Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solar maximum”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Solar maximum thermal surface assessment

The inflight repair of the Solar Maximum Spacecraft provided the first opportunity to make actual measurements of thermal control surfaces after 4 years exposure in low Earth orbit. Defective hardware was replaced by astronauts and returned to Earth while protected from reentry damage in the Shuttle Payload bay. A preliminary thermal surface assessment was made soon after retrieval in support of Space Telescope and other current spacecraft programs. This included visual examination and measurement of Kapton and Teflon film to determine change in thermal radiative properties after 4 years exposure to solar radiation and reaction with atomic oxygen. Comparative measurements were made with a portable solar reflectometer used for inspection of spacecraft hardware. Post flight measurements and observations reveal significant surface changes that further confirm Kapton mass loss predictions made prior to Solar Maximum repair. Details of thermal surface application, measurements and experimental results are presented and discussed.

Rhoads, G. D.↗
NASA NTRS1991

Simultaneous Solar Maximum Mission (SMM) and Very Large Array (VLA) observations of solar active regions

Very Large Array observations at 20 cm wavelength can detect the hot coronal plasma previously observed at soft x ray wavelengths. Thermal cyclotron line emission was detected at the apex of coronal loops where the magnetic field strength is relatively constant. Detailed comparison of simultaneous Solar Maximum Mission (SMM) Satellite and VLA data indicate that physical parameters such as electron temperature, electron density, and magnetic field strength can be obtained, but that some coronal loops remain invisible in either spectral domain. The unprecedent spatial resolution of the VLA at 20 cm wavelength showed that the precursor, impulsive, and post-flare components of solar bursts originate in nearby, but separate loops or systems of loops.. In some cases preburst heating and magnetic changes are observed from loops tens of minutes prior to the impulsive phase. Comparisons with soft x ray images and spectra and with hard x ray data specify the magnetic field strength and emission mechanism of flaring coronal loops. At the longer 91 cm wavelength, the VLA detected extensive emission interpreted as a hot 10(exp 5) K interface between cool, dense H alpha filaments and the surrounding hotter, rarefield corona. Observations at 91 cm also provide evidence for time-correlated bursts in active regions on opposite sides of the solar equator; they are attributed to flare triggering by relativistic particles that move along large-scale, otherwise-invisible, magnetic conduits that link active regions in opposite hemispheres of the Sun.

Willson, Robert F.↗
NASA NTRS2003

The sun and heliosphere at solar maximum

Recent Ulysses observations from the Sun's equator to the poles reveal fundamental properties of the three-dimensional heliosphere at the maximum in solar activity. The heliospheric magnetic field originates from a magnetic dipole oriented nearly perpendicular to, instead of nearly parallel to, the Sun'rotation axis. Magnetic fields, solar wind, and energetic charged particles from low-latitude sources reach all latitudes, including the polar caps. The very fast high-latitude wind and polar coronal holes disappear and reappear together. Solar wind speed continues to be inversely correlated with coronal temperature. The cosmic ray flux is reduced symmetrically at all latitudes.

magnetic field solar winds galactic cosmic rays↗
NASA NTRS2012

The Effects of Solar Maximum on the Earth's Satellite Population and Space Situational Awareness

The rapidly approaching maximum of Solar Cycle 24 will have wide-ranging effects not only on the number and distribution of resident space objects, but also on vital aspects of space situational awareness, including conjunction assessment processes. The best known consequence of high solar activity is an increase in the density of the thermosphere, which, in turn, increases drag on the vast majority of objects in low Earth orbit. The most prominent evidence of this is seen in a dramatic increase in space object reentries. Due to the massive amounts of new debris created by the fragmentations of Fengyun-1C, Cosmos 2251 and Iridium 33 during the recent period of Solar Minimum, this effect might reach epic levels. However, space surveillance systems are also affected, both directly and indirectly, historically leading to an increase in the number of lost satellites and in the routine accuracy of the calculation of their orbits. Thus, at a time when more objects are drifting through regions containing exceptionally high-value assets, such as the International Space Station and remote sensing satellites, their position uncertainties increase. In other words, as the possibility of damaging and catastrophic collisions increases, our ability to protect space systems is degraded. Potential countermeasures include adjustments to space surveillance techniques and the resetting of collision avoidance maneuver thresholds.

