Colloidal Assembly and Separation under UV-Induced Convective Flows and on Inclines
Not provided.
Chemistry↗
SEARCH · Engineering Papers
Results for “silver nanoparticle”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Unveiling 3D Morphology of Multiscale Micro-Nanosilver Sintering for Advanced Electronics Manufacturing by Ptychographic X-ray Nanotomography
The sintering processing–structure–property relationship of a multiscale silver materials is investigated: microparticles with nanofeatures, particularly on their three-dimensional (3D) morphology. The target application is to replace conventional lead-based solders in advanced electronic manufacturing. Unlike lead-based solders, silver powders are suited to satisfy increasingly demanding mechanical, electrical, and thermal requirements, meanwhile being free of health effect. Sintering the material at a low temperature and without applied pressure are desirable conditions, which results in a preferred use of silver nanoparticles, as nanofeatures have higher driving force to sinter with the decrease in particle size. However, nanosized powders present potential health/environmental effects. To address the trade-off between the benefits and shortcomings of nano-versus microparticles, this work studies a novel multiscale silver paste, namely micron-sized powders with nanosized features. To get quantitative 3D visualization of micro- and nanoscale features, ptychographic X-ray computed nanotomography is applied. The correlations between conditions (thermal aging, pressure, and substrate metallization), mechanical properties, and morphological parameters are established. Finally, using novel 3D X-ray nanoimaging technique, it is demonstrated that one can design multiscale materials while balancing complex demands required in advanced electronics manufacturing and research directions in materials design and characterization.
36 MATERIALS SCIENCE↗
Highly Tunable Syngas Product Ratios Enabled by Novel Nanoscale Hybrid Electrolytes Designed for Combined CO 2 Capture and Electrochemical Conversion
Coupling renewable energy with the electrochemical conversion of CO 2 to chemicals and fuels has been proposed as a strategy to achieve a new circular carbon economy and help mitigate the effects of anthropogenic CO 2 emissions. Liquid-like Nanoparticle Organic Hybrid Materials (NOHMs) are composed of polymers tethered to nanoparticles and are previously explored as CO 2 capture materials and electrolyte additives. Here, in this study, two types of aqueous NOHM-based electrolytes are prepared to explore the effect of CO 2 binding energy (i.e., chemisorption versus physisorption) on CO 2 electroreduction over a silver nanoparticle catalyst for syngas production. Poly(ethylenimine) (PEI) and Jeffamine M2070 (HPE) are ionically tethered to SiO 2 nanoparticles to form the amine-containing NOHM-I-PEI and ether-containing NOHM-I-HPE, respectively. At less negative cathode potentials, PEI and NOHM-I-PEI-based electrolytes produce CO at higher rates than 0.1 molal. KHCO 3 due to favorable catalyst-electrolyte interactions. Whereas at more negative potentials, H 2 production is favored because of the carbamate electrochemical inactivity. Conversely, HPE and NOHM-I-HPE-based electrolytes display poor CO 2 reduction performance at less negative potentials. At more negative potentials, their performance approached that of 0.1 molal. KHCO 3 , highlighting how the polymer functional groups of NOHMs can be strategically selected to produce value-added products from CO 2 with highly tunable compositions.
36 MATERIALS SCIENCE↗
Extrapolating Contaminant Effects from Individuals to Populations: A Case Study on Nanoparticle Toxicity to Daphnia Fed Environmentally Relevant Food Levels
Ecological risk assessment (ERA) is charged with assessing the likelihood a chemical will have adverse environmental or ecological effects. When assessing the risk of a potential contaminant to biological organisms, ecologists are most concerned with the sustainability of populations of organisms, rather than protecting every individual. However, ERA most commonly relies on data on the effect of a potential contaminant on individuals because these experiments are more feasible than costly population-level exposures. In this work, we address the challenge of extrapolating these individual-level results to predict population-level effects. Previous per-capita population growth rate estimates calculated from individual-level exposures of Daphnia pulicaria to silver nanoparticles (AgNPs) at different food rations predict a critical daily food requirement for daphnid populations exposed to 200 μg/L AgNPs to avoid extinction. To test this, we exposed daphnid populations to the same AgNP concentration at three different food inputs, with the lowest ration close to the extinction threshold predicted from data on individuals. The two populations with the higher food inputs persisted, and the population with the lowest food input went extinct after 50 days but did persist through two generations. Further, we demonstrate that we can extrapolate between these levels of biological organization by parameterizing an individual-level biomass model with data on individuals’ response to AgNPs and using these parameters to predict the outcome for control and AgNP-exposed populations. Key to successful extrapolation is careful modeling of temporal changes in resource density, driven by both the experimental protocols and feedback from the consumer. The implication for ecotoxicology is that estimates of extinction thresholds based on studies of individuals may be reliable predictors of population outcomes, but only with careful treatment of resource dynamics.
