SEARCH · Engineering Papers

Results for “power flow equation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

NASA NTRS1985

Estimating unsteady aerodynamic forces on a cascade in a three-dimensional turbulence field

An analytical method has been developed to estimate the unsteady aerodynamic forces caused by flow field turbulence on a wind tunnel turning vane cascade system (vane set). This method approximates dynamic lift and drag by linearly perturbing the appropriate steady state force equations, assuming that the dynamic loads are due only to free stream turbulence and that this turbulence is homogeneous, isotropic, and Gaussian. Correlation and unsteady aerodynamic effects are also incorporated into the analytical model. Using these assumptions, equations relating dynamic lift and drag to flow turbulence, mean velocity, and vane set geometry are derived. From these equations, estimates for the power spectra and rms (root mean squared value, delta) loading of both lift and drag can be determined.

Norman, T.↗

NASA NTRS1985

Convergence acceleration of iterative solutions of Euler equations for transonic flow computations

In this paper, two acceleration techniques for Euler calculations are investigated. The first technique is an extrapolation procedure based on the Power Method; it is applicable when the iterative matrix has dominant eigenvalues. Both real and complex conjugate roots are allowed. The second technique is a generalization of the Minimal Residual Method, where the extrapolation step consists of a weighted combination of the corrections at different iteration levels and the weights are chosen to minimize the Lz norm of the residual. Numerical results, using Jameson's Runge-Kutta Multigrid Code, are presented. The extra computational work to apply either technique is negligible and the extra storage is not a problem on current supercomputers.

Hafez, M.↗

NASA NTRS1986

Estimating unsteady aerodynamic forces on a cascade in a three-dimensional turbulence field

An analytical method has been developed to estimate tne unsteady aerodynamic forces caused by flow field turbulence on a wind tunnel turning vane cascade system (vane set). This method approximates dynamic lift and drag by linearly perturbing the appropriate steady state force equations, assuming that the dynamic loads are due only to free stream turbulence and that this turbulence is homogeneous, isotropic, and Gaussian. Correlation and unsteady aerodynamic effects are also incorporated into the analytical model. Using these assumptions, equations relating dynamic lift and drag to flow turbulence, mean velocity, and vane set geometry are derived. From these equations, estimates for the power spectra and rms (root mean squared value, delta) loading of both lift and drag can be determined.

Norman, T. R.↗

NASA NTRS1975

Second-order small-disturbance solutions for hypersonic flow over power-law bodies

Similarity solutions were found which give the adiabatic flow of an ideal gas about two-dimensional and axisymmetric power-law bodies at infinite Mach number to second order in the body slenderness parameter. The flow variables were expressed as a sum of zero-order and perturbation similarity functions for which the axial variations in the flow equations separated out. The resulting similarity equations were integrated numerically. The solutions, which are universal functions, are presented in graphic and tabular form. To avoid a singularity in the calculations, the results are limited to body power-law exponents greater than about 0.85 for the two-dimensional case and 0.75 for the axisymmetric case. Because of the entropy layer induced by the nose bluntness (for power-law bodies other than cones and wedges), only the pressure function is valid at the body surface. The similarity results give excellent agreement with the exact solutions for inviscid flow over wedges and cones having half-angles up to about 20 deg. They give good agreement with experimental shock-wave shapes and surface-pressure distributions for 3/4-power axisymmetric bodies, considering that Mach number and boundary-layer displacement effects are not included in the theory.

Townsend, J. C.↗

NASA NTRS1984

Advanced numerics for multi-dimensional fluid flow calculations

In recent years, there has been a growing interest in the development and use of mathematical models for the simulation of fluid flow, heat transfer and combustion processes in engineering equipment. The equations representing the multi-dimensional transport of mass, momenta and species are numerically solved by finite-difference or finite-element techniques. However despite the multiude of differencing schemes and solution algorithms, and the advancement of computing power, the calculation of multi-dimensional flows, especially three-dimensional flows, remains a mammoth task. The following discussion is concerned with the author's recent work on the construction of accurate discretization schemes for the partial derivatives, and the efficient solution of the set of nonlinear algebraic equations resulting after discretization. The present work has been jointly supported by the Ramjet Engine Division of the Wright Patterson Air Force Base, Ohio, and the NASA Lewis Research Center.

