SEARCH · Engineering Papers
Results for “solar activity”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Techno-Economic Analysis of a Concentrating Solar Power Plant Using Redox-Active Metal Oxides as Heat Transfer Fluid and Storage Media
We present results for a one-dimensional quasi-steady-state thermodynamic model developed for a 111.7 MW e concentrating solar power (CSP) system using a redox-active metal oxide as the heat storage media and heat transfer agent integrated with a combined cycle air Brayton power block. In the energy charging and discharging processes, the metal oxide CaAl 0.2 Mn 0.8 O 2.9-δ (CAM28) undergoes a reversible, high temperature redox cycle including an endothermic oxygen-releasing reaction and exothermic oxygen-incorporation reaction. Concentrated solar radiation heats the redox-active oxide particles under partial vacuum to drive the reduction extent deeper for increased energy density at a fixed temperature, thereby increasing storage capacity while limiting the required on sun temperature. Direct counter-current contact of the reduced particles with compressed air from the Brayton compressor releases stored chemical and sensible energy, heating the air to 1,200°C at the turbine inlet while cooling and reoxidizing the particles. The cool oxidized particles recirculate through the solar receiver subsystem for another cycle of heating and reduction (oxygen release). We applied the techno-economic model to 1) size components, 2) examine intraday operation with varying solar insolation, 3) estimate annual performance characteristics over a simulated year, 4) estimate the levelized cost of electricity (LCOE), and 5) perform sensitivity analyses to evaluate factors that affect performance and cost. Simulations use hourly solar radiation data from Barstow, California to assess the performance of a 111.7 MW e system with solar multiples (SMs) varying from 1.2 to 2.4 and storage capacities of 6–14 h. The baseline system with 6 h storage and SM of 1.8 has a capacity factor of 54.2%, an increase from 32.3% capacity factor with no storage, and an average annual energy efficiency of 20.6%. Calculations show a system with an output of 710 GWh e net electricity per year, 12 h storage, and SM of 2.4 to have an installed cost of $329 million, and an LCOE of 5.98 ¢/kWh e . This value meets the U.S. Department of Energy’s SunShot 2020 target of 6.0 ¢/kWh e ( U. S Department of Energy, 2012 ), but falls just shy of the 5.0 ¢/kWh e 2030 CSP target for dispatchable electricity ( U. S Department of Energy, 2017 ). The cost and performance results are minimally sensitive to most design parameters. However, a one-point change in the weighted annual cost of capital from 8 to 7% (better understood as a 12.5% change) translates directly to an 11% decrease (0.66 ¢/kWhe) in the LCOE.
Photonic Curing of Nickel Oxide Transport Layer and Perovskite Active Layer for Flexible Perovskite Solar Cells: A Path Towards High-Throughput Manufacturing
High-throughput roll-to-roll (R2R) manufacturing of perovskite solar cells (PSCs) is currently limited by thermal processes that take tens of minutes each, translating to impractically long annealing tools at high web speeds. In addition, PSCs are usually made with metal oxide transport layer materials that require high temperatures for thermal annealing. Here, we demonstrate the fabrication of PSCs using photonic curing, instead of thermal annealing, to convert NiO x directly from sol-gel precursors for hole transport layers and to crystallize methylammonium lead iodide (MAPbI 3 ) active layers on flexible Willow ® Glass substrates. Photonic curing uses short, intense pulses of light to process materials at a high speed, hence it is compatible with R2R manufacturing. We achieved power conversion efficiencies (PCEs) of 11.7% in forward-scan and 10.9% in reverse-scan for PSCs made with photonic cured NiO x and MAPbI 3 films. Furthermore, both NiO x and MAPbI 3 films could be processed with a single photonic curing pulse, with a web speed of 5.7 m/min, and still produce PCEs comparable to thermally annealed control samples. Based on the single-pulse photonic curing condition for each film, we project a web speed of 26 m/min, laying a pathway to high-throughput production of perovskite solar modules.
Pulsed laser deposition of delafossite oxide thin films on YSZ (001) substrates as solar water splitting photocathodes
Development of solar energy converters with earth-abundant and environmentally friendly materials is one of the key routes explored towards a sustainable future. In this work, crystalline delafossite-phase CuAlO 2 and CuFeO 2 thin film solar water splitting photocathodes were fabricated using pulsed laser deposition. It was found that the desired delafossite phase was formed only after high temperature annealing in an oxygen-free atmosphere. Further, the homogeneous delafossite bulk structure of the films was determined by correlating simulation results from first-principles calculations with synchrotron-based X-ray absorption near edge structure (XANES) spectroscopy. Both CuAlO 2 and CuFeO 2 photocathodes are active for solar water splitting, with the latter more efficient due to its narrower band gap and improved light absorption.
