Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solar opacity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Multi-stage falling particle receivers

The present disclosure is directed to multi-stage falling particle receivers and methods of falling particle heating. As the particles fall through the receiver, the particles are periodically collected and released by flow retarding devices. The periodic catch-and-release of the particles falling through the receiver reduces particle flow dispersion, increases particle opacity and solar absorption, and reduces erosion and damage to surfaces caused by direct particle impingement.

Ho, Clifford K.↗
NASA NTRS1972

The effects of recent opacity corrections on a main-sequence stellar model of 2.25 solar masses.

Comparison of models calculated with the opacities of Carson et al. (1968) and the electron-scattering corrections of Watson with models based on the opacities of Cox et al. (1965). The models have a mass of 2.25 solar masses and a chemical composition with X = 0.596 and Z = 0.02. With the adopted formulas representing the new opacities, it is found that the percentage changes with respect to the model based on the opacities of Cox et al. can be as large as +11 for the stellar radius, -42 for the luminosity, -15 for the effective temperature, -30 for the mass of the convective core, -8 for the central pressure, and -4 for both the central density and the central temperature.

Novotny, E.↗
NASA NTRS2019

Modeling Mg II During Solar Flares. I. Partial Frequency Redistribution, Opacity, and Coronal Irradiation

The Interface Region Imaging Spectrograph has routinely observed the flaring Mg II near-ultraviolet (NUV) spectrum, offering excellent diagnostic potential and a window into the location of energy deposition. A number of studies have forward-modeled both the general properties of these lines and specific flare observations. Generally these have forward-modeled radiation via post-processing of snapshots from hydrodynamic flare simulations through radiation transfer codes. There has, however, not been a study of how the physics included in these radiation transport codes affects the solution. A baseline setup for forward-modeling Mg II in flares is presented and contrasted with approaches that add or remove complexity. It is shown for Mg II that (1) partial frequency distribution (PRD) is still required during flare simulations despite the increased densities; (2) using full angle-dependent PRD affects the solution but takes significantly longer to process a snapshot; (3) including Mg I in non-LTE (NLTE) results in negligible differences to the Mg II lines but does affect the NUV quasi-continuum; (4) only hydrogen and Mg II need to be included in NLTE; (5) ideally the nonequilibrium hydrogen populations, with nonthermal collisional rates, should be used rather than the statistical equilibrium populations; (6) an atom consisting of only the ground state, h and k upper levels, and continuum level is insufficient to model the resonance lines; and (7) irradiation from a hot, dense flaring transition region can affect the formation of Mg II. We discuss modifications to the RH code allowing straightforward inclusion of the transition region and coronal irradiation in flares.

Kerr, Graham S.↗
NASA NTRS1977

Does the upper main sequence extend across the whole H-R diagram

The effect of using Carson's (1976) radiative opacities in evolutionary sequences of stellar models has been studied over the mass range from 7 to 60 solar masses. The opacities are very large in the outer part of the envelope and induce such enormous radii for masses greater than about 30 solar masses for a heavy-element fraction of 0.02 or about 20 solar masses for a heavy-element fraction of 0.04 that the evolutionary tracks during the phase of core hydrogen burning extend across the whole H-R diagram. The choice of the Schwarschild or Ledoux criterion for convection makes very little difference for the behavior of the tracks. Evolution through the effective-temperature range (in logarithms) of 3.6 to 4.0 occurs in all cases on a rapid (secular) time scale. Core helium burning takes place exclusively in the red-supergiant configuration for stellar masses exceeding 8 solar masses (heavy-element fraction of 0.02) or 6 solar masses (heavy-element fraction of 0.04). These stellar models seem to be in significantly better agreement with the observed distribution of bright stars on the H-R diagram than are the older models based on the Cox-Stewart opacities. It can be inferred that a large envelope opacity (e.g., Carson's) exists and that substantial mass loss takes place in very massive late-type supergiants.