54 ENVIRONMENTAL SCIENCES↗
Dual-atom Ag 2 /graphene catalyst for efficient electroreduction of CO 2 to CO
Electrochemical reduction of CO 2 into value-added carbon compounds offers a promising strategy to mitigate global warming, but present challenges for chemistry due to the poor selectivity and stability of electrocatalysts. In this work, we report a dual-atom Ag 2 /graphene catalyst featuring well-defined AgN 3 -AgN 3 active site for CO 2 electrochemical reduction. This dual-atom catalyst can drive CO 2 reduction reaction at a potential as high as -0.25 V, and exhibit excellent CO Faradic efficiency up to 93.4 % with a current density of 11.87 mA cm -2 at -0.7 V and long-term stability, far surpassing the single-atom Ag 1 /graphene and the traditional silver nanoparticle catalysts. Finally, DFT calculations reveal that the dual-atom Ag site lowers the barrier for the formation of *COOH by stabilizing the *CO 2 through the concomitant interactions with the C and an O atom of CO 2 , resulting in excellent catalytic performance.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Gaseous Iodine Sorbents: A Comparison between Ag-Loaded Aerogel and Xerogel Scaffolds
The general properties of aluminosilicate aerogels and xerogels with silver nanoparticles as sorbents for capturing iodine gas [I2(g)] were investigated. The structures, morphologies, compositions, and pore structures of aerogel and xerogel were compared using powder X-ray diffraction (PXRD), scanning electron microscopy, transmission electron microscopy, energy dispersive X-ray spectroscopy, as well as specific surface area (SSA) and pore size analyses. The as-made aerogels, xerogels, and heat-treated aerogels were impregnated with Ag by aqueous ion exchange using AgNO3 solutions, and PXRD patterns showed the presence of nanocrystalline Ag0 after Ag-impregnation. Iodine loadings of aerogels and xerogels were 0.33–0.41 g g-1. The Ag-impregnated aerogels without heat-treatment showed an 8 mass% higher iodine loading than Ag-impregnated xerogels and 3 mass% higher than heat-treated Ag-impregnated aerogels. All gels after iodine uptake showed the presence of AgI, indicating chemisorption of iodine to silver. The SSA values of the as-made gels were 419–598 m2 g-1 but decreased significantly to 34–120 m2 g-1 after Ag-impregnation and iodine uptake processes. Overall, changes in physical and chemical properties of aerogels and xerogels after iodine uptake were similar, and the difference in iodine loading capacities of the aerogels and xerogels was not significant while the synthesis process of xerogel is more practical because it does not require supercritical drying.
aerogel, xerogel, iodine capture↗
Predicting Deposition Rate and Closing the Loop on Aerosol Jet Printing with In‐Line Light Scattering Measurements
Aerosol jet printing is a compelling noncontact, digital manufacturing technology for flexible, hybrid, and conformal electronics, but batch‐to‐batch variability and process drift inhibit systematic study and translation to production environments. Emerging measurement techniques for the aerosol volume fraction, a key parameter governing deposition rate, have shown promise for real‐time response, including a recent demonstration of human‐in‐the‐loop control. By integrating improved light scattering measurements with custom software, a robust environment for real‐time monitoring is established and fully automated closed‐loop control over the deposition rate during printing is enabled. The physical basis for scattering measurements as a feedback source is examined and the quantitative insight this provides for ink development and fundamental process studies is highlighted. Three candidate process variables for closed‐loop control, namely the atomizer voltage, carrier gas flow rate, and print speed, are then evaluated. The atomizer voltage demonstrates the best extended duration validity because it addresses atomization variability directly, but carrier gas flow rate and print speed provide faster and more deterministic responses. This methodology is then demonstrated for electrical properties using a silver nanoparticle ink, maintaining 98% of printed patterns within 10% of the mean resistance value over 3 h of printing.
