Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sliding mass”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Deep Learning on Multimodal Chemical and Whole Slide Imaging Data for Predicting Prostate Cancer Directly from Tissue Images

Prostate cancer is one of the most common cancers globally and is the second most common cancer in the male population in the US. Here we develop a study based on correlating the hematoxylin and eosin (H&E)-stained biopsy data with MALDI mass-spectrometric imaging data of the corresponding tissue to determine the cancerous regions and their unique chemical signatures and variations of the predicted regions with original pathological annotations. We obtain features from high-resolution optical micrographs of whole slide H&E stained data through deep learning and spatially register them with mass spectrometry imaging (MSI) data to correlate the chemical signature with the tissue anatomy of the data. We then use the learned correlation to predict prostate cancer from observed H&E images using trained coregistered MSI data. This multimodal approach can predict cancerous regions with ~80% accuracy, which indicates a correlation between optical H&E features and chemical information found in MSI. Further, we show that such paired multimodal data can be used for training feature extraction networks on H&E data which bypasses the need to acquire expensive MSI data and eliminates the need for manual annotation saving valuable time. Two chemical biomarkers were also found to be predicting the ground truth cancerous regions. This study shows promise in generating improved patient treatment trajectories by predicting prostate cancer directly from readily available H&E-stained biopsy images aided by coregistered MSI data.

60 APPLIED LIFE SCIENCES↗

Validating Mixtures of 233 U, 235 U, and 239 Pu for the Sum-of-Fractions Method [Slides]

A joint effort by PNNL and ORNL examined mixtures of 233 U, 235 U, and 239 Pu to determine subcritical mass limits based on similarities to critical benchmark experiments through the Sum-of-Fractions method. Results of the validation efforts by ORNL were used to determine areas of applicability based on EALF and moderator/reflector type. TSUNAMI-1D, TSUNAMI-IP, and VADER sequences used for generating sensitivities, similarity assessments, and statistical testing. Validation efforts provided here using the Sum-of-Fractions method results in k eff values below established calculational margins and provides additional flexibility to limits provided in ANSI/ANS-8.15.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Chlorine Worth Study in Support of PF-4 Operations [Slides]

The primary concern of this study is if experiments can be designed/conducted to provide technical justification to NCS in order to increase mass limits. This goal is in direct support of 30 pits per year mission, one of the top priorities for NNSA. The accelerated timeline is as follows: Initial tasking, June 2020; preliminary design completion (CED-1 equivalent), November 2020; final design completion (CED-2 equivalent), March 2021; part receipt and inspection completion (CED-3a equivalent), October 2021; experiment execution (CED-3b equivalent), December 2021; experiment documentation write-up completion (start CED-4a equivalent), January 2022; and ICSBEP target (CED-4a equivalent), Fall 2022.

2019 ARCHIMEDES LDRD project↗

Advanced Fuel Cycle Cost Basis Report: Supporting Document 7 Presentation: Du and RU Disposal Costs [Slides]

Worldwide DU and RU in various chemical forms are some of the largest legacy products of the nuclear industry (defense & power) in both mass and volume. Chemical forms include U metal or alloy, UF6, UO2, UO3, U3O8, and UF4. Most of this material is now in above ground storage. Due to chemical stability and low water solubility oxides are the preferred form for safe storage and ultimate disposal. Long term U disposal in large amounts presents more of a potential radioactivity problem than its conversion and temporary storage. Now a near term problem with freshly-mined uranium ore, radon emanation will eventually be a long-term problem for both DU and RU dispositioned in large quantities at a specific location.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A Gaseous Argon-Based Near Detector for DUNE [Slides]

DUNE is the Deep Underground Neutrino Experiment. It is a comprehensive physics program whose focus is to search for the leptonic CP violation, determine mass ordering, precise measurements of neutrino mixing parameters, BSM searches, baryon number violation, and supernova neutrino observation. This presentation focus is on the argon-based near detector complex at DUNE.

43 PARTICLE ACCELERATORS↗

Semiclassical theory of bipolaronic superconductivity in a bond-modulated electron-phonon model

We analyze the transition temperature T c of bipolaronic superconductivity in a bond Su-Schrieffer-Heeger (bond-SSH) model—also known as a bond Peierls model—where the electron hoppings are modulated by bond phonons. Using a semiclassical instanton approximation justifiable in the adiabatic limit of slow phonons, we find that the bipolaron mass is only weakly enhanced, in contrast to the typical large mass enhancement found in standard (Holstein) electron-phonon models. Specifically, in the strong coupling limit, the bipolarons can freely slide within a degenerate manifold rather than become self-trapped. A gas of these bipolarons can undergo a superfluid transition at a critical temperature for which we obtain an upper bound. We find that this bound is exponentially larger than that in the Holstein model. In conclusion, our study provides an analytical understanding of the mechanism behind the high-T c bipolaronic superconductivity numerically observed in [Phys. Rev. X 13, 011010 (2023)].