Stothers, R.↗
NASA NTRS1987

Exploiting the IR: Solar and stellar spectroscopy in the IR

Recent instrumental advances have provided the capability to perform high resolution spectroscopy, in the thermal infrared region of the solar spectrum, with high sensitivity. The 8 to 12 micron region was extensively observed using Fourier transform (FTS) and laser heterodyne techniques. The continuous opacity of the solar atmosphere, due to H(-), increases with wavelength in the infrared region longward of 1.6 microns. Consequently thermal infrared observations probe the upper photosphere, and give an insight into the dynamics and structure of this region. The most notable spectral features in the 10 micron window include pure rotation lines of OH, and emission lines due to high-n states in MgI and AlI. The high-n lines due to MgI and AlI are important to solar and stellar physics because of their very large Zeeman sensitivity. The recent development of a cryogenic grating postdispenser for the FTS has allowed low-noise solar observations of these lines in 90 seconds. Limited mapping of the lines in a sunspot penumbra was performed, and gives information of the structure of the penumbral magnetic field. Although the MgI lines were detected in red giant spectra, instrumental sensitivity is not yet sufficient to see them in stars where significant magnetic fields are expected.

Deming, Drake↗
NASA NTRS1974

Influence of rotation on the maximum mass of pulsationally stable stars

The critical mass for stability against radial pulsations in rotating, homogeneous main-sequence stars is found to be greater than in the case of no rotation. Analytic and detailed numerical models show that the critical mass rises steeply with increasing concentration of angular momentum to the center of the star. For uniform rotation near breakup velocity at the star's equator the critical mass is about 850 solar masses if an electron-scattering opacity is used, or about 5000 solar masses if the opacities of Cox and Stewart are used. For nonuniform rotation with a constant ratio of centrifugal force to gravity in the star, the critical mass becomes 'infinite' long before breakup velocity is attained. The relevance of the present results to several observational problems is noted.

Stothers, R.↗
DOE OSTI2024

In-depth analysis of solar models with high-metallicity abundances and updated opacity tables

Context. As a result of the high-quality constraints available for the Sun, we are able to carry out detailed combined analyses using neutrino, spectroscopic, and helioseismic observations. These studies lay the ground for future improvements of the key physical components of solar and stellar models because ingredients such as the equation of state, the radiative opacities, or the prescriptions for macroscopic transport processes of chemicals are then used to study other stars in the Universe. Aims. We study the existing degeneracies in solar models using the recent high-metallicity spectroscopic abundances by comparing them to helioseismic and neutrino data and discuss the effect on their properties of changes in the micro and macro physical ingredients. Methods. We carried out a detailed study of solar models computed with a high-metallicity composition from the literature based on averaged 3D models that were claimed to resolve the solar modelling problem. We compared these models to helioseismic and neutrino constraints. Results. The properties of the solar models are significantly affected by the use of the recent OPLIB opacity tables and the inclusion of macroscopic transport. The properties of the standard solar models computed using the OPAL opacities are similar to those for which the OP opacities were used. We show that a modification of the temperature gradient just below the base of the convective zone is required to remove the discrepancies in solar models, particularly in the presence of macroscopic mixing. This can be simulated by a localised increase in the opacity of a few percent. Conclusions. We conclude that the existing degeneracies and issues in solar modelling are not removed by using an increase in the solar metallicity, in contradiction to what has been suggested in the recent literature. Therefore, standard solar models cannot be used as an argument for a high-metallicity composition. While further work is required to improve solar models, we note that direct helioseismic inversions indicate a low metallicity in the convective envelope, in agreement with spectroscopic analyses based on full 3D models.