Johnson, Nicholas L.↗
NASA NTRS2018

GONG Catalog of Solar Filament Oscillations Near Solar Maximum

We have cataloged 196 filament oscillations from the Global Oscillation Network Group Hα network data during several months near the maximum of solar cycle 24 (2014 January–June). Selected examples from the catalog are described in detail, along with our statistical analyses of all events. Oscillations were classified according to their velocity amplitude: 106 small-amplitude oscillations (SAOs), with velocities <10 km s-1, and 90 large-amplitude oscillations (LAOs), with velocities >10 km s-1. Both SAOs and LAOs are common, with one event of each class every two days on the visible side of the Sun. For nearly half of the events, we identified their apparent trigger. The period distribution has a mean value of 58 ± 15 minutes for both types of oscillations. The distribution of the damping time per period peaks at τ/P = 1.75 and 1.25 for SAOs and LAOs, respectively. We confirmed that LAO damping rates depend nonlinearly on the oscillation velocity. The angle between the direction of motion and the filament spine has a distribution centered at 27° for all filament types. This angle agrees with the observed direction of filament-channel magnetic fields, indicating that most of the cataloged events are longitudinal (i.e., undergo field-aligned motions). We applied seismology to determine the average radius of curvature in the magnetic dips, R ≈ 89 Mm, and the average minimum magnetic field strength, B ≈ 16 G. The catalog is available to the community online and is intended to be expanded to cover at least 1 solar cycle.

Filaments↗
NASA NTRS1984

Studies of solar magnetic fields during the solar maximum year

Observations and studies of solar magnetic fields that were carried out during the period of the solar maximum year (SMY) January 1980 to June 1981, are reviewed with the goal of providing a summary of what was learned about solar magnetic fields during the SMY. Such subjects as the relationship between solar magnetic fields and flares, the role of magnetic fields in the sunspot phenomenon, the magnetic-canopy structure overlying the supergranular network as well as the turbulent magnetic fields within the network, the fields within the polar crown prominences, and the solar magnetic cycle are addressed.

Hagyard, M. J.↗
NASA NTRS1987

Ionospheric electron temperature at solar maximum

Langmuir-probe measurements made at solar maximum from the DE-2 satellite in 1981 and 1982 are used to examine the latitudinal variation of electron temperature at altitudes between 300 and 400 km and its response to 27-day variations of solar EUV. A comparison of these data with models based on solar-minimum measurements from the AE-C suggests that the daytime electron temperature does not change very much during the solar cycle except at low latitudes where a particularly large 27-day variation occurs. It is found that the daytime electron temperature near the F2 peak is more responsive to short-term variations in F10.7 than to any longer-term changes that may occur between solar minimum and maximum.

Brace, L. H.↗
NASA NTRS1982

Solar flare X-ray spectra from the Solar Maximum Mission Flat Crystal Spectrometer

High-resolution solar X-ray spectra obtained with the Flat Crystal Spectrometer aboard the Solar Maximum Mission from two solar flares and a nonflaring active region are analyzed. The 1-22 A region was observed during the flare on 1980 August 25, while smaller spectral regions were repeatedly covered during the 1980 November 5 flare. Voigt profiles were fitted to spectral lines to derive accurate wavelengths and to resolve blends. During the August 25 flare, 205 lines were found in the range 5.68-18.97 A, identifications being provided for all but 40 (mostly weak) lines. Upper limits to flare densities are derived from various line ratios, the hotter (about 10 to the 7th K) ions giving an electron density of less than 10 to the 12th per cu cm for the August 25 flare. Other observed line ratios (e.g., in Fe XVII and Mg XII) indicate a need for revisions in theoretical calculations.

Phillips, K. J. H.↗
NASA NTRS1980

Proximity operations analysis: Retrieval of the solar maximum mission observatory

Retrieval of the solar maximum mission (SMM) observatory is feasible in terms of orbiter primary reaction control system (PRCS) plume disturbance of the SMM, orbiter propellant consumed, and flight time required. Man-in-loop simulations will be required to validate these operational techniques before the verification process is complete. Candidate approach and flyaround techniques were developed that allow the orbiter to attain the proper alinement with the SMM for clear access to the grapple fixture (GF) prior grappling. Because the SMM has very little control authority (approximately 14.8 pound-foot-seconds in two axes and rate-damped in the third) it is necessary to inhibit all +Z (upfiring) PRCS jets on the orbiter to avoid tumbling the SMM. A profile involving a V-bar approach and an out-of-plane flyaround appears to be the best choice and is recommended at this time. The flyaround technique consists of alining the +X-axes of the two vehicles parallel with each other and then flying the orbiter around the SMM until the GF is in view. The out-of-plane flyaround technique is applicable to any inertially stabilized payload, and, the entire final approach profile could be considered as standard for most retrieval missions.

