SEARCH · Engineering Papers
Results for “solid solution”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Preparation, structural, dielectric and magnetic properties of LaFeO{sub 3}–PbTiO{sub 3} solid solutions
Highlights: ► Solid-solutions of (1−x)LaFeO{sub 3}–(x)PbTiO{sub 3} were synthesized by solid-state reaction. ► XRPD and NPD evidence orthorhombic (x < 0.7) and tetragonal (x > 0.8) crystal structures. ► LaFeO{sub 3}-rich compositions order antiferromagnetically (x < 0.6, G-type structure). ► PbTiO{sub 3}-rich compositions exhibit ferroelectric order (x larger than 0.8). ► Magnetic and dielectric (relaxor) ordering coexist near room-temperature around x = 0.4. -- Abstract: Solid solutions of (1−x)LaFeO{sub 3}–(x)PbTiO{sub 3} (0 < x < 1) have been prepared by conventional solid-state reaction. These complex perovskites have been studied by means of X-ray (XRPD) and neutron powder (NPD) diffraction, complemented with dielectric, magnetic, heat capacity and Mössbauer measurements. Complete solubility in the perovskite series was demonstrated. The NPD and XRPD patterns were successfully refined as orthorhombic (x ≤ 0.7) and tetragonal (x ≥ 0.8). A composition-driven phase transformation occurs within the interval 0.7 < x < 0.8. The samples with x < 0.5 showed evidence of long-range magnetic ordering with an G-type antiferromagnetic arrangement of the magnetic moments of the Fe{sup 3+} cations in the B-site with propagation vector k = (0,0,0). Based on the obtained experimental data, a combined structural and magnetic phase diagram has been constructed. The factors governing the structural, dielectric and magnetic properties of (1−x)LaFeO{sub 3}–(x)PbTiO{sub 3} solid solutions are discussed, as well as their possible multiferroicity.
Quantum Critical Behavior in a Concentrated Ternary Solid Solution
The face centered cubic (fcc) alloy NiCoCr x with x ≈ 1 is found to be close to the Cr concentration where the ferromagnetic transition temperature, T c , goes to 0. Near this composition these alloys exhibit a resistivity linear in temperature to 2 K, a linear magnetoresistance, an excess –TlnT (or power law) contribution to the low temperature heat capacity and excess low temperature entropy. All of the low temperature electrical, magnetic and thermodynamic properties of the alloys with compositions near x ≈ 1 are not typical of a Fermi liquid and suggest strong magnetic fluctuations associated with a quantum critical region. The limit of extreme chemical disorder in this simple fcc material thus provides a novel and unique platform to study quantum critical behavior in a highly tunable system.
High-Temperature Thermoelectric Properties of the Solid-Solution Zintl Phase Eu 11 Cd 6 Sb 12-x As x (x < 3)
Zintl phases are compounds that have shown promise for thermoelectric applications. The title solid–solution Zintl compounds were prepared from the elements as single crystals using a tin flux for compositions x = 0, 1, 2, and 3. Eu 11 Cd 6 Sb 12–x As x (x < 3) crystallize isostructurally in the centrosymmetric monoclinic space group C2/m (no. 12, Z = 2) as the Sr 11 Cd 6 Sb 12 structure type (Pearson symbol mC58). Efforts to make the As compositions for x exceeding ~3 resulted in structures other than the Sr 11 Cd 6 Sb 12 structure type. Single-crystal X-ray diffraction indicates that As does not randomly substitute for Sb in the structure but is site specific for each composition. The amount of As determined by structural refinement was verified by electron microprobe analysis. Electronic structures and energies calculated for various model structures of Eu 11 Cd 6 Sb 10 As 2 (x = 2) indicated that the preferred As substitution pattern involves a mixture of three of the six pnicogen sites in the asymmetric unit. In addition, As substitution at the Pn4 site opens an energy gap at the Fermi level, whereas substitution at the other five pnicogen sites remains semimetallic with a pseudo gap. Thermoelectric properties of these compounds were measured on hot-pressed, fully densified pellets. Samples show exceptionally low lattice thermal conductivities from room temperature to 775 K: 0.78–0.49 W/mK for x = 0; 0.72–0.53 W/mK for x = 1; and 0.70–0.56 W/mK for x = 2. Eu 11 Cd 6 Sb 12 shows a high p-type Seebeck coefficient (from +118 to 153 μ V/K) but also high electrical resistivity (6.8 to 12.8 mΩ·cm). The value of zT reaches 0.23 at 774 K. The properties of Eu 11 Cd 6 Sb 12–x As x are interpreted in discussion with the As site substitution.
