Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “random projection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Model-based Reconstruction for Single Particle Cryo-Electron Microscopy

Single particle cryo-electron microscopy is a vital tool for 3D characterization of protein structures. A typical workflow involves acquiring projection images of a collection of randomly oriented particles, picking and classifying individual particle projections by orientation, and finally using the individual particle projections to reconstruct a 3D map of the electron density profile. The reconstruction is challenging because of the low signal-to-noise ratio of the data, the unknown orientation of the particles, and the sparsity of data especially when dealing with flexible proteins where there may not be sufficient data corresponding to each class to obtain an accurate reconstruction using standard algorithms. In this paper we present a model-based image reconstruction technique that uses a regularized cost function to reconstruct the 3D density map by assuming known orientations for the particles. Our method casts the reconstruction as minimizing a cost function involving a novel forward model term that accounts for the contrast transfer function of the microscope, the orientation of the particles and the center of rotation offsets. We combine the forward model term with a regularizer that enforces desirable properties in the volume to be reconstructed. Using simulated data, we demonstrate how our method can significantly improve upon the typically used approach.

Venkatakrishnan, Singanallur↗
NASA NTRS1992

Network problem threshold

Network transmission errors such as collisions, CRC errors, misalignment, etc. are statistical in nature. Although errors can vary randomly, a high level of errors does indicate specific network problems, e.g. equipment failure. In this project, we have studied the random nature of collisions theoretically as well as by gathering statistics, and established a numerical threshold above which a network problem is indicated with high probability.

Gejji, Raghvendra, R.↗
DOE OSTI2025

The polarized-signal density matrix: A practical way to recover molecular frame information from isotropic samples

We present a novel approach to model ultrafast time-dependent nonlinear optical polarization sensitive signals emitted from randomly oriented molecules. By projecting the laboratory-frame analyzer polarization axis into the molecular-frame and linking that axis with the density matrix through a tensor product, we demonstrate an approach to find a specific molecular orientation that yields a good approximation to simulated four-wave mixing signals produced by the same model but with averaging over molecular orientation.

Thurston, Richard L↗
DOE OSTI2021

Novel In-situ Patterning Technique to Fabricate Single Quantum Dots for Quantum Photonics

Photon sources able to emit single or entangled photon pairs are key components in quantum information systems. Semiconductor quantum dots (QDs) are promising candidates due to their high efficiencies and ease of integration with other photonic or electronic components. State-of-the-art QDs, however, are limited to certain emission wavelengths and specific applications due to material choice constraints and their randomness in shape/size. This project is focused on developing a novel in-situ patterning technique to realize QDs with a broad emission range, shape/size control and the ability to emit single/entangled photons. Our approach has two key elements: (1) In-situ patterning via arsenic-induced nanovoid etching on antimonide surfaces and (2) In-filling of nanovoids to form QDs. By closely controlling the experimental conditions, it is shown that this technique can be used to realize III-V QDs in As 2 - etched nanovoids on a GaSb surface. The exposure to As 2 in terms of substrate temperature, time and flux is found to have a significant impact on the process variables such as nanovoid depth, QD dimensions etc. An in-depth analysis of the etch mechanism reveals that by controlling the As 2 exposure, uniform 3-dimensional nanostructures with varying areal densities can be obtained without an in-filling step. Preliminary optical characterization of these nanostructures shows that these QDs may be relevant for realizing emitters in the telecom wavelength range.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1974

Engineering studies related to the GEOS-C radar altimeter

Experiment requirements, technical characteristics, and GEOS-C radar altimeter related analyses are discussed along with results of a study on engineering test data requirements. Statistical analyses related to determination of wave height resolution achievable as a function of system characteristics and averaging period are described, in addition to a discussion on the desirability of using computer procedures to compensate for altitude tracker time-jitter. Data processing considerations for the GEOS-C system are examined. An extensive analysis of the spatial filter effect is given and results of a computation of geoidal power spectral density, based on Skylab altimeter data, is displayed and interpreted in terms of projected GEOS-C random errors. This information is then used in deriving minimum-mean-square filter procedures for both geoid undulation and slope data. The characteristics of mean received waveforms as a function of off-nadir angle are used to obtain tracker bias as a function of sea state and pointing angle. The angle estimation process proposed by the GEOS-C hardware contractor is also investigated from a standpoint of achievable angular resolution.

