Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “reflection data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Surface scattering properties estimated from modeling ASAS multiple emission angle reflectance data over the lunar crater volcanic field, Nevada

ASAS multispectral data were acquired over Lunar Lake playa at 12 different lighting and viewing geometries. Atmospheric models and field-based data demonstrate that atmospheric contributions to ASAS data were relatively small and were thus ignored in analyses of surface photometric properties. ASAS data of an artificially roughened playa and cobble-strewn surfaces exhibit trends of increasing reflectance as phase angle decreases. The reflectance of a natural playa surface exhibits Lambertian scattering properties that cannot be replicated with the Hapke (1986) photometric function. The Hapke model does fit the rough and cobble-strewn playa data with single-scattering albedo, asymmetry factor, and roughness terms consistent with known properties of these surfaces. No published photometric model explains the reflectance variations of all three surfaces.

Guinness, Edward A.↗
NASA NTRS1988

Acquisition of spectral reflectance data using an artificial source of hemispherical illumination

An integrating hemisphere illumination system has been developed to facilitate the collection of spectral reflectance factor measurements of targets of interest in a laboratory environment. One of the most significant advantages associated with such an illumination source is that repeated measurements can be made over an extended period of time, for a variety of targets, under nearly identical illumination and viewing angle conditions. The illumination system consists of a 76 cm (30 in.) aluminum hemisphere coated internally with barium sulfate paint. Illumination is provided by sixteen 62 watt quartz halogen bulbs with tungsten filaments. A simple metal structure has been developed to hold the hemisphere and all peripheral equipment, such as spectrometers, radiometers, and cameras, in place during data collection. The entire set up can be easily disassembled and packed in airline-approved shipping cases to facilitate transportation to laboratory facilities located near any study area. The illumination system is described briefly, and numerous plots of radiance and spectral reflectance are provided to illustrate the performance and utility of the apparatus.

Williams, Darrel L.↗
NASA NTRS1994

VEG: An intelligent workbench for analysing spectral reflectance data

An Intelligent Workbench (VEG) was developed for the systematic study of remotely sensed optical data from vegetation. A goal of the remote sensing community is to infer the physical and biological properties of vegetation cover (e.g. cover type, hemispherical reflectance, ground cover, leaf area index, biomass, and photosynthetic capacity) using directional spectral data. VEG collects together, in a common format, techniques previously available from many different sources in a variety of formats. The decision as to when a particular technique should be applied is nonalgorithmic and requires expert knowledge. VEG has codified this expert knowledge into a rule-based decision component for determining which technique to use. VEG provides a comprehensive interface that makes applying the techniques simple and aids a researcher in developing and testing new techniques. VEG also provides a classification algorithm that can learn new classes of surface features. The learning system uses the database of historical cover types to learn class descriptions of one or more classes of cover types.

Harrison, P. Ann↗
NASA NTRS1992

Testing the Li-Strahler four-component canopy reflectance model in the HAPEX-Sahel shrub savanna sites using ground reflectance data

The rate at which a light field decays in water is characterized by the diffuse attenuation coefficient k. The Li-Strahler discrete-object canopy reflectance model was tested in two sites, a shrub grass savanna and a degraded shrub savanna on bare soil, in the proposed HAPEX (Hydrologic Atmospheric Pilot Experiment) II/Sahel study area in Niger, West Africa. Average site reflectance was predicted for each site from the reflectances and cover proportions of four components: shrub canopy, background (soil or grass and soil), shaded canopy, and shaded background. Component reflectances were sampled in the SPOT wavebands using a hand-held radiometer. Predicted reflectance was compared to average site reflectance measured using the same radiometer mounted on a backpack with measurements recorded every 5 m along two 1-km transects, also in the SPOT (Systeme Probatoire d'Observation de la Terre) bands. Measurements and predictions were made for each of the three days during the summer growing season, approximately two weeks apart. Red, near infrared reflectance, and the NDVI (normalized difference vegetation index) were all predicted with a high degree of accuracy for the shrub/grass site and with reasonable accuracy for the degraded shrub site.

Franklin, J.↗
NASA NTRS1983

A sampling procedure to guide the collection of narrow-band, high-resolution spatially and spectrally representative reflectance data

A multistage sampling procedure using image processing, geographical information systems, and analytical photogrammetry is presented which can be used to guide the collection of representative, high-resolution spectra and discrete reflectance targets for future satellite sensors. The procedure is general and can be adapted to characterize areas as small as minor watersheds and as large as multistate regions. Beginning with a user-determined study area, successive reductions in size and spectral variation are performed using image analysis techniques on data from the Multispectral Scanner, orbital and simulated Thematic Mapper, low altitude photography synchronized with the simulator, and associated digital data. An integrated image-based geographical information system supports processing requirements.