Softening of antiferroelectricity in PbZrO{sub 3}-Pb(Mn{sub 1/2}W{sub 1/2})O{sub 3} complex perovskite solid solution
A new solid solution of complex perovksite structure, (1-x)PbZrO{sub 3}-xPb(Mn{sub 1/2}W{sub 1/2})O{sub 3} (PZ-xPMnW, with x = 0–0.1), is prepared by solid state reaction method. Its crystal structure, dielectric properties, and antiferroelectricity are investigated. It is found that the crystal structure of the solid solution remains in the orthorhombic Pbam symmetry with x ≤ 0.1. The induced ferroelectric polarization (P{sub Ind}) is enhanced, whereas the critical field (E{sub Cr}) is decreased, with increasing PMnW concentration, indicating the softening of antiferroelectricity in PZ. The Curie temperature (T{sub C}) is also decreased with the substitution of PMnW for PZ. The grain size is significantly enlarged, which could be attributed to the presence of a transient liquid phase during the sintering process. Measurements of the magnetization by means of SQUID confirm that the Mn ion exists in a high spin state with a 2+ oxidation state. The softening of antiferroelectric order and the improvement in induced polarization make the PZ-PMnW ceramics an interesting material system for such applications as energy storage devices.
Disorder in Ho 2 Ti 2-x Zr x O 7 : pyrochlore to defect fluorite solid solution series
Explore the source record for details and available documents.
Magnetic and structural properties of the solid solution CuAl 2(1–x) Ga 2x O 4
CuAl 2 O 4 is a ternary oxide spinel with Cu 2+ ions (s = 1/2) primarily populating the A-site diamond sublattice. The compound is reported to display evidence of spin glass behavior but possess a non-frozen magnetic ground state below the transition temperature. On the other hand, the spinel CuGa 2 O 4 displays spin glass behavior at ~ 2.5 K with Cu 2+ ions more readily tending to the B-site pyrochlore sublattice. Therefore, we investigate the magnetic and structural properties of the solid solution CuAl 2(1-x) Ga 2x O 4 examining the evolution of the magnetic behavior as Al 3+ is replaced with a much larger Ga 3+ ion. Our results show that the Cu 2+ ions tend to migrate from tetrahedral to octahedral sites as the Ga 3+ ion concentration increases, resulting in a concomitant change in the glassy magnetic properties of the solution. Results indicate glassy behavior for much of the solution with a general trend towards decreasing magnetic frustration as the Cu 2+ ion shifts to the B-site. However, the x = 0.1 and 0.2 members of the system do not show glassy behavior down to our measurement limit (1.9 K) suggesting a delayed spin glass transition. We suggest that these two members are additional candidates for investigation to access highly frustrated exotic quantum states.
Effect of Composition and Local Environment on CO 2 Adsorption on Nickel and Magnesium Oxide Solid Solutions
CO 2 adsorption energies on the (100) surfaces of a nickel oxide doped with Mg, magnesium oxide doped with Ni, and their 50:50 solid solution were calculated using density functional theory. The composition and atomic arrangement of the adsorption site was varied to understand how the local environment affects CO 2 adsorption and the basicity of the surfaces at the atomic level. The dispersive and electronic contributions to the adsorption energies were quantified, and the results indicate that the variation of the adsorption energy with adsorption site configuration and metal composition is dominated by electronic interactions. Interestingly, for magnesium oxide doped with nickel, a single substitution can create stronger CO 2 binding sites, which implies stronger basic sites, even though nickel oxide is less basic than magnesium oxide. The effect of double substitution at the binding site can be reasonably approximated by summing the effects of single substitutions. Furthermore, this work provides guidance for the preparation of metal oxides with tailored Lewis basicity.
A green-yellow emitting oxyfluoride solid solution phosphor Sr[subscript 2]Ba(AlO[subscript 4]F)[subscript 1;#8722;x](SiO[subscript 5])x:Ce[superscript 3+] for thermally stable, high color rendition solid state white lighting
A near-UV excited, oxyfluoride phosphor solid solution Sr{sub 1.975}Ce{sub 0.025}Ba(AlO{sub 4}F){sub 1-x}(SiO{sub 5}){sub x} has been developed for solid state white lighting applications. An examination of the host lattice, and the local structure around the Ce{sup 3+} activator ions through a combination of density functional theory, synchrotron X-ray and neutron powder diffraction and total scattering, and electron paramagnetic resonance, points to how chemical substitutions play a crucial role in tuning the optical properties of the phosphor. The maximum emission wavelength can be tuned from green ({lambda}{sub em} = 523 nm) to yellow ({lambda}{sub em} = 552 nm) by tuning the composition, x. Photoluminescent quantum yield is determined to be 70 {+-} 5% for some of the examples in the series. Excellent thermal properties were found for the x = 0.5 sample, with the photoluminescence intensity at 160 C only decreased to 82% of its room temperature value. Phosphor-converted LED devices fabricated using an InGaN LED ({lambda}{sub max} = 400 nm) exhibit high color rendering white light with R{sub a} = 70 and a correlated color temperature near 7000 K. The value of R{sub a} could be raised to 90 by the addition of a red component, and the correlated color temperature lowered to near 4000 K.
