Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “so2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Thermodynamic state of SO2 on Io's surface

It has been suggested that surface conditions on Io might be conducive to significant SO2 adsorption on sulfur or alkali sulfides. A number of spectroscopic arguments for and against the high abundance of a SO2 adsorbate (versus frost) on Io have been made. SO2 absorption isotherms on particulate sulfur are measured, and the question of SO2 adsorbate/ice is approached from a thermodynamic perspective. Because of formidable experimental difficulties, data were not obtained at the very low temperatures and P(SO2) characteristics of Io; however, data were obtained over a wide range of pressures and temperatures somewhat higher than Io's and extrapolated to Io surface conditions. Errors in estimating adsorptive capacity accrue through extrapolation of the adsorption isotherms; however, more significant is the addition of the solid SO2 equilibrium vapor pressure curve to the phase diagram. The formation of ice places a strict upper limit on adsorptive coverage at any temperature. The limit for Io based upon the data is calculated, and it is shown that no more than 0.014 monolayers of SO2 can adsorb on sulfur at Io temperatures. Given the assumption that sulfur forms the primary adsorbent on Io's surface, or the assumption that the adsorptive capacity of the other adsorbents is not substantially greater than that of sulfur, this explains the fact that the nu(1) + nu(3) band center position is in better agreement with that of frost than adsorbate.

Zent, Aaron P.↗
NASA NTRS1992

Mt. Pinatubo SO2 column measurements from Mauna Loa

Absorption features of the nu sub 1 band of SO2 are identified in high-resolution IR solar-absorption spectra recorded from Mauna Loa, Hawaii, on July 9 and 12, 1991, shortly after the arrival of the first eruption plume from the Mt. Pinatubo volcano. A total SO2 vertical column amount of (5.1 +/- 0.5) x 10 exp 16 molecules/sq cm on July 9 is retrieved based on nonlinear least-squares spectral fittings of 9 selected SO2 absorption features with an updated set of SO2 spectral parameters. A SO2 total-column upper limit of 0.9 x 10 exp 16 molecules/sq cm deduced from measurements on September 20-24, 1991, is consistent with the dispersion of the SO2 cloud and the rapid conversion of the SO2 vapor into volcanic aerosol particles.

Goldman, A.↗
NASA NTRS1993

Measurements of dimethyl sulfide and SO2 during GTE/CITE 3

As part of NASA's Tropospheric Experiment Chemical Instrumentation Test and Evaluation (GTE/CITE 3) Sulfur Gas Intercomparison, we conducted measurements of dimethyl sulfide (DMS) and SO2 using two techniques well suited for sampling from an aircraft due to their simplicity of design. DMS was collected by preconcentration on gold wire preceded by a KOH-impregnated filter oxidant scrubber, and analyzed by gas chromatography with flame photometric detection. SO2 was collected on K2CO3/glycerol-impregnated filters and analyzed by ion chromatography. In blind tests, both techniques produced excellent agreement with National Institutes of Standards and Technology (NIST) standards. For field measurements, the DMS technique produced excellent correlation with the mean of the six different techniques intercompared. For SO2, the five techniques intercompared were rather poorly correlated, but correlations between the three techniques which passed NIST standards tests were somewhat better. Our SO2 filter measurements exhibited rather large uncertainties due to higher than normal variabiltiy of the filter blanks, which we believe was caused by extended storage in the field. In measurements conducted off the coast of Natal, Brazil, a diurnal afternoon minimum in DMS concentrations accompanied by a corresponding maximum in SO2 concentrations was observed. However, due to rather large uncertainties in the SO2 measurements, any conclusions about the SO2 trend must by considered tentative.

