous A-B-O (A = Bi, Pb; B = Ru, Ir), processable at temperatures (down to 240 Degree-Sign C) that are compatible with plastic substrates. The film surfaces are smooth on the atomic scale. Bi-Ru-O was analyzed in detail. A small optical bandgap (0.2 eV) with a valence band maximum (VBM) below but very close to the Fermi level (binding energy E{sub VBM} = 0.04 eV) explains the high conductivity and suggests that they are degenerated semiconductors. The conductivity changes from three-dimensional to two-dimensional with decreasing temperature across 25 K.

36 MATERIALS SCIENCE↗

Excitonic lasing in solution-processed subwavelength nanosphere assemblies

Lasing in solution-processed nanomaterials has gained significant interest because of the potential for low-cost integrated photonic devices. Still, a key challenge is to utilize a comprehensive knowledge of the system’s spectral and temporal dynamics to design low-threshold lasing devices. Here, we demonstrate intrinsic lasing (without external cavity) at low-threshold in an ultrathin film of coupled, highly crystalline nanospheres with overall thickness on the order of ~λ/4. The cavity-free geometry consists of ~35 nm zinc oxide nanospheres that collectively localize the in-plane emissive light fields while minimizing scattering losses, resulting in excitonic lasing with fluence thresholds at least an order of magnitude lower than previous UV-blue random and quantum-dot lasers (<75 μJ/cm 2 ). Fluence-dependent effects, as quantified by subpicosecond transient spectroscopy, highlight the role of phonon-mediated processes in excitonic lasing. Subpicosecond evolution of distinct lasing modes, together with three-dimensional electromagnetic simulations, indicate a random lasing process, which is in violation of the commonly cited criteria of strong scattering from individual nanostructures and an optically thick sample. Subsequently, an electron–hole plasma mechanism is observed with increased fluence. Furthermore, these results suggest that coupled nanostructures with high crystallinity, fabricated by low-cost solution-processing methods, can function as viable building blocks for high-performance optoelectronics devices.

36 MATERIALS SCIENCE↗

Tuning Organic Semiconductor Packing and Morphology through Non-equilibrium Solution Processing (Final Report)

Organic semiconductors (OSCs) are a promising candidate to produce low-cost, large area, and flexible electronics. There has previously been successful development of organic field effect transistors (OFETs), photovoltaics (OPV), and bioelectronics using OSCs. Solution processing of these materials allows for the fabrication of large-area devices in the kinetic crystallization regime. The charge transport capabilities have been shown to depend on the morphology and molecular packing of the OSC within thin films. Our hypothesis is that solution processing conditions may significantly impact OSC morphology and as a result the charge transport. Therefore, this work has focused on obtaining a fundamental understanding of the morphology and molecular packing of OSCs for optimal device performance. Through our work, we have gained a better understanding of how these structural conditions were influenced by the solution processing conditions. Our studies have led to a more systematic understanding of the various parameters that impact OSC morphology. Solution processing leads to non-equilibrium films, thus allowing for the formation of diverse morphologies that are inaccessible by other fabrication methods. Previously, our group has focused on tuning the morphology of small-molecular OSCs [53, 55-57]. However, little work had been devoted to polymer OSCs. There was a lack of detailed studies characterizing the solution-state of polymer OSCs in terms of their conformation, degree of entanglement, polymer aggregation, and chain relaxation dynamics. The solution state properties are also likely to be influenced by the rigidity and molecular weight of the polymer OSCs investigated. Thus, we have focused our attention on gaining a better insight of polymer OSC films and solution processing methods. Through this proposal, our approach is to investigate the correlation between solution-state properties and the morphology of the resulting polymer OSC films. We worked three specific aims: investigate the effects of 1) polymer OSC solution-state properties on final film morphology; 2) molecular additives on the solution-state and final film properties; 3) controlled pre-aggregation in the solution-state in the final film morphology. More rigid and planar polymer backbones should promote interchain charge transport and more efficient interchain hopping between polymer chains. Through tailoring the polymer backbone, polymer sidechains, and molecular weight, we expected the altered solution-state properties to affect the final film morphology. In addition, reducing the entanglements and promoting chain alignment will likely prevent charge carrier trapping through conformation disorders. We thus studied different mechanisms, such as molecular additives, to reduce entanglements in solution. Devices fabricated from these solutions were expected to have improved charge transport abilities. In addition to tailoring the solution-state characteristics of the polymer OSCs, we investigated the effect of solution processing methods on the molecular packing and morphology of polymer OSC films. Two main solution processing techniques, e.g., spin-coating and solution shearing, were employed to fabricate OFETs. Spin coating was employed to prepare OSC films, which produce isotropic films. This technique creates several parameters to tune such as spin coating speed, acceleration, and time. Additionally, our research group developed the solution shearing method, which consists of the solution initially sandwiched between two plates. By sliding the top plate, the solution front is exposed and drying begins. This technique allows for the creation of aligned large crystalline domains. Solution shearing consists of different processing parameters which can affect the final morphology, such as shearing speed, substrate temperature and temperature gradient, distance between both plates, and the tilt angle of the top plate. Due to the complexity of the polymer systems investigated, numerous techniques were employed to characterize the polymer OSC solution state and films. All the materials were characterized using the DOE supported synchrotron X-ray scattering facilities at the Stanford Synchrotron Radiation Lightsource (SSRL). Using grazing incidence X-ray scattering (GIXS) and Near Edge X-ray Absorption Fine Structure (NEXAFS) techniques, the crystalline structure and molecular orientations of the thin films were measured. Optical absorption (UV-Vis) spectroscopy was employed to determine the aggregation state in solution and films of the polymer systems. Polarized UV-Vis also allowed for the determination of the relative degree of polymer chain alignment for solution sheared films. Additionally, various other techniques were used to investigate other properties within the film, such as atomic force microscopy (AFM) and solution rheology. Finally, the device performance is quantified through the fabrication and characterization of OFETs, which will highlight the effects of morphology on charge transport.