74 ATOMIC AND MOLECULAR PHYSICS↗
NASA NTRS1992

Photovoltaic array for Martian surface power

Missions to Mars will require electric power. A leading candidate for providing power is solar power produced by photovoltaic arrays. To design such a power system, detailed information on solar-radiation availability on the Martian surface is necessary. The variation of the solar radiation on the Martian surface is governed by three factors: (1) variation in Mars-Sun distance; (2) variation in solar zenith angle due to Martian season and time of day; and (3) dust in the Martian atmosphere. A major concern is the dust storms, which occur on both local and global scales. However, there is still appreciable diffuse sunlight available even at high opacity, so that solar array operation is still possible. Typical results for tracking solar collectors are also shown and compared to the fixed collectors. During the Northern Hemisphere spring and summer the isolation is relatively high, 2-5 kW-hr/sq m-day, due to the low optical depth of the Martian atmosphere. These seasons, totalling a full terrestrial year, are the likely ones during which manned mission will be carried out.

Appelbaum, J.↗
NASA NTRS1992

Photovoltaic arrays for Martian surface power

Missions to Mars will require electric power. A leading candidate for providing power is solar power produced by photovoltaic arrays. To design such a power system, detailed information on solar-radiation availability on the Martian surface is necessary. The variation of the solar radiation on the Martian surface is governed by three factors: (1) variation in Mars-sun distance; (2) variation on solar zenith angle due to Martian season and time of day; and (3) dust in the Martian atmosphere. A major concern is the dust storms, which occur on both local and global scales. However, there is still appreciable diffuse sunlight available even at high opacity, so that solar array operation is still possible. Typical results for tracking solar collectors are also shown and compared to the fixed collectors. During the Northern Hemisphere spring and summer the isolation is relatively high, 2-5 kW-hr/sq m-day due to the low optical depth of the Martian atmosphere. These seasons, totalling a full terrestrial year, are the likely ones during which manned mission will be carried out.

Appelbaum, Joseph↗
NASA NTRS1982

Increased atmospheric carbon dioxide and climate feedback mechanisms

As a consequence of fossil fuel burning, the atmospheric concentration of carbon dioxide has increased from 314 ppm in 1958, when detailed measurements of this quantity began, to a present value of 335 ppm; and it is estimated that during the next century, the CO2 concentration will double relative to its assumed preindustrial value of 290 ppm. Since CO2 is an infrared-active gas, increases in its atmospheric concentration would lead to a larger infrared opacity for the atmospheric which, by normal logic, would result in a warmer Earth. A number of modeling endeavors suggest a 2 to 4 C increase in global mean surface temperature with doubling of the CO2 concentration. But such estimates of CO2-induced warming are highly uncertain because of a lack of knowledge of climate feedback mechanisms. Interactive influences upon the solar and infrared opacities of the Earth-atmosphere system can either amplify or damp a climate-forcing mechanism such as increasing CO2. Climate feedback mechanisms discussed include climate sensitivity, cloudiness-radiation feedback, climate change predictions, and interactive atmospheric chemistry.

