Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “reactor type”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Production of edible carbohydrates from formaldehyde in a spacecraft. pH variations in the calcium hydroxide catalyzed formose reaction

The study of the calcium hydroxide catalyzed condensation of formaldehyde was extended to a batch reactor system. Decreases in pH were observed, often in the acid regime, when using this basic catalyst. This observation was shown to be similar to results obtained by others using less basic catalysts in the batch mode. The relative rates of these reactions are different in a batch reactor than in a continuous stirred tank reactor. This difference in relative rates is due to the fact that at any degree of advancement in the batch system, the products have a history of previous products, pH, and dissolved catalyst. The relative rate differences can be expected to yield a different nature of product sugars for the two types of reactors.

Weiss, A. H.↗
NASA NTRS1976

Plasma core reactor applications

Analytical and experimental investigations were conducted to demonstrate the feasibility of fissioning uranium plasma core reactors and to characterize space and terrestrial applications for such reactors. Uranium hexafluoride fuel is injected into core cavities and confined away from the surface by argon buffer gas injected tangentially from the peripheral walls. Radiant heat transfer calculations were performed for a six-cavity reactor configuration. Axial working fluid channels are located along a fraction of each cavity peripheral wall. Results of calculations for outward-directed radiant energy fluxes corresponding to radiating temperatures of 2000 to 5000 K indicate total operating pressures from 80 to 650 atm, centerline temperatures from 6900 to 30,000 K, and total radiated powers from 25 to 2500 MW, respectively. Applications are described for this type of reactor such as (1) high-thrust, high specific impulse space propulsion, (2) highly efficient systems for generation of electricity, and (3) hydrogen or synthetic fuel production systems using the intense radiant energy fluxes.

Latham, T. S.↗
NASA NTRS1975

Analytical and experimental study of two concentric cylinders coupled by a fluid gap

From a structural point of view a liquid coolant type nuclear reactor consists of a heavy steel vessel containing the core and related mechanical components and filled with a hot fluid. This vessel is protected from the severe environment of the core by a shielding structure, the thermal liner, which is usually a relatively thin steel cylinder concentric with the reactor vessel and separated from it by a gap filled with the coolant fluid. This arrangement leads to a potential vibration problem if the fundamental frequency, or one of the higher natural vibration frequencies, of this liner system is close to the frequency of some vibration source present in the reactor vessel. The shell rigidly clamped at its base and free at the top was investigated since it is a better description of the conditions encountered in typical reactor designs.

Mulcahy, T. M.↗
NASA NTRS1976

Chemical vapor deposition growth

A laboratory type CVD reactor system with a vertical deposition chamber and sample pedestal heated by an external RF coil has been extensively modified by installation of mass flow controllers, automatic process sequence timers, and special bellows-sealed air-operated valves for overall improved performance. Various film characterization procedures, including classical metallography, SEM analyses, X ray diffraction analyses, surface profilometry, and electrical measurements (resistivity, carrier concentration, mobility, spreading resistance profiles, and minority-carrier lifetime by the C-V-t method) area used to correlate Si sheet properties with CVD parameters and substrate properties. Evaluation procedures and measurements are given. Experimental solar cell structures were made both in epitaxial Si sheet (on sapphire substrates) and in polycrystalline material on alumina substrates, the former to provide an indication of what might be an upper limit on performance of the latter. Preliminary results are given, as obtained in cell structures not specially designed to allow for the unique properties of the sheet material, and fabricated in material known to be far from optimum for photovoltaic performance. Low power conversion efficiencies have been obtained in the epitaxial as well as the polycrystalline Si sheet.

Ruth, R. P.↗
NASA NTRS1979

University of Illinois nuclear pumped laser program

The development of nuclear pumped lasers with improved efficiency, energy storage capability, and UF6 volume pumping is reviewed. Results of nuclear pumped laser experiments using a TRIGA-type pulsed reactor are outlined.

Miley, G. H.↗
NASA NTRS1988

Kinetics of the reaction OH + HO2 yields H2O + O2 from 254 to 382 K

The discharge-flow resonance fluorescence technique has been used to determine the absolute rate constant for the reaction OH + HO2 yields H2O + O2 from 254 to 382 K at a total pressure of 1 Torr. Pseudo-=first-order conditions were used with HO2 in large excess over OH. The rate constant was obtained directly from observed decays of OH and measured concentrations of HO2. Since the observed rate constant was found to be very sensitive to small background concentrations of O and H atoms, NO2 was used to remove both atom species from the system. With added NO2 the result at 299 K is (1.1 + or - 0.3) x 10 to the -10th cu cm/molecule where the error limits are one standard deviation and include an estimate of overall experimental uncertainty. The temperature dependence expressed in Arrhenius form is (4.8 + or - 0.8) x 10 to the -11th exp (250 + or - 50)/T. The results are independent of the type of reactor surface and the precursor used to produce OH and HO2. The present results agree well with earlier measurements near 1-atm total pressure and suggest that this rate constant exhibits little or no pressure dependence between 1 and 1000 Torr.