Miller, L. S.↗
DOE OSTI2026

Yet Another NLA Library: T-LAPACK

In recent years, Randomized numerical linear algebra (RandNLA) proved to be more than a theoretical novelty: projects like RandLAPACK demonstrate its practical value across architectures, and projects like RandBLAS build trust in randomization as a tool for high-performance NLA. This BoF considers two main questions. First, what are the pressing issues in software standards and implementation that need to be resolved for RandNLA to become a core component of HPC? Second, how can we mobilize a community effort to make progress on these issues? The BoF will engage the audience to discuss the idea of growing the role of RandNLA in high-performance computing and what it would take to scale from niche prototypes to robust, production-quality software libraries.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Clusters have edges: the projected phase-space structure of SDSS redMaPPer clusters

ABSTRACT We study the distribution of line-of-sight velocities of galaxies in the vicinity of Sloan Digital Sky Survey (SDSS) red-sequence Matched-filter Probabilistic Percolation (redMaPPer) galaxy clusters. Based on their velocities, galaxies can be split into two categories: galaxies that are dynamically associated with the cluster, and random line-of-sight projections. Both the fraction of galaxies associated with the galaxy clusters, and the velocity dispersion of the same, exhibit a sharp feature as a function of radius. The feature occurs at a radial scale Redge ≈ 2.2Rλ, where Rλ is the cluster radius assigned by redMaPPer. We refer to Redge as the ‘edge radius’. These results are naturally explained by a model that further splits the galaxies dynamically associated with a galaxy cluster into a component of galaxies orbiting the halo and an infalling galaxy component. The edge radius Redge constitutes a true ‘cluster edge’, in the sense that no orbiting structures exist past this radius. A companion paper tests whether the ‘halo edge’ hypothesis holds when investigating the full three-dimensional phase-space distribution of dark matter substructures in numerical simulations, and demonstrates that this radius coincides with a suitably defined splashback radius.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Self-assembly of cocontinuous nanostructured copolymer templates with compositional and architectural dispersity. Final Report

Cocontinuous nanostructured materials in which multiple domains of different materials simultaneously span three dimensional space offer opportunities to achieve combined properties not possible with a single homogeneous material. These architectures have importance in a broad range of energy-relevant technologies including batteries, supercapacitors, fuel cells, separation membranes, and catalysts. Achieving such structures in polymeric materials has been of long-standing interest in the field, due to both the inherently attractive properties of cocontinuous polymer morphologies as well as their ability to serve as templates for other functional nanostructured materials. Our work on this project has established that randomly-linked polymer architectures constructed from two immiscible polymer strands provide robust and highly tunable approaches to disordered cocontinuous nanostructures. In particular, we developed a detailed understanding of how the parameters (linker functionality and strand length, asymmetry, and dispersity) of randomly-linked networks controlled the breadth of the cocontinuous window over which both phases remain percolated. We further characterized how these nanostructures undergo orientation, while retaining cocontinuity, under mechanical deformation. We also compared their behavior to that of random multi-block polymers of linear architecture, which show similar propensity to form disordered nanostructures, albeit over narrower ranges of parameter space. Finally, we have explored the development of functional polymer nanostructures and composites based in part on the fundamental understanding obtained via this project.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Using Behavioral Science to Target LMI and High-Value Solar Installations (Final Technical Report)

This project is a data-driven analysis of approaches to facilitate solar adoption in LMI communities and areas with high potential benefits to the electric grid. The cornerstone of the project was two waves of randomized field experiments. The first wave involved novel approaches to reaching LMI communities based on insights from literature. The second wave involved areas of high potential of solar to the electricity grid, as determined in collaboration with the local utilities in Connecticut. Both waves were followed by surveys to develop insight into the effectiveness of different approaches. A third key element of the project is the development of new agent-based models of solar energy diffusion that explicitly incorporate the real spatial and temporal constraints that influence solar diffusion, based on real-world data on solar adoption. The project also involved outreach and dissemination of key findings to relevant stakeholders, including a guidebook on strategies to accelerate solar deployment to low and moderate income communities, multiple academic publications, and numerous presentations of the research findings.