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Examining Sources of Uncertainty in Coincidence Neutron Measurements of Spent Research Reactor Fuel [Slides]

The nature of spent fuel introduces many sources of uncertainty into measurement results. Quantification of those uncertainties is essential for understanding the relationship between NDA measurements and fissile mass. Modeling is a useful tool for identifying those characteristics that contribute significantly to measurement uncertainties and understanding how to account for those uncertainties when performing coincident neutron measurements.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

An Integrated Approach to Precision Neutron Measurements in a Dynamic Environment [Slides]

Any quantity of special nuclear material must be accurately quantified for health, safety, and security concerns. High-Level Neutron Coincidence Counters (HLNCCs) are detectors used for assaying the mass of special nuclear material. HLNCCs record a neutron count rate over some period of time which is compared to a calibration curve to determine the quantity of special nuclear material present within the detector.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Chlorine Worth Study in Support of PF-4 Operations [Slides]

Aqueous Chloride Operations at PF-4 are important because they recover Pu from other processes, reduce waste sent to WIPP, and increase throughput for Am production. Aqueous Chloride Operations have very conservative mass limits (~520 grams Pu) and significant amounts of Chlorine but calculations not crediting Cl-35 neutron absorption accounting for Cl-35 absorption leads to higher mass limits. Can experiments be designed/conducted to provide technical justification to NCS in order to increase mass limits?

2019 ARCHIMEDES LDRD project↗

Effect of grain dissolution on sloping ground

The static and dynamic stability of natural or constructed slopes can be affected by dissolution or dissolution-like phenomena. Their underlying mechanisms, however, remain unclear. New experimental results and discrete element simulations provide particle-level and macroscale information on the consequences of mineral dissolution on slope behavior. At the microscale, load-carrying grain arches develop around dissolving particles, the porosity increases, and contact force chains evolve to form a honeycomb topology. At the macroscale, while vertical settlements are the prevailing deformation pattern, lateral granular movements that create mass wasting are prominent in sloping ground, even under the quasi-static granular loss. Horizontal grain displacement is maximum at the surface and decreases linearly with the distance from the slope surface to become zero at the bottom boundaries, much like vertical granular displacement along the depth. Sediments with smaller friction angles and steeper slopes experience greater displacement, both vertically and horizontally. Slopes become flatter after dissolution, with the reduction in slope angle directly related to the loss in ground elevation, ΔH/H o . Yet, because of the porous fabric that results from dissolution, vertical shortening is less than the upper bound, estimated from the loss in the solid mass fraction, ΔH/H o ≈SF. Under water-saturated conditions, the post-dissolution fabric may lead to sudden undrained shear and slope slide.

42 ENGINEERING↗

SPH modeling of biomass granular flow: Theoretical implementation and experimental validation

The commercialization of biomass-derived energy is impeded by flowability challenges arising from the feeding and handling of granular biomass materials in full-scale biorefineries. To overcome these obstacles, a robust and accurate model to simulate the flow of granular biomass is indispensable. However, conventional mesh-based numerical codes are limited by inherent mesh distortion in simulating large deformation that commonly occurs in granular biomass handling. Here, in this study, we propose a graphics processing unit (GPU)-accelerated meshless Smoothed Particle Hydrodynamics (SPH) code to model the flow of granular biomass materials. A modified void ratio-based mass conversation, a hybrid particle-to-particle/surface frictional boundary treatment, and a hypoplastic constitutive model are implemented. Four numerical examples, an elastic block sliding on inclined planes, sand column collapse, Angle of Repose, and axial compression tests for pine chips, were simulated using the developed SPH code. The results demonstrate good agreement between numerical predictions and analytical and experimental data for all four examples, validating the SPH code and increasing confidence that it can be applied to simulate more complex granular biomass handling processes, such as hopper feeding or auger conveyance.

09 BIOMASS FUELS↗

Next-Generation Simulations of the Remarkable Deaths Of Massive Stars [Slides]

3D models of stellar convection are necessary for accurate description of state of model near collapse. Convection is occurring at many scales with the large dominant mode near collapse. 3D instabilities can affect flow properties and mass entrainment. Mach number profiles show favorable conditions for explosion. 3D rotating progenitor models are ALSO necessary. The redistribution of AM diverges from the MESA model, with implications for remnant. There is turbulent transport of AM in convective shell regions. Multi-D models can provide input for successful CCSN models. Larger non-radial kinetic energy exists when using multi-D progenitor input. The 3D CCSN model showed prompt convection and asymmetric shock runaway. Explosion properties suggest robust impact on multi-messenger signals.