36 MATERIALS SCIENCE↗

A water-processable organic electron-selective layer for solution-processed inverted organic solar cells

A triazine- and pyridinium-containing water-soluble material of 1,1′,1″-(4,4′,4″-(1,3,5-triazine-2,4,6-triyl)tris(benzene-4,1-diyl)) tris(methylene)tripyridinium bromide (TzPyBr) was developed as an organic electron-selective layer in solution-processed inverted organic solar cells due to its strong anti-erosion capacity against non-polar organic solvents commonly used for the active layer. Ohmic-like contact with the adjacent active materials like fullerene derivatives is speculated to be formed, as confirmed by the work-function measurements with scanning Kelvin probe and ultraviolet photoelectron spectroscopy techniques. Besides, considering the deep highest occupied molecular orbital energy level of TzPyBr, excellent hole-blocking property of the electron-selective layer is also anticipated. The inverted organic photovoltaic devices based on the TzPyBr/ITO (indium tin oxide) bilayer cathode exhibit dramatically enhanced performance compared to the control devices with bare ITO as the cathode and even higher efficiency than the conventional type devices with ITO and Al as the electrodes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Solution‐Processed Spin‐Polarized Light‐Emitting Diodes of Colloidal Quantum Wells and Magnetic Nanoparticles

Electrical injection of spin-polarized carriers into semiconductors enables circularly-polarized emission from spin-polarized light-emitting diodes (spin-LEDs). The incredible level of tunability of magnetic and electronic properties in colloidal nanocrystals offers unprecedented opportunities for the modulation of polarization of light in solution-processed spin-LEDs based on magnetic nanoparticles unlike epitaxially grown spin-LEDs restricted by a very limited range of materials for their exploitation, and solution-processed spin-LEDs based on chiral molecules, which do not allow the modulation of polarization in general. Here, it is shown that electrical injection of spin-polarized electrons from magnetic Fe 3 O 4 nanoparticles into CdSe/CdZnS core/shell colloidal quantum wells (CQWs) in solution-processed LEDs that allows for polarization modulation of electroluminescence. In this structure, a monolayer of face-down oriented CQWs is deposited as an active layer to avoid polarization losses due to the hopping of the electrons between the CQWs before the radiative recombination process. In this solution-processed spin-LED, the circular polarization reaches 4.5% at 3 K and survives up to 100 K. A net circular polarization is observed at zero magnetic field up to 100 K because of the remnant magnetization of the Fe 3 O 4 nanoparticles. This new colloidal spin-LED architecture presents significant prospects for future solution-processed advanced opto-spintronic devices.

circularly polarized electroluminescence↗

Characterization of novel BaZnSnO thin films by solution process and applications in thin film transistors

