Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sharing experience”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Earth Science Project Office (ESPO) Field Experiences During ORACLES, ATom, KORUS and POSIDON

Very often, scientific field campaigns entail years of planning and incur substantial cost, especially if they involve the operation of large research aircraft in remote locations. Deploying and operating these aircrafts even for short periods of time poses challenges that, if not addressed properly, can have significant negative consequences and potentially jeopardize the success of a scientific campaign. Challenges vary from country to country and range from safety, health, and security risks to differences in cultural and social norms. Our presentation will focus on sharing experiences on the ESPO 2016 conducted field campaigns ORACLES, ATom, KORUS and POSIDON. We will focus on the best practices, lessons learned, international relations and coordination aspects of the country-specific experiences. This presentation will be part of the ICARE Conference (2nd International Conference on Airborne Research for the Environment (ICARE 2017) that will focus on "Developing the infrastructure to meet future scientific challenges". This unique conference and gathering of facility support experts will not only allow for dissemination and sharing of knowledge but also promote collaboration and networking among groups that support scientific research using airborne platforms around the globe.

Salazar, Vidal↗

PERFORMANCE ASSESSMENT ASSISTANCE ACTIVITIES IN THE DOE COMPLEX

The United States Department of Energy Office of Environmental Management (DOE-EM) has established a Performance Assessment Community of Practice (PA CoP) to foster the sharing of information among performance assessment (PA) and risk assessment practitioners, regulators and oversight personnel. The general intent is to contribute to continuous improvement in the consistency, technical adequacy and quality of implementation of PAs and risk assessments around the DOE Complex. The PA CoP activities have involved commercial disposal facilities and international participants to provide a global perspective. The PA CoP has also sponsored annual technical exchanges as a means to foster improved communication and to share lessons learned from on-going modelling activities. The PA CoP encourages activities to provide programmatic and technical assistance in the form of sharing experience and lessons learned with practitioners during the development of PAs and risk assessments. This assistance complements DOE-EM reviews through the Low-Level Waste Disposal Facility Federal Review Group (LFRG) that are conducted after modelling efforts are completed. Such up-front assistance is providing additional value in terms of improving consistency and sharing of information. There has been a substantial increase in the amount of assistance being provided. The assistance has been well received by practitioners and regulators that have been involved. The paper highlights assistance and sharing of information that has been conducted in the last two years to support activities underway in support of proposed disposal facilities at Paducah, Portsmouth, and the Idaho National Laboratory and tank closure at Hanford.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Enhancing the Impact of Science Data: Toward Data Discovery and Reuse

The amount of data produced in support of scientific research continues to grow rapidly. Despite the accumulation and demand for scientific data, relatively little data are actually made available for the broader scientific community. We surmise that one root of this problem is the perceived difficulty of electronically publishing scientific data and associated metadata in a way that makes it discoverable. We propose exploiting Semantic Web technologies and best practices to make metadata both discoverable and easy to publish. We share experiences in curating metadata to illustrate the cumbersome nature of data reuse in the current research environment. We also make recommendations with a real-world example of how data publishers can provide their metadata by adding limited additional markup to HTML pages on the Web. With little additional effort from data publishers, the difficulty of data discovery, access, and sharing can be greatly reduced and the impact of research data greatly enhanced.

Data Curation↗

Experiences in the Practice of Design of Experiments at NASA

Statistical design of experiments (DOE) has gained recognition within NASA by spurring innovation and efficiency, and it has demonstrated significant impact. Aerospace research and development benefits DOE techniques by accelerating learning, maximizing knowledge, ensuring strategic resource investment, and informing data-driven decisions. In practice, DOE relies on multidisciplinary collaboration to develop solution strategies that integrate statistical methods with subject-matter expertise to meet challenging research objectives. This presentation shares experiences in the practice of design of experiments at NASA in aeronautics, space exploration, and atmospheric science.

Peter A. Parker↗

Multidisciplinary Design, Analysis, and Optimization (MDO) for Co-Designed Transmission & Distribution Electric Grid Planning

This paper describes early experiences and example use cases applying multi-disciplinary design analysis and optimization (MDO) to the integrated design of power grids. Adapted from aerospace, MDO enables combining multiple existing tools into a coordinated optimization. Here we use MDO to simultaneously capture integrated transmission-distribution and investment-engineering trade-offs in an automated framework. Example use cases showcase prototype interactions among existing grid models using MDO and hint at the types of integrated analyses enabled by this approach. In addition, we share experiences and thoughts on grid-specific challenges and opportunities to help advance further work in this area.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Assessing the Potential of Social Networks as a Means for Information Diffusion the Weatherization Experiences (WE) Project.