The Effects of Chromophore Halogenation on the Stability of UV-Absorbing Organic Solar Cells
Explore the source record for details and available documents.
BODIPY based A-D-A molecules: Effect of CF3 group substitution at meso phenyl group
Two pairs of A-D-A molecules have been created with fluorene and benzodithiophene as the central donor subunits and terminal BODIPY units, functionalized with either a 4-methylphenyl or 4-trifluoromethylphenyl group at the meso position. The effect of the para substituent of the meso phenyl group on the photophysical properties of these molecules is studied through steady state absorption and fluorescence spectroscopy as well as femtosecond transient absorption and time resolved fluorescence spectroscopy techniques. Applicability of these molecules as donors in solution processed solar cell active layers was investigated through time resolved microwave conductivity measurements on blends with PC60BM acceptor, which shows a varying yield of charge transfer with choice of substituent. Transient absorption spectroscopy is then employed to investigate the role of the 4-trifluoromethylphenyl group in altering the efficiency of charge transfer from these A-D-A molecules to PC60BM. The results show a consistent picture of picosecond charge transfer and a component of a few hundred ps geminate recombination that results in a small yield of long-lived free charges optimized for the methylphenyl derivatives.
Atmospheric 81 Kr as an Integrator of Cosmic-Ray Flux on the Hundred-Thousand-Year Time Scale
The atmospheric abundance of 81 Kr is a global integrator of cosmic rays. It is insensitive to climate shifts, geographical variations, and short-term solar cycle activity, making it an ideal standard to test models of cosmic-ray flux on the time scale of 10 5 years. In this work, we present the first calculation of absolute 81 Kr production rates in the atmosphere, and a measurement of the atmospheric 81 Kr/Kr abundance via the Atom Trap Trace Analysis method. The measurement result significantly deviates from previously reported values. The agreement between measurement and model prediction supports the current understanding of the production mechanisms. Additionally, the calculated 81 Kr atmospheric inventory over the past 1.5 Myr provides a more accurate input function for radiokrypton dating.
Mars-Ward Ion Flows in the Martian Magnetotail: Mars Express Observations
In this work, we investigate Mars-ward planetary ions (O + and O 2 + ) in the Martian magnetotail that potentially reduce the amount of escaping ions. The global properties of Mars-ward flows in the Martian magnetotail are characterized, based on over 13-years of ion data (May 2007–December 2020) collected by the Analyzer of Space Plasma and Energetic Atoms instrument on Mars Express. We find that Mars-ward flows are frequently observed in the vicinity of the crustal fields, implying that crustal fields may play a key role in producing such flows. The occurrence rate and sunward flux are found higher during solar maximum than solar minimum. However, the occurrence rate and flux of Mars-ward flows are relatively low. This is different from the case at Venus, where the planetward flows can significantly decrease the total escape rates of ions.
Defect activation and annihilation in CIGS solar cells: an operando x-ray microscopy study
Not Available
Activating Opportunity Zones for Rapid Solar+Storage Deployment in Low Income Communities (Final Report)
Millions of Texans choose their own power provider, giving them the option to have low-cost and even renewable energy delivered through their retail electric plan. However, Texans with less disposable income often pay more for electricity and have limited access to green energy and emergency backup power even though the costs of solar and wind power are at record lows and continue to decline. The Powered for Good initiative aimed to help deliver clean, affordable, 100% renewable electricity to low-income households in Texas’s Competitive Retail Areas, where households can choose their electricity provider. Objectives: The primary goal of this project was to develop and validate one or more affordable solar+storage products (i.e., priced less than of $0.14/kWh) that Retail Electricity Providers (REP) can offer to LI households. The team achieved three objectives: 1. Investigate how to best reduce electricity costs and increase availability of emergency power for LI customers; 2. Build momentum for, and facilitate an approach to, a Texas-based pilot deployment of such solar+storage products, with a goal of greatly expanding this approach to a large segment of the LI population in Texas; 3. Provide the structural framework, finance model, and roadmap to potentially increase investment of solar+storage projects in LI communities across U.S. states when modified to meet their state-specific laws and regulations. The team evaluated the market of viable solutions for low-income Texans through interviews and focus groups with professionals and residents with lived experience. The team then piloted a low-cost retail electric product. Following the pilot, the team developed educational materials, including fact sheets, a Go Green Save Green interactive guide, and an Electricity Bill Analysis Tool. The team is now working to increase power resilience and reduce energy insecurity with micro solar and storage in partnership with local entities in the Harris County area. Key Findings: Informed by Powered for Good research, including the experiences on Texas residents and electricity system experts, the Powered for Good team developed a pilot that was implemented by Energy Well Texas, a new company formed in late 2020. The pilot featured a combination of a 100% clean residential energy offering delivered through the electrical grid plus a selection of batteries, lights and a solar panel that provided participants with varying levels of backup power. For the 8 customers who submitted previous bills, the Energy Well Texas pilot reduced energy bills by about 30%. In Houston, residents earning less than 30% of Area median Income (AMI) spend an average 13% of their income on energy or about $1,555 per year. Repeating the pilot results for these residents could yield $466 in savings per customer or about 4% of their income. While this will not end energy poverty, it is a big step toward that goal. The Powered for Good and Energy Well Texas teams are currently planning their post-pilot phase of service offerings.