14 SOLAR ENERGY↗
DOE OSTI2025

Ensemble Simulation Techniques and Fast Randomized Algorithms

The major goals of the project were to develop and analyze new ensemble simulation techniques, including trajectory stratification and preconditioned MCMC techniques, as well as develop fast numerical linear algebra techniques closely related to ensemble simulation ideas. The trajectory stratification techniques involve simulating in parallel short trajectory fragments of a Markov process confined to a specific region of space‐time and then patching together the statistics gathered to assemble estimates of very general dynamical properties. We have also developed this approach for rare event simulation and extended the techniques to applications requiring a more general framework (such as electronic structure calculations). The preconditioned MCMC techniques involve simulating multiple Markov chains in parallel and then using information from the ensemble to speed the mixing of each individual chain. The fast randomized linear algebra methods are motivated by the diffusion Monte Carlo technique, but are applicable to finding the dominant eigenvalue of (almost) general matrices. For most non‐negative matrices, the schemes result in an error (compared to the power method) that is constant in the dimension of the problem. For more general matrices, we see a very clear sublinear cost trend in computational tests.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Machine learning and process-based modeling of spatiotemporal changes in active layer thickness across Alaska

Permafrost degradation poses a growing threat to infrastructure stability and ecosystem resilience in the rapidly warming Arctic. We investigated the spatiotemporal dynamics of active layer thickness (ALT) across Alaska by integrating field observations, environmental datasets, a physically based Stefan model, and machine learning (ML) techniques. Using weather projections from the Coupled Model Intercomparison Project Phase 6 under two Shared Socioeconomic Pathways (SSP 2-4.5 and SSP 5-8.5), we assessed ALT sensitivity to projected future weather conditions. The random forest (RF) model outperformed the Stefan approach in predicting ALT on the training dataset (R² = 0.84 vs. 0.53) but demonstrated lower generalizability on the test dataset (R² = 0.24 vs. 0.54). The root mean square error (RMSE) for the RF model for training and testing ranged from 14 to 22 cm, compared to 17 and 18 cm for the Stefan model. Variable importance analysis revealed that mean annual temperature and slope angle were the strongest predictors of ALT, accounting for 19% and 18% of the variance, respectively, followed by sediment transport index (14%) and stream power index (11%). Comparative analysis of baseline ALT predictions showed the Stefan model tended to project a thicker active layer (mean ± SD: 65 ± 16 cm), compared to the RF model (mean ± SD: 59 ± 8.8) cm). Both models indicated a latitudinal gradient in ALT, with shallower depths at higher latitudes. Projected ALT increases by 2100 were estimated at 3.3 ± 2.2 cm under SSP 2-4.5 and 5.9 ± 4.0 cm under SSP 5-8.5 for the ML model, whereas the Stefan model projected substantially larger increases of 13 ± 2.6 cm (SSP 2-4.5) and 28 ± 4.4 cm (SSP5-8.5). Spatial analysis showed the greatest ALT increases in northern Alaska, with relatively smaller changes in southern regions. These findings highlight the complex, multifactorial nature of ALT dynamics and the value of hybrid modeling approaches. As rising temperatures accelerate permafrost thaw, changes in ALT can disrupt ecosystems, damage infrastructures, and enhance the release of stored soil carbon, highlighting the urgent need for improved predictive capabilities to inform adaptation strategies in the Arctic.

Climate sciences↗
DOE OSTI2026

Coherence-Induced Deep Thermalization Transition in Random Permutation Quantum Dynamics

We report a phase transition in the projected ensemble—the collection of postmeasurement wave functions of a local subsystem obtained by measuring its complement. The transition emerges in systems undergoing random permutation dynamics, a type of quantum time evolution wherein computational basis states are shuffled without creating superpositions. It separates a phase exhibiting deep thermalization, where the projected ensemble is distributed over Hilbert space in a maximally entropic fashion (Haar random), from a phase where it is minimally entropic (“classical bit-string ensemble”). Crucially, this deep thermalization transition is invisible to the subsystem’s density matrix, which always exhibits thermalization to infinite temperature across the phase diagram. Through a combination of analytical arguments and numerical simulations, we show that the transition is tuned by the total amount of injected by the input state and the measurement basis, and is exhibited robustly across different microscopic models. Our findings represent a novel form of ergodicity-breaking universality in quantum many-body dynamics, characterized not by a failure of regular thermalization, but rather by a failure of deep thermalization.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS2005

