Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sawtooth”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Solar energy collection system

A fixed, linear, ground-based primary reflector having an extended curved sawtooth-contoured surface covered with a metalized polymeric reflecting material, reflects solar energy to a movably supported collector that is kept at the concentrated line focus reflector primary. The primary reflector may be constructed by a process utilizing well known freeway paving machinery. The solar energy absorber is preferably a fluid transporting pipe. Efficient utilization leading to high temperatures from the reflected solar energy is obtained by cylindrical shaped secondary reflectors that direct off-angle energy to the absorber pipe. A seriatim arrangement of cylindrical secondary reflector stages and spot-forming reflector stages produces a high temperature solar energy collection system of greater efficiency.

Miller, C. G.↗

Some features of pararesonance /PR/ whistlers

Pararesonance (PR) whistlers observed in the topside ionosphere by the Dartmouth receiver on Ogo 6 are examined. The study extends that of Walter and Angerami (1969) to higher frequencies and shows that the upper cutoff frequency of PR whistlers closely follows a 1/L to the 4th dependence from 6 to 100 kHz (at L = 2.90 and 1.37, respectively). Most PR whistlers are attached to paralongitudinal (PL) whistlers due, presumably, to intermode coupling. The 'walking trace', or unattached PR whistler, reported by Walter and Angerami is evidently unusual. The upper cutoff frequency follows 1/L to the 4th whether attachment occurs or not. Rising sawtooth appendages starting at the upper cutoff frequency are frequency seen on PR whistlers.

Morgan, M. G.↗

Upper surface blowing noise of the NASA-Ames quiet short-haul research aircraft

An experimental study of the propulsive-lift noise of the NASA-Ames quiet short-haul research aircraft (QSRA) is described. Comparisons are made of measured QSRA flyover noise and model propulsive-lift noise data available in references. Developmental tests of trailing-edge treatments were conducted using sawtooth-shaped and porous USB flap trailing-edge extensions. Small scale parametric tests were conducted to determine noise reduction/design relationships. Full-scale static tests were conducted with the QSRA preparatory to the selection of edge treatment designs for flight testing. QSRA flight and published model propulsive-lift noise data have similar characteristics. Noise reductions of 2 to 3 dB were achieved over a wide range of frequency and directivity angles in static tests of the QSRA. These noise reductions are expected to be achieved or surpassed in flight tests planned by NASA in 1980.

Bohn, A. J.↗

Steady state volcanism - Evidence from eruption histories of polygenetic volcanoes

Cumulative volcano volume curves are presented as evidence for steady-state behavior at certain volcanoes and to develop a model of steady-state volcanism. A minimum criteria of five eruptions over a year was chosen to characterize a steady-state volcano. The subsequent model features a constant head of magmatic pressure from a reservoir supplied from depth, a sawtooth curve produced by the magma arrivals or discharge from the subvolcanic reservoir, large volume eruptions with long repose periods, and conditions of nonsupply of magma. The behavior of Mts. Etna, Nyamuragira, and Kilauea are described and show continuous levels of plasma output resulting in cumulative volume increases. Further discussion is made of steady-state andesitic and dacitic volcanism, long term patterns of the steady state, and magma storage, and the lack of a sufficient number of steady-state volcanoes in the world is taken as evidence that further data is required for a comprehensive model.

Wadge, G.↗

Pair production in superstrong magnetic fields

The production of electron-positron pairs by single photons in magnetic fields 10 to the twelth power G was investigated in detail for photon energies near threshold as well as for the asymptotic limit of high photon energy. The exact attenuation coefficient, which is derived and then evaluated numerically, is strongly influenced by the discrete energy states of the electron and positron. Near threshold, it exhibits a sawtooth pattern as a function of photon energy, and its value is significantly below that predicted by the asymptotic expression for the attenuation coefficient. The energy distributions of the created pair are computed numerically near threshold and analytic expressions are derived in the asymptotic limit. These results indicate that as field strength and photon energy increase, it becomes increasingly probable for the pair to divide the photon energy unequally. This effect, as well as the threshold behavior of the attenuation coefficient, could have important consequences for pulsar models.

Daugherty, J. K.↗

Quasi-steady solar wind dynamics

Progress in understanding the large scale dynamics of quasisteady, corotating solar wind structure was reviewed. The nature of the solar wind at large heliocentric distances preliminary calculations from a 2-D MHD model are used to demonstrate theoretical expectations of corotating structure out to 30 AU. It is found that the forward and reverse shocks from adjacent CIR's begin to interact at about 10 AU, producing new shock pairs flanking secondary CIR's. These sawtooth secondary CIR's interact again at about 20 AU and survive as visible entities to 30 AU. The model predicts the velocity jumps at the leading edge of the secondary CIR's at 30 AU should be very small but there should still be sizable variations in the thermodynamic and magnetic parameters. The driving dynamic mechanism in the distant solar wind is the relaxation of pressure gradients. The second topic is the influence of weak, nonimpulsive time dependence in quasisteady dynamics. It is suggested that modest large scale variations in the coronal flow speed on periods of several hours to a day may be responsible for many of the remaining discrepancies between theory and observation. Effects offer a ready explanation for the apparent rounding of stream fronts between 0.3 and 1.0 AU discovered by Helios.