In April 2009, U.S. Department of Energy (DOE) formally tasked Oak Ridge National Laboratory (ORNL) with conducting two impact and process evaluations of DOE’s Weatherization Assistance Program (WAP), known as the retrospective and American Recovery and Reinvestment Act of 2009 (ARRA) period evaluations, respectively. The former focused on WAP Program Year (PY) 2008, which covers the period from April 2008 to June 2009. The latter focused on PY 2010. This report presents in-depth analyses from ORNL’s social network study, the Weatherization Experiences (WE) Project, an exploratory study conducted as part of the ARRA period WAP evaluation. The WE Project explored the potential for WAP recipients and staff to influence energy savings beyond their homes and day jobs. Several studies conducted through ORNL’s evaluation of WAP found that the program has the ability to profoundly impact the lives of the people it serves (Tonn et al. 2014b). Recipients of WAP provided statements ranging from the newfound ability to pay utility bills and prescription medication to reduced emergency department visits for asthma and medical conditions associated with thermal stress. Through this exploratory research project, the stories of hundreds of weatherization recipients and providers were documented. The WE Project was designed to further investigate whether or not shared experiences with weatherization have the power to stimulate home energy saving action within an individual’s social network.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Extending Rucio with modern cloud storage support

Rucio is a software framework designed to facilitate scientific collaborations in efficiently organising, managing, and accessing extensive volumes of data through customizable policies. The framework enables data distribution across globally distributed locations and heterogeneous data centres, integrating various storage and network technologies into a unified federated entity. Rucio offers advanced features like distributed data recovery and adaptive replication, and it exhibits high scalability, modularity, and extensibility. Originally developed to meet the requirements of the high-energy physics experiment ATLAS, Rucio has been continuously expanded to support LHC experiments and diverse scientific communities. Recent R&D projects within these communities have evaluated the integration of both private and commercially-provided cloud storage systems, leading to the development of additional functionalities for seamless integration within Rucio. Furthermore, the underlying systems, FTS and GFAL/Davix, have been extended to cater to specific use cases. This contribution focuses on the technical aspects of this work, particularly the challenges encountered in building a generic interface for self-hosted cloud storage, such as MinIO or CEPH S3 Gateway, and established providers like Google Cloud Storage and Amazon Simple Storage Service. Additionally, the integration of decentralised clouds like SEAL is explored. Key aspects, including authentication and authorisation, direct and remote access, throughput and cost estimation, are highlighted, along with shared experiences in daily operations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Heliostat Consortium: Update on Resource, Training, and Education Development and Women+ in Concentrating Solar

One of the major barriers to Concentrating Solar Power (CSP) industry growth in the U.S. is the lack of accessibility of expert knowledge, a lack of a stable workforce pipeline, and little public awareness of the technology area. Improved Resource, Training, and Education (RTE) is needed to address these gaps, to draw workers into the field from diverse technology areas and backgrounds, and to reduce the learning curves of newcomers into the industry. As part of the RTE topic under the NREL-led Heliostat Consortium (HelioCon), a public online resource database has been created to support information sharing across the heliostat and CSP community. Here, information will be presented on the existing and planned database resources, including introductory information about CSP and heliostats, a reference library of texts and publications, educational videos, a CSP power tower plant database and case studies, a contact list of component suppliers and developers, and a list of available software/metrology tools. Women+ in Concentrating Solar is a newly created organization to promote the education, professional development, and advancement of underrepresented genders in the Concentrating Solar Power (CSP) community in a way that includes diverse backgrounds, attitudes, and perspectives. The main objectives of the groups are to provide the following opportunities for underrepresented genders: 1) organize events to provide networking opportunities and community building, 2) boost partnerships and scientific collaboration, 3) create resources to facilitate knowledge and experience sharing, 4) provide mentorship programs to support those new to the industry, 5) bring visibility to underrepresented genders and attract more to the field, and 6) promote Diversity, Equity, and Inclusion (DEI) and engage minorities and underrepresented groups. Initial activities being pursued by the group include creating an expert database to support event organizers in recruiting speakers with representation of all gender identities, hosting online networking and webinar events, organizing conference events including seminars and networking/social events, and establishing a mentorship program to connect members in the CSP community across the globe. The group is open to all genders and has grown to over 60 members in its first few months.