Probabilistic Reasoning for Plan Robustness

A planning system must reason about the uncertainty of continuous variables in order to accurately project the possible system state over time. A method is devised for directly reasoning about the uncertainty in continuous activity duration and resource usage for planning problems. By representing random variables as parametric distributions, computing projected system state can be simplified in some cases. Common approximation and novel methods are compared for over-constrained and lightly constrained domains. The system compares a few common approximation methods for an iterative repair planner. Results show improvements in robustness over the conventional non-probabilistic representation by reducing the number of constraint violations witnessed by execution. The improvement is more significant for larger problems and problems with higher resource subscription levels but diminishes as the system is allowed to accept higher risk levels.

autonomous planning↗
DOE OSTI2024

Polynomial chaos expansions on principal geodesic Grassmannian submanifolds for surrogate modeling and uncertainty quantification

In this work we introduce a manifold learning-based surrogate modeling framework for uncertainty quantification in high-dimensional stochastic systems. Our first goal is to perform data mining on the available simulation data to identify a set of low-dimensional (latent) descriptors that efficiently parameterize the response of the high-dimensional computational model. To this end, we employ Principal Geodesic Analysis on the Grassmann manifold of the response to identify a set of disjoint principal geodesic submanifolds, of possibly different dimension, that captures the variation in the data. Since operations on the Grassmann require the data to be concentrated, we propose an adaptive algorithm based on Riemannian K-means and the minimization of the sample Fréchet variance on the Grassmann manifold to identify “local” principal geodesic submanifolds that represent different system behavior across the parameter space. Polynomial chaos expansion is then used to construct a mapping between the random input parameters and the projection of the response on these local principal geodesic submanifolds. Here, the method is demonstrated on four test cases, a toy-example that involves points on a hypersphere, a Lotka-Volterra dynamical system, a continuous-flow stirred-tank chemical reactor system, and a two-dimensional Rayleigh-Bénard convection problem.

42 ENGINEERING↗
DOE OSTI2021

Investigation of Rocket Effect in BRC 18 using Gaia EDR3

ABSTRACT Bright-rimmed clouds (BRCs) are ideal candidates to study radiation-driven implosion mode of star formation as they are potential sites of triggered star formation, located at the edges of Hii regions, showing evidence of ongoing star formation processes. BRC 18 is located towards the eastern edge of relatively closer (∼400 pc) H ii region excited by λ Ori. We made R-band polarimetric observations of 17 candidate young stellar objects (YSOs) located towards BRC 18 to investigate any preferred orientation of the discs with respect to the ambient magnetic field and the direction of energetic photons from λ Ori. We found that the discs are oriented randomly with respect to the projected magnetic field. Using distances and proper motions from the Gaia EDR3 of the candidate YSOs, we investigated the possible acceleration of BRC 18, away from λ Ori due to the well-known ‘Rocket Effect’, by assuming that both the candidate YSOs and BRC 18 are kinematically coupled. The relative proper motions of the candidate YSOs are found to show a trend of moving away from λ Ori. We computed the offset between the angle of the direction of the ionization front and the relative proper motion of the candidate YSOs and found it to lie close to being parallel to each other. Additionally, we found 12 sources that are co-moving with the known candidate YSOs towards BRC 18. These co-moving sources are most likely to be young and are missed in previous surveys conducted to identify potential YSOs of the region.