Pizzo, V. J.↗

Pair production in superstrong magnetic fields

The production of electron-positron pairs by single photons in magnetic fields of not less than about 10 to the 12th gauss has been investigated in detail for photon energy. The exact attenuation coefficient, which is derived and then evaluated numerically, is strongly influenced by the discrete energy states of the electron and positron. Near threshold, it exhibits a 'sawtooth' pattern as a function of photon energy and its value is significantly below that predicted by the asymptotic expression for the attenuation coefficient. The energy distributions of the created pair are computed numerically near threshold, and analytic expressions are derived in the asymptotic limit. These results indicate that as field strength and photon energy increase, it becomes increasingly probable for the pair to divide strength energy unequally. This effect, as well as the threshold behavior of the attenuation coefficient, could have important consequences to pulsar models.

Daugherty, J. K.↗

The forward-reverse shock pair at large heliocentric distances

An unsteady one-dimensional numerical magnetohydrodynamic (MHD) model is developed in order to study the essential physical processes involved in the development of the forward-reverse shock pair in the heliosphere. In the model, MHD shocks are treated as boundary surfaces which divide the domain of interest in the r-t plane into several flow regions. The positions of the shock boundary surfaces between two neighboring flow regions are determined by shock speed. On the basis of integrations of the model, it is found that the strong MHD disturbances generated in a corotating interaction region (CIR) propagate at a fast speed relative to the moving material, and that the wave propagation speed is greater in CIR than in its surroundings. This causes disturbances in CIR to pile up and form a shock pair. The newly formed shock pair will in turn propagate outward from the leading edge to interact with ambient rarefaction regions. This interaction accounts for the double sawtooth configuration observed in velocity profiles of shock pairs. It is also demonstrated that the merging of two shocks produces a stronger shock and constant surface on its backside. Computer generated velocity profiles based on the model are presented.

Whang, Y. C.↗

Formation of a pn junction on an anisotropically etched GaAs surface using metalorganic chemical vapor deposition

A continuous p-type GaAs epilayer has been deposited on an n-type sawtooth GaAs surface using MOCVD. A wet chemical etching process was used to expose the intersecting (111)Ga and (-1 -1 1)Ga planes with 6-micron periodicity. Charge-collection microscopy was used to verify the presence of the pn junction thus formed and to measure its depth. The ultimate goal of this work is to fabricate a V-groove GaAs cell with improved absorptivity, high short-circuit current, and tolerance to particle radiation.

Leon, R. P.↗

Evidence for periodic radial velocity variations in Arcturus

Evidence for periodic radial velocity variation in Arcturus based on Doppler accelerometer studies is reported. The most likely period and amplitude for these variations are 1.842 + or - 0.005 days and 160 + or - 10 m/s, respectively. Epoch-folding of 31 nights of Arcturus data taken between December 21, 1985 and March 31, 1986 reveals a sawtooth phase diagram. Two physical mechanisms as potential causes of this variation are briefly discussed.

Smith, P. H.↗

Analysis of the breakdown of the Antarctic circumpolar vortex using TOMS ozone data

Climatological analysis of data from the Total Ozone Mapping Spectrometer (TOMS) on the Nimbus 7 satellite has shown that the annual cycles of ozone are very different in the Arctic and Antarctic. The annual cycle in the Arctic is a relatively smooth annual sine wave; but in the Antarctic the circumpolar vortex breaks down rapidly during the Southern Hemisphere spring (September through November), producing a rapid rise in total ozone and a sawtooth-shaped annual cycle. The evolution of the Antarctic total ozone field during the vortex breakdown was studied by computing areally-integrated ozone amounts from the TOMS data. This technique avoids substantial difficulties with using zonally-averaged ozone amounts to study the asymmetric breakdown phenomenon. Variability of total ozone is found to be large both within an individual year and between different years. During the last decade monthly-mean total ozone values in the Antarctic during the springtime vortex breakdown period have decreased dramatically. The ozone-area statistics indicate that the decrease has resulted in part from changes in the timing of the vortex breakdown and resultant ozone increase, which have occurred later during recent years. Analysis of the spatial scales involved in the ozone transport and mixing that occur during the vortex breakdown is now underway. Reliable calculation of diagnostic quantities like areally-integrated ozone is possible only with the high-resolution, two-dimensional, daily coverage provided by the TOMS instrument.

