Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “phosphonium”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

Achieving Continuous Anion Transport Domains Using Block Copolymers Containing Phosphonium Cations

Triblock and diblock copolymers based on isoprene (Ip) and chloromethylstyrene (CMS) were synthesized in this paper by sequential polymerization using reversible addition–fragmentation chain transfer radical polymerization (RAFT). The block copolymers were quaternized with tris(2,4,6-trimethoxyphenyl)phosphine (Ar 3 P) to prepare soluble ionomers. The ionomers were cast from chloroform to form anion exchange membranes (AEMs) with highly ordered morphologies. At low volume fractions of ionic blocks, the ionomers formed lamellar morphologies, while at moderate volume fractions (≥30% for triblock and ≥22% for diblock copolymers) hexagonal phases with an ionic matrix were observed. Ion conductivities were higher through the hexagonal phase matrix than in the lamellar phases. Finally, promising chloride conductivities (20 mS/cm) were achieved at elevated temperatures and humidified conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Phosphonium-Containing Block Copolymer Anion Exchange Membranes: Effect of Quaternization Level on Bulk and Surface Morphologies at Hydrated and Dehydrated States

Diblock copolymers of isoprene and chloromethylstyrene were synthesized by nitroxide-mediate polymerization. The polychloromethylstyrene block was quaternized with tris(trimethoxyphenyl)phosphine (P(Ph(OMe) 3 ) 3 ) or triphenyl-phosphine (P(Ph) 3 ). Membranes with ion-exchange capacity (IEC) ranging from 0.87 to 2.35 mmol/g were prepared. The bulk morphology was investigated via small-angle X-ray scattering and transmission electron microscopy, where hexagonal and body-centered cubic morphologies were observed. The surface morphology was revealed by atomic force microscopy where both parallel and perpendicular alignments were observed. Compared to P(Ph(OMe) 3 ) 3 , P(Ph) 3 exhibits higher quaternization efficiency due to less steric hindrance. Partially quaternized membranes were prepared using P(Ph) 3 , and the dependence of domain size on the quaternization level is discussed. The morphologies as a function of relative humidity were investigated. For high IEC membranes, although bulk scattering showed small changes in d -spacing, large changes in domain size on the surface occurred between hydrated and dehydrated conditions. Finally, further investigations of morphological reversibility by humidity cycling showed good recovery between humid and dry conditions, indicating that the expansion and contraction of channels is a reversible process.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High Anion Conductivity and Low Water Uptake of Phosphonium Containing Diblock Copolymer Membranes

Poly[(styrene)- block -((2-acryloxy)ethyltributylphosphonium bromide)] diblock copolymers (STBP) were synthesized in two steps. First, reversible addition-fragmentation chain transfer polymerization was used to synthesize the diblock copolymer precursors poly[(styrene)- block -(bromoethyl acrylate)] (SBEA), followed by functionalization with tributylphosphine. Copolymers with overall molecular weights ranging from 31 to 87 kg/mol were synthesized. The volume fraction of the ion-containing monomers in the copolymers was fixed at about 0.57. Self-assembly of these copolymers into ordered morphologies with tunable domain sizes was demonstrated by small-angle X-ray scattering. The effect of morphology on water uptake and bromide ion conductivity was explored in samples equilibrated in liquid water. The use of the pendant tributylphosphonium cations, which have some hydrophobic character, results in low water uptake and high anionic conductivity. In conclusion, the conductivity increases with increasing domain size while water uptake is unaffected by domain size.

Cotanda, Pepa↗

Molecular insight into the lower critical solution temperature transition of aqueous alkyl phosphonium benzene sulfonates

Abstract Ionic liquid (IL)-water mixtures can exhibit a lower critical solution temperature (LCST) transition, but changes in long-range order and local molecular environment during this transition are not comprehensively understood. Here we show that in IL-H 2 O LCST mixtures, the IL forms loosely held aggregate structures that grow in size leading up to a critical temperature, whereas the aggregation of a fully miscible aqueous mixture, obtained by minor chemical modification of the anion, decreases with increasing temperature. Radial distribution functions from molecular dynamics simulations support the observation of aggregation phenomena in the IL-H 2 O mixtures. A local molecular structure of the ions is derived from multi-dimensional NMR experiments in conjunction with reported molecular dynamics simulations. In addition to considerable shifts of water’s hydrogen bonding network in the fully miscible phase, by NMR we observe the anion’s protons response to the intermolecular thermal environment and the intramolecular environment and find that the responses are determined by the sulfonate ionic functional group.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Self-crosslinking for dimensionally stable and solvent-resistant quaternary phosphonium based hydroxide exchange membranes

A simple self-crosslinking strategy, without the needs of a separate crosslinker or a catalyst, is reported here. The crosslinking drastically lowers the water swelling ratio (e.g., 5-10 folds reduction) and provides excellent solvent-resistance. The self-crosslinked membrane (DCL: 5.3%) shows the highest IEC-normalized hydroxide conductivity among all crosslinked HEMs reported.