Dynamic Formation of a Transient Jet from Arched Magnetized Laboratory Plasma
Abstract A laboratory plasma experiment was built to explore the eruptive behavior of arched magnetized plasmas with dimensionless parameters relevant to the Sun’s photosphere ( β ≈ 10 −3 , Lundquist number ≈10 4 , plasma radius/ion gyroradius ≈20, ion–neutral collision frequency ≫ion cyclotron frequency). Dynamic formation of a transient plasma jet was observed in the presence of the strapping magnetic field. The eruption leading to the jet is unintuitive because the arched plasma is both kink- and torus-stable. The jet structure erupts within a few Alfvén transit times from the formation of the arched plasma. Extensive measurements of plasma temperature, density, magnetic field, and flows are presented. In its early stages, the jet plasma flows away from the arch with supersonic speeds (Mach 1.5). This high-speed flow persists up to the resistive diffusion time in the arched plasma and is driven by large gradients in the magnetic and thermal pressures near the birthplace of jets. There are two distinct electric current channels within the jet, one consisting of outgoing electrons and another composed of electrons returning to the anode footpoint. Significant current density around the jet is a consequence of the diamagnetic current produced by a large thermal pressure gradient in the jet. Ion–neutral charge-exchange collisions provide an efficient mechanism to produce the cross-field current and control the dynamics of the complex current channels of the jet.
Optimized AC/DC Dual Active Bridge Converter using Monolithic SiC Bidirectional FET (BiDFET) for Solar PV Applications
Grid interface power conversion systems for commercial, industrial and residential solar power generation are becoming ubiquitous due to the competitive cost of solar energy. The AC/DC dual active bridge (DAB) converter is an upcoming topology in industrial PV energy and energy storage applications, providing bidirectional power transfer and galvanic isolation. In this paper, the properties of a DAB-type converter are leveraged to propose a design optimization process. It can optimize the high-frequency RMS current, size of magnetic elements and zero-voltage-switching (ZVS) region of the converter. The resulting design is compared against that derived from a conventional approach. In addition, an algorithm to compute the harmonic currents at the DC and line frequency AC ports of the system is proposed, and the respective filter designs are presented. The optimized design of the AC/DC DAB converter is implemented using the newly developed, 1200 V, 46 mΩ, four quadrant, SiC-based monolithic bidirectional FETs (BiDFET). Experimental results from the 2.3 kW, 400V/277VRMS hardware prototype are finally presented to verify the design process.
Developing a Deep Learning-Computer Vision Framework to Monitor Avian Interactions with Solar Energy Facility Infrastructure (Final Technical Report)
The project addressed an inability to monitor avian interactions with photovoltaic (PV) solar energy facilities necessary for understanding PV solar impacts on birds. In the project, machine-vision technology that continuously monitors avian activities at PV solar facilities was developed. The technology includes four machine-learning (ML) models, each of which accomplishes a specific task in detecting birds and classifying their activities in live or recorded videos—detecting and tracking moving objects, differentiating birds from other objects, detecting bird collisions with solar panels, and classifying non-collision bird activities around PV facilities. Major project outcomes include adoption by two of DOE SETO’s SolWEB projects, providing novel observational data on birds to promote co-location of PV solar development and habitat conservation, known as ecovoltaics.
Prospects for metal halide perovskite-based tandem solar cells
Over the past decade, metal halide perovskite photovoltaics have been a major focus of research, with single-junction perovskite solar cells evolving from an initial power conversion efficiency of 3.8% to reach 25.5%. The broad bandgap tunability of perovskites makes them versatile candidates as the subcell in a tandem photovoltaics architecture. Stacking photovoltaic absorbers with cascaded bandgaps in a multi-junction device can potentially overcome the Shockley–Queisser efficiency limit of 33.7% for single-junction solar cells. There is now intense activity in developing tandem solar cells that pair perovskite with either itself or with a variety of mature photovoltaic technologies such as silicon and Cu(In,Ga)(S,Se) 2 (CIGS). In this review, we survey recent advances in the field and discuss its outlook.