concentrating solar↗

Summary Report for the Technical Interchange Meeting on Development of Baseline Material Properties and Design Guidelines for In-Space Manufacturing Activities

NASA Marshall Space Flight Center (MSFC) and the Agency as a whole are currently engaged in a number of in-space manufacturing (ISM) activities that have the potential to reduce launch costs, enhance crew safety, and provide the capabilities needed to undertake long-duration spaceflight. The recent 3D Printing in Zero-G experiment conducted on board the International Space Station (ISS) demonstrated that parts of acrylonitrile butadiene styrene (ABS) plastic can be manufactured in microgravity using fused deposition modeling (FDM). This project represents the beginning of the development of a capability that is critical to future NASA missions. Current and future ISM activities will require the development of baseline material properties to facilitate design, analysis, and certification of materials manufactured using in-space techniques. The purpose of this technical interchange meeting (TIM) was to bring together MSFC practitioners and experts in materials characterization and development of baseline material properties for emerging technologies to advise the ISM team as we progress toward the development of material design values, standards, and acceptance criteria for materials manufactured in space. The overall objective of the TIM was to leverage MSFC's shared experiences and collective knowledge in advanced manufacturing and materials development to construct a path forward for the establishment of baseline material properties, standards development, and certification activities related to ISM. Participants were asked to help identify research and development activities that will (1) accelerate acceptance and adoption of ISM techniques among the aerospace design community; (2) benefit future NASA programs, commercial technology developments, and national needs; and (3) provide opportunities and avenues for further collaboration.

Prater, T. J.↗

Impact of correlated data in validation procedures - 14483

The increasing demand on accuracy of criticality calculations leads to the question, how to treat correlated data of benchmark experiments correctly. Correlations in the process of validation arise for example if a configuration in a series of experiments shares certain components, e.g. fuel rods. Traditional methods of code validation do not treat correlations explicitly, but give a more conservative estimation of the bias. Including correlations can lead to a more precise estimation. In the work at hand, a method is discussed based on Bayes theorem to include correlations in the experimental data when estimating an application case k{sub eff}. After a short introduction to the applied method and the demonstration of the general capability of it to predict the k{sub eff} correctly, it is shown how the calculated k{sub eff} of an application case depends on correlations in experimental data for a simple Toy Model. The impact of ignoring correlations and taking to account lower and higher correlations is shown and discussed. Further results are shown using a database of correlated experimental data from the International Handbook of Criticality Safety Experiments to estimate the bias of two application cases. The experiments were chosen following the suggestion of the OECD/NEA EGUACSA Benchmark phase IV and consists of 21 experiments from the LEU-COMP-THERM series 007 and 039. With the extracted data results the calculated k{sub eff} values of the application cases are shown and discussed for different examples of correlations. The calculations were done by applying Monte-Carlo sampling methods with the GRS tool SUnCISTT, using ORNL's SCALE 6.1.2. This work discusses a possible way of treating correlations in the recalculation of critical experiments to get a more precise bias estimation of the used code system. It will be shown, that the presented method is capable to treat similarities in experimental setups of data used to calculate the bias correctly, independent of the size of similarities. The presented method is in principle capable of assessing regimes with little experimental data to estimate a bias. (authors)

42 ENGINEERING↗

The role of quantum computing in advancing scientific high-performance computing: A perspective from the ADAC institute

Quantum computing (QC) has gained significant attention over the past two decades due to its potential for speeding up classically demanding tasks. This transition from an academic focus to a thriving commercial sector is reflected in substantial global investments. While advancements in qubit counts and functionalities continue at a rapid pace, current quantum systems still lack the scalability for practical applications, facing challenges such as too high error rates and limited coherence times. Here, this perspective paper examines the relationship between QC and high-performance computing (HPC), highlighting their complementary roles in enhancing computational efficiency. It is widely acknowledged that even fully error-corrected QC will not be suited for all computational tasks. Rather, future compute infrastructures are anticipated to employ quantum acceleration within hybrid systems that integrate HPC and QC. While QC can enhance classical computing, traditional HPC remains essential for maximizing quantum acceleration. This integration is a priority for supercomputing centers and companies, sparking innovation to address the challenges of merging these technologies. The novelty of this work lies in its unique perspective, reflecting the collective insights of the Accelerated Data Analytics and Computing (ADAC) Institute, a global consortium of over 20 leading HPC centers. Recognizing the growing importance of QC, ADAC established a Quantum Computing Working Group in 2023 to foster collaboration and knowledge-sharing among its members. This paper synthesizes insights from the group’s collaborative efforts and incorporates findings from a member survey that captures shared experiences, ongoing projects, and strategic directions. By outlining the current landscape and challenges of QC integration into HPC ecosystems, this work offers HPC specialists practical and forward-looking guidance on the opportunities and implications of QC in computationally intensive endeavors.

