Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “polymer theory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Chemoviscosity modeling for thermosetting resins - I

A new analytical model for chemoviscosity variation during cure of thermosetting resins was developed. This model is derived by modifying the widely used WLF (Williams-Landel-Ferry) Theory in polymer rheology. Major assumptions involved are that the rate of reaction is diffusion controlled and is linearly inversely proportional to the viscosity of the medium over the entire cure cycle. The resultant first order nonlinear differential equation is solved numerically, and the model predictions compare favorably with experimental data of EPON 828/Agent U obtained on a Rheometrics System 4 Rheometer. The model describes chemoviscosity up to a range of six orders of magnitude under isothermal curing conditions. The extremely non-linear chemoviscosity profile for a dynamic heating cure cycle is predicted as well. The model is also shown to predict changes of glass transition temperature for the thermosetting resin during cure. The physical significance of this prediction is unclear at the present time, however, and further research is required. From the chemoviscosity simulation point of view, the technique of establishing an analytical model as described here is easily applied to any thermosetting resin. The model thus obtained is used in real-time process controls for fabricating composite materials.

Hou, T. H.↗
NASA NTRS1988

A semi-empirical approach for the chemoviscosity modeling of reactive resin system

A new analytical model for simulating chemoviscosity of a thermosetting resin is presented. The model is developed on the basis of the Williams-Landel-Ferry (WLF, 1955) polymer rheology theory for the thermoplastic materials, which was modified to account for the factor of reaction time by introducing a relationship between the glass transition temperature and the degree of cure of the resin system. Theoretical predictions of the chemoviscosity profiles under dynamic curing conditions are shown to compare favorably with the experimental data obtained on the Hercules 3501-6 resin system cured under seven isothermal conditions.

Hou, T. H.↗
NASA NTRS1984

Phase stability of weakly crosslinked interpenerating polymer networks

A phenomenological theory is formulated for chemically quenched binary interpenetrating polymer networks (IPNs), considering both simultaneously crosslinked networks and sequentially crosslinked networks, as well as pseudointerpenetrating networks (where only one component is crosslinked and the other is a linear polymer). The construction of free energy functionals for homogeneous weakly crosslinked IPNs and pseudo-IPNs and their spinodal curves and critical points of unmixing is described. These free energy functionals are augmented with gradient energy terms in order to consider effects due to spatially varying small inhomogeneities in the network chain concentration. The dynamic response and the initial spinodal decomposition of IPNs are discussed.

Binder, K.↗
NASA NTRS1998

A model of cell wall expansion based on thermodynamics of polymer networks

A theory of cell wall extension is proposed. It is shown that macroscopic properties of cell walls can be explained through the microscopic properties of interpenetrating networks of cellulose and hemicellulose. The qualitative conclusions of the theory agree with the existing experimental data. The dependence of the cell wall yield threshold on the secretion of the wall components is discussed.

NASA Discipline Plant Biology↗
DOE OSTI2024

Liquid state theory of the structure of model polymerized ionic liquids

We employ polymer integral equation theory to study a simplified model of semiflexible polymerized ionic liquids (PolyILs) that interact via hard core repulsions and short range screened Coulomb interactions. The multi-scale structure in real and Fourier space of PolyILs (ions chosen to mimic Li, Na, K, Br, PF 6 , and TFSI) are determined as a function of melt density, Coulomb interaction strength, and ion size. Comparisons with a homopolymer melt, a neutral polymer–solvent-like athermal mixture, and an atomic ionic liquid are carried out to elucidate the distinct manner that ions mediate changes of polymer packing, the role of excluded volume effects, and the influence of chain connectivity, respectively. The effect of Coulomb strength depends in a rich manner on ion size and density, reflecting the interplay of steric packing, ion adsorption, and charge layering. Ion-mediated bridging of monomers is found, which intensifies for larger ions. Intermediate range charge layering correlations are characterized by a many-body screening length that grows with PolyIL density, cooling, and Coulomb strength, in disagreement with Debye–Hückel theory, but in accord with experiments. Qualitative differences in the collective structure, including an ion-size-dependent bifurcation of the polymer structure factor peak and pair correlation function, are predicted. The monomer cage order parameter increases significantly, but its collective ion counterpart decreases, as ions become smaller. Such behaviors allow one to categorize PolyILs into two broad classes of small and large ions. Furthermore, dynamical implications of the predicted structural results are qualitatively discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