Vanka, S. P.↗

NASA NTRS1991

Aerodynamics of powered missile separation from a wing

A 3D dynamic 'chimera' algorithm that solves the thin-layer Navier-Stokes equations over multiple moving bodies was modified to numerically simulate the aerodynamics, missile dynamics, and missile plume of a finless missile separating from a wing in transonic flow. A powered missile separation case was considered to examine the influence of the missile and plume on the wing. The wing and missile is at a two degree angle of attack. The computational results show the details of the flow field.

Shanks, S. P.↗

NASA NTRS1972

The large Reynolds number - Asymptotic theory of turbulent boundary layers.

A self-consistent, asymptotic expansion of the one-point, mean turbulent equations of motion is obtained. Results such as the velocity defect law and the law of the wall evolve in a relatively rigorous manner, and a systematic ordering of the mean velocity boundary layer equations and their interaction with the main stream flow are obtained. The analysis is extended to the turbulent energy equation and to a treatment of the small scale equilibrium range of Kolmogoroff; in velocity correlation space the two-thirds power law is obtained. Thus, the two well-known 'laws' of turbulent flow are imbedded in an analysis which provides a great deal of other information.

Mellor, G. L.↗

NASA NTRS1978

Integral method for the calculation of three-dimensional, laminar and turbulent boundary layers

The method for turbulent flows is a further development of an existing method; profile families with two parameters and a lag entrainment method replace the simple entrainment method and power profiles with one parameter. The method for laminar flows is a new development. Moment of momentum equations were used for the solution of the problem, the profile families were derived from similar solutions of boundary layer equations. Laminar and turbulent flows at the wings were calculated. The influence of wing tapering on the boundary layer development was shown. The turbulent boundary layer for a revolution ellipsoid is calculated for 0 deg and 10 deg incidence angles.

Stock, H. W.↗

NASA NTRS1973

Response of panels to turbulence-induced, surface-pressure fluctuations and resulting acoustic radiation to the flow field.

The response of finite rectangular panels, excited by turbulent boundary layers and the resulting acoustical radiation into the flow field is studied. The method of normal modes and the technique of spectral analysis are used to compute the power spectra of the panel amplitude and strain response. Computed results are compared with the corresponding response measurements for panels exposed to attached and separated flows at supersonic speeds and attached flow at subsonic speeds. The thin plate and the convected wave equations are coupled through the boundary condition on the panel to give a formula for the radiation pressure power spectra. A formula for the acoustical damping ratio of the panel is obtained through the principle of virtual work.-

Chyu, W. J.↗

NASA NTRS1991

The free compressible viscous vortex

The present study investigates the effects of compressibility on free (unsteady) viscous heat-conducting vortices. Analytical solutions are found in the limit of large but finite Reynolds number and small but finite Mach number. It is shown that the spreading of the vortex causes a radial flow. This flow is given by the solution of an ordinary differential equation, which gives the dependence of the radial velocity on the tangential velocity, density, and temperature profiles of the vortex. Estimates of the radial velocity found by solving this equation are found to be in good agreement with numerical solutions of the full equations. The equations for the viscous evolution are expanded in powers of Mach number to obtain detailed analytical solutions. It is shown that swirling axisymmetric compressible flows generate negative radial velocities far from the vortex core owing to viscous effects, regardless of the initial distributions of vorticity, density, and entropy.

Colonius, Tim↗

NASA NTRS1976

Optimization of suppression for two-element treatment liners for turbomachinery exhaust ducts

Sound wave propagation in a soft-walled rectangular duct with steady uniform flow was investigated at exhaust conditions, incorporating the solution equations for sound wave propagation in a rectangular duct with multiple longitudinal wall treatment segments. Modal analysis was employed to find the solution equations and to study the effectiveness of a uniform and of a two-sectional liner in attenuating sound power in a treated rectangular duct without flow (M = 0) and with uniform flow of Mach 0.3. Two-segment liners were shown to increase the attenuation of sound as compared to a uniform liner. The predicted sound attenuation was compared with measured laboratory results for an optimized two-segment suppressor. Good correlation was obtained between the measured and predicted suppressions when practical variations in the modal content and impedance were taken into account. Two parametric studies were also completed.