Cess, R. D.↗
NASA NTRS1990

Cassini atmospheric chemistry mapper. Volume 1. Investigation and technical plan

The Cassini Atmospheric Chemistry Mapper (ACM) enables a broad range of atmospheric science investigations for Saturn and Titan by providing high spectral and spatial resolution mapping and occultation capabilities at 3 and 5 microns. ACM can directly address the major atmospheric science objectives for Saturn and for Titan, as defined by the Announcement of Opportunity, with pivotal diagnostic measurements not accessible to any other proposed Cassini instrument. ACM determines mixing ratios for atmospheric molecules from spectral line profiles for an important and extensive volume of the atmosphere of Saturn (and Jupiter). Spatial and vertical profiles of disequilibrium species abundances define Saturn's deep atmosphere, its chemistry, and its vertical transport phenomena. ACM spectral maps provide a unique means to interpret atmospheric conditions in the deep (approximately 1000 bar) atmosphere of Saturn. Deep chemistry and vertical transport is inferred from the vertical and horizontal distribution of a series of disequilibrium species. Solar occultations provide a method to bridge the altitude range in Saturn's (and Titan's) atmosphere that is not accessible to radio science, thermal infrared, and UV spectroscopy with temperature measurements to plus or minus 2K from the analysis of molecular line ratios and to attain an high sensitivity for low-abundance chemical species in the very large column densities that may be achieved during occultations for Saturn. For Titan, ACM solar occultations yield very well resolved (1/6 scale height) vertical mixing ratios column abundances for atmospheric molecular constituents. Occultations also provide for detecting abundant species very high in the upper atmosphere, while at greater depths, detecting the isotopes of C and O, constraining the production mechanisms, and/or sources for the above species. ACM measures the vertical and horizontal distribution of aerosols via their opacity at 3 microns and, particularly, at 5 microns. ACM recovers spatially-resolved atmospheric temperatures in Titan's troposphere via 3- and 5-microns spectral transitions. Together, the mixing ratio profiles and the aerosol distributions are utilized to investigate the photochemistry of the stratosphere and consequent formation processes for aerosols. Finally, ring opacities, observed during solar occultations and in reflected sunlight, provide a measurement of the particle size and distribution of ring material. ACM will be the first high spectral resolution mapping spectrometer on an outer planet mission for atmospheric studies while retaining a high resolution spatial mapping capability. ACM, thus, opens an entirely new range of orbital scientific studies of the origin, physio-chemical evolution and structure of the Saturn and Titan atmospheres. ACM provides high angular resolution spectral maps, viewing nadir and near-limb thermal radiation and reflected sunlight; sounds planetary limbs, spatially resolving vertical profiles to several atmospheric scale heights; and measures solar occultations, mapping both atmospheres and rings. ACM's high spectral and spatial resolution mapping capability is achieved with a simplified Fourier Transform spectrometer with a no-moving parts, physically compact design. ACM's simplicity guarantees an inherent stability essential for reliable performance throughout the lengthy Cassini Orbiter mission.

Smith, William Hayden↗
NASA NTRS1978

The effects of TiO opacity on the atmospheric structure of cool stars

A quantitative investigation is conducted concerning the effect of TiO opacities on the atmospheric temperature structure in late-type stars. Model atmospheres are computed, taking into account opacity-sampling (OS) or straight-mean (SM) opacities for three singlet and three triplet band systems of TiO. Model atmospheres using OS and SM opacities for TiO are compared with models having no TiO, giving attention to the effects of TiO opacities on the temperature structures of various atmospheres and the usefulness of straight-mean TiO opacities in model atmosphere calculations. The results of the model-atmosphere calculations are presented in two graphs. TiO opacities produce a global atmospheric heating which may reach several hundred kelvins. It is shown quantitatively that the TiO molecule is an important source of atmospheric opacity in cool stars of solar composition. The relative importance of TiO opacities to the thermal structure of a stellar atmosphere is influenced in the outer layers by CO and H2O cooling effects and in the deeper layers by CO, CN, and metal line absorption.

Krupp, B. M.↗
NASA NTRS1975

The structure and evolution of Jupiter - The fluid contraction stage

The complete evolution of a contracting star of Jovian mass consisting of a convective adiabatic homogeneous fluid is determined using stellar structure methods, improved model atmosphere calculations, and substantially improved thermodynamic properties for hydrogen and hydrogen-helium fluids. The model atmospheres are calculated in the form of time-averaged vertical temperature structures, including all relevant sources of opacity and a solar energy deposition component, and the thermodynamic properties are modified to obtain better agreement with Monte Carlo results for metallic fluids. The resultant gravitationally contracting evolutionary models are found to have two phases: an early stellar phase similar to a typical low-mass pre-main-sequence body and a later phase constituting an approach to a degenerate-dwarf cooling curve. The first phase is shown to have high luminosities and internal temperatures, while the second gives excellent agreement with the observed radius and luminosity of Jupiter. Analysis indicates that the equation of state and superadiabaticity have the strongest influence on evolution over planetary time scales.

Graboske, H. C., Jr.↗
NASA NTRS1985

X-ray resonance scattering in a spherically symmetric coronal model

In the solar corona the opacities of some of the prominent X-ray emission lines are on the order of tau of about I over typical coronal path lengths. A particular solution of the radiative transfer problem involving an extended, spherically symmetric coronal shell radiating isotropic, homogeneous emission in which single-scattering also takes place is presented and discussed. Within the context of this simplified model, it is found that scattered radiation is an important contribution to the total emergent resonance line flux and that for the He-like family of resonance (r), intercombination (i), and forbidden (f) lines, the ratio G = (f + i)/r would decrease as a function of optical depth for disk-center emission in an extended spherically symmetric corona.