Saha, Piyali (ORCID:0000000200281354)↗
DOE OSTI2023

Gamma Spectrometry Code Rodeo for Uranium Enrichment—FY 2022 Report

In the first two quarters of FY22, data acquisition continued at ORNL and LLNL using uranium sources of known enrichments. This was an FY21 task which could not be completed in FY21 because of problems encountered with the ORNL M400 CZT in Q4 of FY21, and the subsequent repairs. The detector was received back from H3D in the first of September 2021 , and the measurements resumed . Measurements using the repaired detector were completed in Q1 of FY22. The spectra were distributed by ORNL to the analyzing labs. Analysis results were received in Q2 of FY2022. The results from the various codes were intercompared and an ANOVA analysis was performed. Random and systematic uncertainties were established for each code. The ANOVA results and discussions were included in a revised version of FY21Annual Report issued in March 2022. A paper was presented at the INMM 2022Annual Conference, with the analysis results from the various isotopic codes, and the ANOVA table with random and systematic uncertainties. The Project Work Plan (PWP) for FY22 included a task to perform field testing of the M400 CZT and the analysis codes using UF 6 cylinder measurements at the Framatome Fuel Fabrication Facility in Richland, WA. PNNL was the lead for the field testing task. PNNL drafted a Field Test Plan, and refined it based on comments received from the team. PNNL coordinated with Framatome facility, the logistics of carrying out the field testing . A collimator and shield made out of TFlex (tungsten impregnated polymer) was designed and professionally manufactured. The collimators were used in the field test measurements. The measurements at Framatome were completed on April 21, 2022. A total of 34 Type 30B cylinders were measured using three M400 detectors (PNNL, LLNL, and ORNL detectors). Measurements using M400 were taken at two locations on the side of each cylinder and from the end-on bottom location. Additionally, HPGe measurements were taken at the end-on location to establish ground truth. Cylinder wall thickness measurements were also made at all three locations. To gain a better understanding of the effect of background from surrounding cylinders, the same five cylinders measured individually in low background locations were measured again in the cylinder storage yards. Due to inclement weather, manufacturer delays, shipping delays, and equipment failure, the measurement campaign spanned twice as long compared to the original timeline. Gamma-ray spectra from M400 and HPGe detectors, along with the cylinder data and photographs were organized and shared with the collaborators for further analysis. Spectra were analyzed by the participating laboratories. FY22 PWP also consists of tasks related to plutonium source measurements, adapting the codes to analyze plutonium spectra, and inter-comparison of the results from various codes. Plutonium spectra are being acquired at LANL, ORNL, and LLNL. LANL, SNL and LLNL are in the process of modifying FRAM, GADRAS, and CZTU, respectively. The plutonium related tasks will be completed in Q2 of FY23.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
NASA NTRS1992

Recognition and characterization of hierarchical interstellar structure. II - Structure tree statistics

A new method of image analysis is described, in which images partitioned into 'clouds' are represented by simplified skeleton images, called structure trees, that preserve the spatial relations of the component clouds while disregarding information concerning their sizes and shapes. The method can be used to discriminate between images of projected hierarchical (multiply nested) and random three-dimensional simulated collections of clouds constructed on the basis of observed interstellar properties, and even intermediate systems formed by combining random and hierarchical simulations. For a given structure type, the method can distinguish between different subclasses of models with different parameters and reliably estimate their hierarchical parameters: average number of children per parent, scale reduction factor per level of hierarchy, density contrast, and number of resolved levels. An application to a column density image of the Taurus complex constructed from IRAS data is given. Moderately strong evidence for a hierarchical structural component is found, and parameters of the hierarchy, as well as the average volume filling factor and mass efficiency of fragmentation per level of hierarchy, are estimated. The existence of nested structure contradicts models in which large molecular clouds are supposed to fragment, in a single stage, into roughly stellar-mass cores.

Houlahan, Padraig↗
NASA NTRS2021

Western Montana Ecological Forecasting: Modeling Habitat Suitability of Mustelid Species to Guide Detection Dog Surveys for Contaminants Monitoring, via Collected Scats in River Systems of Western Montana

Environmental contaminants are becoming increasingly prevalent in riverine ecosystems. The status of contaminants in western Montana’s relatively pristine river systems is largely unknown. Monitoring for heavy metals, brominated flame-retardants (BFRs), and pharmaceuticals is important due to their negative effects on ecosystems. Exposure to these contaminants can have significant endocrine, neurological, and reproductive effects. Contaminants easily travel up the food chain and bioaccumulate in apex predators. As predators with a largely aquatic diet, American mink (Mustela vison) and North American river otter (Lontra canadensis) serve as reliable indicator species of environmental health and the status of contaminants. Analysis of scat from these species is a noninvasive method to measure contaminant levels, and detection dogs from Working Dogs for Conservation (WD4C) have been used to locate these scat samples. To aid in the search of these samples, habitat suitability models were created for mink and otter for the years 2013-2020 and projected to 2040 using the random forest algorithm in the Software for Assisted Habitat Modeling (SAHM). Predictor variable data were acquired from Landsat 8 Operational Land Imager (OLI), Terra Moderate Resolution Imaging Spectroradiometer (MODIS), Global Precipitation Measurement Integrated Multi-satellite Retrievals for GPM (GPM IMERG), Shuttle Radar Topography Mission (SRTM), and Soil Moisture Active Passive (SMAP). Within these models, the most important variable for mink and otter habitat was distance to river. Suitable habitat also corresponded with emergent herbaceous land cover and deeper river locations. These habitat suitability models will inform sampling site section for further contaminant analysis.

Anna Winter↗