Ferek, Ronald J.↗
NASA NTRS1992

Mt. Pinatubo SO2 Column Measurements From Mauna Loa

Absorption features of the nu(sub 1) band of SO2 have been identified in high resolution infrared solar absorption spectra recorded from Mauna Loa, Hawaii, on July 9 and 12, 1991, shortly after the arrival of the first eruption plume from the Mt. Pinatubo volcano in the Phillipines. A total SO2 vertical column amount of (5.1 +/- 0.5) x 10(exp 16) molecules/sq cm on July 9 has been retrieved based on nonlinear least- squares spectral fittings of 9 selected SO2 absorption features with an updated set of SO2 spectral parameters. A SO2 total column upper limit of 0.9 x 10(esp 16) molecules/sq cm deduced from measurements on September 20-24, 1991, is consistent with the dispersion of the SO2 cloud and the rapid conversion of the SO2 vapor into volcanic aerosol particles.

Goldman, A.↗
NASA NTRS2008

Special Polymer/Carbon Composite Films for Detecting SO2

A family of polymer/carbon films has been developed for use as sensory films in electronic noses for detecting SO2 gas at concentrations as low as 1 part per million (ppm). Most previously reported SO2 sensors cannot detect SO2 at concentrations below tens of ppm; only a few can detect SO2 at 1 ppm. Most of the sensory materials used in those sensors (especially inorganic ones that include solid oxide electrolytes, metal oxides, and cadmium sulfide) must be used under relatively harsh conditions that include operation and regeneration at temperatures greater than 100 C. In contrast, the present films can be used to detect 1 ppm of SO2 at typical opening temperatures between 28 and 32 C and can be regenerated at temperatures between 36 and 40 C. The basic concept of making sensing films from polymer/carbon composites is not new. The novelty of the present family of polymer/carbon composites lies in formulating the polymer components of these composites specifically to optimize their properties for detecting SO2. First-principles quantum-mechanical calculations of the energies of binding of SO2 molecules to various polymer functionalities are used as a guide for selecting polymers and understanding the role of polymer functionalities in sensing. The polymer used in the polymer-carbon composite is a copolymer of styrene derivative units with vinyl pyridine or substituted vinyl pyridine derivative units. To make a substituted vinyl pyridine for use in synthesizing such a polymer, poly(2-vinyl pyridine) that has been dissolved in methanol is reacted with 3-chloropropylamine that has been dissolved in a solution of methanol. The methanol is then removed to obtain the copolymer. Later, the copolymer can be dissolved in an appropriate solvent with a suspension of carbon black to obtain a mixture that can be cast and then dried to obtain a sensory film.

Homer, Margie↗
NASA NTRS2008

Validation of SO2 Retrievals from the Ozone Monitoring Instrument over NE China

The Dutch-Finnish Ozone Monitoring Instrument (OMI) launched on the NASA Aura satellite in July 2004 offers unprecedented spatial resolution, coupled with contiguous daily global coverage, for space-based UV measurements of sulfur dioxide (SO2). We present a first validation of the OMI SO2 data with in situ aircraft measurements in NE China in April 2005. The study demonstrates that OMI can distinguish between background SO2 conditions and heavy pollution on a daily basis. The noise (expressed as the standard deviation,sigma) is approximately 1.5 DU (Dobson units; 1 DU = 2.69 10 (exp 16) molecules/cm (exp 2)) for instantaneous field of view boundary layer (PBL) SO2 data. Temporal and spatial averaging can reduce the noise to sigma approximetly 0.3 DU over a remote region of the South Pacific; the long-term average over this remote location was within 0.1 DU of zero. Under polluted conditions collection 2 OMI data are higher than aircraft measurements by a factor of two. Improved calibrations of the radiance and irradiance data (collection 3) result in better agreement with aircraft measurements on polluted days. The air mass corrected collection 3 data still show positive bias and sensitivity to UV absorbing aerosols. The difference between the in situ data and the OMI SO2 measurements within 30 km of the aircraft profiles was about 1 DU, equivalent to approximately 5 ppb from 0 to 3000 m altitude. Quantifying the SO2 and aerosol profiles and spectral dependence of aerosol absorption between 310 and 330 nm are critical for an accurate estimate of SO2 from satellite UV measurements.