Exploring stress equivalence for solid solution strengthened Mg alloy polycrystals
Not provided.
Extended Solid Solutions and Coherent Transformations in Nanoscale Olivine Cathodes
Explore the source record for details and available documents.
Defect energetics of concentrated solid-solution alloys from ab initio calculations: Ni 0.5 Co 0.5 , Ni 0.5 Fe 0.5 , Ni 0.8 Fe 0.2 and Ni 0.8 Cr 0.2
It has been shown that concentrated solid solution alloys possess unusual electronic, magnetic, transport, mechanical and radiation-resistant properties that are directly related to underlying chemical complexity. Because every atom experiences a different local atomic environment, the formation and migration energies of vacancies and interstitials in these alloys exhibit a distribution, rather than a single value as in a pure metal or dilute alloy. In this study, using ab initio calculations based on density functional theory and special quasirandom structure, we have characterized the distribution of defect formation energy and migration barrier in four Ni-based solid-solution alloys: Ni 0.5 Co 0.5 , Ni 0.5 Fe 0.5 , Ni 0.8 Fe 0.2 and Ni 0.8 Cr 0.2 . As defect formation energies in finite-size models depend sensitively on the elemental chemical potential, we have developed a computationally efficient method for determining it which takes into account the global composition and the local short-range order. In addition we have compared the results of our ab initio calculations to those obtained from available embedded atom method (EAM) potentials. Our results indicate that the defect formation and migration energies are closely related to the specific atomic size in the structure, which further determines the elemental diffusion properties. In conclusion, different EAM potentials yield different features of defect energetics in concentrated alloys, pointing to the need for additional potential development efforts in order to allow spatial and temporal scale-up of defect and simulations, beyond those accessible to ab initio methods.
Absence of Nanostructuring in NaPb m SbTe m+2 : Solid Solutions with High Thermoelectric Performance in the Intermediate Temperature Regime
Thermoelectric devices directly convert heat into electrical energy and are highly desired for emerging applications in waste heat recovery. Currently, PbTe based compounds are the leading thermoelectric materials in the intermediate temperature regime (~800 K); however, integration into commercial devices has been limited. This is largely because the performance of PbTe, which is maximized ~900 K, is too low over the temperatures of interest for most potential commercial applications (generally under 600 K). Improving the low temperature performance of PbTe based materials is therefore critical to achieve usage outside of existing niche applications. Here, we provide an in-depth study of the cubic NaPb m SbTe m+2 system of compounds (m = 1-20) and report that it is an excellent class of low- to medium-temperature thermoelectrics when m = 10-20. Here, we show that the as-cast polycrystalline ingots exhibit degenerate p-type conduction and high maximum ZTs of 1.2-1.4 at 650 K when m = 6-20. Because the ingots are found to be extremely brittle, we utilize spark plasma sintering (SPS) to prepare more mechanically robust samples, and surprisingly, find that SPS results in an undesired change in charge transport toward n-type behavior. We show this unanticipated transition from p-type behavior as ingots to n-type after SPS is due to dissolution of secondary phases that are present in the ingots into the primary matrix during the SPS process, resulting in a transformation from an inhomogeneous state to a solid solution without any observable evidence of nanoscale precipitation. This is in sharp contrast to the seemingly similar AgPb m SbTe m+2 (LAST) system, which is heavily nanostructured. The SPSed NaPb m SbTe m+2 is doped p-type by tuning the cation stoichiometry, i.e., Na 1+x Pb m-x Sb 1-y Te m+2 . The optimized compounds have very low lattice thermal conductivities of 1.1-0.55 W·m -1 ·K -1 over 300-650 K, which enhances the low intermediate temperature performance and gives rise to maximum ZT values up to 1.6 at 673 K as well as an excellent ZT avg of 1.1 over 323-673 K for m = 10, 20, making Na 1+x Pb m-x Sb 1-y Te m+2 among the highest performing PbTe-based thermoelectrics under 650 K.
Ultra-strong nanotwinned Al–Ni solid solution alloys with significant plasticity
Twin boundaries have been proven effective for strengthening metallic materials while maintaining plasticity.