36 MATERIALS SCIENCE↗
Advanced Manufacturing of Printed Melt Wire Chips for Cheap, Compact Passive In-Pile Temperature Sensors
Melt wires are a passive sensor used to determine peak temperatures during a test. Traditional melt wires are commonly used in test reactor experiments such as in the Advanced Test Reactor (ATR). However, the conditions within a reactor present significant challenges towards test design due to space limitations and the harsh environment. For example, some test capsules have only a couple millimeters in diameter available for instrumentation, which is too small to accommodate a traditional melt wire package, and they are ultimately filled to capacity when they are immersed in molten metal. To enable instrumentation for space limited applications, peak temperature sensing capabilities paired with additive manufacturing options have been utilized to develop printed melt wires for peak irradiation temperature detection. Here, we report on the fabrication of miniaturized melt wire chips with a melting temperature ~960 °C with printed silver nanoparticle ink. This study will advance the development of unique temperature sensors capable of sensing user specified temperature ranges within the harsh environment of irradiation testing.
46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
Additively manufactured strain sensors for in-pile applications
Accurate, real-time monitoring of strain in fuel, cladding, and structural components of nuclear reactors is critical to better understand radiation induced phenomena during reactor tests and operations. The data provided is crucial to verify physics-based, multiscale modeling and simulation efforts, which aim to shorten the timeline for the development of new nuclear materials. Resistive strain gauges have limited performance during in-pile experiments due to the harsh operating conditions and limited physical space between fuel and cladding components. In this work, aerosol jet printing using silver nanoparticle inks was used to fabricate interdigitated electrode capacitive strain gauges on aluminum alloy 6061 tensile specimens. Here to simulate the temperatures of a traditional light water reactor, the capacitive strain gauges were tested with a mechanical test frame up to 300 °C and compared to commercially available bondable resistive strain gauges. The printed capacitive strain gauges exhibited a gauge factor of 1.0 and showed higher reproducibility and predictability of strain sensing performance than the resistive strain gauge. The results demonstrate the potential of aerosol jet printing to fabricate strain sensors with predictable performance and reduced invasiveness for high-temperature applications with confined spacing.
36 MATERIALS SCIENCE↗
The Prevalence of Anions at Plasmonic Nanojunctions: A Closer Look at P-Nitrothiophenol
We revisit the reductive coupling of p-nitrothiophenol (NTP) to form dimercaptoazobenzene (DMAB), herein monitored through gap-mode tip-enhanced Raman spectroscopy (TERS) and nano-imaging. We employ a plasmonic Au probe (100 nm diameter at its apex) illuminated with a 633 nm laser source (50 ?W/?m2 at the sample position) to image a NTP-coated faceted silver nanoparticle (~70 nm diameter). A detailed analysis of the recorded spectra reveals that anionic NTP species contribute to the recorded spectral images, in addition to the more thoroughly described DMAB product. Notably, the signatures of the anions are more pronounced than those of the DMAB product under our present experimental conditions. Our results thus demonstrate that anions and their spectral signatures must be considered in the analysis of plasmon-enhanced spectra and images.
Wang, Chih-Feng↗
Direct Observation of Hydroxyls Formed from Water and Oxygen on Ag(100)
The interaction of oxygen with silver is a key descriptor of the catalytic reactivity of silver nanoparticles which are ubiquitous in large-scale partial oxidation reactions like ethylene epoxidation. Despite Ag(100) being proposed as the most selective facet, it is less studied than (111) and (110) surfaces. Using scanning tunneling microscopy and synchrotron X-ray photoelectron spectroscopy, we report that, in addition to the well-known O adatoms formed from O 2 dissociation on Ag(100), hydroxyl groups (OH), at a binding energy of ∼ 531 eV, are also present. The O/OH ratio depends on exposure to water and surface temperature. These assignments are consistent with our density functional theory calculations, which indicate that the formation of two OH groups from an O atom and H 2 O molecule is exothermic. These results indicate that, in addition to O, OH is present even under ultrahigh vacuum conditions and therefore should be considered in proposed catalytic pathways.