Motsinger, R. E.↗

NASA NTRS1974

Second-order small disturbance theory for hypersonic flow over power-law bodies

A mathematical method for determining the flow field about power-law bodies in hypersonic flow conditions is developed. The second-order solutions, which reflect the effects of the second-order terms in the equations, are obtained by applying the method of small perturbations in terms of body slenderness parameter to the zeroth-order solutions. The method is applied by writing each flow variable as the sum of a zeroth-order and a perturbation function, each multiplied by the axial variable raised to a power. The similarity solutions are developed for infinite Mach number. All results obtained are for no flow through the body surface (as a boundary condition), but the derivation indicates that small amounts of blowing or suction through the wall can be accommodated.

Townsend, J. C.↗

NASA NTRS1980

Prediction of noise constrained optimum takeoff procedures

An optimization method is used to predict safe, maximum-performance takeoff procedures which satisfy noise constraints at multiple observer locations. The takeoff flight is represented by two-degree-of-freedom dynamical equations with aircraft angle-of-attack and engine power setting as control functions. The engine thrust, mass flow and noise source parameters are assumed to be given functions of the engine power setting and aircraft Mach number. Effective Perceived Noise Levels at the observers are treated as functionals of the control functions. The method is demonstrated by applying it to an Advanced Supersonic Transport aircraft design. The results indicate that automated takeoff procedures (continuously varying controls) can be used to significantly reduce community and certification noise without jeopardizing safety or degrading performance.

Padula, S. L.↗

NASA NTRS1967

Theoretical Study of Natural Convection Flows in Closed-End Cylindrical Vessels Final Report

This study is concerned with the analytical solutions of natural convection flows in closed-end cylindrical vessels to obtain exact solutions of temperature and velocity distribution in the laminar flow region under steady state condition. The temperature and velocity distributions, in general power series of displacements, are substituted into the three basic equations of continuity, momentum and energy. The relationships between coefficients of all powers are obtained through initial and boundary conditions and recurrence formulae. For constant wall temperature conditions the general solution of temperature and velocity may be expressed as a function of displacement, geometry ratio and Rayleigh number. Prandtl number does not enter as an independent parameter.

Convective flow↗

NASA NTRS1974

Analysis of laminar flow between stationary and rotating disks with inflow

The laminar flow between a rotating and a stationary disk with inflow was analyzed. Solutions to the dimensionless governing equations are sought by expanding each of the velocity components in powers of inverse radius. The equations to leading order are those for the configuration with no inflow. The subsequent orders yield sets of linear ordinary differential equations. Solutions are obtained for the first two of these subsequent orders. The solutions indicate that inflow tends to increase the magnitude of the azimuthal velocity in the flow between the two disks and to decrease the torque on the rotating disk. For Prandtl number one, an energy integral is obtained which relates the temperature distribution to the velocity distribution for all Reynolds numbers and therefore eliminates the needs for separate solution of the energy equation.

Rohatgi, U.↗

NASA NTRS1981

Verification of reflectance models in turbid waters

Inherent optical parameters of very turbid waters were used to evaluate existing water reflectance models. Measured upwelling radiance spectra and Monte Carlo simulations of the radiative transfer equations were compared with results from models based upon two flow, quasi-single scattering, augmented isotropic scattering, and power series approximation. Each model was evaluated for three separate components of upwelling radiance: (1) direct sunlight; (2) diffuse skylight; and (3) internally reflected light. Limitations of existing water reflectance models as applied to turbid waters and possible applications to the extraction of water constituent information are discussed.

Tanis, F. J.↗

NASA NTRS1988

Evaluation of the communications impact of a low power arcjet thruster

The interaction of a 1 kW arcjet thruster plume with a communications signal is evaluated. A two-parameter, source flow equation has been used to represent the far flow field distribution of the arcjet plume in a realistic spacecraft configuration. Modelling the plume as a plasma slab, the interaction of the plume with a 4 GHz communications signal is then evaluated in terms of signal attenuation and phase shift between transmitting and receiving antennas. Except for propagation paths which pass very near the arcjet source, the impacts to transmission appear to be negligible. The dominant signal loss mechanism is refraction of the beam rather than absorption losses due to collisions. However, significant reflection of the signal at the sharp vacuum-plasma boundary may also occur for propagation paths which pass near the source.

Carney, Lynnette M.↗

NASA NTRS1988

Evaluation of the communications impact of a low power arcjet thruster

Carney, Lynnette M.↗