A hereditary integral, transient network approach to modeling permanent set and viscoelastic response in polymers

An efficient numerical framework is presented for modeling viscoelasticity and permanent set of polymers. It is based on the hereditary integral form of transient network theory, in which polymer chains belong to distinct networks each with different natural equilibrium states. Chains continually detach from previously formed networks and reattach to new networks in a state of zero stress. The free energy of these networks is given in terms of the deformation gradient relative to the configuration at which the network was born . A decomposition of the kernel for various free energies allows for a recurrence relationship to be established, bypassing the need to integrate over all time history. The technique is established for both highly compressible and nearly incompressible materials through the use of neo-Hookean, Blatz–Ko, Yeoh, and Ogden-Hill material models. Multiple examples are presented showing the ability to handle rate-dependent response and residual strains under complex loading histories.

Finite element method↗
DOE OSTI2023

Time–Concentration Superposition for Linear Viscoelasticity of Polymer Solutions

The concentration dependence of linear viscoelastic properties of polymer solutions is a well-studied topic in polymer physics. Dynamic scaling theories allow qualitative predictions of polymer solution rheology, but quantitative predictions are still limited to model polymers. Meanwhile, the scaling properties of non-model polymer solutions must be determined experimentally. In present paper, the time–concentration superposition (TCS) of experimental data is shown to be a robust procedure for studying the concentration scaling properties of binary and ternary polymer solutions. TCS can not only identify whether power law scaling may exist or not, and over which concentration range, but also unambiguously estimate the concentration scaling exponents of linear viscoelastic properties for a range of non-model polymer solutions.

42 ENGINEERING↗
DOE OSTI2024

Theory of Ion-Mediated Segmental Localization, Activated Structural Relaxation, and the Glass Transition in Polymerized Ionic Liquids

Here we combine polymer integral equation theory for structural correlations with a force-level theory for activated segmental relaxation to construct a microscopic theory for how ions modify the onset of segmental localization, the polymer alpha relaxation time, and glass transition temperature, T g , in dry polymerized ionic liquids (PolyILs). Our most important findings concerning the behavior of T g are (i) a weak dependence on anion–cation Coulomb attraction strength due to strong decoupling of ion and segmental dynamics, (ii) strong reduction with increasing mobile ion size due to both plasticization effects and weakening of ion-modified monomer caging, and (iii) increase with backbone rigidity and intrachain dynamic cooperativity. We quantitatively estimate T g variations as ion size and polymer static and dynamic rigidity are widely varied. The experimental data of 19 PolyILs are organized into a specific pattern consistent with the theoretical predictions with glass transition temperatures varying over a very wide range (~250 K) as observed experimentally. Based on the theoretical results, suggestions are made concerning the search for high conductivity Li- or Na-based PolyILs based on further lowering of T g via new polymer synthesis. Calculations of the alpha time as a function of packing fraction reveal the dynamic fragility increases for larger mobile ions, a more flexible backbone, and/or a smaller degree of intrachain dynamic cooperativity, as a consequence of the increasing importance of collective elasticity in determining the activation barrier. An analysis of transient segmental localization and a crossover to activated dynamics reveals similar, but not identical, trends as predicted at the laboratory vitrification timescale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Self-consistent hopping theory of activated relaxation and diffusion of dilute penetrants in dense crosslinked polymer networks