Krotkov, Nickolay A.↗
NASA NTRS2017

A Decade of Global Volcanic SO2 Emissions Measured from Space

The global flux of sulfur dioxide (SO2) emitted by passive volcanic degassing is a key parameter that constrains the fluxes of other volcanic gases (including carbon dioxide, CO2) and toxic trace metals (e.g., mercury). It is also a required input for atmospheric chemistry and climate models, since it impacts the tropospheric burden of sulfate aerosol, a major climate-forcing species. Despite its significance, an inventory of passive volcanic degassing is very difficult to produce, due largely to the patchy spatial and temporal coverage of ground-based SO2 measurements. We report here the first volcanic SO2 emissions inventory derived from global, coincident satellite measurements, made by the Ozone Monitoring Instrument (OMI) on NASA's Aura satellite in 2005-2015. The OMI measurements permit estimation of SO2 emissions from over 90 volcanoes, including new constraints on fluxes from Indonesia, Papua New Guinea, the Aleutian Islands, the Kuril Islands and Kamchatka. On average over the past decade, the volcanic SO2 sources consistently detected from space have discharged a total of approximately 63 kt/day SO2 during passive degassing, or approximately 23 +/- 2 Tg/yr. We find that approximately 30% of the sources show significant decadal trends in SO2 emissions, with positive trends observed at multiple volcanoes in some regions including Vanuatu, southern Japan, Peru and Chile.

Carn, S. A.↗
NASA NTRS2021

Tracking aerosols and SO2 clouds from the Raikoke eruption: 3D view from satellite observations

The 21 June 2019 eruption of the Raikoke volcano (Kuril Islands, Russia; 48° N, 153° E) produced significant amounts of volcanic aerosols (sulfate and ash) and sulfur dioxide (SO2) gas that penetrated into the lower stratosphere. The dispersed SO2 and sulfate aerosols in the stratosphere were still detectable by multiple satellite sensors for many months after the eruption. For this study of SO2 and aerosol clouds we use data obtained from two of the Ozone Mapping and Profiler Suite sensors on the Suomi National Polar-orbiting Partnership satellite: total column SO2 from the Nadir Mapper and aerosol extinction profiles from the Limb Profiler as well as other satellite data sets. We evaluated the limb viewing geometry effect (the “arch effect”) in the retrieval of the LP standard aerosol extinction product at 674 nm. It was shown that the amount of SO2 decreases with a characteristic period of 8–18 d and the peak of stratospheric aerosol optical depth recorded at a wavelength of 674 nm lags the initial peak of SO2 mass by 1.5 months. Using satellite observations and a trajectory model, we examined the dynamics of an unusual atmospheric feature that was observed, a stratospheric coherent circular cloud of SO2 and aerosol from 18 July to 22 September 2019.

Eruption of the Raikoke volcano↗
NASA NTRS2013

Application of OMI, SCIAMACHY and GOME-2 Satellite SO2 Retrievals for Detection of Large Emission Sources

Retrievals of sulfur dioxide (SO2) from space-based spectrometers are in a relatively early stage of development. Factors such as interference between ozone and SO2 in the retrieval algorithms often lead to errors in the retrieved values. Measurements from the Ozone Monitoring Instrument (OMI), Scanning Imaging Absorption Spectrometer for Atmospheric Chartography (SCIAMACHY), and Global Ozone Monitoring Experiment-2 (GOME-2) satellite sensors, averaged over a period of several years, were used to identify locations with elevated SO2 values and estimate their emission levels. About 30 such locations, detectable by all three sensors and linked to volcanic and anthropogenic sources, were found after applying low and high spatial frequency filtration designed to reduce noise and bias and to enhance weak signals to SO2 data from each instrument. Quantitatively, the mean amount of SO2 in the vicinity of the sources, estimated from the three instruments, is in general agreement. However, its better spatial resolution makes it possible for OMI to detect smaller sources and with additional detail as compared to the other two instruments. Over some regions of China, SCIAMACHY and GOME-2 data show mean SO2 values that are almost 1.5 times higher than those from OMI, but the suggested spatial filtration technique largely reconciles these differences.