Keyser, Leon F.↗
NASA NTRS1991

Updated solid-core nuclear thermal propulsion engine trades

This study examined the application of state-of-the-art propulsion and reactor technologies to a near-term solid-core NERVA-based nuclear thermal propulsion system. Updated reactor performance and weight scaling laws were initially derived and input into a nuclear rocket engine system cycle design analysis code. Nuclear Thermal Propulsion (NTP) engine system weight, size, and performance are presented here for a large range of chamber pressures, nozzle area ratios, and thrust levels for three reactor fuel types operating at their corresponding temperatures. Operational characteristics and design features of representative NTP engine concepts are also presented.

Pelaccio, Dennis G.↗
NASA NTRS2001

Inductive Measurement of Plasma Jet Electrical Conductivity (MSFC Center Director's discretionary Fund)

Measurement of plasma jet electrical conductivity has utility in the development of explosively driven magnetohydrodynamic (MHD) energy converters as well as magnetic flux compression reaction chambers for nuclear/chemical pulse propulsion and power. Within these types of reactors, the physical parameter of critical importance to underlying MHD processes is the magnetic Reynolds number, the value of which depends upon the product of plasma electrical conductivity and velocity. Therefore, a thorough understanding of MHD phenomena at high magnetic Reynolds number is essential, and methods are needed for the accurate and reliable measurement of electrical conductivity in high-speed plasma jets. It is well known that direct measurements using electrodes suffer from large surface resistance, and an electrodeless technique is desired. To address this need, an inductive probing scheme, originally developed for shock tube studies, has been adapted. In this method, the perturbation of an applied magnetic field by a plasma jet induces a voltage in a search coil, which, in turn, can be used to infer electrical conductivity through the inversion of a Fredholm integral equation of the first kind. A 1-in.-diameter probe using a light-gas gun. Exploratory laboratory experiments were carried out using plasma jets expelled from 15-g shaped charges. Measured conductivities were in the range of 4 kS/m for unseeded octol charges and 26 kS/m for seeded octol charges containing 2-percent potassium carbonate by mass.

Turner, M. W.↗
NASA NTRS2021

Supercritical Water Oxidation (SCWO) Trade Study and 2021 Final Report

SCWO is a promising technology whose main benefits is that it is capable of completely mineralizing organic compounds in wastewater and separating inorganic salts. This means that SCWO can theoretically function as a single step water treatment system. It performs the functions of both the primary treatment system and the secondary brine drying function to achieve near 100% water recovery. It can also handle solids so no pretreatment of the feed is required. A preliminary trade study indicates that SCWO could be competitive with the ISS state of the art if its power consumption could be reduced. Thermal and mechanical energy recovery system exist that could reduce SCWO energy consumption to a level that is competitive with the state of the art. In addition, increasing the feed wastewaters organic content by including other wastes, such as feces, could produce a reactor that is thermally self-sustaining. There are 5 different types of SCWO reactors. They are; tubular, tank, impingement, transpiring wall reactors (TWR) and super critical water mixing (SCWM) reactors. Of these the best suited for NASA missions are the impingement and SCWM reactors. The impingement reactor is best suited for near term missions because it can treat the low organic content wastewaters such as are expected for initial Lunar and Mars missions and has the ability to remove precipitated inorganic solids. The SCWM reactor is best suited for longer duration CELSS type missions where high organic content wastewater is available and will resolve solids fouling and corrosion issues. In addition, these two reactors have a long NASA heritage and have been developed specifically for space flight application. Tubular reactors suffer from plugging issues which is a safety concern. Tank reactors will increase in size inversely with gravity, which will trade poorly in Lunar and Mars environments where gravity is reduced. TWR reactors require high organic content wastewater feed and the SCWM reactor is an optimized version of the TWR for NASA applications. It is recommended that in FY 2022 NASA continue to fully evaluate the ability of SCWO to produce potable water and remove inorganics as a solid byproduct. This should be done using the impingement reactor for near term missions and SCWM for longer duration missions. NASA should also develop optimized recuperative heat exchangers and pressure recovery devices to reduce power consumption and investigate inclusion of feces and other organic wastes into the wastewater model to increase its organic content and further reduce thermal energy requirements.