Graphical abstract: This work reports the Ba content on thin film transistor based on a novel BaZnSnO semiconductor using solution process. - Highlights: • No reports about BaZnSnO thin film using solution process. • BaZnSnO thin film transistor (TFT) was firstly fabricated. • BaZnSnO-TFT shows a acceptable performace. • Influence of Ba content on BaZnSnO-TFT. - Abstract: A novel BaZnSnO semiconductor is fabricated using solution process and the influence of Ba addition on the structure, the chemical state of oxygen and electrical performance of BaZnSnO thin films are investigated. A high performance BaZnSnO-based thin film transistor with 15 mol% Ba is obtained, showing a saturation mobility of 1.94 cm{sup 2}/V s, a threshold voltage of 3.6 V, an on/off current ratio of 6.2 × 10{sup 6}, a subthreshold swing of 0.94 V/decade, and a good bias stability. Transistors with solution processed BaZnSnO films are promising candidates for the development of future large-area, low-cost and high-performance electronic devices.

36 MATERIALS SCIENCE↗

Role of oxygen vacancies on the bias illumination stress stability of solution-processed zinc tin oxide thin film transistors

Solution-processed ultra-thin (∼3 nm) zinc tin oxide (ZTO) thin film transistors (TFTs) with a mobility of 8 cm{sup 2}/Vs are obtained with post spin-coating annealing at only 350 °C. The effect of light illumination (at wavelengths of 405 nm or 532 nm) on the stability of TFT transfer characteristics under various gate bias stress conditions (zero, positive, and negative) is investigated. It is found that the ΔV{sub th} (V{sub th}{sup stress} {sup 3400} {sup s − stress} {sup 0} {sup s}) window is significantly positive when ZTO TFTs are under positive bias stress (PBS, ΔV{sub th} = 9.98 V) and positive bias illumination stress (λ = 405 nm and ΔV{sub th} = 6.96 V), but ΔV{sub th} is slightly negative under only light illumination stress (λ = 405 nm and ΔV{sub th} = −2.02 V) or negative bias stress (ΔV{sub th} = −2.27 V). However, the ΔV{sub th} of ZTO TFT under negative bias illumination stress is substantial, and it will efficiently recover the ΔV{sub th} caused by PBS. The result is attributed to the photo-ionization and subsequent transition of electronic states of oxygen vacancies (i.e., V{sub o}, V{sub o}{sup +}, and V{sub o}{sup ++}) in ZTO. A detailed mechanism is discussed to better understand the bias stress stability of solution processed ZTO TFTs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Solution‐Processed CsPbBr 3 Quantum Dots/Organic Semiconductor Planar Heterojunctions for High‐Performance Photodetectors

Abstract Planar heterojunctions (PHJs) are fundamental building blocks for construction of semiconductor devices. However, fabricating PHJs with solution‐processable semiconductors such as organic semiconductors (OSCs) is a challenge. Herein, utilizing the orthogonal solubility and good wettability between CsPbBr 3 perovskite quantum dots (PQDs) and OSCs, fabrication of solution‐processed PQD/OSC PHJs are reported. The phototransistors based on bilayer PQD/PDVT‐10 PHJs show responsivity up to 1.64 × 10 4 A W −1 , specific detectivity of 3.17 × 10 12 Jones, and photosensitivity of 5.33 × 10 6 when illuminated by 450 nm light. Such high photodetection performance is attributed to efficient charge dissociation and transport, as well as the photogating effect in the PHJs. Furthermore, the tri‐layer PDVT‐10/PQD/Y6 PHJs are used to construct photodiodes working in self‐powered mode, which exhibit broad range photoresponse from ultraviolet to near‐infrared, with responsivity approaching 10 −1 A W −1 and detectivity over 10 6 Jones. These results present a convenient and scalable production processes for solution‐processed PHJs and show their great potential for optoelectronic applications.

36 MATERIALS SCIENCE↗

Blending Ionic and Coordinate Bonds in Hybrid Semiconductor Materials: A General Approach toward Robust and Solution-Processable Covalent/Coordinate Network Structures