Haisch, B. M.↗
NASA NTRS1985

Deduction of coronal magnetic fields using microwave spectroscopy

Gyroresonance opacity renders the solar corona optically thick at frequencies which are low integral multiples of the local gyrofrequency. This causes the microwave spectrum of sunspots to be sensitive to the strength of coronal magnetic fields. The concept is illustrated by high spectral resolution observations of a sunspot acquired with the Owens Valley frequency-agile interferometer. The observed spectrum is compared to the results of three-dimensional atmospheric model calculations in which the sunspot field is represented by the potential field of a dipole located beneath the photosphere. The comparison enables the depth, orientation and magnetic moment of the dipole that best fits the observations to be determined. Since such observations require that the microwave emission be resolved spectrally, not spatially, the technique may be applicable to the study of stellar coronal fields.

Hurford, G. J.↗
DOE OSTI2023

National Ignition Facility Opacity Time Resolved Spectrometer Systems Engineering Final Project

The National Ignition Facility (NIF) is the world’s largest and most energetic laser facility. The NIF system is designed to produce high energy density (temperature and pressure) conditions through the application of its 192 laser beams. One of the users of NIF is the opacity platform developed to study the opacities at temperatures and densities relevant to the solar interior and stellar evolution. The platform was developed to study iron (Fe) opacity at temperatures relevant to the solar interior. The opacity campaign uses spectrometers to gather data. Spectrometers utilize crystals to produce x-ray spectra that are recorded on time-integrated and time-resolved detectors. The opacity spectrometer (OpSpec) currently fielded and in use at NIF uses a time integrated film channel to collect data. The opacity spectrometer time resolved (OpSpecTR) will utilize novel hCMOS detectors to capture time resolved images of spectra of interest. The key stakeholders identified for OpSpecTR included the physicists responsible for OpSpec and OpSpecTR, the Target Area Science and Engineering (TASE) department at NIF, the NIF and Photon Science (NIF & PS) Opacity program, the Nevada National Security Site (NNSS) Physics and Engineering program, the Sandia hCMOS manufacturing and testing program, and the Los Alamos National Laboratory (LANL) program sponsor. The Target and Experimental Operations (TEXOPS) was identified as a key stakeholder because the group includes the individuals that will physically interact with the OpSpecTR system as it participates in NIF experiments. The opacity platform collects data in a unique orientation relative to the existing diagnostics fielded at NIF. The existing infrastructure at NIF uses a diagnostic manipulator (DIM) to insert the diagnostic near the target chamber center to collect data during a NIF shot. Existing diagnostics collect data through the center line of the DIM axis and collect relevant data perpendicular to this axis. The opacity platform requires crystals mounted in a specific orientation which requires data collection parallel to the DIM axis. This deviation from standard NIF practices was a key factor in developing requirements.

42 ENGINEERING↗
NASA NTRS1993

A deep envelope composition for TX Piscium?

Results of observations of the carbon star TX Psc at high resolution in the 4000/cm spectral region and at moderate resolution from 2500 to 8000/cm are reported. The opacity sampling technique is employed to present model atmospheres of carbon stars with normal solar oxygen abundance and deep envelope composition that include HCN and C2H2. The oxygen abundance of TX Psc is found to be more accurately represented by a deep envelope composition depleted in oxygen by roughly two orders of magnitude than by a solar oxygen abundance. Polyatomic opacities influence the CO line depths and the derived oxygen abundance as a second-order effect. Polyatomic bands appear to be far too strong in the models, implying the need for another source of opacity to backwarm the outer atmosphere and thereby limit the polyatomic band depths. Dust, rather than polyatomic molecules, is a candidate for the backwarming opacity.

Goebel, J. H.↗