SO2 retrievals↗
NASA NTRS2018

A New Global Anthropogenic SO2 Emission Inventory for the Last Decade: A Mosaic of Satellite-Derived and Bottom-Up Emissions

Sulfur dioxide (SO2) measurements from the Ozone Monitoring Instrument (OMI) satellite sensor have been used to detect emissions from large point sources. Emissions from over 400 sources have been quantified individually based on OMI observations, accounting for about a half of total reported anthropogenic SO2 emissions. Here we report a newly developed emission inventory, OMI-HTAP, by combining these OMI-based emission estimates and the conventional bottom-up inventory, HTAP, for smaller sources that OMI is not able to detect. OMI-HTAP includes emissions from OMI-detected sources that are not captured in previous leading bottom-up inventories, enabling more accurate emission estimates for regions with such missing sources. In addition, our approach offers the possibility of rapid updates to emissions from large point sources that can be detected by satellites. Our methodology applied to OMI-HTAP can also be used to merge improved satellite-derived estimates with other multi-year bottom-up inventories, which may further improve the accuracy of the emission trends. OMI-HTAP SO2 emissions estimates for Persian Gulf, Mexico, and Russia are 59%, 65%, and 56% larger than HTAP estimates, respectively, in year 2010. We have evaluated the OMI-HTAP inventory by performing simulations with the Goddard Earth Observing System version 5 (GEOS-5) model. The GEOS-5 simulated SO2 concentrations driven by both HTAP and OMI-HTAP were compared against in situ measurements. We focus for the validation on year 2010 for which HTAP is most valid and for which a relatively large number of in situ measurements are available. Results show that the OMI-HTAP inventory improves the agreement between the model and observations, in particular over the US, with the normalized mean bias decreasing from 0.41 (HTAP) to -0.03 (OMI-HTAP) for year 2010. Simulations with the OMI-HTAP inventory capture the worldwide major trends of large anthropogenic SO2 emissions that are observed with OMI. Correlation coefficients of the observed and modelled surface SO2 in 2014 increase from 0.16 (HTAP) to 0.59 (OMI-HTAP) and the normalized mean bias dropped from 0.29 (HTAP) to 0.05 (OMI-HTAP), when we updated 2010 HTAP emissions with 2014 OMI-HTAP emissions in the model.

Sulfur dioxide (SO2)↗
NASA NTRS1979

Oxidation of CS2 and COS - sources for atmospheric SO2

The oxidation of COS and CS2 by reaction with hydroxyl radicals is investigated as a possible source of atmospheric SO2 in remote marine regions. Calculations of the vertical profiles of SO2 were performed based on a one-dimensional photochemical model of the formation and destruction of SO2 by various processes for observed O3, CO, CH4 and H2O profiles at 15 deg S. Variations in the rate of SO2 destruction, the chosen deposition velocity and the loss due to aerosols are shown to lead to similar SO2 profiles, which indicate higher mixing ratios at high altitude, while the oxidation of dimethyl sulfide or hydrogen sulfide can not account for the profiles observed. Possible diffuse sources of CS2 and COS are indicated, and it is concluded that the oxidation of COS and possibly CS2 may provide an explanation for the existence of a uniform background level of SO2.

Logan, J. A.↗
NASA NTRS1987

SO2 on Io: A thermodynamic perspective

The presence of condensed SO2 on Io mandates a finite abundance of SO2 vapor which must be present, regardless of plume activity. The absorption of SO2 was measured on particulate sulfur and the equilibrium between absorbed SO2, SO2 vapor, and SO2 ice examined, based upon measurements and simple thermodynamic considerations.