We generalize a microscopic statistical mechanical theory of the activated dynamics of dilute spherical penetrants in glass-forming liquids to study the influence of crosslinking in polymer networks on the penetrant relaxation time and diffusivity over a wide range of temperature and crosslink fraction (f n ). Our calculations are relevant to recent experimental studies of a nm-sized molecule diffusing in poly-(n-butyl methacrylate) networks. The theory predicts the penetrant relaxation time increases exponentially with the glass transition temperature, T g (f n ), which grows roughly linearly with the square root of fn due to the coupling of local hopping to longer-range collective elasticity. Moreover, T g is also found to be proportional to a geometric confinement parameter defined as the ratio of the penetrant diameter to the mean network mesh size. The decoupling ratio of the penetrant and Kuhn segment alpha times displays a complex non-monotonic dependence on f n and temperature that is well collapsed based on the variable T g (f n )/T. A model for the penetrant diffusion constant that combines activated relaxation and entropic mesh confinement is proposed, which results in a significantly stronger suppression of mass transport with degree of effective supercooling than predicted for the penetrant alpha time. Furthermore, this behavior corresponds to a new network-based type of “decoupling” of diffusion and relaxation. In contrast to the diffusion of larger nanoparticles in high temperature rubbery networks, our analysis in the supercooled regime suggests that for the penetrants studied the mesh confinement effects are of secondary importance relative to the consequences of crosslink-induced slowing down of activated hopping of glassy physics origin.

Chemistry↗
DOE OSTI2021

Revisiting group contribution theory for estimating fractional free volume of microporous polymer membranes

Fractional free volume (FFV) is a commonly used metric for the development of structure–property relationships for polymer membranes. The most common method to calculate FFV uses Bondi's group contribution method, first introduced in 1964. While updated in 1997, there has not been a significant compilation of new structural motifs since the advent of linear microporous polymers. Here, in this study, we critically examined the assumptions in Bondi's original method and provide four recommendations to streamline and improve the accuracy of calculating van der Waals volume (V W ) for any group. Using these recommendations, we created an updated list of (V W ) values for structural groups commonly present in microporous polymers. The (V W ) and FFV values were then calculated for a database of 123 microporous and high free volume polymers from the literature, showing an average 7% decrease in (V W ) and corresponding increase in FFV by a factor of 24% when compared to prior group contribution correlations in the literature. The significant apparent increase in estimated FFV provides a new perspective to understand and interpret the role of free volume on the separation performance of linear microporous polymers. Additionally, standardization of the group contribution method allows for the direct comparison of FFV values across studies.

42 ENGINEERING↗
NASA NTRS2004

Implementation of Improved Transverse Shear Calculations and Higher Order Laminate Theory Into Strain Rate Dependent Analyses of Polymer Matrix Composites

A numerical procedure has been developed to investigate the nonlinear and strain rate dependent deformation response of polymer matrix composite laminated plates under high strain rate impact loadings. A recently developed strength of materials based micromechanics model, incorporating a set of nonlinear, strain rate dependent constitutive equations for the polymer matrix, is extended to account for the transverse shear effects during impact. Four different assumptions of transverse shear deformation are investigated in order to improve the developed strain rate dependent micromechanics model. The validities of these assumptions are investigated using numerical and theoretical approaches. A method to determine through the thickness strain and transverse Poisson's ratio of the composite is developed. The revised micromechanics model is then implemented into a higher order laminated plate theory which is modified to include the effects of inelastic strains. Parametric studies are conducted to investigate the mechanical response of composite plates under high strain rate loadings. Results show the transverse shear stresses cannot be neglected in the impact problem. A significant level of strain rate dependency and material nonlinearity is found in the deformation response of representative composite specimens.

Zhu, Lin-Fa↗
NASA NTRS1988

Prediction of the microyield strength of polymer matrix composites

A theory for the prediction of the creep and the microyield strength of composite laminates with viscoelastic matrices has been developed and tested. Precise creep curves from three laminates with arbitrary orientations provide the necessary input data. The time-dependent lamina properties are derived for subsequent use with standard laminate codes. Both the level and the shape of creep and strain recovery curves can be predicted. Extensions of the theory to include the effects of microcracking are outlined.