Montana Community-Scale Solar Strategy Project (Final Technical Report)
Grid-tied solar photovoltaic (PV) development began gradually in Montana, initially taking root in the early 2000s, largely in the form of small residential systems, rarely larger than two kilowatts. Utility support for solar technology through public benefit funding triggered the installation of the state’s first solar PV installations on community-owned facilities including schools, libraries, fire stations and local government buildings in the mid-2000s. By 2016, solar PV installations totaled approximately 28 megawatts of installed capacity, generating less than 0.05% of electricity sold in Montana. Montana’s solar fleet in 2016 included 17 megawatts of utility-scale solar farms, and three shared solar projects developed by rural electric cooperatives that ranged from 25 to 50 kilowatts in size. However, with only 3,000 households utilizing solar PV, either through an on-site installation or participation in a shared solar project, the potential benefits and reach of solar technology was limited. The Montana Solar Community Project (MSCP) was developed by the Montana Energy Office (MEO) at the Department of Environmental Quality in order to implement a “community-scale” solar energy strategy for the state that would cost-effectively expand Montanans’ access to solar PV. This project defines three types of community-scale solar projects: shared solar, community-sited solar, and group purchasing programs. The MSCP project conducted research and stakeholder engagement that helped to inform and develop model community-scale initiatives and an overarching community-scale solar strategy for Montana. Specifically, the project included a solar market assessment, stakeholder meetings across Montana, development of a menu of community-scale solar options, a study of solar potential on schools, community solar market research, and community-scale project implementation support. MSCP activities were successful in implementing solar projects and supporting solar development in communities across Montana. Project activities realized 280 kW of newly installed solar from two solarize programs, a shared solar array at a rural electric cooperative, and a solar array atop a Bozeman high school. The community-scale project implementation support and Solar on Schools components of the project resulted directly in the analysis and design of nearly 2 MW of distributed solar systems across the state. The Solar on Schools analysis alone produced solar designs for 25 schools, representing 920.8 kW of solar potential. Many of the deliverables from this project provide guidance on future development of community-scale solar in Montana, and resulted in a number of important conclusions about community-scale solar in Montana. There is strong interest in community-scale solar in Montana, as noted during stakeholder meetings, in response to solar market research surveys, and as seen by applications for implementation support grants provided by MEO. Project activities also suggest that Montanans demonstrated a desire and need for more information about solar energy technology, solar financing options, and the state’s policy and regulatory framework. Additionally, the project found that schools will be key partners for future community-scale solar programs. In addition to being excellent hosts for solar arrays, schools have the opportunity to use the installation of a solar array to develop educational materials and curricula to educate Montana’s future leaders about these technologies, which can be shared and replicated across the state. Project activities laid a clear path forward for solar energy in Montana. Certain activities have concrete next steps. For example, numerous solar arrays were designed for schools and other public buildings around the state. Many of those designs will be used as soon as funding becomes available. Other activities have less developed next steps, though lay the foundation for future work. The solar market assessment, solar market research, and community stakeholder meetings are good examples. These documents can be used as stepping stones to increase renewable energy education, increase stakeholder outreach, and support communities as they seek to develop community-scale solar projects.
Development of rigidity-controlled terpolymer donors for high-performance and mechanically robust organic solar cells
The electro-active third component (BID)-incorporated PM6-B10-based organic solar cell shows a high performance (PCE = 17.2%) and mechanical stretchability (COS avg = 11.4%), outperforming the PM6-based device (PCE = 15.8%, COS avg = 2.0%).
Antimony Chloride Treatments of CdTe-Based Solar Cells
Development of a new SbCl3-based solution treatment for chloride activation of CdTe-based solar cells is described. Activation was confirmed with CdSeTe:Sb devices exhibiting VOC > 550 mV and JSC > 25 mAcm-2. Treatment optimization showed strong effects of annealing time and temperature on cell properties. Material characterization indicated surface conversion of CdSeTe to CdCl2 and Sb2Te3 with SbCl3 treatment. However, no reaction products were formed with treatment under inert conditions, which was coupled with poor device performance. Drying the SbCl3 films at controlled humidity conditions confirmed that exposure to high relative humidity is critical for CdSeTe activation, through hydrolysis of SbCl3. Mechanistic details of SbCl3 speciation during hydrolysis and annealing to activate CdSeTe are discussed.