Supercritical Water Oxidation↗
NASA NTRS1971

Rotating Fluidized Bed Reactor for Space Nuclear Propulsion: Design Studies and Experimental Results - Annual Report

The rotating fluidized bed reactor concept is being investigated for possible application in nuclear propulsion systems. Physics calculations show U-233 to be superior to U-235 as a fuel for a cavity reactor of this type. Preliminary estimates of the effect of hydrogen in the reactor, reflector material, and power peaking are given. A preliminary engineering analysis was made for U-235 and U-233 fueled systems. An evaluation of the parameters affecting the design of the system is given, along with the thrust-to-weight ratios. The experimental equipment is described, as are the special photographic techniques and procedures. Characteristics of the fluidized bed and experimental results are given, including photographic evidence of bed fluidization at high rotational velocities.

Source record↗
NASA NTRSDate not supplied

Accessing Icy World Oceans using Lattice Confinement Fusion Fast Fission

Exploring the oceans of icy moons and planets requires a robust robotic probe powered by an energy source that can operate under icy world ocean conditions and be self-contained. We propose a non-fissile, compact, scalable nuclear energy source to electrically power untethered, autonomous probes to melt or bore through icy world crusts. The probe can be used for planetary (i.e. Pluto, lunar (i.e., Europa), or asteroid exploration (i.e. Ceres) where ice caps are encountered. This new approach may yield a variable output fission power source with a higher performance than 238Pu and a non-fissile alternative to a highly enriched uranium (HEU) core. This approach saves uranium enrichment expense, and both HEU and 238Pu security and launch safety costs. The reactor will produce electrical power with thermal waste heat to melt through the ice crust with possible sonic assistance. This paper will introduce the hybrid fusion-fission reactor concept, explore the potential for and benefits of this new type of nuclear reactor, and discuss the technical approach to developing this new technology.

Theresa L Benyo↗
NASA NTRS1960

A Coaxial Flow Reactor - A Gaseous Nuclear-Rocket Concept

Aspects of a new gaseous nuclear-rocket concept are considered. The principle of this type of cavity reactor is one of maintaining the separation of two coaxial streams - fuel within propellant - rather than attaining the separation of fuel propellant gases within the cavity. An acceptably low uranium consumption rate is possible if the fuel stream can be maintained at an axial velocity which is 1/100 to 1/1000 of the propellant velocity. An elementary hydrodynamic analysis for laminar incompressible flow indicates that the average uranium core velocity may only reach 2 to 11 times the initial core velocity for a typical reactor. The results of a 1-D criticality analysis for a D2O/(235)U system show that the effect of shrinking the fuel region within the reactor cavity is not serious; the effects of moderator heating and structural materials on critical mass are also shown. Overall rocket performance calculations are made for reasonable operating conditions; these results indicate that thrusts from 25,000 to 50,000 pounds and accelerations from 10(exp -1) to 3 g are possible.

Robert G Ragsdale↗
NASA NTRS2023

Accessing Icy Worlds Using Lattice Confinement Fusion (LCF) Fast Fission

Exploring the oceans of icy moons and planets requires a robust robotic probe powered by an energy source that can operate under icy world ocean conditions and be self-contained. We propose a non-fissile, compact, scalable nuclear energy source to electrically power untethered, autonomous probes to melt or bore through icy world crusts. The probe can be used for planetary (i.e. Pluto, lunar (i.e., Europa), or asteroid exploration (i.e. Ceres) where ice caps are encountered. This new approach may yield a variable output fission power source with a higher performance than 238Pu and a non-fissile alternative to a highly enriched uranium (HEU) core. This approach saves uranium enrichment expense, and both HEU and 238Pu security and launch safety costs. The reactor will produce electrical power with thermal waste heat to melt through the ice crust with possible sonic assistance. This NIAC funded proposal and presentation will introduce the hybrid fusion-fission reactor concept applied to the Saturnian moon, Enceladus, explore the potential for and benefits of this new type of nuclear reactor, and discuss applying this new technology.

Icy Worlds↗
NASA NTRS1985

Turbulent flow model for vapor collection efficiency of a high-purity silicon reactor

In this study a mathematical model and a computer code based on this model was developed to allow prediction of the product distribution in chemical reactors for converting gaseous silicon compounds to condensed-phase silicon. Specifically, the model formulated describes the silicon vapor separation/collection from the developing turbulent flow stream within reactors of the Westinghouse type. Migration of the silicon vapor to the reactor walls was described by the parametric solutions presented here, in order to reduce the experimentation necessary in the design of such reactors. Calculations relating to the collection efficiencies of such reactors are presented as a function of the reactor throughflow and distance along its length.