Inorganic semiconductor materials are best known for their superior physical properties, as well as their structural rigidity and stability. However, the poor solubility and solution-processability of these covalently bonded network structures has long been a serious drawback that limits their use in many important applications. Here, we present a unique and general approach to synthesize robust, solution-processable, and highly luminescent hybrid materials built on periodic and infinite inorganic modules. Structure analysis confirms that all compounds are composed of one-dimensional anionic chains of copper iodide (Cu m I m+2 2- ) coordinated to cationic organic ligands via Cu-N bonds. The choice of ligands plays an important role in the coordination mode (μ 1 -MC or μ 2 -DC) and Cu-N bond strength. Greatly suppressed nonradiative decay is achieved for the μ 2 -DC structures. Record high quantum yields of 85% (λ ex = 360 nm) and 76% (λ ex = 450 nm) are obtained for an orange-emitting 1D-Cu 4 I 6 (L 6 ). Temperature dependent PL measurements suggest that both phosphorescence and thermally activated delayed fluorescence contribute to the emission of these 1D-AIO compounds, and that the extent of nonradiative decay of the μ 2 -DC structures is much less than that of the μ1 -DC structures. More significantly, all compounds are remarkably soluble in polar aprotic solvents, distinctly different from previously reported CuI based hybrid materials made of charge-neutral Cu m X m (X = Cl, Br, I), which are totally insoluble in all common solvents. Finally, the greatly enhanced solubility is a result of incorporation of ionic bonds into extended covalent/coordinate network structures, making it possible to fabricate large scale thin films by solution processes

36 MATERIALS SCIENCE↗

Solution processable organic polymers and small molecules for bulk-heterojunction solar cells: A review

Solution processed bulk heterojunction (BHJ) organic solar cells (OSCs) have gained wide interest in past few years and are established as one of the leading next generation photovoltaic technologies for low cost power production. Power conversion efficiencies up to 6% and 6.5% have been reported in the literature for single layer and tandem solar cells, respectively using conjugated polymers. A recent record efficiency about 8.13% with active area of 1.13 cm{sup 2} has been reported. However Solution processable small molecules have been widely applied for photovoltaic (PV) devices in recent years because they show strong absorption properties, and they can be easily purified and deposited onto flexible substrates at low cost. Introducing different donor and acceptor groups to construct donor--acceptor (D--A) structure small molecules has proved to be an efficient way to improve the properties of organic solar cells (OSCs). The power conversion efficiency about 4.4 % has been reported for OSCs based on the small molecules. This review deals with the recent progress of solution processable D--A structure small molecules and discusses the key factors affecting the properties of OSCs based on D--A structure small molecules: sunlight absorption, charge transport and the energy level of the molecules.

14 SOLAR ENERGY↗

High mobility solution-processed hybrid light emitting transistors

We report the design, fabrication, and characterization of high-performance, solution-processed hybrid (inorganic-organic) light emitting transistors (HLETs). The devices employ a high-mobility, solution-processed cadmium sulfide layer as the switching and transport layer, with a conjugated polymer Super Yellow as an emissive material in non-planar source/drain transistor geometry. We demonstrate HLETs with electron mobilities of up to 19.5 cm{sup 2}/V s, current on/off ratios of >10{sup 7}, and external quantum efficiency of 10{sup −2}% at 2100 cd/m{sup 2}. These combined optical and electrical performance exceed those reported to date for HLETs. Furthermore, we provide full analysis of charge injection, charge transport, and recombination mechanism of the HLETs. The high brightness coupled with a high on/off ratio and low-cost solution processing makes this type of hybrid device attractive from a manufacturing perspective.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Vertical Architecture Solution-Processed Quantum Dot Photodetectors with Amorphous Selenium Hole Transport Layer

Colloidal quantum dots (CQDs) provide wide spectral tunability and high absorption coefficients owing to quantum confinement and large oscillator strengths, which along with solution processability, allow a facile, low-cost, and room-temperature deposition technique for the fabrication of photonic devices. However, many solution-processed CQD photodetector devices demonstrate low specific-detectivity and slow temporal response. To achieve improved photodetector characteristics, limiting carrier recombination and enhancing photogenerated carrier separation are crucial. In this study, we develop and present an alternate vertical-stack photodetector wherein we use a solution-processed quantum dot photoconversion layer coupled to an amorphous selenium (a-Se) wide-bandgap charge transport layer that is capable of exhibiting single-carrier hole impact ionization and is compatible with active-matrix readout circuitry. This a-Se chalcogenide transport layer enables the fabrication of high-performance and reliable solution-processed quantum dot photodetectors, with enhanced charge extraction capabilities, high specific detectivity (D* ~ 0.5–5 × 10 12 Jones), fast 3 dB electrical bandwidth (3 dB BW ~ 22 MHz), low dark current density (J D ~ 5–10 pA/cm 2 ), low noise current (i n ~ 20–25 fW/Hz 1/2 ), and high linear dynamic range (LDR ~130–150 dB) across the measured visible electromagnetic spectrum (~405–656 nm).