Brand, R. R.↗
NASA NTRS1995

Trend analysis of in-situ spectral reflectance data from the Thermal Control Surfaces Experiment (TCSE)

The Thermal Control Surfaces Experiment (TCSE) on the LDEF was a comprehensive experiment that combined in-space measurements with extensive pre- and post-flight analyses of thermal control surfaces to determine the effects of exposure to the low earth orbit (LEO) space environment. The TCSE is the first space experiment to directly measure in-situ total hemispherical reflectance of thermal control surfaces in the same way they are routinely measured in the laboratory. In-space optical measurements performed by the TCSE provide the unique opportunity for trend analysis of the performance of materials in the space environment. Such trend analysis of flight data offers the potential to develop an empirical life time prediction model for several thermal control surfaces. For material research, trend analysis of the TCSE flight data, particularly the spectral data, can provide insight into the damage mechanisms of space exposure. Trend analysis for the TCSE samples has been limited to those materials that were not significantly eroded by the atomic oxygen (AO) environment. The performance of several materials on the LDEF mission was dominated by AO effects. Trend analysis was performed on both the detailed spectral reflectance measurements (in-space, pre-flight, and post-flight) and on the integrated solar absorptance. Results of this analysis for the five selected TCSE materials are presented along with the spectral flight data. Possible degradation and effects mechanisms will be discussed to better understand and predict the behavior of these materials in the LEO space environment.

Wilkes, Donald R.↗
DOE OSTI2023

Estimating Individual Tree Mortality in the Sierra Nevada Using Lidar and Multispectral Reflectance Data

Widespread tree mortality events occur during periods of severe drought in temperate conifer forests and are expected to become more frequent in many areas due to climate change. Improved mapping of individual tree mortality is needed to identify risk factors and design effective conservation strategies. In this study, we used National Ecological Observatory Network (NEON) lidar and multispectral reflectance airborne observations to map individual tree mortality over a 160 km 2 area during and after the 2012–2016 drought for two sites in California's Sierra National Forest. We used NEON lidar to derive tree locations and crown perimeters and multispectral data to map tree mortality for more than 1 million trees. We found that 25.4% of the trees in our study area died between 2013 and 2017, with considerably higher mortality at the lower-elevation Soaproot Saddle site. Between 2017 and 2019, an additional 2.0%–2.8% of the trees died each year. Two wildfires in 2020 and 2021 increased tree mortality within burned area perimeters by 49%–89% between 2019 and 2021. Consistent with previous work, we found that tree mortality risk increased as a function of tree height. Tree mortality was positively associated with distance from rivers, trees per hectare, and decreasing slope at the lower elevation site. In contrast, increasing slope was positively associated with tree mortality at the higher elevation site. Our approach and dataset provide a means to study the combined effects of drought and wildfire on tree mortality and may improve projections of forest resilience under a changing climate.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Validating first-principles molecular dynamics calculations of oxide/water interfaces with x-ray reflectivity data

Metal oxide/water interfaces play a crucial role in many electrochemical and photocatalytic processes, such as photoelectrochemical water splitting, the creation of fuel from sunlight, and electrochemical CO 2 reduction. First-principles electronic structure calculations can reveal unique insights into these processes, such as the role of the alignment of the oxide electronic energy levels with those of liquid water. An essential prerequisite for the success of such calculations is the ability to predict accurate structural models of these interfaces, which in turn requires careful experimental validation. Here we report a general, quantitative validation protocol for first-principles molecular dynamics simulations of oxide/aqueous interfaces. The approach makes direct comparisons of interfacial x-ray reflectivity (XR) signals from experimental measurements and those obtained from ab initio simulations with semilocal and van der Waals functionals. The protocol is demonstrated here for the case of the Al 2 O 3 (001)/water interface, one of the simplest oxide/water interfaces. We discuss the technical requirements needed for validation, including the choice of the density functional, the simulation cell size, and the optimal choice of the thermodynamic ensemble. Our results establish a general paradigm for the validation of structural models and interactions at solid/water interfaces derived from first-principles simulations. Furthermore, while there is qualitative agreement between the simulated structures and the experimental best-fit structure, direct comparisons of simulated and measured XR intensities show quantitative discrepancies that derive from both bulk regions (i.e., alumina and water) as well as the interfacial region, highlighting the need for accurate density functionals to properly describe interfacial interactions. Our results show that XR data are sensitive not only to the atomic structure (i.e., the atom locations) but also to the electron-density distributions in both the substrate and at the interface.