Gu, S↗

Communication: Anomalous temperature dependence of the intermediate range order in phosphonium ionic liquids

In a recent article by the Castner and Margulis groups [Faraday Discuss. 154, 133 (2012)], we described in detail the structure of the tetradecyltrihexylphosphonium bis(trifluoromethylsulfonyl)-amide ionic liquid as a function of temperature using X-ray scattering, and theoretical partitions of the computationally derived structure function. Interestingly, and as opposed to the case in most other ionic-liquids, the first sharp diffraction peak or prepeak appears to increase in intensity as temperature is increased. This phenomenon is counter intuitive as one would expect that intermediate range order fades as temperature increases. This Communication shows that a loss of hydrophobic tail organization at higher temperatures is counterbalanced by better organization of polar components giving rise to the increase in intensity of the prepeak.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Affordable Hydrogen Fuel Cell Vehicles: Quaternary Phosphonium Based Hydroxide Exchange Membranes

Broad Funding Opportunity Announcement Project: The University of Delaware is developing a new fuel cell membrane for vehicles that relies on cheaper and more abundant materials than those used in current fuel cells. Conventional fuel cells are very acidic, so they require acid-resistant metals like platinum to generate electricity. The University of Delaware is developing an alkaline fuel cell membrane that can operate in a non-acidic environment where cheaper materials like nickel and silver, instead of platinum, can be used. In addition to enabling the use of cheaper metals, the University of Delaware’s membrane is 500 times less expensive than other polymer membranes used in conventional fuel cells.

ARPA-E↗

Phosphonium-based ionic liquids and their use in the capture of polluting gases

An ionic liquid composition having the following chemical structural formula: ##STR00001## wherein R.sup.1, R.sup.2, R.sup.3, and R.sup.4 are independently selected from hydrocarbon groups containing at least 1 and up to 20 carbon atoms, and X.sup.- is a cyclic anion that possesses a negatively-charged group reactive with a gaseous electrophilic species, particularly carbon dioxide or sulfur dioxide. Methods for capturing a gaseous electrophilic species, such as CO.sub.2 or SO.sub.2, by contacting the gaseous electrophilic species with an ionic liquid according to Formula (1) are also described.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ionic liquids containing symmetric quaternary phosphonium cations and phosphorus-containing anions, and their use as lubricant additives

An ionic liquid composition having the following generic structural formula: ##STR00001## wherein R 1 , R 2 , R 3 , and R 4 are equivalent and selected from hydrocarbon groups containing at least three carbon atoms, and X - is a phosphorus-containing anion, particularly an organophosphate, organophosphonate, or organophosphinate anion, or a thio-substituted analog thereof containing hydrocarbon groups with at least three carbon atoms. Also described are lubricant compositions comprising the above ionic liquid and a base oil, wherein the ionic liquid is dissolved in the base oil. Further described are methods for applying the ionic liquid or lubricant composition onto a mechanical device for which lubrication is beneficial, with resulting improvement in friction reduction, wear rate, and/or corrosion inhibition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ionic liquids containing symmetric quaternary phosphonium cations and phosphorus-containing anions, and their use as lubricant additives

An ionic liquid composition having the following generic structural formula: wherein R1, R2, R3, and R4 are equivalent and selected from hydrocarbon groups containing at least three carbon atoms, and X− is a phosphorus-containing anion, particularly an organophosphate, organophosphonate, or organophosphinate anion, or a thio-substituted analog thereof containing hydrocarbon groups with at least three carbon atoms. Also described are lubricant compositions comprising the above ionic liquid and a base oil, wherein the ionic liquid is dissolved in the base oil. Further described are methods for applying the ionic liquid or lubricant composition onto a mechanical device for which lubrication is beneficial, with resulting improvement in friction reduction, wear rate, and/or corrosion inhibition.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ionic liquids containing quaternary ammonium and phosphonium cations, and their use as environmentally friendly lubricant additives

An ionic liquid composition having the following generic structural formula: wherein Z is N or P, and R 1 , R 2 , R 3 , and R 4 are independently selected from hydrogen atom and hydrocarbon groups having one to four carbon atoms with optional interconnection to form a cyclic group that includes Z, and wherein R 1 , R 2 , R 3 , and R 4 are all hydrocarbon groups when Z is P, and X− is a phosphorus-containing or carboxylate anion, particularly an organophosphate, organophosphonate, or organophosphinate anion, or a thio-substituted analog thereof containing hydrocarbon groups with at least three carbon atoms. Also described are lubricant compositions comprising the above ionic liquid and a base lubricant, wherein the ionic liquid is dissolved in the base lubricant. Further described are methods for applying the ionic liquid or lubricant composition onto a mechanical device for which lubrication is beneficial, with resulting improvement in friction reduction, wear rate, and/or corrosion inhibition.

Qu, Jun↗