Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sequential”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Sequential filtering applied to the determination of tracking station locations

The extended sequential filter has been applied to the problem of dynamically determining the geocentric coordinates of two laser satellite tracking stations. This filter provides significant advantages over the classical batch methods through (1) fewer iterations required for convergence, (2) wider radius of convergence, and (3) availability of the parameter estimate evolution. Processing the data sequentially readily identifies the data arcs required to minimize the effects of geopotential model errors. By means of the Smithsonian standard earth 2 and the Goddard earth model 1 geopotentials to reduce laser range observations of the Beacon Explorer-C satellite, it is demonstrated that a two-pass arc is optimal for estimating the height of one station and all coordinates of the second station while minimizing the effect of geopotential model error. These two-pass estimates are in good agreement with other determinations that utilize considerably more data as well as different satellites.

Schutz, B. E.↗
NASA NTRS1975

Performance of a finite phase state bit-synchronization loop with and without sequential filters

A discrete phase state bit-synchronization loop is proposed for synchronization and detection of a binary nonreturn-to-zero (NRZ) process. The general loop model is developed for 11 and 17 phase states with optional sequential loop filter. Loop performance is considered in terms of the phase error density function, rms phase error, and mean time to bit slippage. It is shown that satisfactory loop performance can be achieved at -3 dB SNR through use of sequential loop filters.

Ransom, J. J.↗
NASA NTRS1982

Flow through aligned sequential orifice type inlets

Chocked flow rate and pressure profile data were taken and studied for configurations consisting of four axially aligned, sequential orifice inlets of 0.5 length diameter ratio with separation distances of 0.66 and 32 diameters. A flow coefficient - reduced temperature plot represents the flow rate data for the two cases. At a separation distance of 32 diameters the pressure profiles dropped sharply at the entrance and partially recovered within each orifice - the exception being at low temperatures, where fluid jetting through the last orifice occurred. At a separation distance of 0.66 diameter fluid jetting was prevalent at the lower inlet temperatures. These results are in qualitative agreement with data for four axially aligned, sequential Borda inlets and for tubes with single sharp edge orifice or Borda inlets to L/D's of 105 and with a water flow visualization study.

Hendricks, R. C.↗
NASA NTRS1983

Studies of flows through N-sequential orifices

Critical mass flux and axial pressure profile data for fluid nitrogen are presented for N = 20, 15, 10, and 7 N-sequential orifice inlet configurations uniformly spaced at 15.5 cm. These data correlate well over a wide range in reduced temperature (0.7 T sub r,o ambient) and reduced pressure (to P sub r = 2) and are in general agreement with studies of one to four inlets and labyrinth seal gas data for 33 tooth equivalent sequential inlets. Experimental and theoretical agreement is good for liquid and gas critical mass flux.

Hendricks, R. C.↗
NASA NTRS1982

Least-squares sequential parameter and state estimation for large space structures

This paper presents the formulation of simultaneous state and parameter estimation problems for flexible structures in terms of least-squares minimization problems. The approach combines an on-line order determination algorithm, with least-squares algorithms for finding estimates of modal approximation functions, modal amplitudes, and modal parameters. The approach combines previous results on separable nonlinear least squares estimation with a regression analysis formulation of the state estimation problem. The technique makes use of sequential Householder transformations. This allows for sequential accumulation of matrices required during the identification process. The technique is used to identify the modal prameters of a flexible beam.

Thau, F. E.↗
NASA NTRS1984

Optical flip-flops and sequential logic circuits using a liquid crystal light valve

This paper is concerned with the application of optics to digital computing. A Hughes liquid crystal light valve is used as an active optical element where a weak light beam can control a strong light beam with either a positive or negative gain characteristic. With this device as the central element the ability to produce bistable states from which different types of flip-flop can be implemented is demonstrated. In this paper, some general comments are first presented on digital computing as applied to optics. This is followed by a discussion of optical implementation of various types of flip-flop. These flip-flops are then used in the design of optical equivalents to a few simple sequential circuits such as shift registers and accumulators. As a typical sequential machine, a schematic layout for an optical binary temporal integrator is presented. Finally, a suggested experimental configuration for an optical master-slave flip-flop array is given.

Fatehi, M. T.↗
NASA NTRS1986

The Sequential Filter Imaging Radiometer (SFIR), a new instrument configuration for Earth observations

The sequential filter imaging radiometer (SFIR) concept is presented, contrasted with other sensor configurations, and its strengths and weaknesses discussed. In a pushbroom SFIR the optics images the scene onto a long, narrow area array. The length of the array defines the field of view. The spectral defining filters are sequentially placed over the full array, a sample of data for that band taken, and then the next filter placed in front of the array. All of the filters are placed over the array in the time that it takes the image of the scene to advance the array width. Thus the entire scene is observed in each band. Advantages of the SFIR are: spectral bands can be broad, narrow or overlap; it is easy to improve signal to noise ratio; and it is simple to make bands polarized. Its main disadvantage is that it requires more detectors than other instrument configurations.

Maxwell, M. S.↗
NASA NTRS1987

Exposure compensation for sequential superposition holographic display

A fast and computationally simple computer-aided holographic technique for producing low-information-content 3-D displays by sequential superimposition of point-object Fresnel holograms is described. An exposure control algorithm is used to ensure uniformity of exposure across the sequentially superimposed holograms. The result is a significant increase in the number of recordable object points. The algorithm has been used to produce displays containing up to 2800 individual point exposures.