Yglesias, J. A.↗
NASA NTRS1992

The 1988 Solar Maximum Mission event list

Information on solar burst and transient activity observed by the Solar Maximum Mission (SMM) during 1988 pointed observations is presented. Data from the following SMM experiments are included: (1) gamma ray spectrometer; (2) hard x ray burst spectrometer; (3) flat crystal spectrometers; (4) bent crystal spectrometer; (5) ultraviolet spectrometer polarimeter; and (6) coronagraph/polarimeter. Correlative optical, radio, and Geostationary Operational Environmental Satellite (GOES) x ray data are also presented. Where possible, bursts, or transients observed in the various wavelengths were grouped into discrete flare events identified by unique event numbers. Each event carries a qualifier denoting the quality or completeness of the observation. Spacecraft pointing coordinates and flare site angular displacement values from sun center are also included.

Dennis, B. R.↗
NASA NTRS1992

The 1984 - 1987 Solar Maximum Mission event list

Information on solar burst and transient activity observed by the Solar Maximum Mission (SMM) during 1984-1987 pointed observations is presented. Data from the following SMM experiments are included: (1) gamma ray spectrometer; (2) hard x-ray burst spectrometer; (3) flat crystal spectrometer; (4) bent crystal spectrometer; (5) ultraviolet spectrometer polarimeter; and (6) coronograph/polarimeter. Correlative optical, radio, and Geostationary Operational Environmental Satellite (GOES) x ray data are also presented. Where possible, bursts or transients observed in the various wavelengths were grouped into discrete flare events identified by unique event numbers. Each event carries a qualifier denoting the quality or completeness of the observations. Spacecraft pointing coordinates and flare site angular displacement values from sun center are also included.

Dennis, B. R.↗
NASA NTRS2000

Fine Structure in the Corona and Solar Wind at High Heliographic Latitudes at Solar Maximum

Microstreams and pressure balance structures in fast solar wind were more easily detected at Ulysses at 2.2 AU over the poles than at Helios at 0.3 AU. This is because solar rotation brings sources of fast solar wind beneath sources of slow solar wind at a rate that depends on latitude, for the same size features. Dynamic interaction between the fast and slow wind tends to mix the flows and make features more difficult to detect with increasing distance from the Sun. A given sized feature takes proportionally longer to pass a longitude when it is at 80 degrees latitude than when it is at the equator. At solar maximum, Ulysses will mainly be sampling solar wind coming from above streamers and from near streamers. The data will provide information on fine structure at the tops of streamers - the stalks - and on the source of slow solar wind, The visibility of the boundaries between fast and slow wind and of the stalk will increase with increasing latitude. We will present quantitative calculations of the visibility of various sized features, with various differences in flow speed, at the location of Ulysses when it is over the south (in 2000) and north (in 2001) polar regions of the Sun.

Suess. S. T.↗
NASA NTRS2001

Fine Structure in the Corona and Solar Wind at High Heliographic Latitudes at Solar Maximum

Microstreams and pressure balance structures in fast solar wind were more easily detected at Ulysses at 2.2 AU over the poles than at Helios at 0.3 AU. This is because solar rotation brings sources of fast solar wind beneath sources of slow solar wind at a rate that depends on latitude, for the same size features. Dynamic interaction between the fast and slow wind tends to mix the flows and make features more difficult to detect with increasing distance from the Sun. A given sized feature takes proportionally longer to pass a longitude when it is at 80 degrees latitude than when it is at the equator. At solar maximum, Ulysses will mainly be sampling solar wind coming from above streamers and from near streamers. The data will provide information on fine structure at the tops of streamers - the stalks - and on the source of slow solar wind. The visibility of the boundaries between fast and slow wind and of the stalk will increase with increasing latitude. I will present quantitative calculations of the visibility of various sized features, with various differences in flow speed, at the location of Ulysses when it is over the south (in 2000) and north (in 2001) polar regions of the Sun.