Bowman, Kenneth P.↗

Containment of a silicone fluid free surface in reduced gravity using barrier coatings

In support of the Surface Tension Driven Convection Experiment planned for flight aboard the Space Shuttle, tests were conducted under reduced gravity in the 2.2-sec Drop Tower and the 5.0-sec Zero-G facility at the NASA Lewis Research Center. The dynamics of controlling the test fluid, a 10-cSt viscosity silicone fluid in a low gravity environment were investigated using different container designs and barrier coatings. Three container edge designs were tested without a barrier coating; a square edge, a sharp edge with a 45-deg slope, and a sawtooth edge. All three edge designs were successful in containing the fluid below the edge. G-jitter experiments were made in scaled down containers subjected to horizontal accelerations. The data showed that a barrier coating is effective in containing silicone fluid under g-levels up to 10 sup -1 sub g sub 0. In addition, a second barrier coating was found which has similar anti-wetting characteristics and is also more durable.

Pline, Alexander D.↗

Waveform-Generating Program

GENERATE (Digital Generation of Complex Waveforms) computer program is flexible and reliable software tool for advanced generation of waveforms. User employs standard arithmetic operator (+, -, x, /, and parentheses) to simulate any combination of eight commonly used basic waveforms at desired amplitude and frequency. Creates data file based on user's selections from menu. Provides necessary equations describing eight basic waveforms and enables user to combine them arithmetically. Basic waveforms offered as building blocks; sine, ramp, exponential, logarithmic, step, clipped sine, square, and sawtooth. Also contains routine for plotting output waveform data on terminal with Tektronics (or equivalent) emulator, providing visual confirmation of desirability of waveform. Developed by use of VMS FORTRAN on DEC VAX 3600 computer.

Hopson, Charles B.↗

Wave pressure in stellar atmospheres due to shock wave trains

Analytic expressions for the wave pressure of propagating shock wave trains in stellar atmospheres or winds are derived. Applications to weak shocks and stronger shocks with sawtooth profiles are discussed in detail. The shocks are treated as discontinuities. The results provide insight in the momentum balance of time-dependent stellar wind flows. The analytic expressions can be used as an independent test of hydrodynamic codes.

Gail, H.-P.↗

Effects of sweep angle and passive relaminarization devices on a supersonic swept-cylinder boundary layer

The effects of passive leading-edge devices on the boundary layer of a swept cylinder in supersonic flow with very low free-stream disturbance levels are investigated. Tests are conducted at Mach 3.5 over a free-stream Reynolds number based on model diameter of 15,000 to 150,000, and sweep angles of 60 deg and 76 deg are used to evaluate possible sweep-angle effects. The devices tested include a sawtoothed leading edge, square device, and a fence. It is observed that at a sweep angle of 76 deg, relaminarization of the supersonic attachment-line flow is achieved by several of the devices, while no devices are successful at a sweep angle of 60 deg.

Creel, T. R.↗

Bandwidth-Synthesizing FM Radar

Proposed frequency-modulation (FM) radar system uses sawtooth-wave-form linear frequency sweeps and return-signal-processing scheme in which samples of signals from N consecutive sweep periods are combined to multiply range resolution by factor of N. System "synthesizes" bandwith N times that of transmitted signal in sense that to increase resolution of ordinary radar system where consecutive samples are not combined, it is necessary to increase bandwidth of transmitted signal by same factor. Used in FM radar altimeters.

Wu, Chialin↗

Observation of non-drifting radio emissions associated with the intense solar activity in March 1991

Three very unusual radio bursts, separated in time by 4 hours and 35 minute-intervals were observed on March 28, 1991 by the radio and plasma wave (URAP) experiment on the Ulysses spacecraft. Although they are preceded by drifting type III bursts at high frequencies, they show no frequency drift at frequencies from 52 kHz down to 16 kHz. In addition, they have extraordinary sawtooth-like profiles; they have a very rapid exponential rise of about 20 minutes independent of frequency and a much longer nonexponential decay which increases with decreasing frequency. The bursts are interpreted as due to synchrotron emission, which seems to fit many of their characteristics. This radio emission appears to be associated with an expanding source region. However, the observed intensity may be somewhat higher than expected and the possible role of the precursor type III radio bursts in triggering the low frequency non-drifting remains unanswered.

Reiner, M. J.↗

Does a motion base prevent simulator sickness?

The use of high-fidelity motion cues to reduce the discrepancy between visually implied motion and actual motion is tested experimentally using the NASA Vertical Motion Simulator (VMS). Ten pilot subjects use the VMS to fly simulated S-turns and sawtooths which generate a high incidence of motion sickness. The subjects fly the maneuvers on separate days both with and without use of a motion base provided by the VMS, and data are collected regarding symptoms, dark focus, and postural equilibrium. The motion-base condition is shown to be practically irrelevant with respect to the incidence and severity of motion sickness. It is suggested that the data-collection procedure cannot detect differences in sickness levels, and the false cues of the motion condition are theorized to have an adverse impact approximately equivalent to the absence of cues in a fixed-base condition.

Sharkey, Thomas J.↗