Accelerated Data Analytics and↗

Transforming Science Through Software: Improving While Delivering 100×

The U.S. Department of Energy (DOE) Exascale Computing Project (ECP) funded the development of new (and the transformation of important existing) applications, libraries, and tools that realized improvement in performance and capabilities of often 100 times or more on emerging exascale computers. This exceptional gain inspired the title of this special issue: Transforming Science through Software: Improving while delivering 100X. The term 100X refers to advancing capabilities in modeling, simulation, and analysis by a factor of 100 or more using some combination of new algorithms, optimization techniques, software libraries, and programming models, coupled with the next generation of hardware for high-performance computing (HPC). The papers in this issue share experiences with the practice and science of scientific software development, with an emphasis on developing a coherent, portable, and sustainable HPC software ecosystem for next-generation computational science. Finally, we hope to foster expanded community efforts related to the fundamental role of sustainable scientific software ecosystems in advancing the computing sciences.

97 MATHEMATICS AND COMPUTING↗

MO-C-BRD-01: SBRT I: Overview of Simulation, Planning, and Delivery

SBRT is having a dramatic impact on radiation therapy of early-stage, locally advanced cancers. Treatment planning of SBRT is characterized by precise target volume delineation, highly conformal dose distribution, sharp dose gradient outside the target volume, and meticulous tumor motion management. Stringent dose volume constraints of SBRT require the treatment planning to be highly personalized. Not only the complete patient's medical information (anatomy, tumor size/shape/location/motion, breathing pattern, health status) should be taken into consideration during planning, but also a wide range of factors including imaging techniques (imaging modality, breathing control, immobilization, patient position, etc.), treatment planning techniques (3D-conformal, dynamic conformal arcs, IMRT, VMAT, etc.), image guidance techniques (CBCT, orthogonal X-Ray, fiducial marker tracking, fluoroscopy, etc.), and delivery techniques (FFF, gating, tracking, etc.). In addition, potential pitfalls may exist in SBRT techniques and processes, such as target volume error in 4DCT and image registration error in image guidance. How to manage these affecting factors to achieve optimal, personalized SBRT treatment plans remains a great challenge. In this proposal, we will review technologies, share experiences, and discuss strategies concerning SBRT simulation, planning, and delivery. Learning Objectives: Understand requirements and challenges of SBRT treatment planning Discuss information-driven strategies of developing optimal SBRT plans Discuss practical considerations and potential pitfalls of SBRT treatment planning.

60 APPLIED LIFE SCIENCES↗

WE-D-9A-06: Open Source Monitor Calibration and Quality Control Software for Enterprise Display Management

Purpose: Medical display monitor calibration and quality control present challenges to medical physicists. The purpose of this work is to demonstrate and share experiences with an open source package that allows for both initial monitor setup and routine performance evaluation. Methods: A software package, pacsDisplay, has been developed over the last decade to aid in the calibration of all monitors within the radiology group in our health system. The software is used to calibrate monitors to follow the DICOM Grayscale Standard Display Function (GSDF) via lookup tables installed on the workstation. Additional functionality facilitates periodic evaluations of both primary and secondary medical monitors to ensure satisfactory performance. This software is installed on all radiology workstations, and can also be run as a stand-alone tool from a USB disk. Recently, a database has been developed to store and centralize the monitor performance data and to provide long-term trends for compliance with internal standards and various accrediting organizations. Results: Implementation and utilization of pacsDisplay has resulted in improved monitor performance across the health system. Monitor testing is now performed at regular intervals and the software is being used across multiple imaging modalities. Monitor performance characteristics such as maximum and minimum luminance, ambient luminance and illuminance, color tracking, and GSDF conformity are loaded into a centralized database for system performance comparisons. Compliance reports for organizations such as MQSA, ACR, and TJC are generated automatically and stored in the same database. Conclusion: An open source software solution has simplified and improved the standardization of displays within our health system. This work serves as an example method for calibrating and testing monitors within an enterprise health system.