Suess, S. T.↗
NASA NTRSDate not supplied

Shielding Considerations for CubeSat Structures During Solar Maximum

The purpose of this lessons learned is to communicate the utility of shielding in small spacecraft planning for the support of mission assurance and reliability. Numerous SmallSats have been flying in polar low earth orbit for scientific, communications, technology demonstrations, and imaging with academic, commercial, and government interests. Shielding has been part of mission assurance and reliability from the advent of long duration spacecraft missions. The Shields-1 CubeSat has been operating in polar low earth orbit since 16 December 2018 with atomic number (Z)-grade radiation shielding and demonstrates shielding effectiveness. Shields-1 has collected a representative example of solar minimum data in 2019 with 8 Teledyne dosimeters over varying shielding effectiveness. It serves as current experimental data and has been compared with NOVICE Shielding estimates using the AP8 –AE8 trapped radiation model with the Shields-1 CAD and generic CubeSat 3 unit (U) models. Using NOVICE model radiation analysis coding, the shielding effectiveness's, based on a generic CubeSat 3U structure with 4 electronic boards, were estimated for aluminum wall thicknesses ranging from 0.204 cmto4.44 cm (0.550 g/cm2–12.0 g/cm2) thick aluminum. For modeled polar orbiting spacecraft, solar maximum total ionizing dose (TID)increases by nearly a magnitude for thin-walled aluminum 0.550g/cm2-0.686 g/cm2(0.204 cm –0.254 cm) typical CubeSat structures. The shielding effectiveness by NOVICE Sigma estimates, which is a shielding sphere approximation around a detector, showed a linear relationship with wall thickness, which increased over the wall thickness by a ratio of 1.43 determined by linear regression analysis. Using NOVICE Adjoint Monte-Carlo Modeling of solar minimum and solar maximum with the inclusion of a worst-case solar particle event over a one year mission without geomagnetic shielding, the TID for minimum and maximum conditions for a generic 3U with a wall thickness of 0.254 cm is 158 RAD and 1540 RAD, respectively. The modeled total solar maximum TID is over estimated, because at low orbital latitudes a spacecraft will have shielding from Earth's magnetic field. However, TID will still be significant at high latitudes over the poles, where a spacecraft is exposed in a solar particle event. In contrast, to a thin walled generic 3U CubeSat, Shields-1 electronics enclosure has a shielding effectiveness of 21.3 g/cm2from NOVICE Sigma modeling and is expected to show reduced total ionizing dose increases during the present active Solar Cycle 25 period. Because solar particle events during solar maximum increase TID on electronic parts with thin-walled shielding in short periods of time, it is a mission assurance and reliability consideration on the spacecraft’s mission value versus adding shielding for risk reduction of premature spacecraft or instrument payload loss. Since the volumes of many instruments and system electronics have reduced with small spacecraft, shielding material costs and weight penalties have diminished. A small spacecraft project budget and schedule may limit traditional radiation-hardened part use and radiation testing requirements, where shielding can contribute to mission assurance and reliability with reduced costs.