Wolff, Ernest G.↗
NASA NTRS2000

Implementation of Laminate Theory Into Strain Rate Dependent Micromechanics Analysis of Polymer Matrix Composites

A research program is in progress to develop strain rate dependent deformation and failure models for the analysis of polymer matrix composites subject to impact loads. Previously, strain rate dependent inelastic constitutive equations developed to model the polymer matrix were implemented into a mechanics of materials based micromechanics method. In the current work, the computation of the effective inelastic strain in the micromechanics model was modified to fully incorporate the Poisson effect. The micromechanics equations were also combined with classical laminate theory to enable the analysis of symmetric multilayered laminates subject to in-plane loading. A quasi-incremental trapezoidal integration method was implemented to integrate the constitutive equations within the laminate theory. Verification studies were conducted using an AS4/PEEK composite using a variety of laminate configurations and strain rates. The predicted results compared well with experimentally obtained values.

Goldberg, Robert K.↗
DOE OSTI2023

Hydrogen Bond Network Disruption by Hydration Layers in Water Solutions with Salt and Hydrogen-Bonding Polymers (PEO)

A mean field theory model describing the interaction of ion hydration layers with the network of hydrogen bonds of both water and the nonionic polymer poly(ethylene oxide) (PEO) is presented. The predictions of the model for types and statistics of hydrogen bonds, the number of water molecules bound to PEO, or their dependence on temperature are successfully verified from all-atom simulations at different NaCl and PEO concentrations. Furthermore, our simulations show that the binding of cations to PEO increases monotonically with salt concentration, in agreement with recent experimental results, through a mechanism in which the sum of the number of bound water and cations is independent of salt concentration. Here, the model introduced is general and can describe any salt or hydrogen-bond-forming polymer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

On the mechanism of marine fouling-prevention performance of oil-containing silicone elastomers

For many decades, silicone elastomers with oil incorporated have served as fouling-release coating for marine applications. In a comprehensive study involving a series of laboratory-based marine fouling assays and extensive global field studies of up to 2-year duration, we compare polydimethylsiloxane (PDMS) coatings of the same composition loaded with oil via two different methods. One method used a traditional, one-pot pre-cure oil addition approach (o-PDMS) and another method used a newer post-cure infusion approach (i-PDMS). The latter displays a substantial improvement in biofouling prevention performance that exceeds established commercial silicone-based fouling-release coating standards. We interpret the differences in performance between one-pot and infused PDMS by developing a mechanistic model based on the Flory–Rehner theory of swollen polymer networks. Using this model, we propose that the chemical potential of the incorporated oil is a key consideration for the design of future fouling-release coatings, as the improved performance is driven by the formation and stabilization of an anti-adhesion oil overlayer on the polymer surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Predicting the viscoplastic response of a crystallizing fluoropolymer using transient network theory

We employ a molecular theory of dynamic polymer networks to describe the viscoplastic response of rubbery FK-800, a thermoplastic copolymer of chlorotrifluoroethylene and vinylidene fluoride, over a broad range of thermal histories. The kinetics of crystallization at different annealing temperatures was modeled using a modified Avrami equation, whose parameters were found to evolve through simple relationships over the full temperature range of the rubbery state. By fitting experimental compression data, we discovered predictable trends for the physical parameters in our mechanical model over its full range of crystallinities (up to ≈20%) and provided insights based on molecular-level physics to justify them. Using this, an end-to-end model was developed to predict the yielding and post-yield behavior of rubbery FK-800 for arbitrary thermal histories. The model successfully predicted the highly nonlinear evolution of characteristic mechanical signatures (stiffness, yield point, post-yield drop) throughout the crystallization process. A statistical analysis of variance test was employed to determine that the measured variations in the mechanical behavior of rubbery FK-800 are primarily dictated by its fractional crystallinity, regardless of its exact thermal history.

36 MATERIALS SCIENCE↗