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Luminescence and electrical properties of solution-processed ZnO thin films by adding fluorides and annealing atmosphere

Highlights: {yields} Systematic study of the fluorides doped solution-processed ZnO thin films via the luminescence and electrical behaviors. {yields} Defect-related visible emission bands are affected by annealing ambient and fluoride addition. {yields} Adding lithium fluoride followed by annealing in oxygen ambient leads to a controlled defect density with proper TFT performance. -- Abstract: To develop an efficient channel layer for thin film transistors (TFTs), understanding the defect-related luminescence and electrical property is crucial for solution-processed ZnO thin films. Film growth with the fluorides addition, especially using LiF, followed by the oxygen ambient post-annealing leads to decreased defect-related emission as well as enhanced switching property. The saturation mobility and current on/off ratio are 0.31 cm{sup 2} V{sup -1} s{sup -1} and 1.04 x 10{sup 3}. Consequently, we can visualize an optimized process condition and characterization method for solution-processed TFT based on the fluorine-doped ZnO film channel layer by considering the overall emission behavior.

36 MATERIALS SCIENCE↗

Solvent Additives: Key Morphology-Directing Agents for Solution-Processed Organic Solar Cells

By affecting film formation during the solution processing, solvent additives can provide fine control of the active layer morphology of organic photovoltaics. As such, solvent additives form a versatile method of experimental control for enhancing organic solar cell device performance. In this review, we provide a brief history of bulk heterojunction organic photovoltaics (OPV) processed from solution and the advent of solvent additives, putting them into context with other morphology directing agents. We present our current understanding of how solvent additives impact various mechanisms of phase separation, enabled by recent advances in morphology characterization by in situ X-ray scattering, absorbance and reflectometry. Indeed, understanding solvent additives’ effects on film formation has allowed them to be applied and combined effectively and synergistically to boost OPV performance. Their success as a morphology control strategy has also prompted the use of solvent additives in related organic semiconductor technologies. Finally, we discuss the role of solvent additives in the development of next-generation OPV active layers. In conclusion, despite concerns over their environmental toxicity and role in photo-instability, solvent additives will likely remain relevant morphological directing agents as research interests evolve toward non-fullerene acceptors, ternary blends and environmentally sustainable solvents.

36 MATERIALS SCIENCE↗

3D Printing of Solution‐Processable 2D Nanoplates and 1D Nanorods for Flexible Thermoelectrics with Ultrahigh Power Factor at Low‐Medium Temperatures

Abstract Solution‐processable semiconducting 2D nanoplates and 1D nanorods are attractive building blocks for diverse technologies, including thermoelectrics, optoelectronics, and electronics. However, transforming colloidal nanoparticles into high‐performance and flexible devices remains a challenge. For example, flexible films prepared by solution‐processed semiconducting nanocrystals are typically plagued by poor thermoelectric and electrical transport properties. Here, a highly scalable 3D conformal additive printing approach to directly convert solution‐processed 2D nanoplates and 1D nanorods into high‐performing flexible devices is reported. The flexible films printed using Sb 2 Te 3 nanoplates and subsequently sintered at 400 °C demonstrate exceptional thermoelectric power factor of 1.5 mW m −1 K −2 over a wide temperature range (350–550 K). By synergistically combining Sb 2 Te 3 2D nanoplates with Te 1D nanorods, the power factor of the flexible film reaches an unprecedented maximum value of 2.2 mW m −1 K −2 at 500 K, which is significantly higher than the best reported values for p‐type flexible thermoelectric films. A fully printed flexible generator device exhibits a competitive electrical power density of 7.65 mW cm −2 with a reasonably small temperature difference of 60 K. The versatile printing method for directly transforming nanoscale building blocks into functional devices paves the way for developing not only flexible energy harvesters but also a broad range of flexible/wearable electronics and sensors.

36 MATERIALS SCIENCE↗

Solution processed metal oxide thin film hole transport layers for high performance organic solar cells

A method for the application of solution processed metal oxide hole transport layers in organic photovoltaic devices and related organic electronics devices is disclosed. The metal oxide may be derived from a metal-organic precursor enabling solution processing of an amorphous, p-type metal oxide. An organic photovoltaic device having solution processed, metal oxide, thin-film hole transport layer.

14 SOLAR ENERGY↗