79 ASTRONOMY AND ASTROPHYSICS↗

Public Town Hall (2/27/2023) [Slides]

With geopolitical tensions high around the globe (Ukraine, Russia, China…), our mission is more important now than at any point since the Cold War – Our people help ensure the reliability of the deterrent, detect weapons of mass destruction, and advance the frontiers of science, engineering and computing.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗

Fission Product Yields of 233 U and 239 Pu by Neutron-Induced Fission at Neutron Energies from 0.18-140 MeV [Slides]

Nuclear fission is an important process with applications in astrophysics, nuclear reactors, and stockpile stewardship. Despite having been discovered over 80 years ago, fission is not fully described by a predictive model. This study will show fission product mass yields and total kinetic energies (TKE) across a large range of incident neutron energies for future refinement of fission models. 233U(n,f) data is used to verify features and structures on a previous experiment and compared against fission models. 239Pu(n,f) data will be analyzed to show new data at higher neutron energies using techniques to handle fission in the presence of alphas. 252Cf(sf) data will be used for calibration and benchmarking with a thin-backed target.

07 ISOTOPE AND RADIATION SOURCES↗

EXPERIMENTAL INVESTIGATION OF IMPACT AND ABRASION EROSIONS AT LOW VELOCITIES AND COMPARISON TO CFD SIMULATIONS

Wear and erosion damage of materials due to interaction of the surface with solid particles is a major issue in various industries. This phenomenon is common in mining, and oil and gas production, causing damages worth millions of dollars annually. Erosion is becoming a critical issue in renewable technologies as well such as concentrated solar thermal power (CSP) systems. In some CSP systems, solid particles can be used to absorb solar energy and enhance the heat storage. However, these particles may cause significant amount of wear to system components while falling down the power tower at high temperatures. This damage can be costly, and therefore, investigating solid particle erosion in CSP systems is of utmost importance. In collaboration with Sandia National Laboratories, the erosion durability of particle-based Generation 3 (GEN3) CSP system are being investigated both experimentally and numerically. In order to develop models to predict the life time of such systems, erosion under low temperature and low particle impact velocity conditions are investigated. Impact erosion and abrasion erosion experiments are conducted for low velocity and low temperature conditions for various candidate particles and containment materials. The impact erosion testing is conducted for three different containment material including Stainless Steel 316, special refractory material, and Inconel 740H with CARBOBEAD HSP 40/70 ceramic particles and UNIWEST 430 silica quartz erodent particles. All this data will enable us to better model the erosion behavior of these materials and provides a data base to investigate erosion at high temperatures experienced in CSP systems. At low temperatures and low velocities the softer refractory material exhibited greater erosion by an order-of-magnitude when compared to the harder Inconel 740H and Stainless Steel 316 materials. The overall erosion ratio for all the candidate materials was of the order of 10 -7 kg/kg. We also investigated wear in containment materials from sliding of particles over the surfaces at very low angles, also referred to as abrasion. For the velocities expected in a typical 1MW CSP plant, visible surface wear was noted, but the overall mass loss per unit surface area was found to be dependent on the hardness of the containment material tested. In this manuscript, we also present Computational Fluid Dynamics (CFD) simulations and erosion prediction of low velocity impact erosion. These results are compared with the experimental data to evaluate the ability of available erosion models for predicting erosion under these conditions.

14 SOLAR ENERGY↗

Absolute Efficiency Characterization of Neutron Detectors within Radioisotope Identification Devices [Slides]

Some Radioisotope Identification Devices (RIIDs) have a low efficiency neutron detector that can provide a neutron singles counting rate along with the primary gamma spectra that can be used to identify a radioisotope. When we know absolute efficiency, other characteristics of a radioisotope can be estimated such as mass or source strength when accompanied by the identity of the isotope and other observable variables. This study focuses on characterizing and comparing the absolute neutron efficiencies of some commonly used RIIDs: the ORTEC Detective X, ORTEC RADEAGLET-R, and FLIR IDentifinder 2.

Nuclear Criticality Safety Program (NCSP)↗

Commonly Overlooked Material Attractiveness Issues [Slides]

SG-Pu, WG-Pu, FG-Pu, RG-Pu, HEU, and Np should not be ignored in safeguards or security discussions: Nation states prefer SG-Pu and WG-Pu for missile delivery. Terrorists and some nation states will prefer FG-Pu and RG-Pu to minimize the mass that must be stolen/diverted and to minimize the risk of detection. Terrorists and some nation states will prefer HEU to eliminate the need for testing. A nation state with reprocessing capabilities might prefer 237 Np because the IAEA doesn’t require it to be safeguarded. Terrorists might prefer 237 Np if the nation state does not provide adequate safeguards and security for it.

36 MATERIALS SCIENCE↗