36 MATERIALS SCIENCE↗
NASA NTRS1987

Causes of spurious features in spectral reflectance data

Several techniques are becoming common in the analysis of imaging spectrometer data that can lead to spurious absorption features or to changes in the position, width, and shape of actual absorption features. It is a common practice to calibrate AIS or other imaging spectrometer data by averaging each pixel along the flight line. The average is used to calibrate the spectral data by dividing the spectrum at each pixel by the average. If some pixels in the data set contain an absorption, then the average will also show an absorption. Some AIS data has had problems with wavelength stability from one scan line to the next which can produce spurious features with some analysis methods. If a pixel has a spectrum with an absorption having a different position or width than the spectrum used in a ratio, then the ratio can produce a spurious absorption at a different position and width than the true absorption feature. An average spectrum ratioed to each pixel will produce band shifts, and changes in width or shape. If continuum removal is performed by substraction rather than division, band positions can also be shifted.

Clark, Roger N.↗
NASA NTRS1991

Application of Hapke photometric model to three geologic surfaces using PARABOLA bidirectional reflection data

The Geologic Remote Sensing Field Experiment (GRSFE) was conducted in July and September of 1989 to collect data with both ground and airborne instrumentation. A major objective of GRSFE was to collect data which could be used to test radiative transfer models for the extraction of composition and textural surface properties from remotely acquired data. Reported here are the initial results from an application of the Hapke photometric model, using data from the Portable Apparatus for Remote Acquisition of Bidirectional Observations of Land and Atmosphere (PARABOLA), a ground based radiometer with three spectral channels. PARABOLA data was collected in the Lunar Crater Volcanic Field in Nevada, specifically from the region of Lunar Lake, a playa. The Hapke model was found to be inadequate for three relatively common geologic surfaces (a clay-rich, hard packed surface with decimeter sized mudcracks; a cobble site, similar to a playa site, but strewn with basaltic cobbles and pebbles; and a surface mantled basalt lava flow). The model is not at fault; rather, the complexity of most geologic surfaces is not accounted for in the initial assumptions.

Shepard, Michael K.↗
NASA NTRS1992

Physical interpretation of thermal and reflected data on Martian surface units

None of the available Viking Orbiter Infrared Thermal Mapper's thermal datasets can be uniquely interpreted in isolation from other data in terms of variations of a single, simple physical parameter of the martian surface. Other thermal datasets of a target area, thermal observations of adjacent materials, and visible and near-infrared observations of the same region can often sufficiently constrain interpretations to obtain one that is nearly unique. The major datasets, their derived information, and their ambiguities are given.

Strickland, Edwin L., III↗
NASA NTRS1993

Analysis of gravity, magnetic, and seismic reflection data from Tibet and neighboring regions of China

Our principal effort was devoted to completing the analysis of the new gravity data over the Tibet plateau and its margins. A paper was completed discussing the statistical relationship between gravity and topography over the plateau. A paper on the structure of the Tarim Basin as constrained by Love wave dispersion is also under completion. This research project has also supported research on the newly-released gravity data from the former Soviet Union.

Mcnutt, Marcia↗
NASA NTRS2002

Mapping Lithologic Units Exposed on the Summit of Mauna Kea Using AVIRIS Hyperspectral Reflectance Data

The Mauna Kea summit region is largely comprised of cinder cones and lava flows that form the cap of the Mauna Kea Volcano. The cones and flows at the summit are part of the Laupahoehoe Volcanic series. The Laupa hoehoe volcanism occurred both during and after the late Pleistocene Makanaka glacial episode at the summit. In addition, a few Laupahoehoe cones have been glacially eroded as evidenced by oversteepened slopes, which suggests that they predate the Makanaka glacial period. Two notable examples of possible preglacial cones are Puu Waiau and Puu Poliahu. These two cones are also significantly altered, most likely by hydrothermal activity that has weakly cemented the materials on the cones. Well-crystalline sulfates (alunite and jarosite), phyllosilicates, and zeolites, have been found in samples collected from altered cones at the summit. In addition, palagonitic tephra, which have nanophase ferric oxide, allophane, and other poorly crystalline forms of weakly altered basaltic glass (i.e., no phyllosilicates), have been described at several locations on Mauna Kea. While several studies have discussed the occurrence of alteration products on Mauna Kea, the distribution of these materials exposed at the summit has not been extensively mapped. Hyperspectral imaging can provide information for identifying and mapping lithologic units containing alteration minerals, such as are found on Mauna Kea. The Airborne Visible Infrared Imaging Spectrometer (AVIRIS) is a hyperspectral imaging instrument that covers the wavelength range from about 0.4 to 2.5 micron in 224 bands, with a band spacing of 10 nm and average band width of 10 nm

Guinness, E. A.↗