60 APPLIED LIFE SCIENCES↗

MO-A-BRB-03: Integration Issues in Electronic Charting for External Beam Therapy

The process of converting to an electronic chart for radiation therapy can be daunting. It requires a dedicated committee to first research and choose appropriate software, to review the entire documentation policy and flow of the clinic, to convert this system to electronic form or if necessary, redesign the system to more easily conform to the electronic process. Those making the conversion and those who already use electronic charting would benefit from the shared experience of those who have been through the process in the past. Therefore TG262 was convened to provide guidance on electronic charting for external beam radiation therapy and brachytherapy. This course will present the results of an internal survey of task group members on EMR practices in External Beam Radiation Therapy as well as discuss important issues in EMR development and structure for both EBRT and brachytherapy. Learning Objectives: Be familiarized with common practices and pitfalls in development and maintenance of an electronic chart in Radiation Oncology Be familiarized with important issues related to electronic charting in External Beam Radiation Therapy Be familiarized with important issues related to electronic charting in Brachytherapy.

07 ISOTOPE AND RADIATION SOURCES↗

MO-A-BRB-00: Electronic Charting in EBRT and Brachytherapy

The process of converting to an electronic chart for radiation therapy can be daunting. It requires a dedicated committee to first research and choose appropriate software, to review the entire documentation policy and flow of the clinic, to convert this system to electronic form or if necessary, redesign the system to more easily conform to the electronic process. Those making the conversion and those who already use electronic charting would benefit from the shared experience of those who have been through the process in the past. Therefore TG262 was convened to provide guidance on electronic charting for external beam radiation therapy and brachytherapy. This course will present the results of an internal survey of task group members on EMR practices in External Beam Radiation Therapy as well as discuss important issues in EMR development and structure for both EBRT and brachytherapy. Learning Objectives: Be familiarized with common practices and pitfalls in development and maintenance of an electronic chart in Radiation Oncology Be familiarized with important issues related to electronic charting in External Beam Radiation Therapy Be familiarized with important issues related to electronic charting in Brachytherapy.

07 ISOTOPE AND RADIATION SOURCES↗

MO-A-BRB-01: Review of TG-262 Internal Survey of Practices in EMR for External Beam Therapy

The process of converting to an electronic chart for radiation therapy can be daunting. It requires a dedicated committee to first research and choose appropriate software, to review the entire documentation policy and flow of the clinic, to convert this system to electronic form or if necessary, redesign the system to more easily conform to the electronic process. Those making the conversion and those who already use electronic charting would benefit from the shared experience of those who have been through the process in the past. Therefore TG262 was convened to provide guidance on electronic charting for external beam radiation therapy and brachytherapy. This course will present the results of an internal survey of task group members on EMR practices in External Beam Radiation Therapy as well as discuss important issues in EMR development and structure for both EBRT and brachytherapy. Learning Objectives: Be familiarized with common practices and pitfalls in development and maintenance of an electronic chart in Radiation Oncology Be familiarized with important issues related to electronic charting in External Beam Radiation Therapy Be familiarized with important issues related to electronic charting in Brachytherapy.

07 ISOTOPE AND RADIATION SOURCES↗

MO-A-BRB-02: Considerations and Issues in Electronic Charting for Brachytherapy

The process of converting to an electronic chart for radiation therapy can be daunting. It requires a dedicated committee to first research and choose appropriate software, to review the entire documentation policy and flow of the clinic, to convert this system to electronic form or if necessary, redesign the system to more easily conform to the electronic process. Those making the conversion and those who already use electronic charting would benefit from the shared experience of those who have been through the process in the past. Therefore TG262 was convened to provide guidance on electronic charting for external beam radiation therapy and brachytherapy. This course will present the results of an internal survey of task group members on EMR practices in External Beam Radiation Therapy as well as discuss important issues in EMR development and structure for both EBRT and brachytherapy. Learning Objectives: Be familiarized with common practices and pitfalls in development and maintenance of an electronic chart in Radiation Oncology Be familiarized with important issues related to electronic charting in External Beam Radiation Therapy Be familiarized with important issues related to electronic charting in Brachytherapy.

07 ISOTOPE AND RADIATION SOURCES↗