36 MATERIALS SCIENCE↗
Strongly Coupled Exciton–Surface Lattice Resonances Engineer Long-Range Energy Propagation
Achieving propagation lengths in hybrid plasmonic systems beyond typical values of tens of micrometers is important for quantum plasmonics applications. Iin this paper, we report long-range optical energy propagation due to excitons in semiconductor quantum dots (SQDs) being strongly coupled to surface lattice resonance (SLRs) in silver nanoparticle arrays. Photoluminescence (PL) measurements provide evidence of an exciton-SLR (ESLR) mode extending at least 600 mu m from the excitation region. We also observe additional energy propagation with range well beyond the ESLR mode and with dependency on the coupling strength, g, between SQDs and SLR. Cavity quantum electrodynamics calculations capture the nature of the PL spectra for consistent g values, while coupled dipole calculations show a SQD number-dependent electric field decay profile consistent with the experimental spatial PL profile. Our results suggest an exciting direction wherein SLRs mediate long-range interactions between SQDs, having possible applications in optoelectronics, sensing, and quantum information science.
77 NANOSCIENCE AND NANOTECHNOLOGY↗
Tuning Hybrid exciton–Photon Fano Resonances in Two-Dimensional Organic–Inorganic Perovskite Thin Films
As easy-to-grow quantum wells with narrow excitonic features at room temperature, two-dimensional (2D) Ruddleson–Popper perovskites are promising for realizing novel nanophotonic devices based on exciton–photon interactions. Here, we demonstrate a distinct hybrid exciton–photon Fano resonance in (C 4 H 9 NH 3 ) 2 PbI 4 thin films prepared via spin coating. Using a classical coupled-oscillator model and finite-difference time-domain simulations, we link the Fano interference to the coupling of the exciton with the Rayleigh-like scattering of the film microstructure. Combining colloidal plasmonic cavities with the 2D perovskite films, we demonstrate tuning of the Fano resonance. In combination with silver nanoparticles, the exciton–photon Fano interference couples to the in-plane plasmonic modes with indications of Rabi splitting. By creating a nanoparticle on mirror geometry, we address the out-of-plane excitonic component, reaching an intermediate coupling regime. Furthermore, these structures suggest possible photonic targets for biomolecular self-assembly applications.
2D perovskites↗
Aerosol jet printed capacitive strain gauge for soft structural materials
Soft structural textiles, or softgoods, are used within the space industry for inflatable habitats, parachutes and decelerator systems. Evaluating the safety and structural integrity of these systems occurs through structural health monitoring systems (SHM), which integrate non-invasive/non-destructive testing methods to detect, diagnose, and locate damage. Strain/load monitoring of these systems is limited while utilizing traditional strain gauges as these gauges are typically stiff, operate at low temperatures, and fail when subjected to high strain that is a result of high loading classifying them as unsuitable for SHM of soft structural textiles. For this work, a capacitance based strain gauge (CSG) was fabricated via aerosol jet printing (AJP) using silver nanoparticle ink on a flexible polymer substrate. Printed strain gauges were then compared to a commercially available high elongation resistance-based strain gauge (HE-RSG) for their ability to monitor strained Kevlar straps having a 26.7?kN (6?klbf) load. Dynamic, static and cyclic loads were used to characterize both types of strain monitoring devices. Printed CSGs demonstrated superior performance for high elongation strain measurements when compared to commonly used HE-RSGs, and were observed to operate with a gauge factor of 5.2 when the electrode arrangement was perpendicular to the direction of strain.
36 MATERIALS SCIENCE↗
Data-driven exploration of silver nanoplate formation in multidimensional chemical design spaces
We present an autonomous data-driven framework that iteratively explores the experimental design space of silver nanoparticle synthesis to obtain control over the formation of a desired morphology and size.