Gaynor, Edwin S.↗
NASA NTRS1988

The sequential filter imaging radiometer (SFIR)- A new instrument configuration for earth observations

The sequential filter imaging radiometer (SFIR) concept is presented, contrasted with other sensor configurations, and its strengths and weaknesses discussed. In a pushbroom SFIR the optics images the scene onto a long, narrow area array. The length of the array defines the field of view. The spectral defining filters are sequentially placed over the full array, a sample of data for that band taken, and then the next filter is placed in front of the array. All filters are placed over the array in the time that it takes the image of the scene to advance the array width. Thus, the entire scene is observed in each band. Advantages of the SFIR are: spectral bands can be broad, narrow or overlap; it is easy to improve signal to noise ratio; and it is simple to make bands polarized. Its main disadvantage is that it requires more detectors than other instrument configurations.

Maxwell, Marvin S.↗
NASA NTRS1988

Sequential design of linear quadratic state regulators via the optimal root-locus techniques

The use of well-known root-locus techniques for sequentially finding the weighting matrices and the linear quadratic state regulators of multivariable control systems in the frequency domain is considered. This sequential design method permits the retention of some stable open-loop poles and the associated eigenvectors in the closed-loop system; it also allows some optimal closed-loop poles to be placed in a specific region of the complex plane. In addition, it provides a design procedure for determining the weighting matrices and linear quadratic state regulators for the optimal control of multivariable systems in the frequency domain.

Shieh, L. S.↗
NASA NTRS1991

Derivation of sequential, real-time, process-control programs

The use of weakest-precondition predicate transformers in the derivation of sequential, process-control software is discussed. Only one extension to Dijkstra's calculus for deriving ordinary sequential programs was found to be necessary: function-valued auxiliary variables. These auxiliary variables are needed for reasoning about states of a physical process that exists during program transitions.

Marzullo, Keith↗
NASA NTRS1991

Evaluation of TDRSS-user orbit determination accuracy using batch least-squares and sequential methods

The development of the Real-Time Orbit Determination/Enhanced (RTOD/E) system as a prototype system for sequential orbit determination on a Disk Operating System (DOS) based Personal Computer (PC) is addressed. The results of a study to compare the orbit determination accuracy of a Tracking and Data Relay Satellite System (TDRSS) user spacecraft obtained using RTOD/E with the accuracy of an established batch least squares system, the Goddard Trajectory Determination System (GTDS), is addressed. Independent assessments were made to examine the consistencies of results obtained by the batch and sequential methods. Comparisons were made between the forward filtered RTOD/E orbit solutions and definitive GTDS orbit solutions for the Earth Radiation Budget Satellite (ERBS); the maximum solution differences were less than 25 m after the filter had reached steady state.

Oza, D. H.↗
NASA NTRS1992

Landsat-4 (TDRSS-user) orbit determination using batch least-squares and sequential methods

TDRSS user orbit determination is analyzed using a batch least-squares method and a sequential estimation method. It was found that in the batch least-squares method analysis, the orbit determination consistency for Landsat-4, which was heavily tracked by TDRSS during January 1991, was about 4 meters in the rms overlap comparisons and about 6 meters in the maximum position differences in overlap comparisons. The consistency was about 10 to 30 meters in the 3 sigma state error covariance function in the sequential method analysis. As a measure of consistency, the first residual of each pass was within the 3 sigma bound in the residual space.

Oza, D. H.↗
NASA NTRS1973

Practical applications of digital integrated circuits. Part 3: Practical sequential theory and synchronous circuits

Here, the 7400 line of transistor to transistor logic (TTL) devices is emphasized almost exclusively where hardware is concerned. However, it should be noted that the logic theory contained herein applies to all hardware. Discussed here are synchronous binary UP counters, synchronous DOWN and UP/DOWN counters, integrated circuit counters, shift registers, sequential techniques, and designing sequential counting machines.

Source record↗
NASA NTRS1993

Development of high-accuracy convection schemes for sequential solvers

An exploration is conducted of the applicability of such high resolution schemes as TVD to the resolving of sharp flow gradients using a sequential solution approach borrowed from pressure-based algorithms. It is shown that by extending these high-resolution shock-capturing schemes to a sequential solver that treats the equations as a collection of scalar conservation equations, the speed of signal propagation in the solution has to be coordinated by assigning the local convection speed as the characteristic speed for the entire system. A higher amount of dissipation is therefore needed to eliminate oscillations near discontinuities.

Thakur, Siddharth↗
NASA NTRS1990

Self arbitrated VLSI asynchronous sequential circuits

A new class of asynchronous sequential circuits is introduced in this paper. The new design procedures are oriented towards producing asynchronous sequential circuits that are implemented with CMOS VLSI and take advantage of pass transistor technology. The first design algorithm utilizes a standard Single Transition Time (STT) state assignment. The second method introduces a new class of self synchronizing asynchronous circuits which eliminates the need for critical race free state assignments. These circuits arbitrate the transition path action by forcing the circuit to sequence through proper unstable states. These methods result in near minimum hardware since only the transition paths associated with state variable changes need to be implemented with pass transistor networks.

Whitaker, S.↗
NASA NTRS1990

Implications of Tracey's theorem to asynchronous sequential circuit design

Tracey's Theorem has long been recognized as essential in generating state assignments for asynchronous sequential circuits. This paper shows that Tracey's Theorem also has a significant impact in generating the design equations. Moreover, this theorem is important to the fundamental understanding of asynchronous sequential operation. The results of this work simplify asynchronous logic design. Moreover, detection of safe circuits is made easier.

Gopalakrishnan, S.↗