Srivastava, R.↗
NASA NTRS2012

Small Fast Spectrum Reactor Designs Suitable for Direct Nuclear Thermal Propulsion

Advancement of U.S. scientific, security, and economic interests through a robust space exploration program requires high performance propulsion systems to support a variety of robotic and crewed missions beyond low Earth orbit. Past studies, in particular those in support of the Space Exploration Initiative (SEI), have shown nuclear thermal propulsion systems provide superior performance for high mass high propulsive delta-V missions. The recent NASA Design Reference Architecture (DRA) 5.0 Study re-examined mission, payload, and transportation system requirements for a human Mars landing mission in the post-2030 timeframe. Nuclear thermal propulsion was again identified as the preferred in-space transportation system. A common nuclear thermal propulsion stage with three 25,000-lbf thrust engines was used for all primary mission maneuvers. Moderately lower thrust engines may also have important roles. In particular, lower thrust engine designs demonstrating the critical technologies that are directly extensible to other thrust levels are attractive from a ground testing perspective. An extensive nuclear thermal rocket technology development effort was conducted from 1955-1973 under the Rover/NERVA Program. Both graphite and refractory metal alloy fuel types were pursued. Reactors and engines employing graphite based fuels were designed, built and ground tested. A number of fast spectrum reactor and engine designs employing refractory metal alloy fuel types were proposed and designed, but none were built. The Small Nuclear Rocket Engine (SNRE) was the last engine design studied by the Los Alamos National Laboratory during the program. At the time, this engine was a state-of-the-art graphite based fuel design incorporating lessons learned from the very successful technology development program. The SNRE was a nominal 16,000-lbf thrust engine originally intended for unmanned applications with relatively short engine operations and the engine and stage design were constrained to fit within the payload volume of the then planned space shuttle. The SNRE core design utilized hexagonal fuel elements and hexagonal structural support elements. The total number of elements can be varied to achieve engine designs of higher or lower thrust levels. Some variation in the ratio of fuel elements to structural elements is also possible. Options for SNRE-based engine designs in the 25,000-lbf thrust range were described in a recent (2010) Joint Propulsion Conference paper. The reported designs met or exceeded the performance characteristics baselined in the DRA 5.0 Study. Lower thrust SNRE-based designs were also described in a recent (2011) Joint Propulsion Conference paper. Recent activities have included parallel evaluation and design efforts on fast spectrum engines employing refractory metal alloy fuels. These efforts include evaluation of both heritage designs from the Argonne National Laboratory (ANL) and General Electric Company GE-710 Programs as well as more recent designs. Results are presented for a number of not-yet optimized fast spectrum engine options.

Schnitzler, Bruce G.↗
NASA NTRS1971

Shuttle APS propellant thermal conditioner study

The conditioner design concept selected for evaluation consists of an integral reactor and baffle-type heat exchanger. Heat exchange is accomplished by flowing reactor hot gases past a series of slotted and formed plates, through which the conditioned propellant flows. Heat transfer analysis has resulted in the selection of a reactor hot gas nominal mixture ratio of 1.0, giving a combustion temperature of 1560 F with a hydrogen inlet temperature of 275 R. Worst case conditions result in a combustion gas temperature of 2060 F, satisfying the condition of no damage to the conditioner in case of failure to flow cold fluid. In addition, evaluation of hot gas flow requirements and conditioner weight has resulted in the selection of a reactor hot gas exhaust temperature of 750 R.

Fulton, D. L.↗
NASA NTRS1973

Catalog of experimental projects for a fissioning plasma reactor

Experimental and theoretical investigations were carried out to determine the feasibility of using a small scale fissioning uranium plasma as the power source in a driver reactor. The driver system is a light water cooled and moderated reactor of the MTR type. The eight experiments and proposed configurations for the reactor are outlined.

Lanzo, C. D.↗
NASA NTRS1972

Selection and use of TLDS for high precision NERVA shielding measurements

An experimental evaluation of thermoluminescent dosimeters was performed in order to select high precision dosimeters for a study whose purpose is to measure gamma streaming through the coolant passages of a simulated flight type internal NERVA reactor shield. Based on this study, the CaF2 chip TLDs are the most reproducible dosimeters with reproducibility generally within a few percent, but none of the TLDs tested met the reproducibility criterion of plus or minus 2%.

Woodsum, H. C.↗