Shields-1↗
NASA NTRSDate not supplied

Shielding Considerations for CubeSat Structures During Solar Maximum

The purpose of this lessons learned paper is to communicate the utility of shielding in small spacecraft planning for the support of mission assurance and reliability. Numerous SmallSats have been flying in polar low Earth orbit for science, communications, technology demonstrations, and imaging with academic, commercial, and government interests. Shielding has been part of mission assurance and reliability from the advent of long duration spacecraft missions. The Shields-1 CubeSat has been operating in polar low Earth orbit since 16 December 2018 with atomic number (Z)-grade radiation shielding and demonstrates shielding effectiveness. Shields-1 has collected a representative example of solar minimum data in 2019 with eight Teledyne µDosimeters over varying shielding effectivenesses. It serves as current experimental data and has been compared with NOVICE Shielding estimates using the AP8 – AE8 trapped radiation model with the Shields-1 CAD and generic CubeSat three unit (3U) models. Using NOVICE model radiation analysis coding, the shielding effectivenesses, based on a generic CubeSat 3U structure with four electronic boards, were estimated for aluminum wall thicknesses ranging from 0.204 cm to 4.44 cm (0.550 g/cm 2 to 12.0 g/cm 2 ). For modeled polar orbiting spacecraft, solar maximum total ionizing dose (TID) increases by nearly a magnitude for thin-walled aluminum 0.550-g/cm 2 - 0.686-g/cm 2 (0.204-cm – 0.254-cm) typical CubeSat structures. The shielding effectiveness estimated by NOVICE Sigma, which is a shielding sphere approximation around a detector, showed a linear relationship with wall thickness, which increased over the wall thickness by a ratio of 1.43 determined by linear regression analysis. Using NOVICE Adjoint Monte-Carlo Modeling of solar minimum and solar maximum with the inclusion of a worst-case solar particle event over a one-year mission without geomagnetic shielding, the TID for minimum and maximum conditions for a generic 3U with a wall thickness of 0.254 cm is 158 RAD and 1540 RAD, respectively. The modeled total solar maximum TID is over estimated, because at low orbital latitudes a spacecraft will have shielding from the Earth’s magnetic field. However, TID will still be significant at high latitudes over the poles, where a spacecraft is exposed in a solar particle event. In contrast to a thin-walled generic 3U CubeSat, the Shields-1 electronics enclosure has a shielding effectiveness of 21.3 g/cm 2 from NOVICE Sigma modeling and is expected to show reduced total ionizing dose increases during the present active Solar Cycle 25 period. Because solar particle events during solar maximum increase TID on electronic parts with thin-walled shielding in short periods of time, it is a mission assurance and reliability consideration on the mission value of the spacecraft versus adding shielding for risk reduction of premature spacecraft or instrument payload loss. Since the volumes of many instruments and system electronics have reduced with small spacecraft, shielding material costs and weight penalties have diminished. A small spacecraft project budget and schedule may limit traditional radiation-hardened part use and radiation testing requirements, where shielding can contribute to mission assurance and reliability with reduced costs.

Shields-1↗
NASA NTRS1980

The High Altitude Observatory Coronagraph/Polarimeter on the Solar Maximum Mission

The paper examines the High Altitude Observatory Coronagraph/Polarimeter designed to produce images of the solar corona in 7 wavelength bands in the visible spectral range, and to be flown on the NASA Solar Maximum Mission satellite. The spectral bands were chosen to exclude or include 'chromospheric' spectral lines, so as to allow discrimination between ejecta at coronal and chromospheric temperatures. The major goals of the instrument include: (1) observation of the corona in the flare process and of the ejecta from the flare site and the overlying corona, and (2) examination of the evolution of the solar corona near the period of solar maximum activity.

Macqueen, R. M.↗
NASA NTRS1986

The effect of the heliospheric current sheet on cosmic ray intensities at solar maximum - Two alternative hypotheses

The capabilities of two alternative models for accounting for the reversal of the solar magnetic field polarity at the point of solar maximum and for the associated modulation of cosmic ray intensities at 1 AU are assessed. One model posits a continuous increase in the inclination of the heliospheric current sheet to a point of verticality at maximum, when it overturns and the reversal occurs. The alternative view is that the sun sheds the magnetic field of the previous cycle and generates a new field of opposite polarity. Some data do exist for a tilted current sheet which increases its tilt with proximity to the solar maximum. However, coronal data also support the presence of isolated regions of anomalous polarity which spread over the surface of the sun as maximum approaches, a condition commensurate with flux shedding. Both models predict heliospheric current sheet configurations which would produce some cosmic ray modulations observed over the course of the solar cycle.

Thomas, B. T.↗
NASA NTRS1980

In-flight calibration of the fine pointing Sun sensor on the solar maximum mission

The attitude control objectives of solar maximum mission are to point the boresight of the payload fine pointing sun sensor (FPSS) to any point within 30 arc-minutes of the Sun's center with an accuracy of 5 arc-seconds (3 sigma, pitch and yaw) and a jitter of less than 3 arc-seconds (3 sigma). To meet these stringent accuracy requirements, a procedure was developed for in-flight calibration of the FPSS. The spacecraft was maneuvered using FPSS offset commands to position the Sun at different points within the FPSS field of view. The coefficients of the FPSS digital to analog nonlinear transfer function were determined by minimizing the residuals between the pitch and yaw angles computed from the FPSS measurements and the corresponding reference angles obtained from inertial reference unit measurements. The actual in-flight calibration and the calibration algorithm are discussed.

Gambardella, P. J.↗