37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
Development of an ultraprecise glue-free bimorph deformable mirror with a length of 460 mm
Lead zirconate titanate (PZT) bimorph mirrors are essential for performing multiple functions, such as beam shaping, wavefront correction, and dynamic focusing with adjustable beam sizes. They typically consist of a mirror substrate with PZT electrodes bonded to the substrate using a thin epoxy film. However, glue-bonded PZT mirrors exhibit low reproducibility in measurement results. One source of this variability is water absorption by the substrate’s epoxy adhesive during wet fabrication processes, such as elastic emission machining (EEM), which leads to swelling and deformation. Additionally, longer deformable bimorph mirrors require larger PZT electrodes, further complicating their design and fabrication, particularly during bonding and ultraprecise metrology. To address these challenges, silver nanoparticles were employed to bond PZT elements to the silicon (Si) mirror, eliminating the need for epoxy glue. Here, in this study, we developed an inorganic-glue-free PZT bimorph mirror with a length of 460 mm and 28 channels. The glue-free bonding method successfully ensured the high reproducibility of measurements after water immersion. This approach resulted in a shape error of only 0.41 nm root mean square after the figure correction process using an ultraprecise EEM process. Scanning acoustic tomography and basic response function tests confirmed the success of the bonding process, showing no critical voids. Furthermore, the shape changes induced by applying voltages to the PZT electrodes closely matched predictions obtained from simulations. These results demonstrate the reliability and precision of the proposed glue-free bonding technique, paving the way for improved performance of new PZT bimorph mirrors.
Ichii, Yoshio [SLAC National Accelerator Laborator↗
Laser-based Adhesion Strength Measurements for Advanced Manufactured Sensor Adhesion Characterization
As part of the advanced manufacturing (AM) focus of the Nuclear Energy Enabling Technologies (NEET) Advanced Sensors and Instrumentation (ASI) Program, new in-house capabilities to fabricate and test novel active and passive in-pile sensors are being developed at the Idaho National Laboratory (INL). These advanced-manufactured sensors, such as peak temperature monitors and strain gauges, must be miniaturized and be able to provide real-time feedback, all while withstanding the coupled extremes of temperature and radiation typically observed in the environment of a nuclear test reactor. Fabricating durable and robust in-pile sensors with high fidelity requires a fundamental understanding of the optimal process parameters required in the AM technique, as well as the effect of deviations from optimal process parameters on the sensor-substrate adhesion and the ultimate robustness of the sensor. This report presents the use of a laser-based, non-contact approach for characterizing the adhesion of sensors manufactured using aerosol jet printing (AJP) that comprise of silver nanoparticle inks deposited and sintered on austenitic stainless steel (SS) 316L substrates. The effect of substrate surface roughness, surface energy, ink sintering time and sintering temperature on the printed sensor topography and the sensor-substrate adhesion has been systematically investigated. The sensor-substrate interfacial adhesion strength was determined from the critical laser pulse energy required to ablate/ detach the printed sensor from the substrate. Measurements of the sensor topography using optical profilometry revealed that post-deposition sintering at 400°C for 60 minutes resulted in a reduced sensor thickness, while plasma treating the substrate prior to printing yielded sensors with uniform thickness profiles transverse to the print direction. Sintering temperature and time were found to be the dominant parameters that affected sensor-substrate adhesion, followed by substrate surface roughness. The laser-based and locally-destructive approach for adhesion strength measurements shows promise in overcoming the challenges and limitations of current standardized peel tests and can be developed into a post-fabrication process control protocol for evaluating the durability of AM printed sensors in a high throughput fashion. Future studies will investigate the use of laser-induced spallation techniques as well as non-destructive laser ultrasonic methods for sensor-substrate adhesion characterization on sensors manufactured using AJP and other AM techniques such as plasma jet printing (PJP).
42 ENGINEERING↗
Printed Microwave Connector
This paper describes the development of a printed, planar microwave connector operating from 1-7 GHz. The connector, which is based on a Grounded Coplanar Waveguide (GCPW) transmission line structure, is fabricated using 3D-printed thermoplastic material (PEEK) and conductive nanoparticle silver ink. Electromagnetic models were established to provide guidance on design tradeoffs and their impact on microwave performance. New mechanical designs were also developed to provide accurate alignment and robust connection of the two halves of the planar connector structure. Initial connector prototypes were fabricated to validate the new planar design using conventional double-sided copper laminates (Isola MT40). The designs were then implemented in an all-printed version of the connector. Electromagnetic models of the printed connectors were developed using the measured dielectric properties of printed PEEK. The insertion loss of the printed connectors was measured to be less than 1.7dB across the band.
Microwave Connector, printed electronics, additive↗