Zent, Aaron P.↗
NASA NTRS1991

SO2-rich equatorial basins and epeirogeny of Io

Comparison of Io's large scale topography with an SO2 abundance map shows that SO2 is concentrated in equatorial topographic basins. In these basins, about 30 pct. of the surface is covered by SO2 at all elevations above the mean triaxial figure, and SO2 coverage increases with decreasing elevation to as much as 56 pct. at elevations below -1.5 km. The correlation is not good from long 240 to 360 degs where bright areas are covered by red, Pele type plume fallout, and in the polar regions where the topography is poorly known. The histogram of SO2 abundance binned by elevation appears bimodal, with a secondary concentration of SO2 at high elevations, but it is not certain that this is significant. Additional observations suggest that the basins have relatively little higher frequency topographic relief. The distribution of active plumes and hotspots show no obvious correlation with the topography. However, the Pele type plume all erupted from regions higher than the mean figure, and five of the eight Prometheus type plumes are more energetic and are associated with high temperature hotspots, whereas Prometheus type plumes are long lived and require large volatile reservoirs.

Mcewen, Alfred S.↗
NASA NTRS2013

First Observations of SO2 from the Satellite Suomi NPP OMPS: Widespread Air Pollution Events Over China

Severe smog episodes over China in January 2013 received worldwide attention. This air pollution was distinguished by heavy loadings of fine particulate matter and SO2. To characterize these episodes, we employed the Ozone Mapping and Profiler Suite, Nadir Mapper (OMPS NM), an ultraviolet (UV) spectrometer flying on the Suomi National Polar-orbiting Partnership (SNPP) spacecraft since October 2011. We developed an advanced algorithm to quantify SO2 in the lower troposphere and achieved high-quality retrievals from OMPS NM, which are characterized by high precision, approx. 0.2 Dobson Units (DU; 1 DU = 2.69 x 10(exp 16) molecules/sq cm) for instantaneous field of view SO2 data and low biases (within +/-0.2 DU). Here we report SO2 retrievals and UV aerosol index data for these pollution events. The SO2 columns and the areas covered by high pollutant concentrations are quantified; the results reveal for the first time the full extent (an area of approx. 10(exp 6) sq km containing up to 60 kt of SO2) of these episodes.

Sulfur Dioxide↗
NASA NTRS2016

Evaluation of Modeled Vertical Distribution of Atmospheric SO2 and Sulfate in UTLS

We evaluated the vertical profiles of both SO2 and sulfate in the AEROCOM (Aerosol Model Intercomparison) Phase II participating models. SO2 and sulfate show significant concentration gradient in both horizontal and vertical directions. Both online and offline aerosol transport models show large difference in the vertical distribution of sulfur species from surface all the way up to lower stratosphere. Comparison with available aircraft measurements suggests models agree with observations well when SO2 concentration is high. For the volcanic plumes, the injection height and magnitude determines initial SO2 plume distribution and following transport pattern. At high altitude, where the background concentration of SO2 is often below the detection limit of the current aircraft instruments and satellite retrievals, modeled SO2 and sulfate concentration, lifetime, and budget, as well as their uncertainties can be difficult to be accurately quantified.

volcanic plumes↗
NASA NTRS2019

Ceramic Industry at Morbi as a Large Source of SO2 Emissions in India

Observations from the Ozone Monitoring Instrument (OMI), onboard the NASA's Earth Observing System (EOS) Aura satellite, reveal a large SO2 "hotspot" over Morbi, Gujarat, India, while the available emissions inventories do not report any major sources in this region. There are no industries that are typically associated with the elevated SO2 such as large power plants, smelters, or oil refineries in the Morbi region. Our analysis shows that the elevated SO2 source is attributed to the ceramic industries in an area of ~7 × 7 km2 near the city. OMI-estimated SO2 emissions from the Morbi ceramic industries have been near or above 100 kt y1 since 2009, which are similar to emission levels from larger Indian oil refineries (such as Essar and Jamnagar) and power stations (such as Mundra Thermal Power Station and Ultra Mega Power Plant) located in Gujarat, India. According to OMI measurements, the SO2 emissions from the Morbi ceramic industries are presently five times higher than they were in 2005. This study demonstrates that in the absence of any other information about SO2 emissions from the ceramic industry, these satellite-based estimates can fill the gap in emission inventories in a timely fashion.

