SEARCH · Engineering Papers
Results for “shape optimization”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Three-dimensional alignment of asymmetric-top molecules induced by polarization-shaped optimal laser pulses
Optimal control simulation is applied to numerically design nonresonant laser pulses that maximize the degrees of three-dimensional (3D) alignment of SO 2 using the lowest-order induced-dipole interaction. In our trials, combinations of more than two mutually orthogonal, linearly polarized subpulses are always obtained as the optimal solutions. Each subpulse in the optimal pulses impulsively excites the rotational wave packet. The optimal pulses effectively cooperate with the rotational dynamics up to only a few partial revival timings owing to the rotational dephasing that determines the effective control periods. The control mechanisms are interpreted in terms of the time derivatives of the expectation values of the squares of the direction cosines, that of the rotational energy, and the interplay between them. We find a special and important role of the last subpulses as they align the molecular axes using the interaction through the two smallest polarizability components, while the other subpulses excite the rotational wave packet mainly through the largest polarizability component. Lastly, the control pulses composed of the specified number of subpulses are also numerically optimized by actively utilizing the instantaneous penalty to systematically show the superiority of the use of more than two subpulses over that of two subpulses, the latter of which leads to the saturation of the degree of 3D alignment as a function of total fluence.
Niobium quarter-wave resonator with the optimized shape for quantum information systems
Not Available
Adjoint shape optimization applied to electromagnetic design
Explore the source record for details and available documents.
MLDL Presentation Video: Deep Neural Operators as Accurate Surrogates for Shape Optimization
Presentation on content from this publication: https://www.sciencedirect.com/science/article/pii/S0952197623017992
MLDL Presentation Slides: Deep Neural Operators as Accurate Surrogates for Shape Optimization
Presentation on content from this publication: https://www.sciencedirect.com/science/article/pii/S0952197623017992
Building a PDE with Componenets including shape optimization and embedded UQ.
Abstract not provided.
A Comparison of 3D Mesh Morphing Methods for CAD Based Shape Optimization.
Abstract not provided.
A Comparison of Mesh Morphing Methods for 3D Shape Optimization.
Abstract not provided.
High-fidelity Isosurface Extraction of Topology Optimized Shapes for Additive Manufacturing.
Abstract not provided.
Automated Geometry and Mesh Updates for Accelerator Shape Optimization
Explore the source record for details and available documents.
Learning Optimal Aerodynamic Designs
This project created a framework for efficient, accurate, and scalable deep neural network representations of design optimization problem solutions. The inputs to these DNN representations are the vector of design requirement parameters, the outputs are the optimal design variables, and the goal is to learn the map from inputs to outputs (i.e., inverse design). The team addressed the problem of the optimal shape design of aerodynamic lifting surfaces—in particular aircraft wings—using a Reynolds-Average Navier Stokes model to govern the CFD-based aerodynamic shape optimization. The inverse design map for such problems is very complex and high-dimensional, involving inputs and outputs on the order of 1000s. To approximate this inverse design map, the team developed algorithms to construct parsimonious DNN architectures, which automatically identify low-dimensional manifolds in which design requirements affect optimal shape parameters, and trained these architectures with multifidelity optimization methods. The resulting methodology accurately and automatically designs optimal aerodynamic lifting surfaces with very high accuracy (99%) at interactive speeds, of the order of milliseconds, resulting in factors of one million or more speedup relative to CFD-based design optimization.
Optimized mirror shape tuning using beam weightings based on distance, angle of incidence, reflectivity, and power
For glancing-incidence optical systems, such as short-wavelength optics used for nano-focusing, incorporating physical factors in the calculations used for shape optimization can improve performance. Wavefront metrology, including the measurement of a mirror's shape or slope, is routinely used as input for mirror figure optimization on mirrors that can be bent, actuated, positioned, or aligned. Modeling shows that when the incident power distribution, distance from focus, angle of incidence, and the spatially varying reflectivity are included in the optimization, higher Strehl ratios can be achieved. Following the works of Maréchal and Mahajan, optimization of the Strehl ratio (for peak intensity with a coherently illuminated system) occurs when the expectation value of the phase error's variance is minimized. We describe an optimization procedure based on regression analysis that incorporates these physical parameters. This approach is suitable for coherently illuminated systems of nearly diffraction-limited quality. Mathematically, this work is an enhancement of the methods commonly applied for ex situ alignment based on uniform weighting of all points on the surface (or a sub-region of the surface). It follows a similar approach to the optimization of apodized and non-uniformly illuminated optical systems. Significantly, it reaches a different conclusion than a more recent approach based on minimization of focal plane ray errors.
Computational design of metamaterials with self contact
Inverse homogenization in combination with contact modeling, topology optimization and shape optimization is used to design metamaterials with optimized macroscopic response. The homogenization assumes length scale separation which allows the non-linear macroscopic behavior to be obtained by analyzing a single unit cell in a lattice structure. Self contact in the unit cell, which is modeled using a third medium contact method, is leveraged to obtain a complex homogenized response. The inverse homogenization problem is initially formulated as a topology optimization problem, where the macroscopic stress–strain behavior is tuned to our liking. However, it is well known that boundary phenomena are difficult to model in topology optimization and that interface modeling is crucial to accurately analyze contact. For that reason, the boundary representation of the topology optimized design is extracted and used as initial design in a subsequent shape optimization. The behaviors of our designs are verified by performing rigorous post-processing analyzes using conforming meshes and conventional contact formulations.
ExaAM: Metal additive manufacturing simulation at the fidelity of the microstructure
Additive manufacturing (AM), or 3D printing, of metals is transforming the fabrication of components, in part by dramatically expanding the design space, allowing optimization of shape and topology. However, although the physical processes involved in AM are similar to those of welding, a field with decades of experimental, modeling, simulation, and characterization experience, qualification of AM parts remains a challenge. The availability of exascale computational systems, particularly when combined with data-driven approaches such as machine learning, enables topology and shape optimization as well as accelerated qualification by providing process-aware, locally accurate microstructure and mechanical property models. We describe the physics components comprising the Exascale Additive Manufacturing simulation environment and report progress using highly resolved melt pool simulations to inform part-scale finite element thermomechanics simulations, drive microstructure evolution, and determine constitutive mechanical property relationships based on those microstructures using polycrystal plasticity. We report on implementation of these components for exascale computing architectures, as well as the multi-stage simulation workflow that provides a unique high-fidelity model of process–structure–property relationships for AM parts. In addition, we discuss verification and validation through collaboration with efforts such as AM-Bench, a set of benchmark test problems under development by a team led by the National Institute of Standards and Technology.
Analytical optimal pulse shapes obtained with the aid of genetic algorithms
We propose a methodology to design optimal pulses for achieving quantum optimal control on molecular systems. Our approach constrains pulse shapes to linear combinations of a fixed number of experimentally relevant pulse functions. Quantum optimal control is obtained by maximizing a multi-target fitness function using genetic algorithms. As a first application of the methodology, we generated an optimal pulse that successfully maximized the yield on a selected dissociation channel of a diatomic molecule. Our pulse is obtained as a linear combination of linearly chirped pulse functions. Data recorded along the evolution of the genetic algorithm contained important information regarding the interplay between radiative and diabatic processes. We performed a principal component analysis on these data to retrieve the most relevant processes along the optimal path. Our proposed methodology could be useful for performing quantum optimal control on more complex systems by employing a wider variety of pulse shape functions.