S K Kharol↗
NASA NTRS2015

Using Satellite Observations to Evaluate the AeroCOM Volcanic Emissions Inventory and the Dispersal of Volcanic SO2 Clouds in MERRA

Simulation of volcanic emissions in climate models requires information that describes the eruption of the emissions into the atmosphere. While the total amount of gases and aerosols released from a volcanic eruption can be readily estimated from satellite observations, information about the source parameters, like injection altitude, eruption time and duration, is often not directly known. The AeroCOM volcanic emissions inventory provides estimates of eruption source parameters and has been used to initialize volcanic emissions in reanalysis projects, like MERRA. The AeroCOM volcanic emission inventory provides an eruptions daily SO2 flux and plume top altitude, yet an eruption can be very short lived, lasting only a few hours, and emit clouds at multiple altitudes. Case studies comparing the satellite observed dispersal of volcanic SO2 clouds to simulations in MERRA have shown mixed results. Some cases show good agreement with observations Okmok (2008), while for other eruptions the observed initial SO2 mass is half of that in the simulations, Sierra Negra (2005). In other cases, the initial SO2 amount agrees with the observations but shows very different dispersal rates, Soufriere Hills (2006). In the aviation hazards community, deriving accurate source terms is crucial for monitoring and short-term forecasting (24-h) of volcanic clouds. Back trajectory methods have been developed which use satellite observations and transport models to estimate the injection altitude, eruption time, and eruption duration of observed volcanic clouds. These methods can provide eruption timing estimates on a 2-hour temporal resolution and estimate the altitude and depth of a volcanic cloud. To better understand the differences between MERRA simulations and volcanic SO2 observations, back trajectory methods are used to estimate the source term parameters for a few volcanic eruptions and compared to their corresponding entry in the AeroCOM volcanic emission inventory. The nature of these mixed results is discussed with respect to the source term estimates.

OMI SO2↗
NASA NTRS2016

A Global Catalogue of Large SO2 Sources and Emissions Derived from the Ozone Monitoring Instrument

Sulfur dioxide (SO2) measurements from the Ozone Monitoring Instrument (OMI) satellite sensor processed with the new principal component analysis (PCA) algorithm were used to detect large point emission sources or clusters of sources. The total of 491 continuously emitting point sources releasing from about 30 kt yr(exp -1) to more than 4000 kt yr(exp -1) of SO2 per year have been identified and grouped by country and by primary source origin: volcanoes (76 sources); power plants (297); smelters (53); and sources related to the oil and gas industry (65). The sources were identified using different methods, including through OMI measurements themselves applied to a new emission detection algorithm, and their evolution during the 2005- 2014 period was traced by estimating annual emissions from each source. For volcanic sources, the study focused on continuous degassing, and emissions from explosive eruptions were excluded. Emissions from degassing volcanic sources were measured, many for the first time, and collectively they account for about 30% of total SO2 emissions estimated from OMI measurements, but that fraction has increased in recent years given that cumulative global emissions from power plants and smelters are declining while emissions from oil and gas industry remained nearly constant. Anthropogenic emissions from the USA declined by 80% over the 2005-2014 period as did emissions from western and central Europe, whereas emissions from India nearly doubled, and emissions from other large SO2-emitting regions (South Africa, Russia, Mexico, and the Middle East) remained fairly constant. In total, OMI-based estimates account for about a half of total reported anthropogenic SO2 emissions; the remaining half is likely related to sources emitting less than 30 kt yr(exp -1) and not detected by OMI.

Emissions↗